mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-27 11:19:37 +00:00
![Greg Kroah-Hartman](/assets/img/avatar_default.png)
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
716 lines
32 KiB
C
716 lines
32 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
#ifndef LINUX_BCMA_DRIVER_CC_H_
|
|
#define LINUX_BCMA_DRIVER_CC_H_
|
|
|
|
#include <linux/platform_device.h>
|
|
#include <linux/gpio.h>
|
|
|
|
/** ChipCommon core registers. **/
|
|
#define BCMA_CC_ID 0x0000
|
|
#define BCMA_CC_ID_ID 0x0000FFFF
|
|
#define BCMA_CC_ID_ID_SHIFT 0
|
|
#define BCMA_CC_ID_REV 0x000F0000
|
|
#define BCMA_CC_ID_REV_SHIFT 16
|
|
#define BCMA_CC_ID_PKG 0x00F00000
|
|
#define BCMA_CC_ID_PKG_SHIFT 20
|
|
#define BCMA_CC_ID_NRCORES 0x0F000000
|
|
#define BCMA_CC_ID_NRCORES_SHIFT 24
|
|
#define BCMA_CC_ID_TYPE 0xF0000000
|
|
#define BCMA_CC_ID_TYPE_SHIFT 28
|
|
#define BCMA_CC_CAP 0x0004 /* Capabilities */
|
|
#define BCMA_CC_CAP_NRUART 0x00000003 /* # of UARTs */
|
|
#define BCMA_CC_CAP_MIPSEB 0x00000004 /* MIPS in BigEndian Mode */
|
|
#define BCMA_CC_CAP_UARTCLK 0x00000018 /* UART clock select */
|
|
#define BCMA_CC_CAP_UARTCLK_INT 0x00000008 /* UARTs are driven by internal divided clock */
|
|
#define BCMA_CC_CAP_UARTGPIO 0x00000020 /* UARTs on GPIO 15-12 */
|
|
#define BCMA_CC_CAP_EXTBUS 0x000000C0 /* External buses present */
|
|
#define BCMA_CC_CAP_FLASHT 0x00000700 /* Flash Type */
|
|
#define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */
|
|
#define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */
|
|
#define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */
|
|
#define BCMA_CC_FLASHT_NAND 0x00000300 /* NAND flash */
|
|
#define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */
|
|
#define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */
|
|
#define BCMA_PLLTYPE_NONE 0x00000000
|
|
#define BCMA_PLLTYPE_1 0x00010000 /* 48Mhz base, 3 dividers */
|
|
#define BCMA_PLLTYPE_2 0x00020000 /* 48Mhz, 4 dividers */
|
|
#define BCMA_PLLTYPE_3 0x00030000 /* 25Mhz, 2 dividers */
|
|
#define BCMA_PLLTYPE_4 0x00008000 /* 48Mhz, 4 dividers */
|
|
#define BCMA_PLLTYPE_5 0x00018000 /* 25Mhz, 4 dividers */
|
|
#define BCMA_PLLTYPE_6 0x00028000 /* 100/200 or 120/240 only */
|
|
#define BCMA_PLLTYPE_7 0x00038000 /* 25Mhz, 4 dividers */
|
|
#define BCMA_CC_CAP_PCTL 0x00040000 /* Power Control */
|
|
#define BCMA_CC_CAP_OTPS 0x00380000 /* OTP size */
|
|
#define BCMA_CC_CAP_OTPS_SHIFT 19
|
|
#define BCMA_CC_CAP_OTPS_BASE 5
|
|
#define BCMA_CC_CAP_JTAGM 0x00400000 /* JTAG master present */
|
|
#define BCMA_CC_CAP_BROM 0x00800000 /* Internal boot ROM active */
|
|
#define BCMA_CC_CAP_64BIT 0x08000000 /* 64-bit Backplane */
|
|
#define BCMA_CC_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */
|
|
#define BCMA_CC_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */
|
|
#define BCMA_CC_CAP_SPROM 0x40000000 /* SPROM present */
|
|
#define BCMA_CC_CAP_NFLASH 0x80000000 /* NAND flash present (rev >= 35 or BCM4706?) */
|
|
#define BCMA_CC_CORECTL 0x0008
|
|
#define BCMA_CC_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */
|
|
#define BCMA_CC_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */
|
|
#define BCMA_CC_CORECTL_UARTCLKEN 0x00000008 /* UART clock enable (rev >= 21) */
|
|
#define BCMA_CC_BIST 0x000C
|
|
#define BCMA_CC_OTPS 0x0010 /* OTP status */
|
|
#define BCMA_CC_OTPS_PROGFAIL 0x80000000
|
|
#define BCMA_CC_OTPS_PROTECT 0x00000007
|
|
#define BCMA_CC_OTPS_HW_PROTECT 0x00000001
|
|
#define BCMA_CC_OTPS_SW_PROTECT 0x00000002
|
|
#define BCMA_CC_OTPS_CID_PROTECT 0x00000004
|
|
#define BCMA_CC_OTPS_GU_PROG_IND 0x00000F00 /* General Use programmed indication */
|
|
#define BCMA_CC_OTPS_GU_PROG_IND_SHIFT 8
|
|
#define BCMA_CC_OTPS_GU_PROG_HW 0x00000100 /* HW region programmed */
|
|
#define BCMA_CC_OTPC 0x0014 /* OTP control */
|
|
#define BCMA_CC_OTPC_RECWAIT 0xFF000000
|
|
#define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00
|
|
#define BCMA_CC_OTPC_PRW_SHIFT 8
|
|
#define BCMA_CC_OTPC_MAXFAIL 0x00000038
|
|
#define BCMA_CC_OTPC_VSEL 0x00000006
|
|
#define BCMA_CC_OTPC_SELVL 0x00000001
|
|
#define BCMA_CC_OTPP 0x0018 /* OTP prog */
|
|
#define BCMA_CC_OTPP_COL 0x000000FF
|
|
#define BCMA_CC_OTPP_ROW 0x0000FF00
|
|
#define BCMA_CC_OTPP_ROW_SHIFT 8
|
|
#define BCMA_CC_OTPP_READERR 0x10000000
|
|
