mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-21 08:19:28 +00:00
![Salvatore Mesoraca](/assets/img/avatar_default.png)
Disallows open of FIFOs or regular files not owned by the user in world writable sticky directories, unless the owner is the same as that of the directory or the file is opened without the O_CREAT flag. The purpose is to make data spoofing attacks harder. This protection can be turned on and off separately for FIFOs and regular files via sysctl, just like the symlinks/hardlinks protection. This patch is based on Openwall's "HARDEN_FIFO" feature by Solar Designer. This is a brief list of old vulnerabilities that could have been prevented by this feature, some of them even allow for privilege escalation: CVE-2000-1134 CVE-2007-3852 CVE-2008-0525 CVE-2009-0416 CVE-2011-4834 CVE-2015-1838 CVE-2015-7442 CVE-2016-7489 This list is not meant to be complete. It's difficult to track down all vulnerabilities of this kind because they were often reported without any mention of this particular attack vector. In fact, before hardlinks/symlinks restrictions, fifos/regular files weren't the favorite vehicle to exploit them. [s.mesoraca16@gmail.com: fix bug reported by Dan Carpenter] Link: https://lkml.kernel.org/r/20180426081456.GA7060@mwanda Link: http://lkml.kernel.org/r/1524829819-11275-1-git-send-email-s.mesoraca16@gmail.com [keescook@chromium.org: drop pr_warn_ratelimited() in favor of audit changes in the future] [keescook@chromium.org: adjust commit subjet] Link: http://lkml.kernel.org/r/20180416175918.GA13494@beast Signed-off-by: Salvatore Mesoraca <s.mesoraca16@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Suggested-by: Solar Designer <solar@openwall.com> Suggested-by: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
366 lines
14 KiB
Text
366 lines
14 KiB
Text
Documentation for /proc/sys/fs/* kernel version 2.2.10
|
|
(c) 1998, 1999, Rik van Riel <riel@nl.linux.org>
|
|
(c) 2009, Shen Feng<shen@cn.fujitsu.com>
|
|
|
|
For general info and legal blurb, please look in README.
|
|
|
|
==============================================================
|
|
|
|
This file contains documentation for the sysctl files in
|
|
/proc/sys/fs/ and is valid for Linux kernel version 2.2.
|
|
|
|
The files in this directory can be used to tune and monitor
|
|
miscellaneous and general things in the operation of the Linux
|
|
kernel. Since some of the files _can_ be used to screw up your
|
|
system, it is advisable to read both documentation and source
|
|
before actually making adjustments.
|
|
|
|
1. /proc/sys/fs
|
|
----------------------------------------------------------
|
|
|
|
Currently, these files are in /proc/sys/fs:
|
|
- aio-max-nr
|
|
- aio-nr
|
|
- dentry-state
|
|
- dquot-max
|
|
- dquot-nr
|
|
- file-max
|
|
- file-nr
|
|
- inode-max
|
|
- inode-nr
|
|
- inode-state
|
|
- nr_open
|
|
- overflowuid
|
|
- overflowgid
|
|
- pipe-user-pages-hard
|
|
- pipe-user-pages-soft
|
|
- protected_fifos
|
|
- protected_hardlinks
|
|
- protected_regular
|
|
- protected_symlinks
|
|
- suid_dumpable
|
|
- super-max
|
|
- super-nr
|
|
|
|
==============================================================
|
|
|
|
aio-nr & aio-max-nr:
|
|
|
|
aio-nr is the running total of the number of events specified on the
|
|
io_setup system call for all currently active aio contexts. If aio-nr
|
|
reaches aio-max-nr then io_setup will fail with EAGAIN. Note that
|
|
raising aio-max-nr does not result in the pre-allocation or re-sizing
|
|
of any kernel data structures.
|
|
|
|
==============================================================
|
|
|
|
dentry-state:
|
|
|
|
From linux/fs/dentry.c:
|
|
--------------------------------------------------------------
|
|
struct {
|
|
int nr_dentry;
|
|
int nr_unused;
|
|
int age_limit; /* age in seconds */
|
|
int want_pages; /* pages requested by system */
|
|
int dummy[2];
|
|
} dentry_stat = {0, 0, 45, 0,};
|
|
--------------------------------------------------------------
|
|
|
|
Dentries are dynamically allocated and deallocated, and
|
|
nr_dentry seems to be 0 all the time. Hence it's safe to
|
|
assume that only nr_unused, age_limit and want_pages are
|
|
used. Nr_unused seems to be exactly what its name says.
