mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-09-25 11:55:37 +00:00
Code Issues Releases Wiki Activity
linux-stable/drivers/clk/sunxi-ng/ccu-sun50i-h616.c
Samuel Holland 9bec2b9c61
clk: sunxi-ng: Unregister clocks/resets when unbinding 
Currently, unbinding a CCU driver unmaps the device's MMIO region, while
leaving its clocks/resets and their providers registered. This can cause
a page fault later when some clock operation tries to perform MMIO. Fix
this by separating the CCU initialization from the memory allocation,
and then using a devres callback to unregister the clocks and resets.

This also fixes a memory leak of the `struct ccu_reset`, and uses the
correct owner (the specific platform driver) for the clocks and resets.

Early OF clock providers are never unregistered, and limited error
handling is possible, so they are mostly unchanged. The error reporting
is made more consistent by moving the message inside of_sunxi_ccu_probe.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210901050526.45673-2-samuel@sholland.org
2021-09-13 09:03:20 +02:00

1148 lines
36 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2020 Arm Ltd.
* Based on the H6 CCU driver, which is:
* Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.io>
*/
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include "ccu_common.h"
#include "ccu_reset.h"
#include "ccu_div.h"
#include "ccu_gate.h"
#include "ccu_mp.h"
#include "ccu_mult.h"
#include "ccu_nk.h"
#include "ccu_nkm.h"
#include "ccu_nkmp.h"
#include "ccu_nm.h"
#include "ccu-sun50i-h616.h"
/*
* The CPU PLL is actually NP clock, with P being /1, /2 or /4. However
* P should only be used for output frequencies lower than 288 MHz.
*
* For now we can just model it as a multiplier clock, and force P to /1.
*
* The M factor is present in the register's description, but not in the
* frequency formula, and it's documented as "M is only used for backdoor
* testing", so it's not modelled and then force to 0.
*/
#define SUN50I_H616_PLL_CPUX_REG 0x000
static struct ccu_mult pll_cpux_clk = {
.enable = BIT(31),
.lock = BIT(28),
.mult = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.common = {
.reg = 0x000,
.hw.init = CLK_HW_INIT("pll-cpux", "osc24M",
&ccu_mult_ops,
CLK_SET_RATE_UNGATE),
},
};
/* Some PLLs are input * N / div1 / P. Model them as NKMP with no K */
#define SUN50I_H616_PLL_DDR0_REG 0x010
static struct ccu_nkmp pll_ddr0_clk = {
.enable = BIT(31),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
.p = _SUNXI_CCU_DIV(0, 1), /* output divider */
.common = {
.reg = 0x010,
.hw.init = CLK_HW_INIT("pll-ddr0", "osc24M",
&ccu_nkmp_ops,
CLK_SET_RATE_UNGATE),
},
};
#define SUN50I_H616_PLL_DDR1_REG 0x018
static struct ccu_nkmp pll_ddr1_clk = {
.enable = BIT(31),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
.p = _SUNXI_CCU_DIV(0, 1), /* output divider */
.common = {
.reg = 0x018,
.hw.init = CLK_HW_INIT("pll-ddr1", "osc24M",
&ccu_nkmp_ops,
CLK_SET_RATE_UNGATE),
},
};
#define SUN50I_H616_PLL_PERIPH0_REG 0x020
static struct ccu_nkmp pll_periph0_clk = {
.enable = BIT(31),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
.p = _SUNXI_CCU_DIV(0, 1), /* output divider */
.fixed_post_div = 2,
.common = {
.reg = 0x020,
.features = CCU_FEATURE_FIXED_POSTDIV,
.hw.init = CLK_HW_INIT("pll-periph0", "osc24M",
&ccu_nkmp_ops,
CLK_SET_RATE_UNGATE),
},
};
#define SUN50I_H616_PLL_PERIPH1_REG 0x028
static struct ccu_nkmp pll_periph1_clk = {
.enable = BIT(31),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
.p = _SUNXI_CCU_DIV(0, 1), /* output divider */
.fixed_post_div = 2,
.common = {
.reg = 0x028,
.features = CCU_FEATURE_FIXED_POSTDIV,
.hw.init = CLK_HW_INIT("pll-periph1", "osc24M",
&ccu_nkmp_ops,
CLK_SET_RATE_UNGATE),
},
};
#define SUN50I_H616_PLL_GPU_REG 0x030
static struct ccu_nkmp pll_gpu_clk = {
.enable = BIT(31),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
.p = _SUNXI_CCU_DIV(0, 1), /* output divider */
.common = {
.reg = 0x030,
.hw.init = CLK_HW_INIT("pll-gpu", "osc24M",
&ccu_nkmp_ops,
CLK_SET_RATE_UNGATE),
},
};
/*
* For Video PLLs, the output divider is described as "used for testing"
* in the user manual. So it's not modelled and forced to 0.