#define BCMA_CC_OTPP_VALUE 0x20000000
|
|
#define BCMA_CC_OTPP_READ 0x40000000
|
|
#define BCMA_CC_OTPP_START 0x80000000
|
|
#define BCMA_CC_OTPP_BUSY 0x80000000
|
|
#define BCMA_CC_OTPL 0x001C /* OTP layout */
|
|
#define BCMA_CC_OTPL_GURGN_OFFSET 0x00000FFF /* offset of general use region */
|
|
#define BCMA_CC_IRQSTAT 0x0020
|
|
#define BCMA_CC_IRQMASK 0x0024
|
|
#define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */
|
|
#define BCMA_CC_IRQ_EXT 0x00000002 /* ro: ext intr pin (corerev >= 3) */
|
|
#define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */
|
|
#define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */
|
|
#define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */
|
|
#define BCMA_CC_CHIPST_4313_SPROM_PRESENT 1
|
|
#define BCMA_CC_CHIPST_4313_OTP_PRESENT 2
|
|
#define BCMA_CC_CHIPST_4331_SPROM_PRESENT 2
|
|
#define BCMA_CC_CHIPST_4331_OTP_PRESENT 4
|
|
#define BCMA_CC_CHIPST_43228_ILP_DIV_EN 0x00000001
|
|
#define BCMA_CC_CHIPST_43228_OTP_PRESENT 0x00000002
|
|
#define BCMA_CC_CHIPST_43228_SERDES_REFCLK_PADSEL 0x00000004
|
|
#define BCMA_CC_CHIPST_43228_SDIO_MODE 0x00000008
|
|
#define BCMA_CC_CHIPST_43228_SDIO_OTP_PRESENT 0x00000010
|
|
#define BCMA_CC_CHIPST_43228_SDIO_RESET 0x00000020
|
|
#define BCMA_CC_CHIPST_4706_PKG_OPTION BIT(0) /* 0: full-featured package 1: low-cost package */
|
|
#define BCMA_CC_CHIPST_4706_SFLASH_PRESENT BIT(1) /* 0: parallel, 1: serial flash is present */
|
|
#define BCMA_CC_CHIPST_4706_SFLASH_TYPE BIT(2) /* 0: 8b-p/ST-s flash, 1: 16b-p/Atmal-s flash */
|
|
#define BCMA_CC_CHIPST_4706_MIPS_BENDIAN BIT(3) /* 0: little, 1: big endian */
|
|
#define BCMA_CC_CHIPST_4706_PCIE1_DISABLE BIT(5) /* PCIE1 enable strap pin */
|
|
#define BCMA_CC_CHIPST_5357_NAND_BOOT BIT(4) /* NAND boot, valid for CC rev 38 and/or BCM5357 */
|
|
#define BCMA_CC_CHIPST_4360_XTAL_40MZ 0x00000001
|
|
#define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */
|
|
#define BCMA_CC_JCMD_START 0x80000000
|
|
#define BCMA_CC_JCMD_BUSY 0x80000000
|
|
#define BCMA_CC_JCMD_PAUSE 0x40000000
|
|
#define BCMA_CC_JCMD0_ACC_MASK 0x0000F000
|
|
#define BCMA_CC_JCMD0_ACC_IRDR 0x00000000
|
|
#define BCMA_CC_JCMD0_ACC_DR 0x00001000
|
|
#define BCMA_CC_JCMD0_ACC_IR 0x00002000
|
|
#define BCMA_CC_JCMD0_ACC_RESET 0x00003000
|
|
#define BCMA_CC_JCMD0_ACC_IRPDR 0x00004000
|
|
#define BCMA_CC_JCMD0_ACC_PDR 0x00005000
|
|
#define BCMA_CC_JCMD0_IRW_MASK 0x00000F00
|
|
#define BCMA_CC_JCMD_ACC_MASK 0x000F0000 /* Changes for corerev 11 */
|
|
#define BCMA_CC_JCMD_ACC_IRDR 0x00000000
|
|
#define BCMA_CC_JCMD_ACC_DR 0x00010000
|
|
#define BCMA_CC_JCMD_ACC_IR 0x00020000
|
|
#define BCMA_CC_JCMD_ACC_RESET 0x00030000
|
|
#define BCMA_CC_JCMD_ACC_IRPDR 0x00040000
|
|
#define BCMA_CC_JCMD_ACC_PDR 0x00050000
|
|
#define BCMA_CC_JCMD_IRW_MASK 0x00001F00
|
|
#define BCMA_CC_JCMD_IRW_SHIFT 8
|
|
#define BCMA_CC_JCMD_DRW_MASK 0x0000003F
|
|
#define BCMA_CC_JIR 0x0034 /* Rev >= 10 only */
|
|
#define BCMA_CC_JDR 0x0038 /* Rev >= 10 only */
|
|
#define BCMA_CC_JCTL 0x003C /* Rev >= 10 only */
|
|
#define BCMA_CC_JCTL_FORCE_CLK 4 /* Force clock */
|
|
#define BCMA_CC_JCTL_EXT_EN 2 /* Enable external targets */
|
|
#define BCMA_CC_JCTL_EN 1 /* Enable Jtag master */
|
|
#define BCMA_CC_FLASHCTL 0x0040
|
|
/* Start/busy bit in flashcontrol */
|
|
#define BCMA_CC_FLASHCTL_OPCODE 0x000000ff
|
|
#define BCMA_CC_FLASHCTL_ACTION 0x00000700
|
|
#define BCMA_CC_FLASHCTL_CS_ACTIVE 0x00001000 /* Chip Select Active, rev >= 20 */
|
|
#define BCMA_CC_FLASHCTL_START 0x80000000
|
|
#define BCMA_CC_FLASHCTL_BUSY BCMA_CC_FLASHCTL_START
|
|
/* Flashcontrol action + opcodes for ST flashes */
|
|
#define BCMA_CC_FLASHCTL_ST_WREN 0x0006 /* Write Enable */
|
|
#define BCMA_CC_FLASHCTL_ST_WRDIS 0x0004 /* Write Disable */
|
|
#define BCMA_CC_FLASHCTL_ST_RDSR 0x0105 /* Read Status Register */
|
|
#define BCMA_CC_FLASHCTL_ST_WRSR 0x0101 /* Write Status Register */
|
|
#define BCMA_CC_FLASHCTL_ST_READ 0x0303 /* Read Data Bytes */
|
|
#define BCMA_CC_FLASHCTL_ST_PP 0x0302 /* Page Program */
|
|
#define BCMA_CC_FLASHCTL_ST_SE 0x02d8 /* Sector Erase */
|
|
#define BCMA_CC_FLASHCTL_ST_BE 0x00c7 /* Bulk Erase */
|
|
#define BCMA_CC_FLASHCTL_ST_DP 0x00b9 /* Deep Power-down */
|
|
#define BCMA_CC_FLASHCTL_ST_RES 0x03ab /* Read Electronic Signature */
|
|
