linux-stable/drivers/mtd/nand
Masahiro Yamada 3f6e698604 mtd: rawnand: denali_dt: set clk_x_rate to 200 MHz unconditionally
Since commit 1bb8866677 ("mtd: nand: denali: handle timing parameters
by setup_data_interface()"), denali_dt.c gets the clock rate from the
clock driver.  The driver expects the frequency of the bus interface
clock, whereas the clock driver of SOCFPGA provides the core clock.
Thus, the setup_data_interface() hook calculates timing parameters
based on a wrong frequency.

To make it work without relying on the clock driver, hard-code the clock
frequency, 200MHz.  This is fine for existing DT of UniPhier, and also
fixes the issue of SOCFPGA because both platforms use 200 MHz for the
bus interface clock.

Fixes: 1bb8866677 ("mtd: nand: denali: handle timing parameters by setup_data_interface()")
Cc: linux-stable <stable@vger.kernel.org> #4.14+
Reported-by: Philipp Rosenberger <p.rosenberger@linutronix.de>
Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-06-22 18:47:56 +02:00
..
onenand treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
raw mtd: rawnand: denali_dt: set clk_x_rate to 200 MHz unconditionally 2018-06-22 18:47:56 +02:00
bbt.c mtd: nand: Add core infrastructure to deal with NAND devices 2018-02-16 10:10:53 +01:00
core.c mtd: nand: Fix nanddev_mtd_erase() 2018-04-22 19:59:29 +02:00
Kconfig mtd: Move onenand code base to drivers/mtd/nand/onenand 2018-03-15 15:40:37 +01:00
Makefile mtd: Move onenand code base to drivers/mtd/nand/onenand 2018-03-15 15:40:37 +01:00