|
|
Age_limit is the age in seconds after which dcache entries
|
|
can be reclaimed when memory is short and want_pages is
|
|
nonzero when shrink_dcache_pages() has been called and the
|
|
dcache isn't pruned yet.
|
|
|
|
==============================================================
|
|
|
|
dquot-max & dquot-nr:
|
|
|
|
The file dquot-max shows the maximum number of cached disk
|
|
quota entries.
|
|
|
|
The file dquot-nr shows the number of allocated disk quota
|
|
entries and the number of free disk quota entries.
|
|
|
|
If the number of free cached disk quotas is very low and
|
|
you have some awesome number of simultaneous system users,
|
|
you might want to raise the limit.
|
|
|
|
==============================================================
|
|
|
|
file-max & file-nr:
|
|
|
|
The value in file-max denotes the maximum number of file-
|
|
handles that the Linux kernel will allocate. When you get lots
|
|
of error messages about running out of file handles, you might
|
|
want to increase this limit.
|
|
|
|
Historically,the kernel was able to allocate file handles
|
|
dynamically, but not to free them again. The three values in
|
|
file-nr denote the number of allocated file handles, the number
|
|
of allocated but unused file handles, and the maximum number of
|
|
file handles. Linux 2.6 always reports 0 as the number of free
|
|
file handles -- this is not an error, it just means that the
|
|
number of allocated file handles exactly matches the number of
|
|
used file handles.
|
|
|
|
Attempts to allocate more file descriptors than file-max are
|
|
reported with printk, look for "VFS: file-max limit <number>
|
|
reached".
|
|
==============================================================
|
|
|
|
nr_open:
|
|
|
|
This denotes the maximum number of file-handles a process can
|
|
allocate. Default value is 1024*1024 (1048576) which should be
|
|
enough for most machines. Actual limit depends on RLIMIT_NOFILE
|
|
resource limit.
|
|
|
|
==============================================================
|
|
|
|
inode-max, inode-nr & inode-state:
|
|
|
|
As with file handles, the kernel allocates the inode structures
|
|
dynamically, but can't free them yet.
|
|
|
|
The value in inode-max denotes the maximum number of inode
|
|
handlers. This value should be 3-4 times larger than the value
|
|
in file-max, since stdin, stdout and network sockets also
|
|
need an inode struct to handle them. When you regularly run
|
|
out of inodes, you need to increase this value.
|
|
|
|
The file inode-nr contains the first two items from
|
|
inode-state, so we'll skip to that file...
|
|
|
|
Inode-state contains three actual numbers and four dummies.
|
|
The actual numbers are, in order of appearance, nr_inodes,
|
|
nr_free_inodes and preshrink.
|
|
|
|
Nr_inodes stands for the number of inodes the system has
|
|
allocated, this can be slightly more than inode-max because
|
|
Linux allocates them one pageful at a time.
|
|
|
|
Nr_free_inodes represents the number of free inodes (?) and
|
|
preshrink is nonzero when the nr_inodes > inode-max and the
|
|
system needs to prune the inode list instead of allocating
|
|
more.
|
|
|
|
==============================================================
|
|
|
|
overflowgid & overflowuid:
|
|
|
|
Some filesystems only support 16-bit UIDs and GIDs, although in Linux
|
|
UIDs and GIDs are 32 bits. When one of these filesystems is mounted
|
|
with writes enabled, any UID or GID that would exceed 65535 is translated
|
|
to a fixed value before being written to disk.
|
|
|
|
These sysctls allow you to change the value of the fixed UID and GID.
|
|
The default is 65534.
|
|
|
|
==============================================================
|
|
|
|
pipe-user-pages-hard:
|
|
|
|
Maximum total number of pages a non-privileged user may allocate for pipes.
|
|
Once this limit is reached, no new pipes may be allocated until usage goes
|
|
below the limit again. When set to 0, no limit is applied, which is the default
|
|
setting.
