mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 01:10:04 +00:00
![Carolyn Wyborny](/assets/img/avatar_default.png)
Recent commits have changed how EEPROM size is checked and if the size word is misconfigured, the driver will fail to load. This patch adds a check for invalid size word in the EEPROM and uses default size instead for 82576 parts. Reported-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2068 lines
55 KiB
C
2068 lines
55 KiB
C
/*******************************************************************************
|
|
|
|
Intel(R) Gigabit Ethernet Linux driver
|
|
Copyright(c) 2007-2009 Intel Corporation.
|
|
|
|
This program is free software; you can redistribute it and/or modify it
|
|
under the terms and conditions of the GNU General Public License,
|
|
version 2, as published by the Free Software Foundation.
|
|
|
|
This program is distributed in the hope it will be useful, but WITHOUT
|
|
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
more details.
|
|
|
|
You should have received a copy of the GNU General Public License along with
|
|
this program; if not, write to the Free Software Foundation, Inc.,
|
|
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
|
|
|
|
The full GNU General Public License is included in this distribution in
|
|
the file called "COPYING".
|
|
|
|
Contact Information:
|
|
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
|
|
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
|
|
*******************************************************************************/
|
|
|
|
/* e1000_82575
|
|
* e1000_82576
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/if_ether.h>
|
|
|
|
#include "e1000_mac.h"
|
|
#include "e1000_82575.h"
|
|
|
|
static s32 igb_get_invariants_82575(struct e1000_hw *);
|
|
static s32 igb_acquire_phy_82575(struct e1000_hw *);
|
|
static void igb_release_phy_82575(struct e1000_hw *);
|
|
static s32 igb_acquire_nvm_82575(struct e1000_hw *);
|
|
static void igb_release_nvm_82575(struct e1000_hw *);
|
|
static s32 igb_check_for_link_82575(struct e1000_hw *);
|
|
static s32 igb_get_cfg_done_82575(struct e1000_hw *);
|
|
static s32 igb_init_hw_82575(struct e1000_hw *);
|
|
static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *);
|
|
static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16 *);
|
|
static s32 igb_read_phy_reg_82580(struct e1000_hw *, u32, u16 *);
|
|
static s32 igb_write_phy_reg_82580(struct e1000_hw *, u32, u16);
|
|
static s32 igb_reset_hw_82575(struct e1000_hw *);
|
|
static s32 igb_reset_hw_82580(struct e1000_hw *);
|
|
static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *, bool);
|
|
static s32 igb_setup_copper_link_82575(struct e1000_hw *);
|
|
static s32 igb_setup_serdes_link_82575(struct e1000_hw *);
|
|
static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16);
|
|
static void igb_clear_hw_cntrs_82575(struct e1000_hw *);
|
|
static s32 igb_acquire_swfw_sync_82575(struct e1000_hw *, u16);
|
|
static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *, u16 *,
|
|
u16 *);
|
|
static s32 igb_get_phy_id_82575(struct e1000_hw *);
|
|
static void igb_release_swfw_sync_82575(struct e1000_hw *, u16);
|
|
static bool igb_sgmii_active_82575(struct e1000_hw *);
|
|
static s32 igb_reset_init_script_82575(struct e1000_hw *);
|
|
static s32 igb_read_mac_addr_82575(struct e1000_hw *);
|
|
static s32 igb_set_pcie_completion_timeout(struct e1000_hw *hw);
|
|
static s32 igb_reset_mdicnfg_82580(struct e1000_hw *hw);
|
|
static s32 igb_validate_nvm_checksum_82580(struct e1000_hw *hw);
|
|
static s32 igb_update_nvm_checksum_82580(struct e1000_hw *hw);
|
|
static s32 igb_update_nvm_checksum_with_offset(struct e1000_hw *hw,
|
|
u16 offset);
|
|
static s32 igb_validate_nvm_checksum_with_offset(struct e1000_hw *hw,
|
|
u16 offset);
|
|
static s32 igb_validate_nvm_checksum_i350(struct e1000_hw *hw);
|
|
static s32 igb_update_nvm_checksum_i350(struct e1000_hw *hw);
|
|
static const u16 e1000_82580_rxpbs_table[] =
|
|
{ 36, 72, 144, 1, 2, 4, 8, 16,
|
|
35, 70, 140 };
|
|
#define E1000_82580_RXPBS_TABLE_SIZE \
|
|
(sizeof(e1000_82580_rxpbs_table)/sizeof(u16))
|
|
|
|
/**
|
|
* igb_sgmii_uses_mdio_82575 - Determine if I2C pins are for external MDIO
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Called to determine if the I2C pins are being used for I2C or as an
|
|
* external MDIO interface since the two options are mutually exclusive.
|
|
**/
|
|
static bool igb_sgmii_uses_mdio_82575(struct e1000_hw *hw)
|
|
{
|
|
u32 reg = 0;
|
|
bool ext_mdio = false;
|
|
|
|
switch (hw->mac.type) {
|
|
case e1000_82575:
|
|
case e1000_82576:
|
|
reg = rd32(E1000_MDIC);
|
|
ext_mdio = !!(reg & E1000_MDIC_DEST);
|
|
break;
|
|
case e1000_82580:
|
|
case e1000_i350:
|
|
reg = rd32(E1000_MDICNFG);
|
|
ext_mdio = !!(reg & E1000_MDICNFG_EXT_MDIO);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
return ext_mdio;
|
|
}
|
|
|
|
static s32 igb_get_invariants_82575(struct e1000_hw *hw)
|
|
{
|
|
struct e1000_phy_info *phy = &hw->phy;
|
|
struct e1000_nvm_info *nvm = &hw->nvm;
|
|
struct e1000_mac_info *mac = &hw->mac;
|
|
struct e1000_dev_spec_82575 * dev_spec = &hw->dev_spec._82575;
|
|
u32 eecd;
|
|
s32 ret_val;
|
|
u16 size;
|
|
u32 ctrl_ext = 0;
|
|
|
|
switch (hw->device_id) {
|
|
case E1000_DEV_ID_82575EB_COPPER:
|
|
case E1000_DEV_ID_82575EB_FIBER_SERDES:
|
|
case E1000_DEV_ID_82575GB_QUAD_COPPER:
|
|
mac->type = e1000_82575;
|
|
break;
|
|
case E1000_DEV_ID_82576:
|
|
case E1000_DEV_ID_82576_NS:
|
|
case E1000_DEV_ID_82576_NS_SERDES:
|
|
case E1000_DEV_ID_82576_FIBER:
|
|
case E1000_DEV_ID_82576_SERDES:
|
|
case E1000_DEV_ID_82576_QUAD_COPPER:
|
|
case E1000_DEV_ID_82576_QUAD_COPPER_ET2:
|
|
case E1000_DEV_ID_82576_SERDES_QUAD:
|
|
mac->type = e1000_82576;
|
|
break;
|
|
case E1000_DEV_ID_82580_COPPER:
|
|
case E1000_DEV_ID_82580_FIBER:
|
|
case E1000_DEV_ID_82580_QUAD_FIBER:
|
|
case E1000_DEV_ID_82580_SERDES:
|
|
case E1000_DEV_ID_82580_SGMII:
|
|
case E1000_DEV_ID_82580_COPPER_DUAL:
|
|
case E1000_DEV_ID_DH89XXCC_SGMII:
|
|
case E1000_DEV_ID_DH89XXCC_SERDES:
|
|
case E1000_DEV_ID_DH89XXCC_BACKPLANE:
|
|
case E1000_DEV_ID_DH89XXCC_SFP:
|
|
mac->type = e1000_82580;
|
|
break;
|
|
case E1000_DEV_ID_I350_COPPER:
|
|
case E1000_DEV_ID_I350_FIBER:
|
|
case E1000_DEV_ID_I350_SERDES:
|
|
case E1000_DEV_ID_I350_SGMII:
|
|
mac->type = e1000_i350;
|
|
break;
|
|
default:
|
|
return -E1000_ERR_MAC_INIT;
|
|
break;
|
|
}
|
|
|
|
/* Set media type */
|
|
/*
|
|
* The 82575 uses bits 22:23 for link mode. The mode can be changed
|
|
* based on the EEPROM. We cannot rely upon device ID. There
|
|
* is no distinguishable difference between fiber and internal
|
|
* SerDes mode on the 82575. There can be an external PHY attached
|
|
* on the SGMII interface. For this, we'll set sgmii_active to true.
|
|
*/
|
|
phy->media_type = e1000_media_type_copper;
|
|
dev_spec->sgmii_active = false;
|
|
|
|
ctrl_ext = rd32(E1000_CTRL_EXT);
|
|
switch (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) {
|
|
case E1000_CTRL_EXT_LINK_MODE_SGMII:
|
|
dev_spec->sgmii_active = true;
|
|
break;
|
|
case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
|
|
case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES:
|
|
hw->phy.media_type = e1000_media_type_internal_serdes;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* Set mta register count */
|
|
mac->mta_reg_count = 128;
|
|
/* Set rar entry count */
|
|
mac->rar_entry_count = E1000_RAR_ENTRIES_82575;
|
|
if (mac->type == e1000_82576)
|
|
mac->rar_entry_count = E1000_RAR_ENTRIES_82576;
|
|
if (mac->type == e1000_82580)
|
|
mac->rar_entry_count = E1000_RAR_ENTRIES_82580;
|
|
if (mac->type == e1000_i350)
|
|
mac->rar_entry_count = E1000_RAR_ENTRIES_I350;
|
|
/* reset */
|
|
if (mac->type >= e1000_82580)
|
|
mac->ops.reset_hw = igb_reset_hw_82580;
|
|
else
|
|
mac->ops.reset_hw = igb_reset_hw_82575;
|
|
/* Set if part includes ASF firmware */
|
|
mac->asf_firmware_present = true;
|
|
/* Set if manageability features are enabled. */
|
|
mac->arc_subsystem_valid =
|
|
(rd32(E1000_FWSM) & E1000_FWSM_MODE_MASK)
|
|
? true : false;
|
|
/* enable EEE on i350 parts */
|
|
if (mac->type == e1000_i350)
|
|
dev_spec->eee_disable = false;
|
|
else
|
|
dev_spec->eee_disable = true;
|
|
/* physical interface link setup */
|
|
mac->ops.setup_physical_interface =
|
|
(hw->phy.media_type == e1000_media_type_copper)
|
|
? igb_setup_copper_link_82575
|
|
: igb_setup_serdes_link_82575;
|
|
|
|
/* NVM initialization */
|
|
eecd = rd32(E1000_EECD);
|
|
|
|
nvm->opcode_bits = 8;
|
|
nvm->delay_usec = 1;
|
|
switch (nvm->override) {
|
|
case e1000_nvm_override_spi_large:
|
|
nvm->page_size = 32;
|
|
nvm->address_bits = 16;
|
|
break;
|
|
case e1000_nvm_override_spi_small:
|
|
nvm->page_size = 8;
|
|
nvm->address_bits = 8;
|
|
break;
|
|
default:
|
|
nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8;
|
|
nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? 16 : 8;
|
|
break;
|
|
}
|
|
|
|
nvm->type = e1000_nvm_eeprom_spi;
|
|
|
|
size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
|
|
E1000_EECD_SIZE_EX_SHIFT);
|
|
|
|
/*
|
|
* Added to a constant, "size" becomes the left-shift value
|
|
* for setting word_size.
