linux-stable/drivers/scsi/sym53c8xx_2/sym_glue.h
Thomas Gleixner 1a59d1b8e0 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not write to the free software foundation inc
  59 temple place suite 330 boston ma 02111 1307 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1334 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:35 -07:00

257 lines
6.5 KiB
C

/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Device driver for the SYMBIOS/LSILOGIC 53C8XX and 53C1010 family
* of PCI-SCSI IO processors.
*
* Copyright (C) 1999-2001 Gerard Roudier <groudier@free.fr>
*
* This driver is derived from the Linux sym53c8xx driver.
* Copyright (C) 1998-2000 Gerard Roudier
*
* The sym53c8xx driver is derived from the ncr53c8xx driver that had been
* a port of the FreeBSD ncr driver to Linux-1.2.13.
*
* The original ncr driver has been written for 386bsd and FreeBSD by
* Wolfgang Stanglmeier <wolf@cologne.de>
* Stefan Esser <se@mi.Uni-Koeln.de>
* Copyright (C) 1994 Wolfgang Stanglmeier
*
* Other major contributions:
*
* NVRAM detection and reading.
* Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
*
*-----------------------------------------------------------------------------
*/
#ifndef SYM_GLUE_H
#define SYM_GLUE_H
#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/pci.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/types.h>
#include <asm/io.h>
#ifdef __sparc__
# include <asm/irq.h>
#endif
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_transport_spi.h>
#include <scsi/scsi_host.h>
#include "sym53c8xx.h"
#include "sym_defs.h"
#include "sym_misc.h"
/*
* Configuration addendum for Linux.
*/
#define SYM_CONF_TIMER_INTERVAL ((HZ+1)/2)
#undef SYM_OPT_HANDLE_DEVICE_QUEUEING
#define SYM_OPT_LIMIT_COMMAND_REORDERING
/*
* Print a message with severity.
*/
#define printf_emerg(args...) printk(KERN_EMERG args)
#define printf_alert(args...) printk(KERN_ALERT args)
#define printf_crit(args...) printk(KERN_CRIT args)
#define printf_err(args...) printk(KERN_ERR args)
#define printf_warning(args...) printk(KERN_WARNING args)
#define printf_notice(args...) printk(KERN_NOTICE args)
#define printf_info(args...) printk(KERN_INFO args)
#define printf_debug(args...) printk(KERN_DEBUG args)
#define printf(args...) printk(args)
/*
* A 'read barrier' flushes any data that have been prefetched
* by the processor due to out of order execution. Such a barrier
* must notably be inserted prior to looking at data that have
* been DMAed, assuming that program does memory READs in proper
* order and that the device ensured proper ordering of WRITEs.
*
* A 'write barrier' prevents any previous WRITEs to pass further
* WRITEs. Such barriers must be inserted each time another agent
* relies on ordering of WRITEs.
*
* Note that, due to posting of PCI memory writes, we also must
* insert dummy PCI read transactions when some ordering involving
* both directions over the PCI does matter. PCI transactions are
* fully ordered in each direction.
*/
#define MEMORY_READ_BARRIER() rmb()
#define MEMORY_WRITE_BARRIER() wmb()
/*
* IO functions definition for big/little endian CPU support.
* For now, PCI chips are only supported in little endian addressing mode,
*/
#ifdef __BIG_ENDIAN
#define readw_l2b readw
#define readl_l2b readl
#define writew_b2l writew
#define writel_b2l writel
#else /* little endian */
#define readw_raw readw
#define readl_raw readl
#define writew_raw writew
#define writel_raw writel
#endif /* endian */
#ifdef SYM_CONF_CHIP_BIG_ENDIAN
#error "Chips in BIG ENDIAN addressing mode are not (yet) supported"
#endif
/*
* If the CPU and the chip use same endian-ness addressing,
* no byte reordering is needed for script patching.
* Macro cpu_to_scr() is to be used for script patching.
* Macro scr_to_cpu() is to be used for getting a DWORD
* from the script.
*/
#define cpu_to_scr(dw) cpu_to_le32(dw)
#define scr_to_cpu(dw) le32_to_cpu(dw)
/*
* These ones are used as return code from
* error recovery handlers under Linux.
*/
#define SCSI_SUCCESS SUCCESS
#define SCSI_FAILED FAILED
/*
* System specific target data structure.
* None for now, under Linux.
*/
/* #define SYM_HAVE_STCB */
/*
* System specific lun data structure.
*/
#define SYM_HAVE_SLCB
struct sym_slcb {
u_short reqtags; /* Number of tags requested by user */
u_short scdev_depth; /* Queue depth set in select_queue_depth() */
};
/*
* System specific command data structure.
* Not needed under Linux.
*/
/* struct sym_sccb */
/*
* System specific host data structure.
*/
struct sym_shcb {
/*
* Chip and controller identification.
*/
int unit;
char inst_name[16];
char chip_name[8];
struct Scsi_Host *host;
void __iomem * ioaddr; /* MMIO kernel io address */
void __iomem * ramaddr; /* RAM kernel io address */
struct timer_list timer; /* Timer handler link header */
u_long lasttime;
u_long settle_time; /* Resetting the SCSI BUS */
u_char settle_time_valid;
};
/*
* Return the name of the controller.
*/
#define sym_name(np) (np)->s.inst_name
struct sym_nvram;
/*
* The IO macros require a struct called 's' and are abused in sym_nvram.c
*/
struct sym_device {
struct pci_dev *pdev;
unsigned long mmio_base;
unsigned long ram_base;
struct {
void __iomem *ioaddr;
void __iomem *ramaddr;
} s;
struct sym_chip chip;
struct sym_nvram *nvram;
u_char host_id;
};
/*
* Driver host data structure.
*/
struct sym_data {
struct sym_hcb *ncb;
struct completion *io_reset; /* PCI error handling */
struct pci_dev *pdev;
};
static inline struct sym_hcb * sym_get_hcb(struct Scsi_Host *host)
{
return ((struct sym_data *)host->hostdata)->ncb;
}
#include "sym_fw.h"
#include "sym_hipd.h"
/*
* Set the status field of a CAM CCB.
*/
static inline void
sym_set_cam_status(struct scsi_cmnd *cmd, int status)
{
cmd->result &= ~(0xff << 16);
cmd->result |= (status << 16);
}
/*
* Get the status field of a CAM CCB.
*/
static inline int
sym_get_cam_status(struct scsi_cmnd *cmd)
{
return host_byte(cmd->result);
}
/*
* Build CAM result for a successful IO and for a failed IO.
*/
static inline void sym_set_cam_result_ok(struct sym_ccb *cp, struct scsi_cmnd *cmd, int resid)
{
scsi_set_resid(cmd, resid);
cmd->result = (DID_OK << 16) | (cp->ssss_status & 0x7f);
}
void sym_set_cam_result_error(struct sym_hcb *np, struct sym_ccb *cp, int resid);
void sym_xpt_done(struct sym_hcb *np, struct scsi_cmnd *ccb);
#define sym_print_addr(cmd, arg...) dev_info(&cmd->device->sdev_gendev , ## arg)
void sym_xpt_async_bus_reset(struct sym_hcb *np);
int sym_setup_data_and_start (struct sym_hcb *np, struct scsi_cmnd *csio, struct sym_ccb *cp);
void sym_log_bus_error(struct Scsi_Host *);
void sym_dump_registers(struct Scsi_Host *);
#endif /* SYM_GLUE_H */