mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-28 20:02:17 +00:00
![Andrew Duggan](/assets/img/avatar_default.png)
A touchpad may have firmware based palm detection code enabled which suppresses 2D data from being reported when the firmware believes a palm is on the touchpad. This functionality is meant to be used in mouse mode without a driver. When a driver is present, the driver can do a better job of determining if a contact is a palm. If this gesture is enabled on a touchpad operating in rmi mode then the firmware will not properly clear the palm detect interrupt, causing the touchpad to interrupt indefinately. This patch disables the palm detect gesture when the touchpad is operating in rmi mode. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
1282 lines
31 KiB
C
1282 lines
31 KiB
C
/*
|
|
* Copyright (c) 2013 Andrew Duggan <aduggan@synaptics.com>
|
|
* Copyright (c) 2013 Synaptics Incorporated
|
|
* Copyright (c) 2014 Benjamin Tissoires <benjamin.tissoires@gmail.com>
|
|
* Copyright (c) 2014 Red Hat, Inc
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the Free
|
|
* Software Foundation; either version 2 of the License, or (at your option)
|
|
* any later version.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/hid.h>
|
|
#include <linux/input.h>
|
|
#include <linux/input/mt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/sched.h>
|
|
#include "hid-ids.h"
|
|
|
|
#define RMI_MOUSE_REPORT_ID 0x01 /* Mouse emulation Report */
|
|
#define RMI_WRITE_REPORT_ID 0x09 /* Output Report */
|
|
#define RMI_READ_ADDR_REPORT_ID 0x0a /* Output Report */
|
|
#define RMI_READ_DATA_REPORT_ID 0x0b /* Input Report */
|
|
#define RMI_ATTN_REPORT_ID 0x0c /* Input Report */
|
|
#define RMI_SET_RMI_MODE_REPORT_ID 0x0f /* Feature Report */
|
|
|
|
/* flags */
|
|
#define RMI_READ_REQUEST_PENDING BIT(0)
|
|
#define RMI_READ_DATA_PENDING BIT(1)
|
|
#define RMI_STARTED BIT(2)
|
|
|
|
/* device flags */
|
|
#define RMI_DEVICE BIT(0)
|
|
#define RMI_DEVICE_HAS_PHYS_BUTTONS BIT(1)
|
|
|
|
enum rmi_mode_type {
|
|
RMI_MODE_OFF = 0,
|
|
RMI_MODE_ATTN_REPORTS = 1,
|
|
RMI_MODE_NO_PACKED_ATTN_REPORTS = 2,
|
|
};
|
|
|
|
struct rmi_function {
|
|
unsigned page; /* page of the function */
|
|
u16 query_base_addr; /* base address for queries */
|
|
u16 command_base_addr; /* base address for commands */
|
|
u16 control_base_addr; /* base address for controls */
|
|
u16 data_base_addr; /* base address for datas */
|
|
unsigned int interrupt_base; /* cross-function interrupt number
|
|
* (uniq in the device)*/
|
|
unsigned int interrupt_count; /* number of interrupts */
|
|
unsigned int report_size; /* size of a report */
|
|
unsigned long irq_mask; /* mask of the interrupts
|
|
* (to be applied against ATTN IRQ) */
|
|
};
|
|
|
|
/**
|
|
* struct rmi_data - stores information for hid communication
|
|
*
|
|
* @page_mutex: Locks current page to avoid changing pages in unexpected ways.
|
|
* @page: Keeps track of the current virtual page
|
|
*
|
|
* @wait: Used for waiting for read data
|
|
*
|
|
* @writeReport: output buffer when writing RMI registers
|
|
* @readReport: input buffer when reading RMI registers
|
|
*
|
|
* @input_report_size: size of an input report (advertised by HID)
|
|
* @output_report_size: size of an output report (advertised by HID)
|
|
*
|
|
* @flags: flags for the current device (started, reading, etc...)