*/
#define SUN50I_H616_PLL_VIDEO0_REG 0x040
static struct ccu_nm pll_video0_clk = {
.enable = BIT(31),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
.fixed_post_div = 4,
.min_rate = 288000000,
.max_rate = 2400000000UL,
.common = {
.reg = 0x040,
.features = CCU_FEATURE_FIXED_POSTDIV,
.hw.init = CLK_HW_INIT("pll-video0", "osc24M",
&ccu_nm_ops,
CLK_SET_RATE_UNGATE),
},
};
#define SUN50I_H616_PLL_VIDEO1_REG 0x048
static struct ccu_nm pll_video1_clk = {
.enable = BIT(31),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
.fixed_post_div = 4,
.min_rate = 288000000,
.max_rate = 2400000000UL,
.common = {
.reg = 0x048,
.features = CCU_FEATURE_FIXED_POSTDIV,
.hw.init = CLK_HW_INIT("pll-video1", "osc24M",
&ccu_nm_ops,
CLK_SET_RATE_UNGATE),
},
};
#define SUN50I_H616_PLL_VIDEO2_REG 0x050
static struct ccu_nm pll_video2_clk = {
.enable = BIT(31),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
.fixed_post_div = 4,
.min_rate = 288000000,
.max_rate = 2400000000UL,
.common = {
.reg = 0x050,
.features = CCU_FEATURE_FIXED_POSTDIV,
.hw.init = CLK_HW_INIT("pll-video2", "osc24M",
&ccu_nm_ops,
CLK_SET_RATE_UNGATE),
},
};
#define SUN50I_H616_PLL_VE_REG 0x058
static struct ccu_nkmp pll_ve_clk = {
.enable = BIT(31),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
.p = _SUNXI_CCU_DIV(0, 1), /* output divider */
.common = {
.reg = 0x058,
.hw.init = CLK_HW_INIT("pll-ve", "osc24M",
&ccu_nkmp_ops,
CLK_SET_RATE_UNGATE),
},
};
#define SUN50I_H616_PLL_DE_REG 0x060
static struct ccu_nkmp pll_de_clk = {
.enable = BIT(31),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
.p = _SUNXI_CCU_DIV(0, 1), /* output divider */
.common = {
.reg = 0x060,
.hw.init = CLK_HW_INIT("pll-de", "osc24M",
&ccu_nkmp_ops,
CLK_SET_RATE_UNGATE),
},
};
/*
* TODO: Determine SDM settings for the audio PLL. The manual suggests
* PLL_FACTOR_N=16, PLL_POST_DIV_P=2, OUTPUT_DIV=2, pattern=0xe000c49b
* for 24.576 MHz, and PLL_FACTOR_N=22, PLL_POST_DIV_P=3, OUTPUT_DIV=2,
* pattern=0xe001288c for 22.5792 MHz.
* This clashes with our fixed PLL_POST_DIV_P.
*/
#define SUN50I_H616_PLL_AUDIO_REG 0x078
static struct ccu_nm pll_audio_hs_clk = {
.enable = BIT(31),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
.common = {
.reg = 0x078,
.hw.init = CLK_HW_INIT("pll-audio-hs", "osc24M",
&ccu_nm_ops,
CLK_SET_RATE_UNGATE),
},
};
static const char * const cpux_parents[] = { "osc24M", "osc32k",
"iosc", "pll-cpux", "pll-periph0" };
static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents,
0x500, 24, 3, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x500, 0, 2, 0);
static SUNXI_CCU_M(cpux_apb_clk, "cpux-apb", "cpux", 0x500, 8, 2, 0);
static const char * const psi_ahb1_ahb2_parents[] = { "osc24M", "osc32k",
"iosc", "pll-periph0" };
static SUNXI_CCU_MP_WITH_MUX(psi_ahb1_ahb2_clk, "psi-ahb1-ahb2",
psi_ahb1_ahb2_parents,
0x510,
0, 2, /* M */
8, 2, /* P */
24, 2, /* mux */
0);
static const char * const ahb3_apb1_apb2_parents[] = { "osc24M", "osc32k",
"psi-ahb1-ahb2",
"pll-periph0" };
static SUNXI_CCU_MP_WITH_MUX(ahb3_clk, "ahb3", ahb3_apb1_apb2_parents, 0x51c,
0, 2, /* M */
8, 2, /* P */
24, 2, /* mux */
0);
static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", ahb3_apb1_apb2_parents, 0x520,
0, 2, /* M */
8, 2, /* P */
24, 2, /* mux */
0);
static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", ahb3_apb1_apb2_parents, 0x524,
0, 2, /* M */
8, 2, /* P */
24, 2, /* mux */
0);
static const char * const mbus_parents[] = { "osc24M", "pll-periph0-2x",
"pll-ddr0", "pll-ddr1" };
static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents, 0x540,
0, 3, /* M */
24, 2, /* mux */
BIT(31), /* gate */
CLK_IS_CRITICAL);
static const char * const de_parents[] = { "pll-de", "pll-periph0-2x" };
static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents, 0x600,
0, 4, /* M */
24, 1, /* mux */
BIT(31), /* gate */
CLK_SET_RATE_PARENT);
static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "psi-ahb1-ahb2",
0x60c, BIT(0), 0);
static SUNXI_CCU_M_WITH_MUX_GATE(deinterlace_clk, "deinterlace",
de_parents,
0x620,
0, 4, /* M */
24, 1, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_GATE(bus_deinterlace_clk, "bus-deinterlace", "psi-ahb1-ahb2",
0x62c, BIT(0), 0);
static SUNXI_CCU_M_WITH_MUX_GATE(g2d_clk, "g2d", de_parents, 0x630,
0, 4, /* M */
24, 1, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_GATE(bus_g2d_clk, "bus-g2d", "psi-ahb1-ahb2",
0x63c, BIT(0), 0);
static const char * const gpu0_parents[] = { "pll-gpu", "gpu1" };
static SUNXI_CCU_M_WITH_MUX_GATE(gpu0_clk, "gpu0", gpu0_parents, 0x670,
0, 2, /* M */
24, 1, /* mux */
BIT(31), /* gate */
CLK_SET_RATE_PARENT);
static SUNXI_CCU_M_WITH_GATE(gpu1_clk, "gpu1", "pll-periph0-2x", 0x674,
0, 2, /* M */
BIT(31),/* gate */
0);
static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "psi-ahb1-ahb2",
0x67c, BIT(0), 0);
static const char * const ce_parents[] = { "osc24M", "pll-periph0-2x" };
static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x680,
0, 4, /* M */
8, 2, /* N */
24, 1, /* mux */
BIT(31),/* gate */
0);
static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "psi-ahb1-ahb2",
0x68c, BIT(0), 0);
static const char * const ve_parents[] = { "pll-ve" };
static SUNXI_CCU_M_WITH_MUX_GATE(ve_clk, "ve", ve_parents, 0x690,
0, 3, /* M */
24, 1, /* mux */
BIT(31), /* gate */
CLK_SET_RATE_PARENT);
static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "psi-ahb1-ahb2",
0x69c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "psi-ahb1-ahb2",
0x70c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "psi-ahb1-ahb2",
0x73c, BIT(0), 0);
static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M", 0x740, BIT(31), 0);
static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "psi-ahb1-ahb2",
0x78c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_psi_clk, "bus-psi", "psi-ahb1-ahb2",
0x79c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_pwm_clk, "bus-pwm", "apb1", 0x7ac, BIT(0), 0);