|
|
|
|
==============================================================
|
|
|
|
pipe-user-pages-soft:
|
|
|
|
Maximum total number of pages a non-privileged user may allocate for pipes
|
|
before the pipe size gets limited to a single page. Once this limit is reached,
|
|
new pipes will be limited to a single page in size for this user in order to
|
|
limit total memory usage, and trying to increase them using fcntl() will be
|
|
denied until usage goes below the limit again. The default value allows to
|
|
allocate up to 1024 pipes at their default size. When set to 0, no limit is
|
|
applied.
|
|
|
|
==============================================================
|
|
|
|
protected_fifos:
|
|
|
|
The intent of this protection is to avoid unintentional writes to
|
|
an attacker-controlled FIFO, where a program expected to create a regular
|
|
file.
|
|
|
|
When set to "0", writing to FIFOs is unrestricted.
|
|
|
|
When set to "1" don't allow O_CREAT open on FIFOs that we don't own
|
|
in world writable sticky directories, unless they are owned by the
|
|
owner of the directory.
|
|
|
|
When set to "2" it also applies to group writable sticky directories.
|
|
|
|
This protection is based on the restrictions in Openwall.
|
|
|
|
==============================================================
|
|
|
|
protected_hardlinks:
|
|
|
|
A long-standing class of security issues is the hardlink-based
|
|
time-of-check-time-of-use race, most commonly seen in world-writable
|
|
directories like /tmp. The common method of exploitation of this flaw
|
|
is to cross privilege boundaries when following a given hardlink (i.e. a
|
|
root process follows a hardlink created by another user). Additionally,
|
|
on systems without separated partitions, this stops unauthorized users
|
|
from "pinning" vulnerable setuid/setgid files against being upgraded by
|
|
the administrator, or linking to special files.
|
|
|
|
When set to "0", hardlink creation behavior is unrestricted.
|
|
|
|
When set to "1" hardlinks cannot be created by users if they do not
|
|
already own the source file, or do not have read/write access to it.
|
|
|
|
This protection is based on the restrictions in Openwall and grsecurity.
|
|
|
|
==============================================================
|
|
|
|
protected_regular:
|
|
|
|
This protection is similar to protected_fifos, but it
|
|
avoids writes to an attacker-controlled regular file, where a program
|
|
expected to create one.
|
|
|
|
When set to "0", writing to regular files is unrestricted.
|
|
|
|
When set to "1" don't allow O_CREAT open on regular files that we
|
|
don't own in world writable sticky directories, unless they are
|
|
owned by the owner of the directory.
|
|
|
|
When set to "2" it also applies to group writable sticky directories.
|
|
|
|
==============================================================
|
|
|
|
protected_symlinks:
|
|
|
|
A long-standing class of security issues is the symlink-based
|
|
time-of-check-time-of-use race, most commonly seen in world-writable
|
|
directories like /tmp. The common method of exploitation of this flaw
|
|
is to cross privilege boundaries when following a given symlink (i.e. a
|
|
root process follows a symlink belonging to another user). For a likely
|
|
incomplete list of hundreds of examples across the years, please see:
|
|
http://cve.mitre.org/cgi-bin/cvekey.cgi?keyword=/tmp
|
|
|
|
When set to "0", symlink following behavior is unrestricted.
|
|
|
|
When set to "1" symlinks are permitted to be followed only when outside
|
|
a sticky world-writable directory, or when the uid of the symlink and
|
|
follower match, or when the directory owner matches the symlink's owner.
|
|
|
|
This protection is based on the restrictions in Openwall and grsecurity.
|
|
|
|
==============================================================
|
|
|
|
suid_dumpable:
|
|
|
|
This value can be used to query and set the core dump mode for setuid
|
|
or otherwise protected/tainted binaries. The modes are
|
|
|
|
0 - (default) - traditional behaviour. Any process which has changed
|
|
privilege levels or is execute only will not be dumped.
|
|
1 - (debug) - all processes dump core when possible. The core dump is
|
|
owned by the current user and no security is applied. This is
|
|
intended for system debugging situations only. Ptrace is unchecked.
|
|
This is insecure as it allows regular users to examine the memory
|
|
contents of privileged processes.