#define BCMA_CC_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */
|
|
#define BCMA_CC_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase */
|
|
/* Flashcontrol action + opcodes for Atmel flashes */
|
|
#define BCMA_CC_FLASHCTL_AT_READ 0x07e8
|
|
#define BCMA_CC_FLASHCTL_AT_PAGE_READ 0x07d2
|
|
#define BCMA_CC_FLASHCTL_AT_STATUS 0x01d7
|
|
#define BCMA_CC_FLASHCTL_AT_BUF1_WRITE 0x0384
|
|
#define BCMA_CC_FLASHCTL_AT_BUF2_WRITE 0x0387
|
|
#define BCMA_CC_FLASHCTL_AT_BUF1_ERASE_PROGRAM 0x0283
|
|
#define BCMA_CC_FLASHCTL_AT_BUF2_ERASE_PROGRAM 0x0286
|
|
#define BCMA_CC_FLASHCTL_AT_BUF1_PROGRAM 0x0288
|
|
#define BCMA_CC_FLASHCTL_AT_BUF2_PROGRAM 0x0289
|
|
#define BCMA_CC_FLASHCTL_AT_PAGE_ERASE 0x0281
|
|
#define BCMA_CC_FLASHCTL_AT_BLOCK_ERASE 0x0250
|
|
#define BCMA_CC_FLASHCTL_AT_BUF1_WRITE_ERASE_PROGRAM 0x0382
|
|
#define BCMA_CC_FLASHCTL_AT_BUF2_WRITE_ERASE_PROGRAM 0x0385
|
|
#define BCMA_CC_FLASHCTL_AT_BUF1_LOAD 0x0253
|
|
#define BCMA_CC_FLASHCTL_AT_BUF2_LOAD 0x0255
|
|
#define BCMA_CC_FLASHCTL_AT_BUF1_COMPARE 0x0260
|
|
#define BCMA_CC_FLASHCTL_AT_BUF2_COMPARE 0x0261
|
|
#define BCMA_CC_FLASHCTL_AT_BUF1_REPROGRAM 0x0258
|
|
#define BCMA_CC_FLASHCTL_AT_BUF2_REPROGRAM 0x0259
|
|
#define BCMA_CC_FLASHADDR 0x0044
|
|
#define BCMA_CC_FLASHDATA 0x0048
|
|
/* Status register bits for ST flashes */
|
|
#define BCMA_CC_FLASHDATA_ST_WIP 0x01 /* Write In Progress */
|
|
#define BCMA_CC_FLASHDATA_ST_WEL 0x02 /* Write Enable Latch */
|
|
#define BCMA_CC_FLASHDATA_ST_BP_MASK 0x1c /* Block Protect */
|
|
#define BCMA_CC_FLASHDATA_ST_BP_SHIFT 2
|
|
#define BCMA_CC_FLASHDATA_ST_SRWD 0x80 /* Status Register Write Disable */
|
|
/* Status register bits for Atmel flashes */
|
|
#define BCMA_CC_FLASHDATA_AT_READY 0x80
|
|
#define BCMA_CC_FLASHDATA_AT_MISMATCH 0x40
|
|
#define BCMA_CC_FLASHDATA_AT_ID_MASK 0x38
|
|
#define BCMA_CC_FLASHDATA_AT_ID_SHIFT 3
|
|
#define BCMA_CC_BCAST_ADDR 0x0050
|
|
#define BCMA_CC_BCAST_DATA 0x0054
|
|
#define BCMA_CC_GPIOPULLUP 0x0058 /* Rev >= 20 only */
|
|
#define BCMA_CC_GPIOPULLDOWN 0x005C /* Rev >= 20 only */
|
|
#define BCMA_CC_GPIOIN 0x0060
|
|
#define BCMA_CC_GPIOOUT 0x0064
|
|
#define BCMA_CC_GPIOOUTEN 0x0068
|
|
#define BCMA_CC_GPIOCTL 0x006C
|
|
#define BCMA_CC_GPIOPOL 0x0070
|
|
#define BCMA_CC_GPIOIRQ 0x0074
|
|
#define BCMA_CC_WATCHDOG 0x0080
|
|
#define BCMA_CC_GPIOTIMER 0x0088 /* LED powersave (corerev >= 16) */
|
|
#define BCMA_CC_GPIOTIMER_OFFTIME 0x0000FFFF
|
|
#define BCMA_CC_GPIOTIMER_OFFTIME_SHIFT 0
|
|
#define BCMA_CC_GPIOTIMER_ONTIME 0xFFFF0000
|
|
#define BCMA_CC_GPIOTIMER_ONTIME_SHIFT 16
|
|
#define BCMA_CC_GPIOTOUTM 0x008C /* LED powersave (corerev >= 16) */
|
|
#define BCMA_CC_CLOCK_N 0x0090
|
|
#define BCMA_CC_CLOCK_SB 0x0094
|
|
#define BCMA_CC_CLOCK_PCI 0x0098
|
|
#define BCMA_CC_CLOCK_M2 0x009C
|
|
#define BCMA_CC_CLOCK_MIPS 0x00A0
|
|
#define BCMA_CC_CLKDIV 0x00A4 /* Rev >= 3 only */
|
|
#define BCMA_CC_CLKDIV_SFLASH 0x0F000000
|
|
#define BCMA_CC_CLKDIV_SFLASH_SHIFT 24
|
|
#define BCMA_CC_CLKDIV_OTP 0x000F0000
|
|
#define BCMA_CC_CLKDIV_OTP_SHIFT 16
|
|
#define BCMA_CC_CLKDIV_JTAG 0x00000F00
|
|
#define BCMA_CC_CLKDIV_JTAG_SHIFT 8
|
|
#define BCMA_CC_CLKDIV_UART 0x000000FF
|
|
#define BCMA_CC_CAP_EXT 0x00AC /* Capabilities */
|
|
#define BCMA_CC_CAP_EXT_SECI_PRESENT 0x00000001
|
|
#define BCMA_CC_CAP_EXT_GSIO_PRESENT 0x00000002
|
|
#define BCMA_CC_CAP_EXT_GCI_PRESENT 0x00000004
|
|
#define BCMA_CC_CAP_EXT_SECI_PUART_PRESENT 0x00000008 /* UART present */
|
|
#define BCMA_CC_CAP_EXT_AOB_PRESENT 0x00000040
|
|
#define BCMA_CC_PLLONDELAY 0x00B0 /* Rev >= 4 only */
|
|
#define BCMA_CC_FREFSELDELAY 0x00B4 /* Rev >= 4 only */
|
|
#define BCMA_CC_SLOWCLKCTL 0x00B8 /* 6 <= Rev <= 9 only */
|
|
#define BCMA_CC_SLOWCLKCTL_SRC 0x00000007 /* slow clock source mask */
|
|
#define BCMA_CC_SLOWCLKCTL_SRC_LPO 0x00000000 /* source of slow clock is LPO */
|
|
#define BCMA_CC_SLOWCLKCTL_SRC_XTAL 0x00000001 /* source of slow clock is crystal */
|
|
#define BCMA_CC_SLOECLKCTL_SRC_PCI 0x00000002 /* source of slow clock is PCI */
|
|
#define BCMA_CC_SLOWCLKCTL_LPOFREQ 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */
|
|
#define BCMA_CC_SLOWCLKCTL_LPOPD 0x00000400 /* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */
|
|
#define BCMA_CC_SLOWCLKCTL_FSLOW 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */
|
|
#define BCMA_CC_SLOWCLKCTL_IPLL 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */
|
|
#define BCMA_CC_SLOWCLKCTL_ENXTAL 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */
|
|
#define BCMA_CC_SLOWCLKCTL_XTALPU 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */
|
|
#define BCMA_CC_SLOWCLKCTL_CLKDIV 0xFFFF0000 /* ClockDivider (SlowClk = 1/(4+divisor)) */
|
|
#define BCMA_CC_SLOWCLKCTL_CLKDIV_SHIFT 16
|
|
#define BCMA_CC_SYSCLKCTL 0x00C0 /* Rev >= 3 only */
|
|
#define BCMA_CC_SYSCLKCTL_IDLPEN 0x00000001 /* ILPen: Enable Idle Low Power */
|
|
#define BCMA_CC_SYSCLKCTL_ALPEN 0x00000002 /* ALPen: Enable Active Low Power */
|
|
#define BCMA_CC_SYSCLKCTL_PLLEN 0x00000004 /* ForcePLLOn */
|
|
#define BCMA_CC_SYSCLKCTL_FORCEALP 0x00000008 /* Force ALP (or HT if ALPen is not set */
|
|
#define BCMA_CC_SYSCLKCTL_FORCEHT 0x00000010 /* Force HT */
|
|
#define BCMA_CC_SYSCLKCTL_CLKDIV 0xFFFF0000 /* ClkDiv (ILP = 1/(4+divisor)) */
|
|
#define BCMA_CC_SYSCLKCTL_CLKDIV_SHIFT 16
|
|
#define BCMA_CC_CLKSTSTR 0x00C4 /* Rev >= 3 only */
|
|
#define BCMA_CC_EROM 0x00FC
|
|
#define BCMA_CC_PCMCIA_CFG 0x0100
|
|
#define BCMA_CC_PCMCIA_MEMWAIT 0x0104
|
|
#define BCMA_CC_PCMCIA_ATTRWAIT 0x0108
|
|
#define BCMA_CC_PCMCIA_IOWAIT 0x010C
|
|
#define BCMA_CC_IDE_CFG 0x0110
|
|
#define BCMA_CC_IDE_MEMWAIT 0x0114
|
|
#define BCMA_CC_IDE_ATTRWAIT 0x0118
|
|
#define BCMA_CC_IDE_IOWAIT 0x011C
|
|
#define BCMA_CC_PROG_CFG 0x0120
|
|
#define BCMA_CC_PROG_WAITCNT 0x0124
|
|
#define BCMA_CC_FLASH_CFG 0x0128
|
|
#define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */
|
|
#define BCMA_CC_FLASH_WAITCNT 0x012C
|
|
#define BCMA_CC_SROM_CONTROL 0x0190
|
|
#define BCMA_CC_SROM_CONTROL_START 0x80000000
|
|
#define BCMA_CC_SROM_CONTROL_BUSY 0x80000000
|
|
#define BCMA_CC_SROM_CONTROL_OPCODE 0x60000000
|
|
#define BCMA_CC_SROM_CONTROL_OP_READ 0x00000000
|
|
#define BCMA_CC_SROM_CONTROL_OP_WRITE 0x20000000
|
|
#define BCMA_CC_SROM_CONTROL_OP_WRDIS 0x40000000
|
|
#define BCMA_CC_SROM_CONTROL_OP_WREN 0x60000000
|
|
#define BCMA_CC_SROM_CONTROL_OTPSEL 0x00000010
|
|
#define BCMA_CC_SROM_CONTROL_LOCK 0x00000008
|
|
#define BCMA_CC_SROM_CONTROL_SIZE_MASK 0x00000006
|
|
#define BCMA_CC_SROM_CONTROL_SIZE_1K 0x00000000
|
|
#define BCMA_CC_SROM_CONTROL_SIZE_4K 0x00000002
|
|
#define BCMA_CC_SROM_CONTROL_SIZE_16K 0x00000004
|
|
#define BCMA_CC_SROM_CONTROL_SIZE_SHIFT 1
|
|
#define BCMA_CC_SROM_CONTROL_PRESENT 0x00000001
|
|
/* Block 0x140 - 0x190 registers are chipset specific */
|
|
#define BCMA_CC_4706_FLASHSCFG 0x18C /* Flash struct configuration */
|
|
#define BCMA_CC_4706_FLASHSCFG_MASK 0x000000ff
|
|
#define BCMA_CC_4706_FLASHSCFG_SF1 0x00000001 /* 2nd serial flash present */
|
|
#define BCMA_CC_4706_FLASHSCFG_PF1 0x00000002 /* 2nd parallel flash present */
|
|
#define BCMA_CC_4706_FLASHSCFG_SF1_TYPE 0x00000004 /* 2nd serial flash type : 0 : ST, 1 : Atmel */
|
|
#define BCMA_CC_4706_FLASHSCFG_NF1 0x00000008 /* 2nd NAND flash present */
|
|
#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_MASK 0x000000f0
|
|
#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_4MB 0x00000010 /* 4MB */
|
|
#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_8MB 0x00000020 /* 8MB */
|
|
#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_16MB 0x00000030 /* 16MB */
|
|
#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_32MB 0x00000040 /* 32MB */
|
|
#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_64MB 0x00000050 /* 64MB */
|
|
#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_128MB 0x00000060 /* 128MB */
|
|
#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_256MB 0x00000070 /* 256MB */
|
|
/* NAND flash registers for BCM4706 (corerev = 31) */
|
|
#define BCMA_CC_NFLASH_CTL 0x01A0
|
|
#define BCMA_CC_NFLASH_CTL_ERR 0x08000000
|
|
#define BCMA_CC_NFLASH_CONF 0x01A4
|
|
#define BCMA_CC_NFLASH_COL_ADDR 0x01A8
|
|
#define BCMA_CC_NFLASH_ROW_ADDR 0x01AC
|
|
#define BCMA_CC_NFLASH_DATA 0x01B0
|
|
#define BCMA_CC_NFLASH_WAITCNT0 0x01B4
|
|
/* 0x1E0 is defined as shared BCMA_CLKCTLST */
|
|
#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */
|
|
#define BCMA_CC_UART0_DATA 0x0300
|
|
#define BCMA_CC_UART0_IMR 0x0304
|
|
#define BCMA_CC_UART0_FCR 0x0308
|
|
#define BCMA_CC_UART0_LCR 0x030C
|
|
#define BCMA_CC_UART0_MCR 0x0310
|
|
#define BCMA_CC_UART0_LSR 0x0314