static SUNXI_CCU_GATE(bus_iommu_clk, "bus-iommu", "apb1", 0x7bc, BIT(0), 0);
static const char * const dram_parents[] = { "pll-ddr0", "pll-ddr1" };
static struct ccu_div dram_clk = {
.div = _SUNXI_CCU_DIV(0, 2),
.mux = _SUNXI_CCU_MUX(24, 2),
.common = {
.reg = 0x800,
.hw.init = CLK_HW_INIT_PARENTS("dram",
dram_parents,
&ccu_div_ops,
CLK_IS_CRITICAL),
},
};
static SUNXI_CCU_GATE(mbus_dma_clk, "mbus-dma", "mbus",
0x804, BIT(0), 0);
static SUNXI_CCU_GATE(mbus_ve_clk, "mbus-ve", "mbus",
0x804, BIT(1), 0);
static SUNXI_CCU_GATE(mbus_ce_clk, "mbus-ce", "mbus",
0x804, BIT(2), 0);
static SUNXI_CCU_GATE(mbus_ts_clk, "mbus-ts", "mbus",
0x804, BIT(3), 0);
static SUNXI_CCU_GATE(mbus_nand_clk, "mbus-nand", "mbus",
0x804, BIT(5), 0);
static SUNXI_CCU_GATE(mbus_g2d_clk, "mbus-g2d", "mbus",
0x804, BIT(10), 0);
static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "psi-ahb1-ahb2",
0x80c, BIT(0), CLK_IS_CRITICAL);
static const char * const nand_spi_parents[] = { "osc24M", "pll-periph0",
"pll-periph1", "pll-periph0-2x",
"pll-periph1-2x" };
static SUNXI_CCU_MP_WITH_MUX_GATE(nand0_clk, "nand0", nand_spi_parents, 0x810,
0, 4, /* M */
8, 2, /* N */
24, 3, /* mux */
BIT(31),/* gate */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE(nand1_clk, "nand1", nand_spi_parents, 0x814,
0, 4, /* M */
8, 2, /* N */
24, 3, /* mux */
BIT(31),/* gate */
0);
static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb3", 0x82c, BIT(0), 0);
static const char * const mmc_parents[] = { "osc24M", "pll-periph0-2x",
"pll-periph1-2x" };
static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc0_clk, "mmc0", mmc_parents, 0x830,
0, 4, /* M */
8, 2, /* N */
24, 2, /* mux */
BIT(31), /* gate */
2, /* post-div */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc1_clk, "mmc1", mmc_parents, 0x834,
0, 4, /* M */
8, 2, /* N */
24, 2, /* mux */
BIT(31), /* gate */
2, /* post-div */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc2_clk, "mmc2", mmc_parents, 0x838,
0, 4, /* M */
8, 2, /* N */
24, 2, /* mux */
BIT(31), /* gate */
2, /* post-div */
0);
static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb3", 0x84c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb3", 0x84c, BIT(1), 0);
static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb3", 0x84c, BIT(2), 0);
static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2", 0x90c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2", 0x90c, BIT(1), 0);
static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2", 0x90c, BIT(2), 0);
static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2", 0x90c, BIT(3), 0);
static SUNXI_CCU_GATE(bus_uart4_clk, "bus-uart4", "apb2", 0x90c, BIT(4), 0);
static SUNXI_CCU_GATE(bus_uart5_clk, "bus-uart5", "apb2", 0x90c, BIT(5), 0);
static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2", 0x91c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2", 0x91c, BIT(1), 0);
static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2", 0x91c, BIT(2), 0);
static SUNXI_CCU_GATE(bus_i2c3_clk, "bus-i2c3", "apb2", 0x91c, BIT(3), 0);
static SUNXI_CCU_GATE(bus_i2c4_clk, "bus-i2c4", "apb2", 0x91c, BIT(4), 0);
static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", nand_spi_parents, 0x940,
0, 4, /* M */
8, 2, /* N */
24, 3, /* mux */
BIT(31),/* gate */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", nand_spi_parents, 0x944,
0, 4, /* M */
8, 2, /* N */
24, 3, /* mux */
BIT(31),/* gate */
0);
static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb3", 0x96c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb3", 0x96c, BIT(1), 0);
static SUNXI_CCU_GATE(emac_25m_clk, "emac-25m", "ahb3", 0x970,
BIT(31) | BIT(30), 0);
static SUNXI_CCU_GATE(bus_emac0_clk, "bus-emac0", "ahb3", 0x97c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_emac1_clk, "bus-emac1", "ahb3", 0x97c, BIT(1), 0);
static const char * const ts_parents[] = { "osc24M", "pll-periph0" };
static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", ts_parents, 0x9b0,
0, 4, /* M */
8, 2, /* N */
24, 1, /* mux */
BIT(31),/* gate */
0);
static SUNXI_CCU_GATE(bus_ts_clk, "bus-ts", "ahb3", 0x9bc, BIT(0), 0);
static SUNXI_CCU_GATE(bus_ths_clk, "bus-ths", "apb1", 0x9fc, BIT(0), 0);
static const char * const audio_parents[] = { "pll-audio-1x", "pll-audio-2x",
"pll-audio-4x", "pll-audio-hs" };
static struct ccu_div spdif_clk = {
.enable = BIT(31),
.div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
.mux = _SUNXI_CCU_MUX(24, 2),
.common = {
.reg = 0xa20,
.hw.init = CLK_HW_INIT_PARENTS("spdif",
audio_parents,
&ccu_div_ops,
0),
},
};
static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb1", 0xa2c, BIT(0), 0);
static struct ccu_div dmic_clk = {
.enable = BIT(31),
.div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
.mux = _SUNXI_CCU_MUX(24, 2),
.common = {
.reg = 0xa40,
.hw.init = CLK_HW_INIT_PARENTS("dmic",
audio_parents,
&ccu_div_ops,
0),
},
};
static SUNXI_CCU_GATE(bus_dmic_clk, "bus-dmic", "apb1", 0xa4c, BIT(0), 0);
static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_1x_clk, "audio-codec-1x",
audio_parents, 0xa50,
0, 4, /* M */
24, 2, /* mux */
BIT(31), /* gate */
CLK_SET_RATE_PARENT);
static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_4x_clk, "audio-codec-4x",
audio_parents, 0xa54,
0, 4, /* M */
24, 2, /* mux */
BIT(31), /* gate */
CLK_SET_RATE_PARENT);
static SUNXI_CCU_GATE(bus_audio_codec_clk, "bus-audio-codec", "apb1", 0xa5c,
BIT(0), 0);
static struct ccu_div audio_hub_clk = {
.enable = BIT(31),
.div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
.mux = _SUNXI_CCU_MUX(24, 2),
.common = {
.reg = 0xa60,
.hw.init = CLK_HW_INIT_PARENTS("audio-hub",
audio_parents,
&ccu_div_ops,
0),
},
};
static SUNXI_CCU_GATE(bus_audio_hub_clk, "bus-audio-hub", "apb1", 0xa6c, BIT(0), 0);
/*
* There are OHCI 12M clock source selection bits for the four USB 2.0 ports.