|
|
*/
|
|
size += NVM_WORD_SIZE_BASE_SHIFT;
|
|
|
|
/*
|
|
* Check for invalid size
|
|
*/
|
|
if ((hw->mac.type == e1000_82576) && (size > 15)) {
|
|
printk("igb: The NVM size is not valid, "
|
|
"defaulting to 32K.\n");
|
|
size = 15;
|
|
}
|
|
nvm->word_size = 1 << size;
|
|
if (nvm->word_size == (1 << 15))
|
|
nvm->page_size = 128;
|
|
|
|
/* NVM Function Pointers */
|
|
nvm->ops.acquire = igb_acquire_nvm_82575;
|
|
if (nvm->word_size < (1 << 15))
|
|
nvm->ops.read = igb_read_nvm_eerd;
|
|
else
|
|
nvm->ops.read = igb_read_nvm_spi;
|
|
|
|
nvm->ops.release = igb_release_nvm_82575;
|
|
switch (hw->mac.type) {
|
|
case e1000_82580:
|
|
nvm->ops.validate = igb_validate_nvm_checksum_82580;
|
|
nvm->ops.update = igb_update_nvm_checksum_82580;
|
|
break;
|
|
case e1000_i350:
|
|
nvm->ops.validate = igb_validate_nvm_checksum_i350;
|
|
nvm->ops.update = igb_update_nvm_checksum_i350;
|
|
break;
|
|
default:
|
|
nvm->ops.validate = igb_validate_nvm_checksum;
|
|
nvm->ops.update = igb_update_nvm_checksum;
|
|
}
|
|
nvm->ops.write = igb_write_nvm_spi;
|
|
|
|
/* if part supports SR-IOV then initialize mailbox parameters */
|
|
switch (mac->type) {
|
|
case e1000_82576:
|
|
case e1000_i350:
|
|
igb_init_mbx_params_pf(hw);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* setup PHY parameters */
|
|
if (phy->media_type != e1000_media_type_copper) {
|
|
phy->type = e1000_phy_none;
|
|
return 0;
|
|
}
|
|
|
|
phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
|
|
phy->reset_delay_us = 100;
|
|
|
|
ctrl_ext = rd32(E1000_CTRL_EXT);
|
|
|
|
/* PHY function pointers */
|
|
if (igb_sgmii_active_82575(hw)) {
|
|
phy->ops.reset = igb_phy_hw_reset_sgmii_82575;
|
|
ctrl_ext |= E1000_CTRL_I2C_ENA;
|
|
} else {
|
|
phy->ops.reset = igb_phy_hw_reset;
|
|
ctrl_ext &= ~E1000_CTRL_I2C_ENA;
|
|
}
|
|
|
|
wr32(E1000_CTRL_EXT, ctrl_ext);
|
|
igb_reset_mdicnfg_82580(hw);
|
|
|
|
if (igb_sgmii_active_82575(hw) && !igb_sgmii_uses_mdio_82575(hw)) {
|
|
phy->ops.read_reg = igb_read_phy_reg_sgmii_82575;
|
|
phy->ops.write_reg = igb_write_phy_reg_sgmii_82575;
|
|
} else if (hw->mac.type >= e1000_82580) {
|
|
phy->ops.read_reg = igb_read_phy_reg_82580;
|
|
phy->ops.write_reg = igb_write_phy_reg_82580;
|
|
} else {
|
|
phy->ops.read_reg = igb_read_phy_reg_igp;
|
|
phy->ops.write_reg = igb_write_phy_reg_igp;
|
|
}
|
|
|
|
/* set lan id */
|
|
hw->bus.func = (rd32(E1000_STATUS) & E1000_STATUS_FUNC_MASK) >>
|
|
E1000_STATUS_FUNC_SHIFT;
|
|
|
|
/* Set phy->phy_addr and phy->id. */
|
|
ret_val = igb_get_phy_id_82575(hw);
|
|
if (ret_val)
|
|
return ret_val;
|
|
|
|
/* Verify phy id and set remaining function pointers */
|
|
switch (phy->id) {
|
|
case I347AT4_E_PHY_ID:
|
|
case M88E1112_E_PHY_ID:
|
|
case M88E1111_I_PHY_ID:
|
|
phy->type = e1000_phy_m88;
|
|
phy->ops.get_phy_info = igb_get_phy_info_m88;
|
|
|
|
if (phy->id == I347AT4_E_PHY_ID ||
|
|
phy->id == M88E1112_E_PHY_ID)
|
|
phy->ops.get_cable_length = igb_get_cable_length_m88_gen2;
|
|
else
|
|
phy->ops.get_cable_length = igb_get_cable_length_m88;
|
|
|
|
phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88;
|
|
break;
|
|
case IGP03E1000_E_PHY_ID:
|
|
phy->type = e1000_phy_igp_3;
|
|
phy->ops.get_phy_info = igb_get_phy_info_igp;
|
|
phy->ops.get_cable_length = igb_get_cable_length_igp_2;
|
|
phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_igp;
|
|
phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82575;
|
|
phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state;
|
|
break;
|
|
case I82580_I_PHY_ID:
|
|
case I350_I_PHY_ID:
|
|
phy->type = e1000_phy_82580;
|
|
phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_82580;
|
|
phy->ops.get_cable_length = igb_get_cable_length_82580;
|
|
phy->ops.get_phy_info = igb_get_phy_info_82580;
|
|
break;
|
|
default:
|
|
return -E1000_ERR_PHY;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* igb_acquire_phy_82575 - Acquire rights to access PHY
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Acquire access rights to the correct PHY. This is a
|
|
* function pointer entry point called by the api module.
|
|
**/
|
|
static s32 igb_acquire_phy_82575(struct e1000_hw *hw)
|
|
{
|
|
u16 mask = E1000_SWFW_PHY0_SM;
|
|
|
|
if (hw->bus.func == E1000_FUNC_1)
|
|
mask = E1000_SWFW_PHY1_SM;
|
|
else if (hw->bus.func == E1000_FUNC_2)
|
|
mask = E1000_SWFW_PHY2_SM;
|
|
else if (hw->bus.func == E1000_FUNC_3)
|
|
mask = E1000_SWFW_PHY3_SM;
|
|
|
|
return igb_acquire_swfw_sync_82575(hw, mask);
|
|
}
|
|
|
|
/**
|
|
* igb_release_phy_82575 - Release rights to access PHY
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* A wrapper to release access rights to the correct PHY. This is a
|
|
* function pointer entry point called by the api module.
|
|
**/
|
|
static void igb_release_phy_82575(struct e1000_hw *hw)
|
|
{
|
|
u16 mask = E1000_SWFW_PHY0_SM;
|
|
|
|
if (hw->bus.func == E1000_FUNC_1)
|
|
mask = E1000_SWFW_PHY1_SM;
|
|
else if (hw->bus.func == E1000_FUNC_2)
|
|
mask = E1000_SWFW_PHY2_SM;
|
|
else if (hw->bus.func == E1000_FUNC_3)
|
|
mask = E1000_SWFW_PHY3_SM;
|
|
|
|
igb_release_swfw_sync_82575(hw, mask);
|
|
}
|
|
|
|
/**
|
|
* igb_read_phy_reg_sgmii_82575 - Read PHY register using sgmii
|
|
* @hw: pointer to the HW structure
|
|
* @offset: register offset to be read
|
|
* @data: pointer to the read data
|
|
*
|
|
* Reads the PHY register at offset using the serial gigabit media independent
|
|
* interface and stores the retrieved information in data.
|
|
**/
|
|
static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset,
|
|
u16 *data)
|
|
{
|
|
s32 ret_val = -E1000_ERR_PARAM;
|
|
|
|
if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) {
|
|
hw_dbg("PHY Address %u is out of range\n", offset);
|
|
goto out;
|
|
}
|
|
|
|
ret_val = hw->phy.ops.acquire(hw);
|
|
if (ret_val)
|
|
goto out;
|
|
|
|
ret_val = igb_read_phy_reg_i2c(hw, offset, data);
|
|
|
|
hw->phy.ops.release(hw);
|
|
|
|
out:
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igb_write_phy_reg_sgmii_82575 - Write PHY register using sgmii
|
|
* @hw: pointer to the HW structure
|
|
* @offset: register offset to write to
|
|
* @data: data to write at register offset
|
|
*
|
|
* Writes the data to PHY register at the offset using the serial gigabit
|
|
* media independent interface.
