mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 17:30:02 +00:00
![]() Fixes a sequencing bug in spi driver pxa2xx_spi.c in which the chip select for a transfer may be asserted before the clock polarity is set on the interface. As a result of this bug, the clock signal may have the wrong polarity at transfer start, so it may need to make an extra half transition before the intended clock/data signals begin. (This probably means all transfers are one bit out of sequence.) This only occurs on the first transfer following a change in clock polarity in systems using more than one more than one such polarity. The fix assures that the clock mode is properly set before asserting chip select. This bug was introduced in a patch merged on 2006/12/10, kernel 2.6.20. The patch defines an additional bit in: include/asm-arm/arch-pxa/regs-ssp.h for 2.6.25 and newer kernels but this addition must be made in: include/asm-arm/arch-pxa/pxa-regs.h for kernels between 2.6.20 and 2.6.24, inclusive Signed-off-by: Ned Forrester <nforrester@whoi.edu> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
---|---|---|
.. | ||
at25.c | ||
atmel_spi.c | ||
atmel_spi.h | ||
au1550_spi.c | ||
Kconfig | ||
Makefile | ||
mpc52xx_psc_spi.c | ||
omap2_mcspi.c | ||
omap_uwire.c | ||
pxa2xx_spi.c | ||
spi.c | ||
spi_bfin5xx.c | ||
spi_bitbang.c | ||
spi_butterfly.c | ||
spi_imx.c | ||
spi_lm70llp.c | ||
spi_mpc83xx.c | ||
spi_s3c24xx.c | ||
spi_s3c24xx_gpio.c | ||
spi_sh_sci.c | ||
spi_txx9.c | ||
spidev.c | ||
tle62x0.c | ||
xilinx_spi.c |