* We will force them to 0 (12M divided from 48M).
*/
#define SUN50I_H616_USB0_CLK_REG 0xa70
#define SUN50I_H616_USB1_CLK_REG 0xa74
#define SUN50I_H616_USB2_CLK_REG 0xa78
#define SUN50I_H616_USB3_CLK_REG 0xa7c
static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc12M", 0xa70, BIT(31), 0);
static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M", 0xa70, BIT(29), 0);
static SUNXI_CCU_GATE(usb_ohci1_clk, "usb-ohci1", "osc12M", 0xa74, BIT(31), 0);
static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "osc24M", 0xa74, BIT(29), 0);
static SUNXI_CCU_GATE(usb_ohci2_clk, "usb-ohci2", "osc12M", 0xa78, BIT(31), 0);
static SUNXI_CCU_GATE(usb_phy2_clk, "usb-phy2", "osc24M", 0xa78, BIT(29), 0);
static SUNXI_CCU_GATE(usb_ohci3_clk, "usb-ohci3", "osc12M", 0xa7c, BIT(31), 0);
static SUNXI_CCU_GATE(usb_phy3_clk, "usb-phy3", "osc24M", 0xa7c, BIT(29), 0);
static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb3", 0xa8c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_ohci1_clk, "bus-ohci1", "ahb3", 0xa8c, BIT(1), 0);
static SUNXI_CCU_GATE(bus_ohci2_clk, "bus-ohci2", "ahb3", 0xa8c, BIT(2), 0);
static SUNXI_CCU_GATE(bus_ohci3_clk, "bus-ohci3", "ahb3", 0xa8c, BIT(3), 0);
static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb3", 0xa8c, BIT(4), 0);
static SUNXI_CCU_GATE(bus_ehci1_clk, "bus-ehci1", "ahb3", 0xa8c, BIT(5), 0);
static SUNXI_CCU_GATE(bus_ehci2_clk, "bus-ehci2", "ahb3", 0xa8c, BIT(6), 0);
static SUNXI_CCU_GATE(bus_ehci3_clk, "bus-ehci3", "ahb3", 0xa8c, BIT(7), 0);
static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb3", 0xa8c, BIT(8), 0);
static SUNXI_CCU_GATE(bus_keyadc_clk, "bus-keyadc", "apb1", 0xa9c, BIT(0), 0);
static const char * const hdmi_parents[] = { "pll-video0", "pll-video0-4x",
"pll-video2", "pll-video2-4x" };
static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents, 0xb00,
0, 4, /* M */
24, 2, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_GATE(hdmi_slow_clk, "hdmi-slow", "osc24M", 0xb04, BIT(31), 0);
static const char * const hdmi_cec_parents[] = { "osc32k", "pll-periph0-2x" };
static const struct ccu_mux_fixed_prediv hdmi_cec_predivs[] = {
{ .index = 1, .div = 36621 },
};
#define SUN50I_H616_HDMI_CEC_CLK_REG 0xb10
static struct ccu_mux hdmi_cec_clk = {
.enable = BIT(31) | BIT(30),
.mux = {
.shift = 24,
.width = 2,
.fixed_predivs = hdmi_cec_predivs,
.n_predivs = ARRAY_SIZE(hdmi_cec_predivs),
},
.common = {
.reg = 0xb10,
.features = CCU_FEATURE_FIXED_PREDIV,
.hw.init = CLK_HW_INIT_PARENTS("hdmi-cec",
hdmi_cec_parents,
&ccu_mux_ops,
0),
},
};
static SUNXI_CCU_GATE(bus_hdmi_clk, "bus-hdmi", "ahb3", 0xb1c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_tcon_top_clk, "bus-tcon-top", "ahb3",
0xb5c, BIT(0), 0);
static const char * const tcon_tv_parents[] = { "pll-video0",
"pll-video0-4x",
"pll-video1",
"pll-video1-4x" };
static SUNXI_CCU_MP_WITH_MUX_GATE(tcon_tv0_clk, "tcon-tv0",
tcon_tv_parents, 0xb80,
0, 4, /* M */
8, 2, /* P */
24, 3, /* mux */
BIT(31), /* gate */
CLK_SET_RATE_PARENT);
static SUNXI_CCU_MP_WITH_MUX_GATE(tcon_tv1_clk, "tcon-tv1",
tcon_tv_parents, 0xb84,
0, 4, /* M */
8, 2, /* P */
24, 3, /* mux */
BIT(31), /* gate */
CLK_SET_RATE_PARENT);
static SUNXI_CCU_GATE(bus_tcon_tv0_clk, "bus-tcon-tv0", "ahb3",
0xb9c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_tcon_tv1_clk, "bus-tcon-tv1", "ahb3",
0xb9c, BIT(1), 0);
static SUNXI_CCU_MP_WITH_MUX_GATE(tve0_clk, "tve0",
tcon_tv_parents, 0xbb0,
0, 4, /* M */
8, 2, /* P */
24, 3, /* mux */
BIT(31), /* gate */
CLK_SET_RATE_PARENT);
static SUNXI_CCU_GATE(bus_tve_top_clk, "bus-tve-top", "ahb3",
0xbbc, BIT(0), 0);
static SUNXI_CCU_GATE(bus_tve0_clk, "bus-tve0", "ahb3",
0xbbc, BIT(1), 0);
static const char * const hdcp_parents[] = { "pll-periph0", "pll-periph1" };
static SUNXI_CCU_M_WITH_MUX_GATE(hdcp_clk, "hdcp", hdcp_parents, 0xc40,
0, 4, /* M */
24, 2, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_GATE(bus_hdcp_clk, "bus-hdcp", "ahb3", 0xc4c, BIT(0), 0);
/* Fixed factor clocks */
static CLK_FIXED_FACTOR_FW_NAME(osc12M_clk, "osc12M", "hosc", 2, 1, 0);
static const struct clk_hw *clk_parent_pll_audio[] = {
&pll_audio_hs_clk.common.hw
};
/*
* The divider of pll-audio is fixed to 24 for now, so 24576000 and 22579200
* rates can be set exactly in conjunction with sigma-delta modulation.