|
|
**/
|
|
static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset,
|
|
u16 data)
|
|
{
|
|
s32 ret_val = -E1000_ERR_PARAM;
|
|
|
|
|
|
if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) {
|
|
hw_dbg("PHY Address %d is out of range\n", offset);
|
|
goto out;
|
|
}
|
|
|
|
ret_val = hw->phy.ops.acquire(hw);
|
|
if (ret_val)
|
|
goto out;
|
|
|
|
ret_val = igb_write_phy_reg_i2c(hw, offset, data);
|
|
|
|
hw->phy.ops.release(hw);
|
|
|
|
out:
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igb_get_phy_id_82575 - Retrieve PHY addr and id
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Retrieves the PHY address and ID for both PHY's which do and do not use
|
|
* sgmi interface.
|
|
**/
|
|
static s32 igb_get_phy_id_82575(struct e1000_hw *hw)
|
|
{
|
|
struct e1000_phy_info *phy = &hw->phy;
|
|
s32 ret_val = 0;
|
|
u16 phy_id;
|
|
u32 ctrl_ext;
|
|
u32 mdic;
|
|
|
|
/*
|
|
* For SGMII PHYs, we try the list of possible addresses until
|
|
* we find one that works. For non-SGMII PHYs
|
|
* (e.g. integrated copper PHYs), an address of 1 should
|
|
* work. The result of this function should mean phy->phy_addr
|
|
* and phy->id are set correctly.
|
|
*/
|
|
if (!(igb_sgmii_active_82575(hw))) {
|
|
phy->addr = 1;
|
|
ret_val = igb_get_phy_id(hw);
|
|
goto out;
|
|
}
|
|
|
|
if (igb_sgmii_uses_mdio_82575(hw)) {
|
|
switch (hw->mac.type) {
|
|
case e1000_82575:
|
|
case e1000_82576:
|
|
mdic = rd32(E1000_MDIC);
|
|
mdic &= E1000_MDIC_PHY_MASK;
|
|
phy->addr = mdic >> E1000_MDIC_PHY_SHIFT;
|
|
break;
|
|
case e1000_82580:
|
|
case e1000_i350:
|
|
mdic = rd32(E1000_MDICNFG);
|
|
mdic &= E1000_MDICNFG_PHY_MASK;
|
|
phy->addr = mdic >> E1000_MDICNFG_PHY_SHIFT;
|
|
break;
|
|
default:
|
|
ret_val = -E1000_ERR_PHY;
|
|
goto out;
|
|
break;
|
|
}
|
|
ret_val = igb_get_phy_id(hw);
|
|
goto out;
|
|
}
|
|
|
|
/* Power on sgmii phy if it is disabled */
|
|
ctrl_ext = rd32(E1000_CTRL_EXT);
|
|
wr32(E1000_CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_SDP3_DATA);
|
|
wrfl();
|
|
msleep(300);
|
|
|
|
/*
|
|
* The address field in the I2CCMD register is 3 bits and 0 is invalid.
|
|
* Therefore, we need to test 1-7
|
|
*/
|
|
for (phy->addr = 1; phy->addr < 8; phy->addr++) {
|
|
ret_val = igb_read_phy_reg_sgmii_82575(hw, PHY_ID1, &phy_id);
|
|
if (ret_val == 0) {
|
|
hw_dbg("Vendor ID 0x%08X read at address %u\n",
|
|
phy_id, phy->addr);
|
|
/*
|
|
* At the time of this writing, The M88 part is
|
|
* the only supported SGMII PHY product.
|
|
*/
|
|
if (phy_id == M88_VENDOR)
|
|
break;
|
|
} else {
|
|
hw_dbg("PHY address %u was unreadable\n", phy->addr);
|
|
}
|
|
}
|
|
|
|
/* A valid PHY type couldn't be found. */
|
|
if (phy->addr == 8) {
|
|
phy->addr = 0;
|
|
ret_val = -E1000_ERR_PHY;
|
|
goto out;
|
|
} else {
|
|
ret_val = igb_get_phy_id(hw);
|
|
}
|
|
|
|
/* restore previous sfp cage power state */
|
|
wr32(E1000_CTRL_EXT, ctrl_ext);
|
|
|
|
out:
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igb_phy_hw_reset_sgmii_82575 - Performs a PHY reset
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Resets the PHY using the serial gigabit media independent interface.
|
|
**/
|
|
static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *hw)
|
|
{
|
|
s32 ret_val;
|
|
|
|
/*
|
|
* This isn't a true "hard" reset, but is the only reset
|
|
* available to us at this time.
|
|
*/
|
|
|
|
hw_dbg("Soft resetting SGMII attached PHY...\n");
|
|
|
|
/*
|
|
* SFP documentation requires the following to configure the SPF module
|
|
* to work on SGMII. No further documentation is given.
|
|
*/
|
|
ret_val = hw->phy.ops.write_reg(hw, 0x1B, 0x8084);
|
|
if (ret_val)
|
|
goto out;
|
|
|
|
ret_val = igb_phy_sw_reset(hw);
|
|
|
|
out:
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igb_set_d0_lplu_state_82575 - Set Low Power Linkup D0 state
|
|
* @hw: pointer to the HW structure
|
|
* @active: true to enable LPLU, false to disable
|
|
*
|
|
* Sets the LPLU D0 state according to the active flag. When
|
|
* activating LPLU this function also disables smart speed
|
|
* and vice versa. LPLU will not be activated unless the
|
|
* device autonegotiation advertisement meets standards of
|
|
* either 10 or 10/100 or 10/100/1000 at all duplexes.
|
|
* This is a function pointer entry point only called by
|
|
* PHY setup routines.
|
|
**/
|
|
static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *hw, bool active)
|
|
{
|
|
struct e1000_phy_info *phy = &hw->phy;
|
|
s32 ret_val;
|
|
u16 data;
|
|
|
|
ret_val = phy->ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data);
|
|
if (ret_val)
|
|
goto out;
|
|
|
|
if (active) {
|
|
data |= IGP02E1000_PM_D0_LPLU;
|
|
ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
|
|
data);
|
|
if (ret_val)
|
|
goto out;
|
|
|
|
/* When LPLU is enabled, we should disable SmartSpeed */
|
|
ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
|
|
&data);
|
|
data &= ~IGP01E1000_PSCFR_SMART_SPEED;
|
|
ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
|
|
data);
|
|
if (ret_val)
|
|
goto out;
|
|
} else {
|
|
data &= ~IGP02E1000_PM_D0_LPLU;
|
|
ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
|
|
data);
|
|
/*
|
|
* LPLU and SmartSpeed are mutually exclusive. LPLU is used
|
|
* during Dx states where the power conservation is most
|
|
* important. During driver activity we should enable
|
|
* SmartSpeed, so performance is maintained.
|
|
*/
|
|
if (phy->smart_speed == e1000_smart_speed_on) {
|
|
ret_val = phy->ops.read_reg(hw,
|
|
IGP01E1000_PHY_PORT_CONFIG, &data);
|
|
if (ret_val)
|
|
goto out;
|
|
|
|
data |= IGP01E1000_PSCFR_SMART_SPEED;
|
|
ret_val = phy->ops.write_reg(hw,
|
|
IGP01E1000_PHY_PORT_CONFIG, data);
|
|
if (ret_val)
|
|
goto out;
|
|
} else if (phy->smart_speed == e1000_smart_speed_off) {
|
|
ret_val = phy->ops.read_reg(hw,
|
|
IGP01E1000_PHY_PORT_CONFIG, &data);
|
|
if (ret_val)
|
|
goto out;
|
|
|
|
data &= ~IGP01E1000_PSCFR_SMART_SPEED;
|
|
ret_val = phy->ops.write_reg(hw,
|
|
IGP01E1000_PHY_PORT_CONFIG, data);
|
|
if (ret_val)
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
out:
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igb_acquire_nvm_82575 - Request for access to EEPROM
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Acquire the necessary semaphores for exclusive access to the EEPROM.
|
|
* Set the EEPROM access request bit and wait for EEPROM access grant bit.
|
|
* Return successful if access grant bit set, else clear the request for
|
|
* EEPROM access and return -E1000_ERR_NVM (-1).
|
|
**/
|
|
static s32 igb_acquire_nvm_82575(struct e1000_hw *hw)
|
|
{
|
|
s32 ret_val;
|
|
|
|
ret_val = igb_acquire_swfw_sync_82575(hw, E1000_SWFW_EEP_SM);
|
|
if (ret_val)
|
|
goto out;
|
|
|
|
ret_val = igb_acquire_nvm(hw);
|
|
|
|
if (ret_val)
|
|
igb_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM);
|
|
|
|
out:
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igb_release_nvm_82575 - Release exclusive access to EEPROM
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Stop any current commands to the EEPROM and clear the EEPROM request bit,
|
|
* then release the semaphores acquired.
|
|
**/
|
|
static void igb_release_nvm_82575(struct e1000_hw *hw)
|
|
{
|
|
igb_release_nvm(hw);
|
|
igb_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM);
|
|
}
|
|
|
|
/**
|
|
* igb_acquire_swfw_sync_82575 - Acquire SW/FW semaphore
|
|
* @hw: pointer to the HW structure
|
|
* @mask: specifies which semaphore to acquire
|
|
*
|
|
* Acquire the SW/FW semaphore to access the PHY or NVM. The mask
|
|
* will also specify which port we're acquiring the lock for.
|
|
**/
|
|
static s32 igb_acquire_swfw_sync_82575(struct e1000_hw *hw, u16 mask)
|
|
{
|
|
u32 swfw_sync;
|
|
u32 swmask = mask;
|
|
u32 fwmask = mask << 16;
|
|
s32 ret_val = 0;
|
|
s32 i = 0, timeout = 200; /* FIXME: find real value to use here */
|
|
|
|
while (i < timeout) {
|
|
if (igb_get_hw_semaphore(hw)) {
|
|
ret_val = -E1000_ERR_SWFW_SYNC;
|
|
goto out;
|
|
}
|
|
|
|
swfw_sync = rd32(E1000_SW_FW_SYNC);
|
|
if (!(swfw_sync & (fwmask | swmask)))
|
|
break;
|
|
|
|
/*
|
|
* Firmware currently using resource (fwmask)
|
|
* or other software thread using resource (swmask)
|
|
*/
|
|
igb_put_hw_semaphore(hw);
|
|
mdelay(5);
|
|
i++;
|
|
}
|
|
|
|
if (i == timeout) {
|
|
hw_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n");
|
|
ret_val = -E1000_ERR_SWFW_SYNC;
|
|
goto out;
|
|
}
|
|
|
|
swfw_sync |= swmask;
|
|
wr32(E1000_SW_FW_SYNC, swfw_sync);
|
|
|
|
igb_put_hw_semaphore(hw);
|
|
|
|
out:
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igb_release_swfw_sync_82575 - Release SW/FW semaphore
|
|
* @hw: pointer to the HW structure
|
|
* @mask: specifies which semaphore to acquire
|
|
*
|
|
* Release the SW/FW semaphore used to access the PHY or NVM. The mask
|
|
* will also specify which port we're releasing the lock for.