|
|
*
|
|
* @f11: placeholder of internal RMI function F11 description
|
|
* @f30: placeholder of internal RMI function F30 description
|
|
*
|
|
* @max_fingers: maximum finger count reported by the device
|
|
* @max_x: maximum x value reported by the device
|
|
* @max_y: maximum y value reported by the device
|
|
*
|
|
* @gpio_led_count: count of GPIOs + LEDs reported by F30
|
|
* @button_count: actual physical buttons count
|
|
* @button_mask: button mask used to decode GPIO ATTN reports
|
|
* @button_state_mask: pull state of the buttons
|
|
*
|
|
* @input: pointer to the kernel input device
|
|
*
|
|
* @reset_work: worker which will be called in case of a mouse report
|
|
* @hdev: pointer to the struct hid_device
|
|
*/
|
|
struct rmi_data {
|
|
struct mutex page_mutex;
|
|
int page;
|
|
|
|
wait_queue_head_t wait;
|
|
|
|
u8 *writeReport;
|
|
u8 *readReport;
|
|
|
|
int input_report_size;
|
|
int output_report_size;
|
|
|
|
unsigned long flags;
|
|
|
|
struct rmi_function f01;
|
|
struct rmi_function f11;
|
|
struct rmi_function f30;
|
|
|
|
unsigned int max_fingers;
|
|
unsigned int max_x;
|
|
unsigned int max_y;
|
|
unsigned int x_size_mm;
|
|
unsigned int y_size_mm;
|
|
|
|
unsigned int gpio_led_count;
|
|
unsigned int button_count;
|
|
unsigned long button_mask;
|
|
unsigned long button_state_mask;
|
|
|
|
struct input_dev *input;
|
|
|
|
struct work_struct reset_work;
|
|
struct hid_device *hdev;
|
|
|
|
unsigned long device_flags;
|
|
unsigned long firmware_id;
|
|
};
|
|
|
|
#define RMI_PAGE(addr) (((addr) >> 8) & 0xff)
|
|
|
|
static int rmi_write_report(struct hid_device *hdev, u8 *report, int len);
|
|
|
|
/**
|
|
* rmi_set_page - Set RMI page
|
|
* @hdev: The pointer to the hid_device struct
|
|
* @page: The new page address.
|
|
*
|
|
* RMI devices have 16-bit addressing, but some of the physical
|
|
* implementations (like SMBus) only have 8-bit addressing. So RMI implements
|
|
* a page address at 0xff of every page so we can reliable page addresses
|
|
* every 256 registers.
|
|
*
|
|
* The page_mutex lock must be held when this function is entered.
|
|
*
|
|
* Returns zero on success, non-zero on failure.
|
|
*/
|
|
static int rmi_set_page(struct hid_device *hdev, u8 page)
|
|
{
|
|
struct rmi_data *data = hid_get_drvdata(hdev);
|
|
int retval;
|
|
|
|
data->writeReport[0] = RMI_WRITE_REPORT_ID;
|
|
data->writeReport[1] = 1;
|
|
data->writeReport[2] = 0xFF;
|
|
data->writeReport[4] = page;
|
|
|
|
retval = rmi_write_report(hdev, data->writeReport,
|
|
data->output_report_size);
|
|
if (retval != data->output_report_size) {
|
|
dev_err(&hdev->dev,
|
|
"%s: set page failed: %d.", __func__, retval);
|
|
return retval;
|
|
}
|
|
|
|
data->page = page;
|
|
return 0;
|
|
}
|
|
|
|
static int rmi_set_mode(struct hid_device *hdev, u8 mode)
|
|
{
|
|
int ret;
|
|
u8 txbuf[2] = {RMI_SET_RMI_MODE_REPORT_ID, mode};
|
|
|
|