*/
static CLK_FIXED_FACTOR_HWS(pll_audio_1x_clk, "pll-audio-1x",
clk_parent_pll_audio,
96, 1, CLK_SET_RATE_PARENT);
static CLK_FIXED_FACTOR_HWS(pll_audio_2x_clk, "pll-audio-2x",
clk_parent_pll_audio,
48, 1, CLK_SET_RATE_PARENT);
static CLK_FIXED_FACTOR_HWS(pll_audio_4x_clk, "pll-audio-4x",
clk_parent_pll_audio,
24, 1, CLK_SET_RATE_PARENT);
static const struct clk_hw *pll_periph0_parents[] = {
&pll_periph0_clk.common.hw
};
static CLK_FIXED_FACTOR_HWS(pll_periph0_2x_clk, "pll-periph0-2x",
pll_periph0_parents,
1, 2, 0);
static const struct clk_hw *pll_periph1_parents[] = {
&pll_periph1_clk.common.hw
};
static CLK_FIXED_FACTOR_HWS(pll_periph1_2x_clk, "pll-periph1-2x",
pll_periph1_parents,
1, 2, 0);
static CLK_FIXED_FACTOR_HW(pll_video0_4x_clk, "pll-video0-4x",
&pll_video0_clk.common.hw,
1, 4, CLK_SET_RATE_PARENT);
static CLK_FIXED_FACTOR_HW(pll_video1_4x_clk, "pll-video1-4x",
&pll_video1_clk.common.hw,
1, 4, CLK_SET_RATE_PARENT);
static CLK_FIXED_FACTOR_HW(pll_video2_4x_clk, "pll-video2-4x",
&pll_video2_clk.common.hw,
1, 4, CLK_SET_RATE_PARENT);
static struct ccu_common *sun50i_h616_ccu_clks[] = {
&pll_cpux_clk.common,
&pll_ddr0_clk.common,
&pll_ddr1_clk.common,
&pll_periph0_clk.common,
&pll_periph1_clk.common,
&pll_gpu_clk.common,
&pll_video0_clk.common,
&pll_video1_clk.common,
&pll_video2_clk.common,
&pll_ve_clk.common,
&pll_de_clk.common,
&pll_audio_hs_clk.common,
&cpux_clk.common,
&axi_clk.common,
&cpux_apb_clk.common,
&psi_ahb1_ahb2_clk.common,
&ahb3_clk.common,
&apb1_clk.common,
&apb2_clk.common,
&mbus_clk.common,
&de_clk.common,
&bus_de_clk.common,
&deinterlace_clk.common,
&bus_deinterlace_clk.common,
&g2d_clk.common,
&bus_g2d_clk.common,
&gpu0_clk.common,
&bus_gpu_clk.common,
&gpu1_clk.common,
&ce_clk.common,
&bus_ce_clk.common,
&ve_clk.common,
&bus_ve_clk.common,
&bus_dma_clk.common,
&bus_hstimer_clk.common,
&avs_clk.common,
&bus_dbg_clk.common,
&bus_psi_clk.common,
&bus_pwm_clk.common,
&bus_iommu_clk.common,
&dram_clk.common,
&mbus_dma_clk.common,
&mbus_ve_clk.common,
&mbus_ce_clk.common,
&mbus_ts_clk.common,
&mbus_nand_clk.common,
&mbus_g2d_clk.common,
&bus_dram_clk.common,
&nand0_clk.common,
&nand1_clk.common,
&bus_nand_clk.common,
&mmc0_clk.common,
&mmc1_clk.common,
&mmc2_clk.common,
&bus_mmc0_clk.common,
&bus_mmc1_clk.common,
&bus_mmc2_clk.common,
&bus_uart0_clk.common,
&bus_uart1_clk.common,
&bus_uart2_clk.common,
&bus_uart3_clk.common,
&bus_uart4_clk.common,
&bus_uart5_clk.common,
&bus_i2c0_clk.common,
&bus_i2c1_clk.common,
&bus_i2c2_clk.common,
&bus_i2c3_clk.common,
&bus_i2c4_clk.common,
&spi0_clk.common,
&spi1_clk.common,
&bus_spi0_clk.common,
&bus_spi1_clk.common,
&emac_25m_clk.common,
&bus_emac0_clk.common,
&bus_emac1_clk.common,
&ts_clk.common,
&bus_ts_clk.common,
&bus_ths_clk.common,
&spdif_clk.common,
&bus_spdif_clk.common,
&dmic_clk.common,
&bus_dmic_clk.common,
&audio_codec_1x_clk.common,
&audio_codec_4x_clk.common,
&bus_audio_codec_clk.common,
&audio_hub_clk.common,
&bus_audio_hub_clk.common,
&usb_ohci0_clk.common,
&usb_phy0_clk.common,
&usb_ohci1_clk.common,
&usb_phy1_clk.common,
&usb_ohci2_clk.common,
&usb_phy2_clk.common,
&usb_ohci3_clk.common,
&usb_phy3_clk.common,
&bus_ohci0_clk.common,
&bus_ohci1_clk.common,
&bus_ohci2_clk.common,
&bus_ohci3_clk.common,
&bus_ehci0_clk.common,
&bus_ehci1_clk.common,
&bus_ehci2_clk.common,
&bus_ehci3_clk.common,
&bus_otg_clk.common,
&bus_keyadc_clk.common,
&hdmi_clk.common,
&hdmi_slow_clk.common,
&hdmi_cec_clk.common,
&bus_hdmi_clk.common,
&bus_tcon_top_clk.common,
&tcon_tv0_clk.common,
&tcon_tv1_clk.common,
&bus_tcon_tv0_clk.common,
&bus_tcon_tv1_clk.common,
&tve0_clk.common,