|
|
#define BCMA_CC_UART0_MSR 0x0318
|
|
#define BCMA_CC_UART0_SCRATCH 0x031C
|
|
#define BCMA_CC_UART1_DATA 0x0400
|
|
#define BCMA_CC_UART1_IMR 0x0404
|
|
#define BCMA_CC_UART1_FCR 0x0408
|
|
#define BCMA_CC_UART1_LCR 0x040C
|
|
#define BCMA_CC_UART1_MCR 0x0410
|
|
#define BCMA_CC_UART1_LSR 0x0414
|
|
#define BCMA_CC_UART1_MSR 0x0418
|
|
#define BCMA_CC_UART1_SCRATCH 0x041C
|
|
/* PMU registers (rev >= 20) */
|
|
#define BCMA_CC_PMU_CTL 0x0600 /* PMU control */
|
|
#define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */
|
|
#define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16
|
|
#define BCMA_CC_PMU_CTL_RES 0x00006000 /* reset control mask */
|
|
#define BCMA_CC_PMU_CTL_RES_SHIFT 13
|
|
#define BCMA_CC_PMU_CTL_RES_RELOAD 0x2 /* reload POR values */
|
|
#define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400
|
|
#define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */
|
|
#define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */
|
|
#define BCMA_CC_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */
|
|
#define BCMA_CC_PMU_CTL_XTALFREQ 0x0000007C /* Crystal freq */
|
|
#define BCMA_CC_PMU_CTL_XTALFREQ_SHIFT 2
|
|
#define BCMA_CC_PMU_CTL_ILPDIVEN 0x00000002 /* ILP div enable */
|
|
#define BCMA_CC_PMU_CTL_LPOSEL 0x00000001 /* LPO sel */
|
|
#define BCMA_CC_PMU_CAP 0x0604 /* PMU capabilities */
|
|
#define BCMA_CC_PMU_CAP_REVISION 0x000000FF /* Revision mask */
|
|
#define BCMA_CC_PMU_STAT 0x0608 /* PMU status */
|
|
#define BCMA_CC_PMU_STAT_EXT_LPO_AVAIL 0x00000100
|
|
#define BCMA_CC_PMU_STAT_WDRESET 0x00000080
|
|
#define BCMA_CC_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */
|
|
#define BCMA_CC_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */
|
|
#define BCMA_CC_PMU_STAT_HAVEALP 0x00000008 /* ALP available */
|
|
#define BCMA_CC_PMU_STAT_HAVEHT 0x00000004 /* HT available */
|
|
#define BCMA_CC_PMU_STAT_RESINIT 0x00000003 /* Res init */
|
|
#define BCMA_CC_PMU_RES_STAT 0x060C /* PMU res status */
|
|
#define BCMA_CC_PMU_RES_PEND 0x0610 /* PMU res pending */
|
|
#define BCMA_CC_PMU_TIMER 0x0614 /* PMU timer */
|
|
#define BCMA_CC_PMU_MINRES_MSK 0x0618 /* PMU min res mask */
|
|
#define BCMA_CC_PMU_MAXRES_MSK 0x061C /* PMU max res mask */
|
|
#define BCMA_CC_PMU_RES_TABSEL 0x0620 /* PMU res table sel */
|
|
#define BCMA_CC_PMU_RES_DEPMSK 0x0624 /* PMU res dep mask */
|
|
#define BCMA_CC_PMU_RES_UPDNTM 0x0628 /* PMU res updown timer */
|
|
#define BCMA_CC_PMU_RES_TIMER 0x062C /* PMU res timer */
|
|
#define BCMA_CC_PMU_CLKSTRETCH 0x0630 /* PMU clockstretch */
|
|
#define BCMA_CC_PMU_WATCHDOG 0x0634 /* PMU watchdog */
|
|
#define BCMA_CC_PMU_RES_REQTS 0x0640 /* PMU res req timer sel */
|
|
#define BCMA_CC_PMU_RES_REQT 0x0644 /* PMU res req timer */
|
|
#define BCMA_CC_PMU_RES_REQM 0x0648 /* PMU res req mask */
|
|
#define BCMA_CC_PMU_CHIPCTL_ADDR 0x0650
|
|
#define BCMA_CC_PMU_CHIPCTL_DATA 0x0654
|
|
#define BCMA_CC_PMU_REGCTL_ADDR 0x0658
|
|
#define BCMA_CC_PMU_REGCTL_DATA 0x065C
|
|
#define BCMA_CC_PMU_PLLCTL_ADDR 0x0660
|
|
#define BCMA_CC_PMU_PLLCTL_DATA 0x0664
|
|
#define BCMA_CC_PMU_STRAPOPT 0x0668 /* (corerev >= 28) */
|
|
#define BCMA_CC_PMU_XTAL_FREQ 0x066C /* (pmurev >= 10) */
|
|
#define BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK 0x00001FFF
|
|
#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_MASK 0x80000000
|
|
#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT 31
|
|
#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */
|
|
/* NAND flash MLC controller registers (corerev >= 38) */
|
|
#define BCMA_CC_NAND_REVISION 0x0C00
|
|
#define BCMA_CC_NAND_CMD_START 0x0C04
|
|
#define BCMA_CC_NAND_CMD_ADDR_X 0x0C08
|
|
#define BCMA_CC_NAND_CMD_ADDR 0x0C0C
|
|
#define BCMA_CC_NAND_CMD_END_ADDR 0x0C10
|
|
#define BCMA_CC_NAND_CS_NAND_SELECT 0x0C14
|
|
#define BCMA_CC_NAND_CS_NAND_XOR 0x0C18
|
|
#define BCMA_CC_NAND_SPARE_RD0 0x0C20
|
|
#define BCMA_CC_NAND_SPARE_RD4 0x0C24
|
|
#define BCMA_CC_NAND_SPARE_RD8 0x0C28
|
|
#define BCMA_CC_NAND_SPARE_RD12 0x0C2C
|
|
#define BCMA_CC_NAND_SPARE_WR0 0x0C30
|
|
#define BCMA_CC_NAND_SPARE_WR4 0x0C34
|
|
#define BCMA_CC_NAND_SPARE_WR8 0x0C38
|
|
#define BCMA_CC_NAND_SPARE_WR12 0x0C3C
|
|
#define BCMA_CC_NAND_ACC_CONTROL 0x0C40
|
|
#define BCMA_CC_NAND_CONFIG 0x0C48
|
|
#define BCMA_CC_NAND_TIMING_1 0x0C50