|
|
**/
|
|
static void igb_release_swfw_sync_82575(struct e1000_hw *hw, u16 mask)
|
|
{
|
|
u32 swfw_sync;
|
|
|
|
while (igb_get_hw_semaphore(hw) != 0);
|
|
/* Empty */
|
|
|
|
swfw_sync = rd32(E1000_SW_FW_SYNC);
|
|
swfw_sync &= ~mask;
|
|
wr32(E1000_SW_FW_SYNC, swfw_sync);
|
|
|
|
igb_put_hw_semaphore(hw);
|
|
}
|
|
|
|
/**
|
|
* igb_get_cfg_done_82575 - Read config done bit
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Read the management control register for the config done bit for
|
|
* completion status. NOTE: silicon which is EEPROM-less will fail trying
|
|
* to read the config done bit, so an error is *ONLY* logged and returns
|
|
* 0. If we were to return with error, EEPROM-less silicon
|
|
* would not be able to be reset or change link.
|
|
**/
|
|
static s32 igb_get_cfg_done_82575(struct e1000_hw *hw)
|
|
{
|
|
s32 timeout = PHY_CFG_TIMEOUT;
|
|
s32 ret_val = 0;
|
|
u32 mask = E1000_NVM_CFG_DONE_PORT_0;
|
|
|
|
if (hw->bus.func == 1)
|
|
mask = E1000_NVM_CFG_DONE_PORT_1;
|
|
else if (hw->bus.func == E1000_FUNC_2)
|
|
mask = E1000_NVM_CFG_DONE_PORT_2;
|
|
else if (hw->bus.func == E1000_FUNC_3)
|
|
mask = E1000_NVM_CFG_DONE_PORT_3;
|
|
|
|
while (timeout) {
|
|
if (rd32(E1000_EEMNGCTL) & mask)
|
|
break;
|
|
msleep(1);
|
|
timeout--;
|
|
}
|
|
if (!timeout)
|
|
hw_dbg("MNG configuration cycle has not completed.\n");
|
|
|
|
/* If EEPROM is not marked present, init the PHY manually */
|
|
if (((rd32(E1000_EECD) & E1000_EECD_PRES) == 0) &&
|
|
(hw->phy.type == e1000_phy_igp_3))
|
|
igb_phy_init_script_igp3(hw);
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igb_check_for_link_82575 - Check for link
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* If sgmii is enabled, then use the pcs register to determine link, otherwise
|
|
* use the generic interface for determining link.
|
|
**/
|
|
static s32 igb_check_for_link_82575(struct e1000_hw *hw)
|
|
{
|
|
s32 ret_val;
|
|
u16 speed, duplex;
|
|
|
|
if (hw->phy.media_type != e1000_media_type_copper) {
|
|
ret_val = igb_get_pcs_speed_and_duplex_82575(hw, &speed,
|
|
&duplex);
|
|
/*
|
|
* Use this flag to determine if link needs to be checked or
|
|
* not. If we have link clear the flag so that we do not
|
|
* continue to check for link.
|
|
*/
|
|
hw->mac.get_link_status = !hw->mac.serdes_has_link;
|
|
} else {
|
|
ret_val = igb_check_for_copper_link(hw);
|
|
}
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igb_power_up_serdes_link_82575 - Power up the serdes link after shutdown
|
|
* @hw: pointer to the HW structure
|
|
**/
|
|
void igb_power_up_serdes_link_82575(struct e1000_hw *hw)
|
|
{
|
|
u32 reg;
|
|
|
|
|
|
if ((hw->phy.media_type != e1000_media_type_internal_serdes) &&
|
|
!igb_sgmii_active_82575(hw))
|
|
return;
|
|
|
|
/* Enable PCS to turn on link */
|
|
reg = rd32(E1000_PCS_CFG0);
|
|
reg |= E1000_PCS_CFG_PCS_EN;
|
|
wr32(E1000_PCS_CFG0, reg);
|
|
|
|
/* Power up the laser */
|
|
reg = rd32(E1000_CTRL_EXT);
|
|
reg &= ~E1000_CTRL_EXT_SDP3_DATA;
|
|
wr32(E1000_CTRL_EXT, reg);
|
|
|
|
/* flush the write to verify completion */
|
|
wrfl();
|
|
msleep(1);
|
|
}
|
|
|
|
/**
|
|
* igb_get_pcs_speed_and_duplex_82575 - Retrieve current speed/duplex
|
|
* @hw: pointer to the HW structure
|
|
* @speed: stores the current speed
|
|
* @duplex: stores the current duplex
|
|
*
|
|
* Using the physical coding sub-layer (PCS), retrieve the current speed and
|
|
* duplex, then store the values in the pointers provided.
|
|
**/
|
|
static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, u16 *speed,
|
|
u16 *duplex)
|
|
{
|
|
struct e1000_mac_info *mac = &hw->mac;
|
|
u32 pcs;
|
|
|
|
/* Set up defaults for the return values of this function */
|
|
mac->serdes_has_link = false;
|
|
*speed = 0;
|
|
*duplex = 0;
|
|
|
|
/*
|
|
* Read the PCS Status register for link state. For non-copper mode,
|
|
* the status register is not accurate. The PCS status register is
|
|
* used instead.
|
|
*/
|
|
pcs = rd32(E1000_PCS_LSTAT);
|
|
|
|
/*
|
|
* The link up bit determines when link is up on autoneg. The sync ok
|
|
* gets set once both sides sync up and agree upon link. Stable link
|
|
* can be determined by checking for both link up and link sync ok
|
|
*/
|
|
if ((pcs & E1000_PCS_LSTS_LINK_OK) && (pcs & E1000_PCS_LSTS_SYNK_OK)) {
|
|
mac->serdes_has_link = true;
|
|
|
|
/* Detect and store PCS speed */
|
|
if (pcs & E1000_PCS_LSTS_SPEED_1000) {
|
|
*speed = SPEED_1000;
|
|
} else if (pcs & E1000_PCS_LSTS_SPEED_100) {
|
|
*speed = SPEED_100;
|
|
} else {
|
|
*speed = SPEED_10;
|
|
}
|
|
|
|
/* Detect and store PCS duplex */
|
|
if (pcs & E1000_PCS_LSTS_DUPLEX_FULL) {
|
|
*duplex = FULL_DUPLEX;
|
|
} else {
|
|
*duplex = HALF_DUPLEX;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* igb_shutdown_serdes_link_82575 - Remove link during power down
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* In the case of fiber serdes, shut down optics and PCS on driver unload
|
|
* when management pass thru is not enabled.
|
|
**/
|
|
void igb_shutdown_serdes_link_82575(struct e1000_hw *hw)
|
|
{
|
|
u32 reg;
|
|
|
|
if (hw->phy.media_type != e1000_media_type_internal_serdes &&
|
|
igb_sgmii_active_82575(hw))
|
|
return;
|
|
|
|
if (!igb_enable_mng_pass_thru(hw)) {
|
|
/* Disable PCS to turn off link */
|
|
reg = rd32(E1000_PCS_CFG0);
|
|
reg &= ~E1000_PCS_CFG_PCS_EN;
|
|
wr32(E1000_PCS_CFG0, reg);
|
|
|
|
/* shutdown the laser */
|
|
reg = rd32(E1000_CTRL_EXT);
|
|
reg |= E1000_CTRL_EXT_SDP3_DATA;
|
|
wr32(E1000_CTRL_EXT, reg);
|
|
|
|
/* flush the write to verify completion */
|
|
wrfl();
|
|
msleep(1);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* igb_reset_hw_82575 - Reset hardware
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* This resets the hardware into a known state. This is a
|
|
* function pointer entry point called by the api module.
|
|
**/
|
|
static s32 igb_reset_hw_82575(struct e1000_hw *hw)
|
|
{
|
|
u32 ctrl, icr;
|
|
s32 ret_val;
|
|
|
|
/*
|
|
* Prevent the PCI-E bus from sticking if there is no TLP connection
|
|
* on the last TLP read/write transaction when MAC is reset.
|
|
*/
|
|
ret_val = igb_disable_pcie_master(hw);
|
|
if (ret_val)
|
|
hw_dbg("PCI-E Master disable polling has failed.\n");
|
|
|
|
/* set the completion timeout for interface */
|
|
ret_val = igb_set_pcie_completion_timeout(hw);
|
|
if (ret_val) {
|
|
hw_dbg("PCI-E Set completion timeout has failed.\n");
|
|
}
|
|
|
|
hw_dbg("Masking off all interrupts\n");
|
|
wr32(E1000_IMC, 0xffffffff);
|
|
|
|
wr32(E1000_RCTL, 0);
|
|
wr32(E1000_TCTL, E1000_TCTL_PSP);
|
|
wrfl();
|
|
|
|
msleep(10);
|
|
|
|
ctrl = rd32(E1000_CTRL);
|
|
|
|
hw_dbg("Issuing a global reset to MAC\n");
|
|
wr32(E1000_CTRL, ctrl | E1000_CTRL_RST);
|
|
|
|
ret_val = igb_get_auto_rd_done(hw);
|
|
if (ret_val) {
|
|
/*
|
|
* When auto config read does not complete, do not
|
|
* return with an error. This can happen in situations
|
|
* where there is no eeprom and prevents getting link.