ret = hid_hw_raw_request(hdev, RMI_SET_RMI_MODE_REPORT_ID, txbuf,
|
|
sizeof(txbuf), HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
|
|
if (ret < 0) {
|
|
dev_err(&hdev->dev, "unable to set rmi mode to %d (%d)\n", mode,
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rmi_write_report(struct hid_device *hdev, u8 *report, int len)
|
|
{
|
|
int ret;
|
|
|
|
ret = hid_hw_output_report(hdev, (void *)report, len);
|
|
if (ret < 0) {
|
|
dev_err(&hdev->dev, "failed to write hid report (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rmi_read_block(struct hid_device *hdev, u16 addr, void *buf,
|
|
const int len)
|
|
{
|
|
struct rmi_data *data = hid_get_drvdata(hdev);
|
|
int ret;
|
|
int bytes_read;
|
|
int bytes_needed;
|
|
int retries;
|
|
int read_input_count;
|
|
|
|
mutex_lock(&data->page_mutex);
|
|
|
|
if (RMI_PAGE(addr) != data->page) {
|
|
ret = rmi_set_page(hdev, RMI_PAGE(addr));
|
|
if (ret < 0)
|
|
goto exit;
|
|
}
|
|
|
|
for (retries = 5; retries > 0; retries--) {
|
|
data->writeReport[0] = RMI_READ_ADDR_REPORT_ID;
|
|
data->writeReport[1] = 0; /* old 1 byte read count */
|
|
data->writeReport[2] = addr & 0xFF;
|
|
data->writeReport[3] = (addr >> 8) & 0xFF;
|
|
data->writeReport[4] = len & 0xFF;
|
|
data->writeReport[5] = (len >> 8) & 0xFF;
|
|
|
|
set_bit(RMI_READ_REQUEST_PENDING, &data->flags);
|
|
|
|
ret = rmi_write_report(hdev, data->writeReport,
|
|
data->output_report_size);
|
|
if (ret != data->output_report_size) {
|
|
clear_bit(RMI_READ_REQUEST_PENDING, &data->flags);
|
|
dev_err(&hdev->dev,
|
|
"failed to write request output report (%d)\n",
|
|
ret);
|
|
goto exit;
|
|
}
|
|
|
|
bytes_read = 0;
|
|
bytes_needed = len;
|
|
while (bytes_read < len) {
|
|
if (!wait_event_timeout(data->wait,
|
|
test_bit(RMI_READ_DATA_PENDING, &data->flags),
|
|
msecs_to_jiffies(1000))) {
|
|
hid_warn(hdev, "%s: timeout elapsed\n",
|
|
__func__);
|
|
ret = -EAGAIN;
|
|
break;
|
|
}
|
|
|
|
read_input_count = data->readReport[1];
|
|
memcpy(buf + bytes_read, &data->readReport[2],
|
|
read_input_count < bytes_needed ?
|
|
read_input_count : bytes_needed);
|
|
|
|
bytes_read += read_input_count;
|
|
bytes_needed -= read_input_count;
|
|
clear_bit(RMI_READ_DATA_PENDING, &data->flags);
|
|
}
|
|
|
|
if (ret >= 0) {
|
|
ret = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
exit:
|
|
clear_bit(RMI_READ_REQUEST_PENDING, &data->flags);
|
|
mutex_unlock(&data->page_mutex);
|
|
return ret;
|
|
}
|
|
|
|
static inline int rmi_read(struct hid_device *hdev, u16 addr, void *buf)
|
|
{
|
|
return rmi_read_block(hdev, addr, buf, 1);
|
|
}
|
|
|
|
static int rmi_write_block(struct hid_device *hdev, u16 addr, void *buf,
|
|
const int len)
|
|
{
|
|
struct rmi_data *data = hid_get_drvdata(hdev);
|
|
int ret;
|
|
|
|
mutex_lock(&data->page_mutex);
|
|
|
|
if (RMI_PAGE(addr) != data->page) {
|
|
ret = rmi_set_page(hdev, RMI_PAGE(addr));
|
|
if (ret < 0)
|
|