|
|
#define BCMA_CC_NAND_TIMING_2 0x0C54
|
|
#define BCMA_CC_NAND_SEMAPHORE 0x0C58
|
|
#define BCMA_CC_NAND_DEVID 0x0C60
|
|
#define BCMA_CC_NAND_DEVID_X 0x0C64
|
|
#define BCMA_CC_NAND_BLOCK_LOCK_STATUS 0x0C68
|
|
#define BCMA_CC_NAND_INTFC_STATUS 0x0C6C
|
|
#define BCMA_CC_NAND_ECC_CORR_ADDR_X 0x0C70
|
|
#define BCMA_CC_NAND_ECC_CORR_ADDR 0x0C74
|
|
#define BCMA_CC_NAND_ECC_UNC_ADDR_X 0x0C78
|
|
#define BCMA_CC_NAND_ECC_UNC_ADDR 0x0C7C
|
|
#define BCMA_CC_NAND_READ_ERROR_COUNT 0x0C80
|
|
#define BCMA_CC_NAND_CORR_STAT_THRESHOLD 0x0C84
|
|
#define BCMA_CC_NAND_READ_ADDR_X 0x0C90
|
|
#define BCMA_CC_NAND_READ_ADDR 0x0C94
|
|
#define BCMA_CC_NAND_PAGE_PROGRAM_ADDR_X 0x0C98
|
|
#define BCMA_CC_NAND_PAGE_PROGRAM_ADDR 0x0C9C
|
|
#define BCMA_CC_NAND_COPY_BACK_ADDR_X 0x0CA0
|
|
#define BCMA_CC_NAND_COPY_BACK_ADDR 0x0CA4
|
|
#define BCMA_CC_NAND_BLOCK_ERASE_ADDR_X 0x0CA8
|
|
#define BCMA_CC_NAND_BLOCK_ERASE_ADDR 0x0CAC
|
|
#define BCMA_CC_NAND_INV_READ_ADDR_X 0x0CB0
|
|
#define BCMA_CC_NAND_INV_READ_ADDR 0x0CB4
|
|
#define BCMA_CC_NAND_BLK_WR_PROTECT 0x0CC0
|
|
#define BCMA_CC_NAND_ACC_CONTROL_CS1 0x0CD0
|
|
#define BCMA_CC_NAND_CONFIG_CS1 0x0CD4
|
|
#define BCMA_CC_NAND_TIMING_1_CS1 0x0CD8
|
|
#define BCMA_CC_NAND_TIMING_2_CS1 0x0CDC
|
|
#define BCMA_CC_NAND_SPARE_RD16 0x0D30
|
|
#define BCMA_CC_NAND_SPARE_RD20 0x0D34
|
|
#define BCMA_CC_NAND_SPARE_RD24 0x0D38
|
|
#define BCMA_CC_NAND_SPARE_RD28 0x0D3C
|
|
#define BCMA_CC_NAND_CACHE_ADDR 0x0D40
|
|
#define BCMA_CC_NAND_CACHE_DATA 0x0D44
|
|
#define BCMA_CC_NAND_CTRL_CONFIG 0x0D48
|
|
#define BCMA_CC_NAND_CTRL_STATUS 0x0D4C
|
|
|
|
/* Divider allocation in 4716/47162/5356 */
|
|
#define BCMA_CC_PMU5_MAINPLL_CPU 1
|
|
#define BCMA_CC_PMU5_MAINPLL_MEM 2
|
|
#define BCMA_CC_PMU5_MAINPLL_SSB 3
|
|
|
|
/* PLL usage in 4716/47162 */
|
|
#define BCMA_CC_PMU4716_MAINPLL_PLL0 12
|
|
|
|
/* PLL usage in 5356/5357 */
|
|
#define BCMA_CC_PMU5356_MAINPLL_PLL0 0
|
|
#define BCMA_CC_PMU5357_MAINPLL_PLL0 0
|
|
|
|
/* 4706 PMU */
|
|
#define BCMA_CC_PMU4706_MAINPLL_PLL0 0
|
|
#define BCMA_CC_PMU6_4706_PROCPLL_OFF 4 /* The CPU PLL */
|
|
#define BCMA_CC_PMU6_4706_PROC_P2DIV_MASK 0x000f0000
|
|
#define BCMA_CC_PMU6_4706_PROC_P2DIV_SHIFT 16
|
|
#define BCMA_CC_PMU6_4706_PROC_P1DIV_MASK 0x0000f000
|
|
#define BCMA_CC_PMU6_4706_PROC_P1DIV_SHIFT 12
|
|
#define BCMA_CC_PMU6_4706_PROC_NDIV_INT_MASK 0x00000ff8
|
|
#define BCMA_CC_PMU6_4706_PROC_NDIV_INT_SHIFT 3
|
|
#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_MASK 0x00000007
|
|
#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_SHIFT 0
|
|
|
|
/* PMU rev 15 */
|
|
#define BCMA_CC_PMU15_PLL_PLLCTL0 0
|
|
#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_MASK 0x00000003
|
|
#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_SHIFT 0
|
|
#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK 0x003FFFFC
|
|
#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT 2
|
|
#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_MASK 0x00C00000
|
|
#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_SHIFT 22
|
|
#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_MASK 0x07000000
|
|
#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_SHIFT 24
|
|
#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_MASK 0x38000000
|
|
#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_SHIFT 27
|
|
#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_MASK 0x40000000
|
|
#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_SHIFT 30
|
|
#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_MASK 0x80000000
|
|
#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_SHIFT 31
|
|
|
|
/* ALP clock on pre-PMU chips */
|
|
#define BCMA_CC_PMU_ALP_CLOCK 20000000
|
|
/* HT clock for systems with PMU-enabled chipcommon */
|
|
#define BCMA_CC_PMU_HT_CLOCK 80000000
|
|
|
|
/* PMU rev 5 (& 6) */
|
|
#define BCMA_CC_PPL_P1P2_OFF 0
|
|
#define BCMA_CC_PPL_P1_MASK 0x0f000000
|
|
#define BCMA_CC_PPL_P1_SHIFT 24
|
|
#define BCMA_CC_PPL_P2_MASK 0x00f00000
|
|
#define BCMA_CC_PPL_P2_SHIFT 20
|
|
#define BCMA_CC_PPL_M14_OFF 1
|
|
#define BCMA_CC_PPL_MDIV_MASK 0x000000ff
|
|
#define BCMA_CC_PPL_MDIV_WIDTH 8
|
|
#define BCMA_CC_PPL_NM5_OFF 2
|
|
#define BCMA_CC_PPL_NDIV_MASK 0xfff00000
|
|
#define BCMA_CC_PPL_NDIV_SHIFT 20
|
|
#define BCMA_CC_PPL_FMAB_OFF 3
|
|