|
|
*/
|
|
hw_dbg("Auto Read Done did not complete\n");
|
|
}
|
|
|
|
/* If EEPROM is not present, run manual init scripts */
|
|
if ((rd32(E1000_EECD) & E1000_EECD_PRES) == 0)
|
|
igb_reset_init_script_82575(hw);
|
|
|
|
/* Clear any pending interrupt events. */
|
|
wr32(E1000_IMC, 0xffffffff);
|
|
icr = rd32(E1000_ICR);
|
|
|
|
/* Install any alternate MAC address into RAR0 */
|
|
ret_val = igb_check_alt_mac_addr(hw);
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igb_init_hw_82575 - Initialize hardware
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* This inits the hardware readying it for operation.
|
|
**/
|
|
static s32 igb_init_hw_82575(struct e1000_hw *hw)
|
|
{
|
|
struct e1000_mac_info *mac = &hw->mac;
|
|
s32 ret_val;
|
|
u16 i, rar_count = mac->rar_entry_count;
|
|
|
|
/* Initialize identification LED */
|
|
ret_val = igb_id_led_init(hw);
|
|
if (ret_val) {
|
|
hw_dbg("Error initializing identification LED\n");
|
|
/* This is not fatal and we should not stop init due to this */
|
|
}
|
|
|
|
/* Disabling VLAN filtering */
|
|
hw_dbg("Initializing the IEEE VLAN\n");
|
|
igb_clear_vfta(hw);
|
|
|
|
/* Setup the receive address */
|
|
igb_init_rx_addrs(hw, rar_count);
|
|
|
|
/* Zero out the Multicast HASH table */
|
|
hw_dbg("Zeroing the MTA\n");
|
|
for (i = 0; i < mac->mta_reg_count; i++)
|
|
array_wr32(E1000_MTA, i, 0);
|
|
|
|
/* Zero out the Unicast HASH table */
|
|
hw_dbg("Zeroing the UTA\n");
|
|
for (i = 0; i < mac->uta_reg_count; i++)
|
|
array_wr32(E1000_UTA, i, 0);
|
|
|
|
/* Setup link and flow control */
|
|
ret_val = igb_setup_link(hw);
|
|
|
|
/*
|
|
* Clear all of the statistics registers (clear on read). It is
|
|
* important that we do this after we have tried to establish link
|
|
* because the symbol error count will increment wildly if there
|
|
* is no link.
|
|
*/
|
|
igb_clear_hw_cntrs_82575(hw);
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igb_setup_copper_link_82575 - Configure copper link settings
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Configures the link for auto-neg or forced speed and duplex. Then we check
|
|
* for link, once link is established calls to configure collision distance
|
|
* and flow control are called.
|
|
**/
|
|
static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
|
|
{
|
|
u32 ctrl;
|
|
s32 ret_val;
|
|
|
|
ctrl = rd32(E1000_CTRL);
|
|
ctrl |= E1000_CTRL_SLU;
|
|
ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
|
|
wr32(E1000_CTRL, ctrl);
|
|
|
|
ret_val = igb_setup_serdes_link_82575(hw);
|
|
if (ret_val)
|
|
goto out;
|
|
|
|
if (igb_sgmii_active_82575(hw) && !hw->phy.reset_disable) {
|
|
/* allow time for SFP cage time to power up phy */
|
|
msleep(300);
|
|
|
|
ret_val = hw->phy.ops.reset(hw);
|
|
if (ret_val) {
|
|
hw_dbg("Error resetting the PHY.\n");
|
|
goto out;
|
|
}
|
|
}
|
|
switch (hw->phy.type) {
|
|
case e1000_phy_m88:
|
|
if (hw->phy.id == I347AT4_E_PHY_ID ||
|
|
hw->phy.id == M88E1112_E_PHY_ID)
|
|
ret_val = igb_copper_link_setup_m88_gen2(hw);
|
|
else
|
|
ret_val = igb_copper_link_setup_m88(hw);
|
|
break;
|
|
case e1000_phy_igp_3:
|
|
ret_val = igb_copper_link_setup_igp(hw);
|
|
break;
|
|
case e1000_phy_82580:
|
|
ret_val = igb_copper_link_setup_82580(hw);
|
|
break;
|
|
default:
|
|
ret_val = -E1000_ERR_PHY;
|
|
break;
|
|
}
|
|
|
|
if (ret_val)
|
|
goto out;
|
|
|
|
ret_val = igb_setup_copper_link(hw);
|
|
out:
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igb_setup_serdes_link_82575 - Setup link for serdes
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Configure the physical coding sub-layer (PCS) link. The PCS link is
|
|
* used on copper connections where the serialized gigabit media independent
|
|
* interface (sgmii), or serdes fiber is being used. Configures the link
|
|
* for auto-negotiation or forces speed/duplex.
|
|
**/
|
|
static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw)
|
|
{
|
|
u32 ctrl_ext, ctrl_reg, reg;
|
|
bool pcs_autoneg;
|
|
|
|
if ((hw->phy.media_type != e1000_media_type_internal_serdes) &&
|
|
!igb_sgmii_active_82575(hw))
|
|
return 0;
|
|
|
|
/*
|
|
* On the 82575, SerDes loopback mode persists until it is
|
|
* explicitly turned off or a power cycle is performed. A read to
|
|
* the register does not indicate its status. Therefore, we ensure
|
|
* loopback mode is disabled during initialization.
|
|
*/
|
|
wr32(E1000_SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK);
|
|
|
|
/* power on the sfp cage if present */
|
|
ctrl_ext = rd32(E1000_CTRL_EXT);
|
|
ctrl_ext &= ~E1000_CTRL_EXT_SDP3_DATA;
|
|
wr32(E1000_CTRL_EXT, ctrl_ext);
|
|
|
|
ctrl_reg = rd32(E1000_CTRL);
|
|
ctrl_reg |= E1000_CTRL_SLU;
|
|
|
|
if (hw->mac.type == e1000_82575 || hw->mac.type == e1000_82576) {
|
|
/* set both sw defined pins */
|
|
ctrl_reg |= E1000_CTRL_SWDPIN0 | E1000_CTRL_SWDPIN1;
|
|
|
|
/* Set switch control to serdes energy detect */
|
|
reg = rd32(E1000_CONNSW);
|
|
reg |= E1000_CONNSW_ENRGSRC;
|
|
wr32(E1000_CONNSW, reg);
|
|
}
|
|
|
|
reg = rd32(E1000_PCS_LCTL);
|
|
|
|
/* default pcs_autoneg to the same setting as mac autoneg */
|
|
pcs_autoneg = hw->mac.autoneg;
|
|
|
|
switch (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) {
|
|
case E1000_CTRL_EXT_LINK_MODE_SGMII:
|
|
/* sgmii mode lets the phy handle forcing speed/duplex */
|
|
pcs_autoneg = true;
|
|
/* autoneg time out should be disabled for SGMII mode */
|
|
reg &= ~(E1000_PCS_LCTL_AN_TIMEOUT);
|
|
break;
|
|
case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
|
|
/* disable PCS autoneg and support parallel detect only */
|
|
pcs_autoneg = false;
|
|
default:
|
|
/*
|
|
* non-SGMII modes only supports a speed of 1000/Full for the
|
|
* link so it is best to just force the MAC and let the pcs
|
|
* link either autoneg or be forced to 1000/Full
|
|
*/
|
|
ctrl_reg |= E1000_CTRL_SPD_1000 | E1000_CTRL_FRCSPD |
|
|
E1000_CTRL_FD | E1000_CTRL_FRCDPX;
|
|
|
|
/* set speed of 1000/Full if speed/duplex is forced */
|
|
reg |= E1000_PCS_LCTL_FSV_1000 | E1000_PCS_LCTL_FDV_FULL;
|
|
break;
|
|
}
|
|
|
|
wr32(E1000_CTRL, ctrl_reg);
|
|
|
|
/*
|
|
* New SerDes mode allows for forcing speed or autonegotiating speed
|
|
* at 1gb. Autoneg should be default set by most drivers. This is the
|
|
* mode that will be compatible with older link partners and switches.
|
|
* However, both are supported by the hardware and some drivers/tools.
|
|
*/
|
|
reg &= ~(E1000_PCS_LCTL_AN_ENABLE | E1000_PCS_LCTL_FLV_LINK_UP |
|
|
E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK);
|
|
|
|
/*
|
|
* We force flow control to prevent the CTRL register values from being
|
|
* overwritten by the autonegotiated flow control values
|
|
*/
|
|
reg |= E1000_PCS_LCTL_FORCE_FCTRL;
|
|
|
|
if (pcs_autoneg) {
|
|
/* Set PCS register for autoneg */
|
|
reg |= E1000_PCS_LCTL_AN_ENABLE | /* Enable Autoneg */
|
|
E1000_PCS_LCTL_AN_RESTART; /* Restart autoneg */
|
|
hw_dbg("Configuring Autoneg:PCS_LCTL=0x%08X\n", reg);
|
|
} else {
|
|
/* Set PCS register for forced link */
|
|
reg |= E1000_PCS_LCTL_FSD; /* Force Speed */
|
|
|
|
hw_dbg("Configuring Forced Link:PCS_LCTL=0x%08X\n", reg);
|
|
}
|
|
|
|
wr32(E1000_PCS_LCTL, reg);
|
|
|
|
if (!igb_sgmii_active_82575(hw))
|
|
igb_force_mac_fc(hw);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* igb_sgmii_active_82575 - Return sgmii state
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* 82575 silicon has a serialized gigabit media independent interface (sgmii)
|
|
* which can be enabled for use in the embedded applications. Simply
|
|
* return the current state of the sgmii interface.
|
|
**/
|
|
static bool igb_sgmii_active_82575(struct e1000_hw *hw)
|
|
{
|
|
struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575;
|
|
return dev_spec->sgmii_active;
|
|
}
|
|
|
|
/**
|
|
* igb_reset_init_script_82575 - Inits HW defaults after reset
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Inits recommended HW defaults after a reset when there is no EEPROM
|
|
* detected. This is only for the 82575.