&bus_tve_top_clk.common,
&bus_tve0_clk.common,
&hdcp_clk.common,
&bus_hdcp_clk.common,
};
static struct clk_hw_onecell_data sun50i_h616_hw_clks = {
.hws = {
[CLK_OSC12M] = &osc12M_clk.hw,
[CLK_PLL_CPUX] = &pll_cpux_clk.common.hw,
[CLK_PLL_DDR0] = &pll_ddr0_clk.common.hw,
[CLK_PLL_DDR1] = &pll_ddr1_clk.common.hw,
[CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw,
[CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw,
[CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw,
[CLK_PLL_PERIPH1_2X] = &pll_periph1_2x_clk.hw,
[CLK_PLL_GPU] = &pll_gpu_clk.common.hw,
[CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
[CLK_PLL_VIDEO0_4X] = &pll_video0_4x_clk.hw,
[CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
[CLK_PLL_VIDEO1_4X] = &pll_video1_4x_clk.hw,
[CLK_PLL_VIDEO2] = &pll_video2_clk.common.hw,
[CLK_PLL_VIDEO2_4X] = &pll_video2_4x_clk.hw,
[CLK_PLL_VE] = &pll_ve_clk.common.hw,
[CLK_PLL_DE] = &pll_de_clk.common.hw,
[CLK_PLL_AUDIO_HS] = &pll_audio_hs_clk.common.hw,
[CLK_PLL_AUDIO_1X] = &pll_audio_1x_clk.hw,
[CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
[CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
[CLK_CPUX] = &cpux_clk.common.hw,
[CLK_AXI] = &axi_clk.common.hw,
[CLK_CPUX_APB] = &cpux_apb_clk.common.hw,
[CLK_PSI_AHB1_AHB2] = &psi_ahb1_ahb2_clk.common.hw,
[CLK_AHB3] = &ahb3_clk.common.hw,
[CLK_APB1] = &apb1_clk.common.hw,
[CLK_APB2] = &apb2_clk.common.hw,
[CLK_MBUS] = &mbus_clk.common.hw,
[CLK_DE] = &de_clk.common.hw,
[CLK_BUS_DE] = &bus_de_clk.common.hw,
[CLK_DEINTERLACE] = &deinterlace_clk.common.hw,
[CLK_BUS_DEINTERLACE] = &bus_deinterlace_clk.common.hw,
[CLK_G2D] = &g2d_clk.common.hw,
[CLK_BUS_G2D] = &bus_g2d_clk.common.hw,
[CLK_GPU0] = &gpu0_clk.common.hw,
[CLK_BUS_GPU] = &bus_gpu_clk.common.hw,
[CLK_GPU1] = &gpu1_clk.common.hw,
[CLK_CE] = &ce_clk.common.hw,
[CLK_BUS_CE] = &bus_ce_clk.common.hw,
[CLK_VE] = &ve_clk.common.hw,
[CLK_BUS_VE] = &bus_ve_clk.common.hw,
[CLK_BUS_DMA] = &bus_dma_clk.common.hw,
[CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw,
[CLK_AVS] = &avs_clk.common.hw,
[CLK_BUS_DBG] = &bus_dbg_clk.common.hw,
[CLK_BUS_PSI] = &bus_psi_clk.common.hw,
[CLK_BUS_PWM] = &bus_pwm_clk.common.hw,
[CLK_BUS_IOMMU] = &bus_iommu_clk.common.hw,
[CLK_DRAM] = &dram_clk.common.hw,
[CLK_MBUS_DMA] = &mbus_dma_clk.common.hw,
[CLK_MBUS_VE] = &mbus_ve_clk.common.hw,
[CLK_MBUS_CE] = &mbus_ce_clk.common.hw,
[CLK_MBUS_TS] = &mbus_ts_clk.common.hw,
[CLK_MBUS_NAND] = &mbus_nand_clk.common.hw,
[CLK_MBUS_G2D] = &mbus_g2d_clk.common.hw,
[CLK_BUS_DRAM] = &bus_dram_clk.common.hw,
[CLK_NAND0] = &nand0_clk.common.hw,
[CLK_NAND1] = &nand1_clk.common.hw,
[CLK_BUS_NAND] = &bus_nand_clk.common.hw,
[CLK_MMC0] = &mmc0_clk.common.hw,
[CLK_MMC1] = &mmc1_clk.common.hw,
[CLK_MMC2] = &mmc2_clk.common.hw,
[CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw,
[CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw,
[CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw,
[CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
[CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
[CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
[CLK_BUS_UART3] = &bus_uart3_clk.common.hw,
[CLK_BUS_UART4] = &bus_uart4_clk.common.hw,
[CLK_BUS_UART5] = &bus_uart5_clk.common.hw,
[CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
[CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
[CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw,
[CLK_BUS_I2C3] = &bus_i2c3_clk.common.hw,
[CLK_BUS_I2C4] = &bus_i2c4_clk.common.hw,
[CLK_SPI0] = &spi0_clk.common.hw,
[CLK_SPI1] = &spi1_clk.common.hw,
[CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