goto exit;
|
|
}
|
|
|
|
data->writeReport[0] = RMI_WRITE_REPORT_ID;
|
|
data->writeReport[1] = len;
|
|
data->writeReport[2] = addr & 0xFF;
|
|
data->writeReport[3] = (addr >> 8) & 0xFF;
|
|
memcpy(&data->writeReport[4], buf, len);
|
|
|
|
ret = rmi_write_report(hdev, data->writeReport,
|
|
data->output_report_size);
|
|
if (ret < 0) {
|
|
dev_err(&hdev->dev,
|
|
"failed to write request output report (%d)\n",
|
|
ret);
|
|
goto exit;
|
|
}
|
|
ret = 0;
|
|
|
|
exit:
|
|
mutex_unlock(&data->page_mutex);
|
|
return ret;
|
|
}
|
|
|
|
static inline int rmi_write(struct hid_device *hdev, u16 addr, void *buf)
|
|
{
|
|
return rmi_write_block(hdev, addr, buf, 1);
|
|
}
|
|
|
|
static void rmi_f11_process_touch(struct rmi_data *hdata, int slot,
|
|
u8 finger_state, u8 *touch_data)
|
|
{
|
|
int x, y, wx, wy;
|
|
int wide, major, minor;
|
|
int z;
|
|
|
|
input_mt_slot(hdata->input, slot);
|
|
input_mt_report_slot_state(hdata->input, MT_TOOL_FINGER,
|
|
finger_state == 0x01);
|
|
if (finger_state == 0x01) {
|
|
x = (touch_data[0] << 4) | (touch_data[2] & 0x0F);
|
|
y = (touch_data[1] << 4) | (touch_data[2] >> 4);
|
|
wx = touch_data[3] & 0x0F;
|
|
wy = touch_data[3] >> 4;
|
|
wide = (wx > wy);
|
|
major = max(wx, wy);
|
|
minor = min(wx, wy);
|
|
z = touch_data[4];
|
|
|
|
/* y is inverted */
|
|
y = hdata->max_y - y;
|
|
|
|
input_event(hdata->input, EV_ABS, ABS_MT_POSITION_X, x);
|
|
input_event(hdata->input, EV_ABS, ABS_MT_POSITION_Y, y);
|
|
input_event(hdata->input, EV_ABS, ABS_MT_ORIENTATION, wide);
|
|
input_event(hdata->input, EV_ABS, ABS_MT_PRESSURE, z);
|
|
input_event(hdata->input, EV_ABS, ABS_MT_TOUCH_MAJOR, major);
|
|
input_event(hdata->input, EV_ABS, ABS_MT_TOUCH_MINOR, minor);
|
|
}
|
|
}
|
|
|
|
static void rmi_reset_work(struct work_struct *work)
|
|
{
|
|
struct rmi_data *hdata = container_of(work, struct rmi_data,
|
|
reset_work);
|
|
|
|
/* switch the device to RMI if we receive a generic mouse report */
|
|
rmi_set_mode(hdata->hdev, RMI_MODE_ATTN_REPORTS);
|
|
}
|
|
|
|
static inline int rmi_schedule_reset(struct hid_device *hdev)
|
|
{
|
|
struct rmi_data *hdata = hid_get_drvdata(hdev);
|
|
return schedule_work(&hdata->reset_work);
|
|
}
|
|
|
|
static int rmi_f11_input_event(struct hid_device *hdev, u8 irq, u8 *data,
|
|
int size)
|
|
{
|
|
struct rmi_data *hdata = hid_get_drvdata(hdev);
|
|
int offset;
|
|
int i;
|
|
|
|
if (!(irq & hdata->f11.irq_mask) || size <= 0)
|
|
return 0;
|
|
|
|
offset = (hdata->max_fingers >> 2) + 1;
|
|
for (i = 0; i < hdata->max_fingers; i++) {
|
|
int fs_byte_position = i >> 2;
|
|
int fs_bit_position = (i & 0x3) << 1;
|
|
int finger_state = (data[fs_byte_position] >> fs_bit_position) &
|
|
0x03;
|
|
int position = offset + 5 * i;
|
|
|
|
if (position + 5 > size) {
|
|
/* partial report, go on with what we received */
|
|
printk_once(KERN_WARNING
|
|