|
|
**/
|
|
static s32 igb_reset_init_script_82575(struct e1000_hw *hw)
|
|
{
|
|
if (hw->mac.type == e1000_82575) {
|
|
hw_dbg("Running reset init script for 82575\n");
|
|
/* SerDes configuration via SERDESCTRL */
|
|
igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x00, 0x0C);
|
|
igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x01, 0x78);
|
|
igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x1B, 0x23);
|
|
igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x23, 0x15);
|
|
|
|
/* CCM configuration via CCMCTL register */
|
|
igb_write_8bit_ctrl_reg(hw, E1000_CCMCTL, 0x14, 0x00);
|
|
igb_write_8bit_ctrl_reg(hw, E1000_CCMCTL, 0x10, 0x00);
|
|
|
|
/* PCIe lanes configuration */
|
|
igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x00, 0xEC);
|
|
igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x61, 0xDF);
|
|
igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x34, 0x05);
|
|
igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x2F, 0x81);
|
|
|
|
/* PCIe PLL Configuration */
|
|
igb_write_8bit_ctrl_reg(hw, E1000_SCCTL, 0x02, 0x47);
|
|
igb_write_8bit_ctrl_reg(hw, E1000_SCCTL, 0x14, 0x00);
|
|
igb_write_8bit_ctrl_reg(hw, E1000_SCCTL, 0x10, 0x00);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* igb_read_mac_addr_82575 - Read device MAC address
|
|
* @hw: pointer to the HW structure
|
|
**/
|
|
static s32 igb_read_mac_addr_82575(struct e1000_hw *hw)
|
|
{
|
|
s32 ret_val = 0;
|
|
|
|
/*
|
|
* If there's an alternate MAC address place it in RAR0
|
|
* so that it will override the Si installed default perm
|
|
* address.
|
|
*/
|
|
ret_val = igb_check_alt_mac_addr(hw);
|
|
if (ret_val)
|
|
goto out;
|
|
|
|
ret_val = igb_read_mac_addr(hw);
|
|
|
|
out:
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igb_power_down_phy_copper_82575 - Remove link during PHY power down
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* In the case of a PHY power down to save power, or to turn off link during a
|
|
* driver unload, or wake on lan is not enabled, remove the link.
|
|
**/
|
|
void igb_power_down_phy_copper_82575(struct e1000_hw *hw)
|
|
{
|
|
/* If the management interface is not enabled, then power down */
|
|
if (!(igb_enable_mng_pass_thru(hw) || igb_check_reset_block(hw)))
|
|
igb_power_down_phy_copper(hw);
|
|
}
|
|
|
|
/**
|
|
* igb_clear_hw_cntrs_82575 - Clear device specific hardware counters
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Clears the hardware counters by reading the counter registers.
|
|
**/
|
|
static void igb_clear_hw_cntrs_82575(struct e1000_hw *hw)
|
|
{
|
|
igb_clear_hw_cntrs_base(hw);
|
|
|
|
rd32(E1000_PRC64);
|
|
rd32(E1000_PRC127);
|
|
rd32(E1000_PRC255);
|
|
rd32(E1000_PRC511);
|
|
rd32(E1000_PRC1023);
|
|
rd32(E1000_PRC1522);
|
|
rd32(E1000_PTC64);
|
|
rd32(E1000_PTC127);
|
|
rd32(E1000_PTC255);
|
|
rd32(E1000_PTC511);
|
|
rd32(E1000_PTC1023);
|
|
rd32(E1000_PTC1522);
|
|
|
|
rd32(E1000_ALGNERRC);
|
|
rd32(E1000_RXERRC);
|
|
rd32(E1000_TNCRS);
|
|
rd32(E1000_CEXTERR);
|
|
rd32(E1000_TSCTC);
|
|
rd32(E1000_TSCTFC);
|
|
|
|
rd32(E1000_MGTPRC);
|
|
rd32(E1000_MGTPDC);
|
|
rd32(E1000_MGTPTC);
|
|
|
|
rd32(E1000_IAC);
|
|
rd32(E1000_ICRXOC);
|
|
|
|
rd32(E1000_ICRXPTC);
|
|
rd32(E1000_ICRXATC);
|
|
rd32(E1000_ICTXPTC);
|
|
rd32(E1000_ICTXATC);
|
|
rd32(E1000_ICTXQEC);
|
|
rd32(E1000_ICTXQMTC);
|
|
rd32(E1000_ICRXDMTC);
|
|
|
|
rd32(E1000_CBTMPC);
|
|
rd32(E1000_HTDPMC);
|
|
rd32(E1000_CBRMPC);
|
|
rd32(E1000_RPTHC);
|
|
rd32(E1000_HGPTC);
|
|
rd32(E1000_HTCBDPC);
|
|
rd32(E1000_HGORCL);
|
|
rd32(E1000_HGORCH);
|
|
rd32(E1000_HGOTCL);
|
|
rd32(E1000_HGOTCH);
|
|
rd32(E1000_LENERRS);
|
|
|
|
/* This register should not be read in copper configurations */
|
|
if (hw->phy.media_type == e1000_media_type_internal_serdes ||
|
|
igb_sgmii_active_82575(hw))
|
|
rd32(E1000_SCVPC);
|
|
}
|
|
|
|
/**
|
|
* igb_rx_fifo_flush_82575 - Clean rx fifo after RX enable
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* After rx enable if managability is enabled then there is likely some
|
|
* bad data at the start of the fifo and possibly in the DMA fifo. This
|
|
* function clears the fifos and flushes any packets that came in as rx was
|
|
* being enabled.
|
|
**/
|
|
void igb_rx_fifo_flush_82575(struct e1000_hw *hw)
|
|
{
|
|
u32 rctl, rlpml, rxdctl[4], rfctl, temp_rctl, rx_enabled;
|
|
int i, ms_wait;
|
|
|
|
if (hw->mac.type != e1000_82575 ||
|
|
!(rd32(E1000_MANC) & E1000_MANC_RCV_TCO_EN))
|
|
return;
|
|
|
|
/* Disable all RX queues */
|
|
for (i = 0; i < 4; i++) {
|
|
rxdctl[i] = rd32(E1000_RXDCTL(i));
|
|
wr32(E1000_RXDCTL(i),
|
|
rxdctl[i] & ~E1000_RXDCTL_QUEUE_ENABLE);
|
|
}
|
|
/* Poll all queues to verify they have shut down */
|
|
for (ms_wait = 0; ms_wait < 10; ms_wait++) {
|
|
msleep(1);
|
|
rx_enabled = 0;
|
|
for (i = 0; i < 4; i++)
|
|
rx_enabled |= rd32(E1000_RXDCTL(i));
|
|
if (!(rx_enabled & E1000_RXDCTL_QUEUE_ENABLE))
|
|
break;
|
|
}
|
|
|
|
if (ms_wait == 10)
|
|
hw_dbg("Queue disable timed out after 10ms\n");
|
|
|
|
/* Clear RLPML, RCTL.SBP, RFCTL.LEF, and set RCTL.LPE so that all
|
|
* incoming packets are rejected. Set enable and wait 2ms so that
|
|
* any packet that was coming in as RCTL.EN was set is flushed
|
|
*/
|
|
rfctl = rd32(E1000_RFCTL);
|
|
wr32(E1000_RFCTL, rfctl & ~E1000_RFCTL_LEF);
|
|
|
|
rlpml = rd32(E1000_RLPML);
|
|
wr32(E1000_RLPML, 0);
|
|
|
|
rctl = rd32(E1000_RCTL);
|
|
temp_rctl = rctl & ~(E1000_RCTL_EN | E1000_RCTL_SBP);
|
|
temp_rctl |= E1000_RCTL_LPE;
|
|
|
|
wr32(E1000_RCTL, temp_rctl);
|
|
wr32(E1000_RCTL, temp_rctl | E1000_RCTL_EN);
|
|
wrfl();
|
|
msleep(2);
|
|
|
|
/* Enable RX queues that were previously enabled and restore our
|
|
* previous state
|
|
*/
|
|
for (i = 0; i < 4; i++)
|
|
wr32(E1000_RXDCTL(i), rxdctl[i]);
|
|
wr32(E1000_RCTL, rctl);
|
|
wrfl();
|
|
|
|
wr32(E1000_RLPML, rlpml);
|
|
wr32(E1000_RFCTL, rfctl);
|
|
|
|
/* Flush receive errors generated by workaround */
|
|
rd32(E1000_ROC);
|
|
rd32(E1000_RNBC);
|
|
rd32(E1000_MPC);
|
|
}
|
|
|
|
/**
|
|
* igb_set_pcie_completion_timeout - set pci-e completion timeout
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* The defaults for 82575 and 82576 should be in the range of 50us to 50ms,
|
|
* however the hardware default for these parts is 500us to 1ms which is less
|
|
* than the 10ms recommended by the pci-e spec. To address this we need to
|
|
* increase the value to either 10ms to 200ms for capability version 1 config,
|
|
* or 16ms to 55ms for version 2.
|
|
**/
|
|
static s32 igb_set_pcie_completion_timeout(struct e1000_hw *hw)
|
|
{
|
|
u32 gcr = rd32(E1000_GCR);
|
|
s32 ret_val = 0;
|
|
u16 pcie_devctl2;
|
|
|
|
/* only take action if timeout value is defaulted to 0 */
|
|
if (gcr & E1000_GCR_CMPL_TMOUT_MASK)
|
|
goto out;
|
|
|
|
/*
|
|
* if capababilities version is type 1 we can write the
|
|
* timeout of 10ms to 200ms through the GCR register
|
|
*/
|
|
if (!(gcr & E1000_GCR_CAP_VER2)) {
|
|
gcr |= E1000_GCR_CMPL_TMOUT_10ms;
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* for version 2 capabilities we need to write the config space
|
|
* directly in order to set the completion timeout value for
|
|
* 16ms to 55ms
|
|
*/
|
|
ret_val = igb_read_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2,
|
|
&pcie_devctl2);
|
|
if (ret_val)
|
|
goto out;
|
|
|
|
pcie_devctl2 |= PCIE_DEVICE_CONTROL2_16ms;
|
|
|
|
ret_val = igb_write_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2,
|
|
&pcie_devctl2);
|
|
out:
|
|
/* disable completion timeout resend */
|
|
gcr &= ~E1000_GCR_CMPL_TMOUT_RESEND;
|
|
|
|
wr32(E1000_GCR, gcr);
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igb_vmdq_set_anti_spoofing_pf - enable or disable anti-spoofing
|
|
* @hw: pointer to the hardware struct
|
|
* @enable: state to enter, either enabled or disabled
|
|
* @pf: Physical Function pool - do not set anti-spoofing for the PF
|
|
*
|
|
* enables/disables L2 switch anti-spoofing functionality.