[CLK_BUS_SPI1] = &bus_spi1_clk.common.hw,
[CLK_EMAC_25M] = &emac_25m_clk.common.hw,
[CLK_BUS_EMAC0] = &bus_emac0_clk.common.hw,
[CLK_BUS_EMAC1] = &bus_emac1_clk.common.hw,
[CLK_TS] = &ts_clk.common.hw,
[CLK_BUS_TS] = &bus_ts_clk.common.hw,
[CLK_BUS_THS] = &bus_ths_clk.common.hw,
[CLK_SPDIF] = &spdif_clk.common.hw,
[CLK_BUS_SPDIF] = &bus_spdif_clk.common.hw,
[CLK_DMIC] = &dmic_clk.common.hw,
[CLK_BUS_DMIC] = &bus_dmic_clk.common.hw,
[CLK_AUDIO_CODEC_1X] = &audio_codec_1x_clk.common.hw,
[CLK_AUDIO_CODEC_4X] = &audio_codec_4x_clk.common.hw,
[CLK_BUS_AUDIO_CODEC] = &bus_audio_codec_clk.common.hw,
[CLK_AUDIO_HUB] = &audio_hub_clk.common.hw,
[CLK_BUS_AUDIO_HUB] = &bus_audio_hub_clk.common.hw,
[CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
[CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
[CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw,
[CLK_USB_PHY1] = &usb_phy1_clk.common.hw,
[CLK_USB_OHCI2] = &usb_ohci2_clk.common.hw,
[CLK_USB_PHY2] = &usb_phy2_clk.common.hw,
[CLK_USB_OHCI3] = &usb_ohci3_clk.common.hw,
[CLK_USB_PHY3] = &usb_phy3_clk.common.hw,
[CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw,
[CLK_BUS_OHCI1] = &bus_ohci1_clk.common.hw,
[CLK_BUS_OHCI2] = &bus_ohci2_clk.common.hw,
[CLK_BUS_OHCI3] = &bus_ohci3_clk.common.hw,
[CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw,
[CLK_BUS_EHCI1] = &bus_ehci1_clk.common.hw,
[CLK_BUS_EHCI2] = &bus_ehci2_clk.common.hw,
[CLK_BUS_EHCI3] = &bus_ehci3_clk.common.hw,
[CLK_BUS_OTG] = &bus_otg_clk.common.hw,
[CLK_BUS_KEYADC] = &bus_keyadc_clk.common.hw,
[CLK_HDMI] = &hdmi_clk.common.hw,
[CLK_HDMI_SLOW] = &hdmi_slow_clk.common.hw,
[CLK_HDMI_CEC] = &hdmi_cec_clk.common.hw,
[CLK_BUS_HDMI] = &bus_hdmi_clk.common.hw,
[CLK_BUS_TCON_TOP] = &bus_tcon_top_clk.common.hw,
[CLK_TCON_TV0] = &tcon_tv0_clk.common.hw,
[CLK_TCON_TV1] = &tcon_tv1_clk.common.hw,
[CLK_BUS_TCON_TV0] = &bus_tcon_tv0_clk.common.hw,
[CLK_BUS_TCON_TV1] = &bus_tcon_tv1_clk.common.hw,
[CLK_TVE0] = &tve0_clk.common.hw,
[CLK_BUS_TVE_TOP] = &bus_tve_top_clk.common.hw,
[CLK_BUS_TVE0] = &bus_tve0_clk.common.hw,
[CLK_HDCP] = &hdcp_clk.common.hw,
[CLK_BUS_HDCP] = &bus_hdcp_clk.common.hw,
},
.num = CLK_NUMBER,
};
static struct ccu_reset_map sun50i_h616_ccu_resets[] = {
[RST_MBUS] = { 0x540, BIT(30) },
[RST_BUS_DE] = { 0x60c, BIT(16) },
[RST_BUS_DEINTERLACE] = { 0x62c, BIT(16) },
[RST_BUS_GPU] = { 0x67c, BIT(16) },
[RST_BUS_CE] = { 0x68c, BIT(16) },
[RST_BUS_VE] = { 0x69c, BIT(16) },
[RST_BUS_DMA] = { 0x70c, BIT(16) },
[RST_BUS_HSTIMER] = { 0x73c, BIT(16) },
[RST_BUS_DBG] = { 0x78c, BIT(16) },
[RST_BUS_PSI] = { 0x79c, BIT(16) },
[RST_BUS_PWM] = { 0x7ac, BIT(16) },
[RST_BUS_IOMMU] = { 0x7bc, BIT(16) },
[RST_BUS_DRAM] = { 0x80c, BIT(16) },
[RST_BUS_NAND] = { 0x82c, BIT(16) },
[RST_BUS_MMC0] = { 0x84c, BIT(16) },
[RST_BUS_MMC1] = { 0x84c, BIT(17) },
[RST_BUS_MMC2] = { 0x84c, BIT(18) },
[RST_BUS_UART0] = { 0x90c, BIT(16) },
[RST_BUS_UART1] = { 0x90c, BIT(17) },
[RST_BUS_UART2] = { 0x90c, BIT(18) },
[RST_BUS_UART3] = { 0x90c, BIT(19) },
[RST_BUS_UART4] = { 0x90c, BIT(20) },
[RST_BUS_UART5] = { 0x90c, BIT(21) },
[RST_BUS_I2C0] = { 0x91c, BIT(16) },
[RST_BUS_I2C1] = { 0x91c, BIT(17) },
[RST_BUS_I2C2] = { 0x91c, BIT(18) },
[RST_BUS_I2C3] = { 0x91c, BIT(19) },
[RST_BUS_I2C4] = { 0x91c, BIT(20) },
[RST_BUS_SPI0] = { 0x96c, BIT(16) },
[RST_BUS_SPI1] = { 0x96c, BIT(17) },
[RST_BUS_EMAC0] = { 0x97c, BIT(16) },
[RST_BUS_EMAC1] = { 0x97c, BIT(17) },
[RST_BUS_TS] = { 0x9bc, BIT(16) },
[RST_BUS_THS] = { 0x9fc, BIT(16) },
[RST_BUS_SPDIF] = { 0xa2c, BIT(16) },
[RST_BUS_DMIC] = { 0xa4c, BIT(16) },
[RST_BUS_AUDIO_CODEC] = { 0xa5c, BIT(16) },