"%s %s: Detected incomplete finger report. Finger reports may occasionally get dropped on this platform.\n",
|
|
dev_driver_string(&hdev->dev),
|
|
dev_name(&hdev->dev));
|
|
hid_dbg(hdev, "Incomplete finger report\n");
|
|
break;
|
|
}
|
|
|
|
rmi_f11_process_touch(hdata, i, finger_state, &data[position]);
|
|
}
|
|
input_mt_sync_frame(hdata->input);
|
|
input_sync(hdata->input);
|
|
return hdata->f11.report_size;
|
|
}
|
|
|
|
static int rmi_f30_input_event(struct hid_device *hdev, u8 irq, u8 *data,
|
|
int size)
|
|
{
|
|
struct rmi_data *hdata = hid_get_drvdata(hdev);
|
|
int i;
|
|
int button = 0;
|
|
bool value;
|
|
|
|
if (!(irq & hdata->f30.irq_mask))
|
|
return 0;
|
|
|
|
if (size < (int)hdata->f30.report_size) {
|
|
hid_warn(hdev, "Click Button pressed, but the click data is missing\n");
|
|
return 0;
|
|
}
|
|
|
|
for (i = 0; i < hdata->gpio_led_count; i++) {
|
|
if (test_bit(i, &hdata->button_mask)) {
|
|
value = (data[i / 8] >> (i & 0x07)) & BIT(0);
|
|
if (test_bit(i, &hdata->button_state_mask))
|
|
value = !value;
|
|
input_event(hdata->input, EV_KEY, BTN_LEFT + button++,
|
|
value);
|
|
}
|
|
}
|
|
return hdata->f30.report_size;
|
|
}
|
|
|
|
static int rmi_input_event(struct hid_device *hdev, u8 *data, int size)
|
|
{
|
|
struct rmi_data *hdata = hid_get_drvdata(hdev);
|
|
unsigned long irq_mask = 0;
|
|
unsigned index = 2;
|
|
|
|
if (!(test_bit(RMI_STARTED, &hdata->flags)))
|
|
return 0;
|
|
|
|
irq_mask |= hdata->f11.irq_mask;
|
|
irq_mask |= hdata->f30.irq_mask;
|
|
|
|
if (data[1] & ~irq_mask)
|
|
hid_dbg(hdev, "unknown intr source:%02lx %s:%d\n",
|
|
data[1] & ~irq_mask, __FILE__, __LINE__);
|
|
|
|
if (hdata->f11.interrupt_base < hdata->f30.interrupt_base) {
|
|
index += rmi_f11_input_event(hdev, data[1], &data[index],
|
|
size - index);
|
|
index += rmi_f30_input_event(hdev, data[1], &data[index],
|
|
size - index);
|
|
} else {
|
|
index += rmi_f30_input_event(hdev, data[1], &data[index],
|
|
size - index);
|
|
index += rmi_f11_input_event(hdev, data[1], &data[index],
|
|
size - index);
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int rmi_read_data_event(struct hid_device *hdev, u8 *data, int size)
|
|
{
|
|
struct rmi_data *hdata = hid_get_drvdata(hdev);
|
|
|
|
if (!test_bit(RMI_READ_REQUEST_PENDING, &hdata->flags)) {
|
|
hid_dbg(hdev, "no read request pending\n");
|
|
return 0;
|
|
}
|
|
|
|
memcpy(hdata->readReport, data, size < hdata->input_report_size ?
|
|
size : hdata->input_report_size);
|
|
set_bit(RMI_READ_DATA_PENDING, &hdata->flags);
|
|
wake_up(&hdata->wait);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int rmi_check_sanity(struct hid_device *hdev, u8 *data, int size)
|
|
{
|
|
int valid_size = size;
|
|
/*
|
|
* On the Dell XPS 13 9333, the bus sometimes get confused and fills
|
|
* the report with a sentinel value "ff". Synaptics told us that such
|
|
* behavior does not comes from the touchpad itself, so we filter out
|
|
* such reports here.