|
|
**/
|
|
void igb_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf)
|
|
{
|
|
u32 dtxswc;
|
|
|
|
switch (hw->mac.type) {
|
|
case e1000_82576:
|
|
case e1000_i350:
|
|
dtxswc = rd32(E1000_DTXSWC);
|
|
if (enable) {
|
|
dtxswc |= (E1000_DTXSWC_MAC_SPOOF_MASK |
|
|
E1000_DTXSWC_VLAN_SPOOF_MASK);
|
|
/* The PF can spoof - it has to in order to
|
|
* support emulation mode NICs */
|
|
dtxswc ^= (1 << pf | 1 << (pf + MAX_NUM_VFS));
|
|
} else {
|
|
dtxswc &= ~(E1000_DTXSWC_MAC_SPOOF_MASK |
|
|
E1000_DTXSWC_VLAN_SPOOF_MASK);
|
|
}
|
|
wr32(E1000_DTXSWC, dtxswc);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* igb_vmdq_set_loopback_pf - enable or disable vmdq loopback
|
|
* @hw: pointer to the hardware struct
|
|
* @enable: state to enter, either enabled or disabled
|
|
*
|
|
* enables/disables L2 switch loopback functionality.
|
|
**/
|
|
void igb_vmdq_set_loopback_pf(struct e1000_hw *hw, bool enable)
|
|
{
|
|
u32 dtxswc = rd32(E1000_DTXSWC);
|
|
|
|
if (enable)
|
|
dtxswc |= E1000_DTXSWC_VMDQ_LOOPBACK_EN;
|
|
else
|
|
dtxswc &= ~E1000_DTXSWC_VMDQ_LOOPBACK_EN;
|
|
|
|
wr32(E1000_DTXSWC, dtxswc);
|
|
}
|
|
|
|
/**
|
|
* igb_vmdq_set_replication_pf - enable or disable vmdq replication
|
|
* @hw: pointer to the hardware struct
|
|
* @enable: state to enter, either enabled or disabled
|
|
*
|
|
* enables/disables replication of packets across multiple pools.
|
|
**/
|
|
void igb_vmdq_set_replication_pf(struct e1000_hw *hw, bool enable)
|
|
{
|
|
u32 vt_ctl = rd32(E1000_VT_CTL);
|
|
|
|
if (enable)
|
|
vt_ctl |= E1000_VT_CTL_VM_REPL_EN;
|
|
else
|
|
vt_ctl &= ~E1000_VT_CTL_VM_REPL_EN;
|
|
|
|
wr32(E1000_VT_CTL, vt_ctl);
|
|
}
|
|
|
|
/**
|
|
* igb_read_phy_reg_82580 - Read 82580 MDI control register
|
|
* @hw: pointer to the HW structure
|
|
* @offset: register offset to be read
|
|
* @data: pointer to the read data
|
|
*
|
|
* Reads the MDI control register in the PHY at offset and stores the
|
|
* information read to data.
|
|
**/
|
|
static s32 igb_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data)
|
|
{
|
|
s32 ret_val;
|
|
|
|
|
|
ret_val = hw->phy.ops.acquire(hw);
|
|
if (ret_val)
|
|
goto out;
|
|
|
|
ret_val = igb_read_phy_reg_mdic(hw, offset, data);
|
|
|
|
hw->phy.ops.release(hw);
|
|
|
|
out:
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igb_write_phy_reg_82580 - Write 82580 MDI control register
|
|
* @hw: pointer to the HW structure
|
|
* @offset: register offset to write to
|
|
* @data: data to write to register at offset
|
|
*
|
|
* Writes data to MDI control register in the PHY at offset.
|
|
**/
|
|
static s32 igb_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data)
|
|
{
|
|
s32 ret_val;
|
|
|
|
|
|
ret_val = hw->phy.ops.acquire(hw);
|
|
if (ret_val)
|
|
goto out;
|
|
|
|
ret_val = igb_write_phy_reg_mdic(hw, offset, data);
|
|
|
|
hw->phy.ops.release(hw);
|
|
|
|
out:
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igb_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* This resets the the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
|
|
* the values found in the EEPROM. This addresses an issue in which these
|
|
* bits are not restored from EEPROM after reset.
|
|
**/
|
|
static s32 igb_reset_mdicnfg_82580(struct e1000_hw *hw)
|
|
{
|
|
s32 ret_val = 0;
|
|
u32 mdicnfg;
|
|
u16 nvm_data = 0;
|
|
|
|
if (hw->mac.type != e1000_82580)
|
|
goto out;
|
|
if (!igb_sgmii_active_82575(hw))
|
|
goto out;
|
|
|
|
ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A +
|
|
NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1,
|
|
&nvm_data);
|
|
if (ret_val) {
|
|
hw_dbg("NVM Read Error\n");
|
|
goto out;
|
|
}
|
|
|
|
mdicnfg = rd32(E1000_MDICNFG);
|
|
if (nvm_data & NVM_WORD24_EXT_MDIO)
|
|
mdicnfg |= E1000_MDICNFG_EXT_MDIO;
|
|
if (nvm_data & NVM_WORD24_COM_MDIO)
|
|
mdicnfg |= E1000_MDICNFG_COM_MDIO;
|
|
wr32(E1000_MDICNFG, mdicnfg);
|
|
out:
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igb_reset_hw_82580 - Reset hardware
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* This resets function or entire device (all ports, etc.)
|
|
* to a known state.
|
|
**/
|
|
static s32 igb_reset_hw_82580(struct e1000_hw *hw)
|
|
{
|
|
s32 ret_val = 0;
|
|
/* BH SW mailbox bit in SW_FW_SYNC */
|
|
u16 swmbsw_mask = E1000_SW_SYNCH_MB;
|
|
u32 ctrl, icr;
|
|
bool global_device_reset = hw->dev_spec._82575.global_device_reset;
|
|
|
|
|
|
hw->dev_spec._82575.global_device_reset = false;
|
|
|
|
/* Get current control state. */
|
|
ctrl = rd32(E1000_CTRL);
|
|
|
|
/*
|
|
* Prevent the PCI-E bus from sticking if there is no TLP connection
|
|
* on the last TLP read/write transaction when MAC is reset.
|
|
*/
|
|
ret_val = igb_disable_pcie_master(hw);
|
|
if (ret_val)
|
|
hw_dbg("PCI-E Master disable polling has failed.\n");
|
|
|
|
hw_dbg("Masking off all interrupts\n");
|
|
wr32(E1000_IMC, 0xffffffff);
|
|
wr32(E1000_RCTL, 0);
|
|
wr32(E1000_TCTL, E1000_TCTL_PSP);
|
|
wrfl();
|
|
|
|
msleep(10);
|
|
|
|
/* Determine whether or not a global dev reset is requested */
|
|
if (global_device_reset &&
|
|
igb_acquire_swfw_sync_82575(hw, swmbsw_mask))
|
|
global_device_reset = false;
|
|
|
|
if (global_device_reset &&
|
|
!(rd32(E1000_STATUS) & E1000_STAT_DEV_RST_SET))
|
|
ctrl |= E1000_CTRL_DEV_RST;
|
|
else
|
|
ctrl |= E1000_CTRL_RST;
|
|
|
|
wr32(E1000_CTRL, ctrl);
|
|
|
|
/* Add delay to insure DEV_RST has time to complete */
|
|
if (global_device_reset)
|
|
msleep(5);
|
|
|
|
ret_val = igb_get_auto_rd_done(hw);
|
|
if (ret_val) {
|
|
/*
|
|
* When auto config read does not complete, do not
|
|
* return with an error. This can happen in situations
|
|
* where there is no eeprom and prevents getting link.
|
|
*/
|
|
hw_dbg("Auto Read Done did not complete\n");
|
|
}
|
|
|
|
/* If EEPROM is not present, run manual init scripts */
|
|
if ((rd32(E1000_EECD) & E1000_EECD_PRES) == 0)
|
|
igb_reset_init_script_82575(hw);
|
|
|
|
/* clear global device reset status bit */
|
|
wr32(E1000_STATUS, E1000_STAT_DEV_RST_SET);
|
|
|
|
/* Clear any pending interrupt events. */
|
|
wr32(E1000_IMC, 0xffffffff);
|
|
icr = rd32(E1000_ICR);
|
|
|
|
ret_val = igb_reset_mdicnfg_82580(hw);
|
|
if (ret_val)
|
|
hw_dbg("Could not reset MDICNFG based on EEPROM\n");
|
|
|
|
/* Install any alternate MAC address into RAR0 */
|
|
ret_val = igb_check_alt_mac_addr(hw);
|
|
|
|
/* Release semaphore */
|
|
if (global_device_reset)
|
|
igb_release_swfw_sync_82575(hw, swmbsw_mask);
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igb_rxpbs_adjust_82580 - adjust RXPBS value to reflect actual RX PBA size
|
|
* @data: data received by reading RXPBS register
|
|
*
|
|
* The 82580 uses a table based approach for packet buffer allocation sizes.
|
|
* This function converts the retrieved value into the correct table value
|
|
* 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7
|
|
* 0x0 36 72 144 1 2 4 8 16
|
|
* 0x8 35 70 140 rsv rsv rsv rsv rsv
|
|
*/
|
|
u16 igb_rxpbs_adjust_82580(u32 data)
|
|
{
|
|
u16 ret_val = 0;
|
|
|
|
if (data < E1000_82580_RXPBS_TABLE_SIZE)
|
|
ret_val = e1000_82580_rxpbs_table[data];
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igb_validate_nvm_checksum_with_offset - Validate EEPROM
|
|
* checksum
|
|
* @hw: pointer to the HW structure
|
|
* @offset: offset in words of the checksum protected region
|
|
*
|
|
* Calculates the EEPROM checksum by reading/adding each word of the EEPROM
|
|
* and then verifies that the sum of the EEPROM is equal to 0xBABA.