#define BCMA_CC_PPL_MRAT_MASK 0xf0000000
|
|
#define BCMA_CC_PPL_MRAT_SHIFT 28
|
|
#define BCMA_CC_PPL_ABRAT_MASK 0x08000000
|
|
#define BCMA_CC_PPL_ABRAT_SHIFT 27
|
|
#define BCMA_CC_PPL_FDIV_MASK 0x07ffffff
|
|
#define BCMA_CC_PPL_PLLCTL_OFF 4
|
|
#define BCMA_CC_PPL_PCHI_OFF 5
|
|
#define BCMA_CC_PPL_PCHI_MASK 0x0000003f
|
|
|
|
#define BCMA_CC_PMU_PLL_CTL0 0
|
|
#define BCMA_CC_PMU_PLL_CTL1 1
|
|
#define BCMA_CC_PMU_PLL_CTL2 2
|
|
#define BCMA_CC_PMU_PLL_CTL3 3
|
|
#define BCMA_CC_PMU_PLL_CTL4 4
|
|
#define BCMA_CC_PMU_PLL_CTL5 5
|
|
|
|
#define BCMA_CC_PMU1_PLL0_PC0_P1DIV_MASK 0x00f00000
|
|
#define BCMA_CC_PMU1_PLL0_PC0_P1DIV_SHIFT 20
|
|
|
|
#define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_MASK 0x1ff00000
|
|
#define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT 20
|
|
|
|
#define BCMA_CCB_MII_MNG_CTL 0x0000
|
|
#define BCMA_CCB_MII_MNG_CMD_DATA 0x0004
|
|
|
|
/* BCM4331 ChipControl numbers. */
|
|
#define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */
|
|
#define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */
|
|
#define BCMA_CHIPCTL_4331_EXT_LNA BIT(2) /* 0 disable */
|
|
#define BCMA_CHIPCTL_4331_SPROM_GPIO13_15 BIT(3) /* sprom/gpio13-15 mux */
|
|
#define BCMA_CHIPCTL_4331_EXTPA_EN BIT(4) /* 0 ext pa disable, 1 ext pa enabled */
|
|
#define BCMA_CHIPCTL_4331_GPIOCLK_ON_SPROMCS BIT(5) /* set drive out GPIO_CLK on sprom_cs pin */
|
|
#define BCMA_CHIPCTL_4331_PCIE_MDIO_ON_SPROMCS BIT(6) /* use sprom_cs pin as PCIE mdio interface */
|
|
#define BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5 BIT(7) /* aband extpa will be at gpio2/5 and sprom_dout */
|
|
#define BCMA_CHIPCTL_4331_OVR_PIPEAUXCLKEN BIT(8) /* override core control on pipe_AuxClkEnable */
|
|
#define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */
|
|
#define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */
|
|
#define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */
|
|
#define BCMA_CHIPCTL_4331_EXTPA_EN2 BIT(12) /* 0 ext pa disable, 1 ext pa enabled */
|
|
#define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */
|
|
#define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */
|
|
|
|
/* 43224 chip-specific ChipControl register bits */
|
|
#define BCMA_CCTRL_43224_GPIO_TOGGLE 0x8000 /* gpio[3:0] pins as btcoex or s/w gpio */
|
|
#define BCMA_CCTRL_43224A0_12MA_LED_DRIVE 0x00F000F0 /* 12 mA drive strength */
|
|
#define BCMA_CCTRL_43224B0_12MA_LED_DRIVE 0xF0 /* 12 mA drive strength for later 43224s */
|
|
|
|
/* 4313 Chip specific ChipControl register bits */
|
|
#define BCMA_CCTRL_4313_12MA_LED_DRIVE 0x00000007 /* 12 mA drive strengh for later 4313 */
|
|
|
|
/* BCM5357 ChipControl register bits */
|
|
#define BCMA_CHIPCTL_5357_EXTPA BIT(14)
|
|
#define BCMA_CHIPCTL_5357_ANT_MUX_2O3 BIT(15)
|
|
#define BCMA_CHIPCTL_5357_NFLASH BIT(16)
|
|
#define BCMA_CHIPCTL_5357_I2S_PINS_ENABLE BIT(18)
|
|
#define BCMA_CHIPCTL_5357_I2CSPI_PINS_ENABLE BIT(19)
|
|
|
|
#define BCMA_RES_4314_LPLDO_PU BIT(0)
|
|
#define BCMA_RES_4314_PMU_SLEEP_DIS BIT(1)
|
|
#define BCMA_RES_4314_PMU_BG_PU BIT(2)
|
|
#define BCMA_RES_4314_CBUCK_LPOM_PU BIT(3)
|
|
#define BCMA_RES_4314_CBUCK_PFM_PU BIT(4)
|
|
#define BCMA_RES_4314_CLDO_PU BIT(5)
|
|
#define BCMA_RES_4314_LPLDO2_LVM BIT(6)
|
|
#define BCMA_RES_4314_WL_PMU_PU BIT(7)
|
|
#define BCMA_RES_4314_LNLDO_PU BIT(8)
|
|
#define BCMA_RES_4314_LDO3P3_PU BIT(9)
|
|
#define BCMA_RES_4314_OTP_PU BIT(10)
|
|
#define BCMA_RES_4314_XTAL_PU BIT(11)
|
|
#define BCMA_RES_4314_WL_PWRSW_PU BIT(12)
|
|
#define BCMA_RES_4314_LQ_AVAIL BIT(13)
|
|
#define BCMA_RES_4314_LOGIC_RET BIT(14)
|
|
#define BCMA_RES_4314_MEM_SLEEP BIT(15)
|
|
#define BCMA_RES_4314_MACPHY_RET BIT(16)
|
|
#define BCMA_RES_4314_WL_CORE_READY BIT(17)
|
|
#define BCMA_RES_4314_ILP_REQ BIT(18)
|
|
#define BCMA_RES_4314_ALP_AVAIL BIT(19)
|
|
#define BCMA_RES_4314_MISC_PWRSW_PU BIT(20)
|
|
#define BCMA_RES_4314_SYNTH_PWRSW_PU BIT(21)
|
|
#define BCMA_RES_4314_RX_PWRSW_PU BIT(22)
|
|
#define BCMA_RES_4314_RADIO_PU BIT(23)
|
|
#define BCMA_RES_4314_VCO_LDO_PU BIT(24)
|
|
#define BCMA_RES_4314_AFE_LDO_PU BIT(25)
|
|
#define BCMA_RES_4314_RX_LDO_PU BIT(26)
|
|
#define BCMA_RES_4314_TX_LDO_PU BIT(27)
|
|
#define BCMA_RES_4314_HT_AVAIL BIT(28)
|
|
#define BCMA_RES_4314_MACPHY_CLK_AVAIL BIT(29)
|
|
|
|
/* Data for the PMU, if available.