|
|
*/
|
|
|
|
while ((data[valid_size - 1] == 0xff) && valid_size > 0)
|
|
valid_size--;
|
|
|
|
return valid_size;
|
|
}
|
|
|
|
static int rmi_raw_event(struct hid_device *hdev,
|
|
struct hid_report *report, u8 *data, int size)
|
|
{
|
|
size = rmi_check_sanity(hdev, data, size);
|
|
if (size < 2)
|
|
return 0;
|
|
|
|
switch (data[0]) {
|
|
case RMI_READ_DATA_REPORT_ID:
|
|
return rmi_read_data_event(hdev, data, size);
|
|
case RMI_ATTN_REPORT_ID:
|
|
return rmi_input_event(hdev, data, size);
|
|
default:
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rmi_event(struct hid_device *hdev, struct hid_field *field,
|
|
struct hid_usage *usage, __s32 value)
|
|
{
|
|
struct rmi_data *data = hid_get_drvdata(hdev);
|
|
|
|
if ((data->device_flags & RMI_DEVICE) &&
|
|
(field->application == HID_GD_POINTER ||
|
|
field->application == HID_GD_MOUSE)) {
|
|
if (data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS) {
|
|
if ((usage->hid & HID_USAGE_PAGE) == HID_UP_BUTTON)
|
|
return 0;
|
|
|
|
if ((usage->hid == HID_GD_X || usage->hid == HID_GD_Y)
|
|
&& !value)
|
|
return 1;
|
|
}
|
|
|
|
rmi_schedule_reset(hdev);
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int rmi_post_reset(struct hid_device *hdev)
|
|
{
|
|
return rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS);
|
|
}
|
|
|
|
static int rmi_post_resume(struct hid_device *hdev)
|
|
{
|
|
return rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS);
|
|
}
|
|
#endif /* CONFIG_PM */
|
|
|
|
#define RMI4_MAX_PAGE 0xff
|
|
#define RMI4_PAGE_SIZE 0x0100
|
|
|
|
#define PDT_START_SCAN_LOCATION 0x00e9
|
|
#define PDT_END_SCAN_LOCATION 0x0005
|
|
#define RMI4_END_OF_PDT(id) ((id) == 0x00 || (id) == 0xff)
|
|
|
|
struct pdt_entry {
|
|
u8 query_base_addr:8;
|
|
u8 command_base_addr:8;
|
|
u8 control_base_addr:8;
|
|
u8 data_base_addr:8;
|
|
u8 interrupt_source_count:3;
|
|
u8 bits3and4:2;
|
|
u8 function_version:2;
|
|
u8 bit7:1;
|
|
u8 function_number:8;
|
|
} __attribute__((__packed__));
|
|
|
|
static inline unsigned long rmi_gen_mask(unsigned irq_base, unsigned irq_count)
|
|
{
|
|
return GENMASK(irq_count + irq_base - 1, irq_base);
|
|
}
|
|
|
|
static void rmi_register_function(struct rmi_data *data,
|
|
struct pdt_entry *pdt_entry, int page, unsigned interrupt_count)
|
|
{
|
|
struct rmi_function *f = NULL;
|
|
u16 page_base = page << 8;
|
|
|
|
switch (pdt_entry->function_number) {
|
|
case 0x01:
|
|
f = &data->f01;
|
|
break;
|
|
case 0x11:
|
|
f = &data->f11;
|
|
break;
|
|
case 0x30:
|
|
f = &data->f30;
|
|
break;
|
|
}
|
|
|
|
if (f) {
|
|
f->page = page;
|
|
f->query_base_addr = page_base | pdt_entry->query_base_addr;
|
|
f->command_base_addr = page_base | pdt_entry->command_base_addr;
|
|
f->control_base_addr = page_base | pdt_entry->control_base_addr;
|
|
f->data_base_addr = page_base | pdt_entry->data_base_addr;
|
|
f->interrupt_base = interrupt_count;
|
|
f->interrupt_count = pdt_entry->interrupt_source_count;
|
|
f->irq_mask = rmi_gen_mask(f->interrupt_base,
|
|
f->interrupt_count);
|
|
}
|
|
}
|
|
|
|
static int rmi_scan_pdt(struct hid_device *hdev)
|
|
{
|
|
struct rmi_data *data = hid_get_drvdata(hdev);
|
|
struct pdt_entry entry;
|
|
int page;
|
|
bool page_has_function;
|
|
int i;
|
|
int retval;
|
|
int interrupt = 0;
|
|
u16 page_start, pdt_start , pdt_end;