|
|
**/
|
|
s32 igb_validate_nvm_checksum_with_offset(struct e1000_hw *hw, u16 offset)
|
|
{
|
|
s32 ret_val = 0;
|
|
u16 checksum = 0;
|
|
u16 i, nvm_data;
|
|
|
|
for (i = offset; i < ((NVM_CHECKSUM_REG + offset) + 1); i++) {
|
|
ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
|
|
if (ret_val) {
|
|
hw_dbg("NVM Read Error\n");
|
|
goto out;
|
|
}
|
|
checksum += nvm_data;
|
|
}
|
|
|
|
if (checksum != (u16) NVM_SUM) {
|
|
hw_dbg("NVM Checksum Invalid\n");
|
|
ret_val = -E1000_ERR_NVM;
|
|
goto out;
|
|
}
|
|
|
|
out:
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igb_update_nvm_checksum_with_offset - Update EEPROM
|
|
* checksum
|
|
* @hw: pointer to the HW structure
|
|
* @offset: offset in words of the checksum protected region
|
|
*
|
|
* Updates the EEPROM checksum by reading/adding each word of the EEPROM
|
|
* up to the checksum. Then calculates the EEPROM checksum and writes the
|
|
* value to the EEPROM.
|
|
**/
|
|
s32 igb_update_nvm_checksum_with_offset(struct e1000_hw *hw, u16 offset)
|
|
{
|
|
s32 ret_val;
|
|
u16 checksum = 0;
|
|
u16 i, nvm_data;
|
|
|
|
for (i = offset; i < (NVM_CHECKSUM_REG + offset); i++) {
|
|
ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
|
|
if (ret_val) {
|
|
hw_dbg("NVM Read Error while updating checksum.\n");
|
|
goto out;
|
|
}
|
|
checksum += nvm_data;
|
|
}
|
|
checksum = (u16) NVM_SUM - checksum;
|
|
ret_val = hw->nvm.ops.write(hw, (NVM_CHECKSUM_REG + offset), 1,
|
|
&checksum);
|
|
if (ret_val)
|
|
hw_dbg("NVM Write Error while updating checksum.\n");
|
|
|
|
out:
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igb_validate_nvm_checksum_82580 - Validate EEPROM checksum
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Calculates the EEPROM section checksum by reading/adding each word of
|
|
* the EEPROM and then verifies that the sum of the EEPROM is
|
|
* equal to 0xBABA.
|
|
**/
|
|
static s32 igb_validate_nvm_checksum_82580(struct e1000_hw *hw)
|
|
{
|
|
s32 ret_val = 0;
|
|
u16 eeprom_regions_count = 1;
|
|
u16 j, nvm_data;
|
|
u16 nvm_offset;
|
|
|
|
ret_val = hw->nvm.ops.read(hw, NVM_COMPATIBILITY_REG_3, 1, &nvm_data);
|
|
if (ret_val) {
|
|
hw_dbg("NVM Read Error\n");
|
|
goto out;
|
|
}
|
|
|
|
if (nvm_data & NVM_COMPATIBILITY_BIT_MASK) {
|
|
/* if checksums compatibility bit is set validate checksums
|
|
* for all 4 ports. */
|
|
eeprom_regions_count = 4;
|
|
}
|
|
|
|
for (j = 0; j < eeprom_regions_count; j++) {
|
|
nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
|
|
ret_val = igb_validate_nvm_checksum_with_offset(hw,
|
|
nvm_offset);
|
|
if (ret_val != 0)
|
|
goto out;
|
|
}
|
|
|
|
out:
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igb_update_nvm_checksum_82580 - Update EEPROM checksum
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Updates the EEPROM section checksums for all 4 ports by reading/adding
|
|
* each word of the EEPROM up to the checksum. Then calculates the EEPROM
|
|
* checksum and writes the value to the EEPROM.
|
|
**/
|
|
static s32 igb_update_nvm_checksum_82580(struct e1000_hw *hw)
|
|
{
|
|
s32 ret_val;
|
|
u16 j, nvm_data;
|
|
u16 nvm_offset;
|
|
|
|
ret_val = hw->nvm.ops.read(hw, NVM_COMPATIBILITY_REG_3, 1, &nvm_data);
|
|
if (ret_val) {
|
|
hw_dbg("NVM Read Error while updating checksum"
|
|
" compatibility bit.\n");
|
|
goto out;
|
|
}
|
|
|
|
if ((nvm_data & NVM_COMPATIBILITY_BIT_MASK) == 0) {
|
|
/* set compatibility bit to validate checksums appropriately */
|
|
nvm_data = nvm_data | NVM_COMPATIBILITY_BIT_MASK;
|
|
ret_val = hw->nvm.ops.write(hw, NVM_COMPATIBILITY_REG_3, 1,
|
|
&nvm_data);
|
|
if (ret_val) {
|
|
hw_dbg("NVM Write Error while updating checksum"
|
|
" compatibility bit.\n");
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
for (j = 0; j < 4; j++) {
|
|
nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
|
|
ret_val = igb_update_nvm_checksum_with_offset(hw, nvm_offset);
|
|
if (ret_val)
|
|
goto out;
|
|
}
|
|
|
|
out:
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igb_validate_nvm_checksum_i350 - Validate EEPROM checksum
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Calculates the EEPROM section checksum by reading/adding each word of
|
|
* the EEPROM and then verifies that the sum of the EEPROM is
|
|
* equal to 0xBABA.
|
|
**/
|
|
static s32 igb_validate_nvm_checksum_i350(struct e1000_hw *hw)
|
|
{
|
|
s32 ret_val = 0;
|
|
u16 j;
|
|
u16 nvm_offset;
|
|
|
|
for (j = 0; j < 4; j++) {
|
|
nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
|
|
ret_val = igb_validate_nvm_checksum_with_offset(hw,
|
|
nvm_offset);
|
|
if (ret_val != 0)
|
|
goto out;
|
|
}
|
|
|
|
out:
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igb_update_nvm_checksum_i350 - Update EEPROM checksum
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Updates the EEPROM section checksums for all 4 ports by reading/adding
|
|
* each word of the EEPROM up to the checksum. Then calculates the EEPROM
|
|
* checksum and writes the value to the EEPROM.
|
|
**/
|
|
static s32 igb_update_nvm_checksum_i350(struct e1000_hw *hw)
|
|
{
|
|
s32 ret_val = 0;
|
|
u16 j;
|
|
u16 nvm_offset;
|
|
|
|
for (j = 0; j < 4; j++) {
|
|
nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
|
|
ret_val = igb_update_nvm_checksum_with_offset(hw, nvm_offset);
|
|
if (ret_val != 0)
|
|
goto out;
|
|
}
|
|
|
|
out:
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igb_set_eee_i350 - Enable/disable EEE support
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Enable/disable EEE based on setting in dev_spec structure.
|
|
*
|
|
**/
|
|
s32 igb_set_eee_i350(struct e1000_hw *hw)
|
|
{
|
|
s32 ret_val = 0;
|
|
u32 ipcnfg, eeer, ctrl_ext;
|
|
|
|
ctrl_ext = rd32(E1000_CTRL_EXT);
|
|
if ((hw->mac.type != e1000_i350) ||
|
|
(ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK))
|
|
goto out;
|
|
ipcnfg = rd32(E1000_IPCNFG);
|
|
eeer = rd32(E1000_EEER);
|
|
|
|
/* enable or disable per user setting */
|
|
if (!(hw->dev_spec._82575.eee_disable)) {
|
|
ipcnfg |= (E1000_IPCNFG_EEE_1G_AN |
|
|
E1000_IPCNFG_EEE_100M_AN);
|
|
eeer |= (E1000_EEER_TX_LPI_EN |
|
|
E1000_EEER_RX_LPI_EN |
|
|
E1000_EEER_LPI_FC);
|
|
|
|
} else {
|
|
ipcnfg &= ~(E1000_IPCNFG_EEE_1G_AN |
|
|
E1000_IPCNFG_EEE_100M_AN);
|
|
eeer &= ~(E1000_EEER_TX_LPI_EN |
|
|
E1000_EEER_RX_LPI_EN |
|
|
E1000_EEER_LPI_FC);
|
|
}
|
|
wr32(E1000_IPCNFG, ipcnfg);
|
|
wr32(E1000_EEER, eeer);
|
|
out:
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
static struct e1000_mac_operations e1000_mac_ops_82575 = {
|
|
.init_hw = igb_init_hw_82575,
|
|
.check_for_link = igb_check_for_link_82575,
|
|
.rar_set = igb_rar_set,
|
|
.read_mac_addr = igb_read_mac_addr_82575,
|
|
.get_speed_and_duplex = igb_get_speed_and_duplex_copper,
|
|
};
|
|
|
|
static struct e1000_phy_operations e1000_phy_ops_82575 = {
|
|
.acquire = igb_acquire_phy_82575,
|
|
.get_cfg_done = igb_get_cfg_done_82575,
|
|
.release = igb_release_phy_82575,
|
|
};
|
|
|
|
static struct e1000_nvm_operations e1000_nvm_ops_82575 = {
|
|
.acquire = igb_acquire_nvm_82575,
|
|
.read = igb_read_nvm_eerd,
|
|
.release = igb_release_nvm_82575,
|
|
.write = igb_write_nvm_spi,
|
|
};
|
|
|
|
const struct e1000_info e1000_82575_info = {
|
|
.get_invariants = igb_get_invariants_82575,
|
|
.mac_ops = &e1000_mac_ops_82575,
|
|
.phy_ops = &e1000_phy_ops_82575,
|
|
.nvm_ops = &e1000_nvm_ops_82575,
|
|
};
|
|
|