|
|
2 - (suidsafe) - any binary which normally would not be dumped is dumped
|
|
anyway, but only if the "core_pattern" kernel sysctl is set to
|
|
either a pipe handler or a fully qualified path. (For more details
|
|
on this limitation, see CVE-2006-2451.) This mode is appropriate
|
|
when administrators are attempting to debug problems in a normal
|
|
environment, and either have a core dump pipe handler that knows
|
|
to treat privileged core dumps with care, or specific directory
|
|
defined for catching core dumps. If a core dump happens without
|
|
a pipe handler or fully qualifid path, a message will be emitted
|
|
to syslog warning about the lack of a correct setting.
|
|
|
|
==============================================================
|
|
|
|
super-max & super-nr:
|
|
|
|
These numbers control the maximum number of superblocks, and
|
|
thus the maximum number of mounted filesystems the kernel
|
|
can have. You only need to increase super-max if you need to
|
|
mount more filesystems than the current value in super-max
|
|
allows you to.
|
|
|
|
==============================================================
|
|
|
|
aio-nr & aio-max-nr:
|
|
|
|
aio-nr shows the current system-wide number of asynchronous io
|
|
requests. aio-max-nr allows you to change the maximum value
|
|
aio-nr can grow to.
|
|
|
|
==============================================================
|
|
|
|
mount-max:
|
|
|
|
This denotes the maximum number of mounts that may exist
|
|
in a mount namespace.
|
|
|
|
==============================================================
|
|
|
|
|
|
2. /proc/sys/fs/binfmt_misc
|
|
----------------------------------------------------------
|
|
|
|
Documentation for the files in /proc/sys/fs/binfmt_misc is
|
|
in Documentation/admin-guide/binfmt-misc.rst.
|
|
|
|
|
|
3. /proc/sys/fs/mqueue - POSIX message queues filesystem
|
|
----------------------------------------------------------
|
|
|
|
The "mqueue" filesystem provides the necessary kernel features to enable the
|
|
creation of a user space library that implements the POSIX message queues
|
|
API (as noted by the MSG tag in the POSIX 1003.1-2001 version of the System
|
|
Interfaces specification.)
|
|
|
|
The "mqueue" filesystem contains values for determining/setting the amount of
|
|
resources used by the file system.
|
|
|
|
/proc/sys/fs/mqueue/queues_max is a read/write file for setting/getting the
|
|
maximum number of message queues allowed on the system.
|
|
|
|
/proc/sys/fs/mqueue/msg_max is a read/write file for setting/getting the
|
|
maximum number of messages in a queue value. In fact it is the limiting value
|
|
for another (user) limit which is set in mq_open invocation. This attribute of
|
|
a queue must be less or equal then msg_max.
|
|
|
|
/proc/sys/fs/mqueue/msgsize_max is a read/write file for setting/getting the
|
|
maximum message size value (it is every message queue's attribute set during
|
|
its creation).
|
|
|
|
/proc/sys/fs/mqueue/msg_default is a read/write file for setting/getting the
|
|
default number of messages in a queue value if attr parameter of mq_open(2) is
|
|
NULL. If it exceed msg_max, the default value is initialized msg_max.
|
|
|
|
/proc/sys/fs/mqueue/msgsize_default is a read/write file for setting/getting
|
|
the default message size value if attr parameter of mq_open(2) is NULL. If it
|
|
exceed msgsize_max, the default value is initialized msgsize_max.
|
|
|
|
4. /proc/sys/fs/epoll - Configuration options for the epoll interface
|
|
--------------------------------------------------------
|
|
|
|
This directory contains configuration options for the epoll(7) interface.
|
|
|
|
max_user_watches
|
|
----------------
|
|
|
|
Every epoll file descriptor can store a number of files to be monitored
|
|
for event readiness. Each one of these monitored files constitutes a "watch".
|
|
This configuration option sets the maximum number of "watches" that are
|
|
allowed for each user.
|
|
Each "watch" costs roughly 90 bytes on a 32bit kernel, and roughly 160 bytes
|
|
on a 64bit one.
|
|
The current default value for max_user_watches is the 1/32 of the available
|
|
low memory, divided for the "watch" cost in bytes.
|
|
|