|
|
* Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
|
|
*/
|
|
struct bcma_chipcommon_pmu {
|
|
struct bcma_device *core; /* Can be separated core or just ChipCommon one */
|
|
u8 rev; /* PMU revision */
|
|
u32 crystalfreq; /* The active crystal frequency (in kHz) */
|
|
};
|
|
|
|
#ifdef CONFIG_BCMA_PFLASH
|
|
struct bcma_pflash {
|
|
bool present;
|
|
};
|
|
#endif
|
|
|
|
#ifdef CONFIG_BCMA_SFLASH
|
|
struct mtd_info;
|
|
|
|
struct bcma_sflash {
|
|
bool present;
|
|
u32 blocksize;
|
|
u16 numblocks;
|
|
u32 size;
|
|
};
|
|
#endif
|
|
|
|
#ifdef CONFIG_BCMA_NFLASH
|
|
struct bcma_nflash {
|
|
bool present;
|
|
bool boot; /* This is the flash the SoC boots from */
|
|
};
|
|
#endif
|
|
|
|
#ifdef CONFIG_BCMA_DRIVER_MIPS
|
|
struct bcma_serial_port {
|
|
void *regs;
|
|
unsigned long clockspeed;
|
|
unsigned int irq;
|
|
unsigned int baud_base;
|
|
unsigned int reg_shift;
|
|
};
|
|
#endif /* CONFIG_BCMA_DRIVER_MIPS */
|
|
|
|
struct bcma_drv_cc {
|
|
struct bcma_device *core;
|
|
u32 status;
|
|
u32 capabilities;
|
|
u32 capabilities_ext;
|
|
u8 setup_done:1;
|
|
u8 early_setup_done:1;
|
|
/* Fast Powerup Delay constant */
|
|
u16 fast_pwrup_delay;
|
|
struct bcma_chipcommon_pmu pmu;
|
|
#ifdef CONFIG_BCMA_PFLASH
|
|
struct bcma_pflash pflash;
|
|
#endif
|
|
#ifdef CONFIG_BCMA_SFLASH
|
|
struct bcma_sflash sflash;
|
|
#endif
|
|
#ifdef CONFIG_BCMA_NFLASH
|
|
struct bcma_nflash nflash;
|
|
#endif
|
|
|
|
#ifdef CONFIG_BCMA_DRIVER_MIPS
|
|
int nr_serial_ports;
|
|
struct bcma_serial_port serial_ports[4];
|
|
#endif /* CONFIG_BCMA_DRIVER_MIPS */
|
|
u32 ticks_per_ms;
|
|
struct platform_device *watchdog;
|
|
|
|
/* Lock for GPIO register access. */
|
|
spinlock_t gpio_lock;
|
|
#ifdef CONFIG_BCMA_DRIVER_GPIO
|
|
struct gpio_chip gpio;
|
|
#endif
|
|
};
|
|
|
|
struct bcma_drv_cc_b {
|
|
struct bcma_device *core;
|
|
u8 setup_done:1;
|
|
void __iomem *mii;
|
|
};
|
|
|
|
/* Register access */
|
|
#define bcma_cc_read32(cc, offset) \
|
|
bcma_read32((cc)->core, offset)
|
|
#define bcma_cc_write32(cc, offset, val) \
|
|
bcma_write32((cc)->core, offset, val)
|
|
|
|
#define bcma_cc_mask32(cc, offset, mask) \
|
|
bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) & (mask))
|
|
#define bcma_cc_set32(cc, offset, set) \
|
|
bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) | (set))
|
|
#define bcma_cc_maskset32(cc, offset, mask, set) \
|
|
bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
|
|
|
|
/* PMU registers access */
|
|
#define bcma_pmu_read32(cc, offset) \
|
|
bcma_read32((cc)->pmu.core, offset)
|
|
#define bcma_pmu_write32(cc, offset, val) \
|
|
bcma_write32((cc)->pmu.core, offset, val)
|
|
|
|
#define bcma_pmu_mask32(cc, offset, mask) \
|
|
bcma_pmu_write32(cc, offset, bcma_pmu_read32(cc, offset) & (mask))
|
|
#define bcma_pmu_set32(cc, offset, set) \
|
|
bcma_pmu_write32(cc, offset, bcma_pmu_read32(cc, offset) | (set))
|
|
#define bcma_pmu_maskset32(cc, offset, mask, set) \
|
|
bcma_pmu_write32(cc, offset, (bcma_pmu_read32(cc, offset) & (mask)) | (set))
|
|
|
|
extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks);
|
|
|
|
extern u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc);
|
|
|
|
void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
|
|
|
|
u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask);
|
|
|
|
/* Chipcommon GPIO pin access. */
|
|
u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask);
|
|
u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value);
|
|
u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value);
|
|
u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value);
|
|
u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value);
|
|
u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value);
|
|
u32 bcma_chipco_gpio_pullup(struct bcma_drv_cc *cc, u32 mask, u32 value);
|
|
u32 bcma_chipco_gpio_pulldown(struct bcma_drv_cc *cc, u32 mask, u32 value);
|
|
|
|
/* PMU support */
|
|
extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset,
|
|
u32 value);
|
|
extern void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset,
|
|
u32 mask, u32 set);
|
|
extern void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc,
|
|
u32 offset, u32 mask, u32 set);
|
|
extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc,
|
|
u32 offset, u32 mask, u32 set);
|
|
extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid);
|
|
|
|
extern u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc);
|
|
|
|
void bcma_chipco_b_mii_write(struct bcma_drv_cc_b *ccb, u32 offset, u32 value);
|
|
|
|
#endif /* LINUX_BCMA_DRIVER_CC_H_ */
|