[RST_BUS_AUDIO_HUB] = { 0xa6c, BIT(16) },
[RST_USB_PHY0] = { 0xa70, BIT(30) },
[RST_USB_PHY1] = { 0xa74, BIT(30) },
[RST_USB_PHY2] = { 0xa78, BIT(30) },
[RST_USB_PHY3] = { 0xa7c, BIT(30) },
[RST_BUS_OHCI0] = { 0xa8c, BIT(16) },
[RST_BUS_OHCI1] = { 0xa8c, BIT(17) },
[RST_BUS_OHCI2] = { 0xa8c, BIT(18) },
[RST_BUS_OHCI3] = { 0xa8c, BIT(19) },
[RST_BUS_EHCI0] = { 0xa8c, BIT(20) },
[RST_BUS_EHCI1] = { 0xa8c, BIT(21) },
[RST_BUS_EHCI2] = { 0xa8c, BIT(22) },
[RST_BUS_EHCI3] = { 0xa8c, BIT(23) },
[RST_BUS_OTG] = { 0xa8c, BIT(24) },
[RST_BUS_KEYADC] = { 0xa9c, BIT(16) },
[RST_BUS_HDMI] = { 0xb1c, BIT(16) },
[RST_BUS_HDMI_SUB] = { 0xb1c, BIT(17) },
[RST_BUS_TCON_TOP] = { 0xb5c, BIT(16) },
[RST_BUS_TCON_TV0] = { 0xb9c, BIT(16) },
[RST_BUS_TCON_TV1] = { 0xb9c, BIT(17) },
[RST_BUS_TVE_TOP] = { 0xbbc, BIT(16) },
[RST_BUS_TVE0] = { 0xbbc, BIT(17) },
[RST_BUS_HDCP] = { 0xc4c, BIT(16) },
};
static const struct sunxi_ccu_desc sun50i_h616_ccu_desc = {
.ccu_clks = sun50i_h616_ccu_clks,
.num_ccu_clks = ARRAY_SIZE(sun50i_h616_ccu_clks),
.hw_clks = &sun50i_h616_hw_clks,
.resets = sun50i_h616_ccu_resets,
.num_resets = ARRAY_SIZE(sun50i_h616_ccu_resets),
};
static const u32 pll_regs[] = {
SUN50I_H616_PLL_CPUX_REG,
SUN50I_H616_PLL_DDR0_REG,
SUN50I_H616_PLL_DDR1_REG,
SUN50I_H616_PLL_PERIPH0_REG,
SUN50I_H616_PLL_PERIPH1_REG,
SUN50I_H616_PLL_GPU_REG,
SUN50I_H616_PLL_VIDEO0_REG,
SUN50I_H616_PLL_VIDEO1_REG,
SUN50I_H616_PLL_VIDEO2_REG,
SUN50I_H616_PLL_VE_REG,
SUN50I_H616_PLL_DE_REG,
SUN50I_H616_PLL_AUDIO_REG,
};
static const u32 pll_video_regs[] = {
SUN50I_H616_PLL_VIDEO0_REG,
SUN50I_H616_PLL_VIDEO1_REG,
SUN50I_H616_PLL_VIDEO2_REG,
};
static const u32 usb2_clk_regs[] = {
SUN50I_H616_USB0_CLK_REG,
SUN50I_H616_USB1_CLK_REG,
SUN50I_H616_USB2_CLK_REG,
SUN50I_H616_USB3_CLK_REG,
};
static void __init sun50i_h616_ccu_setup(struct device_node *node)
{
void __iomem *reg;
u32 val;
int i;
reg = of_io_request_and_map(node, 0, of_node_full_name(node));
if (IS_ERR(reg)) {
pr_err("%pOF: Could not map clock registers\n", node);
return;
}
/* Enable the lock bits and the output enable bits on all PLLs */
for (i = 0; i < ARRAY_SIZE(pll_regs); i++) {
val = readl(reg + pll_regs[i]);
val |= BIT(29) | BIT(27);
writel(val, reg + pll_regs[i]);
}
/*
* Force the output divider of video PLLs to 0.
*
* See the comment before pll-video0 definition for the reason.
*/
for (i = 0; i < ARRAY_SIZE(pll_video_regs); i++) {
val = readl(reg + pll_video_regs[i]);
val &= ~BIT(0);
writel(val, reg + pll_video_regs[i]);
}
/*
* Force OHCI 12M clock sources to 00 (12MHz divided from 48MHz)
*
* This clock mux is still mysterious, and the code just enforces
* it to have a valid clock parent.
*/
for (i = 0; i < ARRAY_SIZE(usb2_clk_regs); i++) {
val = readl(reg + usb2_clk_regs[i]);
val &= ~GENMASK(25, 24);
writel(val, reg + usb2_clk_regs[i]);
}
/*
* Force the post-divider of pll-audio to 12 and the output divider
* of it to 2, so 24576000 and 22579200 rates can be set exactly.
*/
val = readl(reg + SUN50I_H616_PLL_AUDIO_REG);
val &= ~(GENMASK(21, 16) | BIT(0));
writel(val | (11 << 16) | BIT(0), reg + SUN50I_H616_PLL_AUDIO_REG);
/*
* First clock parent (osc32K) is unusable for CEC. But since there
* is no good way to force parent switch (both run with same frequency),
* just set second clock parent here.
*/
val = readl(reg + SUN50I_H616_HDMI_CEC_CLK_REG);
val |= BIT(24);
writel(val, reg + SUN50I_H616_HDMI_CEC_CLK_REG);
of_sunxi_ccu_probe(node, reg, &sun50i_h616_ccu_desc);
}
CLK_OF_DECLARE(sun50i_h616_ccu, "allwinner,sun50i-h616-ccu",
sun50i_h616_ccu_setup);
Reference in a new issue View git blame Copy permalink