|
|
|
|
hid_info(hdev, "Scanning PDT...\n");
|
|
|
|
for (page = 0; (page <= RMI4_MAX_PAGE); page++) {
|
|
page_start = RMI4_PAGE_SIZE * page;
|
|
pdt_start = page_start + PDT_START_SCAN_LOCATION;
|
|
pdt_end = page_start + PDT_END_SCAN_LOCATION;
|
|
|
|
page_has_function = false;
|
|
for (i = pdt_start; i >= pdt_end; i -= sizeof(entry)) {
|
|
retval = rmi_read_block(hdev, i, &entry, sizeof(entry));
|
|
if (retval) {
|
|
hid_err(hdev,
|
|
"Read of PDT entry at %#06x failed.\n",
|
|
i);
|
|
goto error_exit;
|
|
}
|
|
|
|
if (RMI4_END_OF_PDT(entry.function_number))
|
|
break;
|
|
|
|
page_has_function = true;
|
|
|
|
hid_info(hdev, "Found F%02X on page %#04x\n",
|
|
entry.function_number, page);
|
|
|
|
rmi_register_function(data, &entry, page, interrupt);
|
|
interrupt += entry.interrupt_source_count;
|
|
}
|
|
|
|
if (!page_has_function)
|
|
break;
|
|
}
|
|
|
|
hid_info(hdev, "%s: Done with PDT scan.\n", __func__);
|
|
retval = 0;
|
|
|
|
error_exit:
|
|
return retval;
|
|
}
|
|
|
|
#define RMI_DEVICE_F01_BASIC_QUERY_LEN 11
|
|
|
|
static int rmi_populate_f01(struct hid_device *hdev)
|
|
{
|
|
struct rmi_data *data = hid_get_drvdata(hdev);
|
|
u8 basic_queries[RMI_DEVICE_F01_BASIC_QUERY_LEN];
|
|
u8 info[3];
|
|
int ret;
|
|
bool has_query42;
|
|
bool has_lts;
|
|
bool has_sensor_id;
|
|
bool has_ds4_queries = false;
|
|
bool has_build_id_query = false;
|
|
bool has_package_id_query = false;
|
|
u16 query_offset = data->f01.query_base_addr;
|
|
u16 prod_info_addr;
|
|
u8 ds4_query_len;
|
|
|
|
ret = rmi_read_block(hdev, query_offset, basic_queries,
|
|
RMI_DEVICE_F01_BASIC_QUERY_LEN);
|
|
if (ret) {
|
|
hid_err(hdev, "Can not read basic queries from Function 0x1.\n");
|
|
return ret;
|
|
}
|
|
|
|
has_lts = !!(basic_queries[0] & BIT(2));
|
|
has_sensor_id = !!(basic_queries[1] & BIT(3));
|
|
has_query42 = !!(basic_queries[1] & BIT(7));
|
|
|
|
query_offset += 11;
|
|
prod_info_addr = query_offset + 6;
|
|
query_offset += 10;
|
|
|
|
if (has_lts)
|
|
query_offset += 20;
|
|
|
|
if (has_sensor_id)
|
|
query_offset++;
|
|
|
|
if (has_query42) {
|
|
ret = rmi_read(hdev, query_offset, info);
|
|
if (ret) {
|
|
hid_err(hdev, "Can not read query42.\n");
|
|
return ret;
|
|
}
|
|
has_ds4_queries = !!(info[0] & BIT(0));
|
|
query_offset++;
|
|
}
|
|
|
|
if (has_ds4_queries) {
|
|
ret = rmi_read(hdev, query_offset, &ds4_query_len);
|
|
if (ret) {
|
|
hid_err(hdev, "Can not read DS4 Query length.\n");
|
|
return ret;
|
|
}
|
|
query_offset++;
|
|
|
|
if (ds4_query_len > 0) {
|
|
ret = rmi_read(hdev, query_offset, info);
|
|
if (ret) {
|
|
hid_err(hdev, "Can not read DS4 query.\n");
|
|
return ret;
|
|
}
|
|
|
|
has_package_id_query = !!(info[0] & BIT(0));
|
|
has_build_id_query = !!(info[0] & BIT(1));
|
|
}
|
|
}
|
|
|
|
if (has_package_id_query)
|
|
prod_info_addr++;
|
|
|
|
if (has_build_id_query) {
|
|
ret = rmi_read_block(hdev, prod_info_addr, info, 3);
|
|
if (ret) {
|
|
hid_err(hdev, "Can not read product info.\n");
|
|
return ret;
|
|
}
|
|
|
|
data->firmware_id = info[1] << 8 | info[0];
|
|
data->firmware_id += info[2] * 65536;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rmi_populate_f11(struct hid_device *hdev)
|
|
{
|
|
struct rmi_data *data = hid_get_drvdata(hdev);
|
|
u8 buf[20];
|
|
int ret;
|
|
bool has_query9;
|
|
bool has_query10 = false;
|
|
bool has_query11;
|
|
bool has_query12;
|
|
bool has_query27;
|
|
bool has_query28;
|
|
bool has_query36 = false;
|
|
bool has_physical_props;
|
|
bool has_gestures;
|
|
bool has_rel;
|
|
bool has_data40 = false;
|
|
bool has_dribble = false;
|
|
bool has_palm_detect = false;
|
|
unsigned x_size, y_size;
|
|
u16 query_offset;
|
|
|
|
if (!data->f11.query_base_addr) {
|
|
hid_err(hdev, "No 2D sensor found, giving up.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* query 0 contains some useful information */
|
|
ret = rmi_read(hdev, data->f11.query_base_addr, buf);
|
|
if (ret) {
|
|
hid_err(hdev, "can not get query 0: %d.\n", ret);
|
|
return ret;
|
|
}
|
|
has_query9 = !!(buf[0] & BIT(3));
|
|
has_query11 = !!(buf[0] & BIT(4));
|
|
has_query12 = !!(buf[0] & BIT(5));
|
|
has_query27 = !!(buf[0] & BIT(6));
|
|
has_query28 = !!(buf[0] & BIT(7));
|
|
|
|
/* query 1 to get the max number of fingers */
|
|
ret = rmi_read(hdev, data->f11.query_base_addr + 1, buf);
|
|
if (ret) {
|
|
hid_err(hdev, "can not get NumberOfFingers: %d.\n", ret);
|
|
return ret;
|
|
}
|
|
data->max_fingers = (buf[0] & 0x07) + 1;
|
|
if (data->max_fingers > 5)
|
|
data->max_fingers = 10;
|
|
|
|
data->f11.report_size = data->max_fingers * 5 +
|
|
DIV_ROUND_UP(data->max_fingers, 4);
|
|
|
|
if (!(buf[0] & BIT(4))) {
|
|
hid_err(hdev, "No absolute events, giving up.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
has_rel = !!(buf[0] & BIT(3));
|
|
has_gestures = !!(buf[0] & BIT(5));
|
|
|
|
ret = rmi_read(hdev, data->f11.query_base_addr + 5, buf);
|
|
if (ret) {
|
|
hid_err(hdev, "can not get absolute data sources: %d.\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
has_dribble = !!(buf[0] & BIT(4));
|
|
|
|
/*
|
|
* At least 4 queries are guaranteed to be present in F11
|
|
* +1 for query 5 which is present since absolute events are
|
|
* reported and +1 for query 12.
|
|
*/
|
|
query_offset = 6;
|
|
|
|
if (has_rel)
|
|
++query_offset; /* query 6 is present */
|
|
|
|
if (has_gestures) {
|
|
/* query 8 to find out if query 10 exists */
|
|
ret = rmi_read(hdev,
|
|
data->f11.query_base_addr + query_offset + 1, buf);
|
|
if (ret) {
|
|
hid_err(hdev, "can not read gesture information: %d.\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
has_palm_detect = !!(buf[0] & BIT(0));
|
|
has_query10 = !!(buf[0] & BIT(2));
|
|
|
|
query_offset += 2; /* query 7 and 8 are present */
|
|
}
|
|
|
|
if (has_query9)
|
|
++query_offset;
|
|
|
|
if (has_query10)
|
|
++query_offset;
|
|
|
|
if (has_query11)
|
|
++query_offset;
|
|
|
|
/* query 12 to know if the physical properties are reported */
|
|
if (has_query12) {
|
|
ret = rmi_read(hdev, data->f11.query_base_addr
|
|
+ query_offset, buf);
|
|
if (ret) {
|
|
hid_err(hdev, "can not get query 12: %d.\n", ret);
|
|
return ret;
|
|
}
|
|
has_physical_props = !!(buf[0] & BIT(5));
|
|
|
|
if (has_physical_props) {
|
|
query_offset += 1;
|
|
ret = rmi_read_block(hdev,
|
|
data->f11.query_base_addr
|
|
+ query_offset, buf, 4);
|
|
if (ret) {
|
|
hid_err(hdev, "can not read query 15-18: %d.\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
x_size = buf[0] | (buf[1] << 8);
|
|
y_size = buf[2] | (buf[3] << 8);
|
|
|
|
data->x_size_mm = DIV_ROUND_CLOSEST(x_size, 10);
|
|
data->y_size_mm = DIV_ROUND_CLOSEST(y_size, 10);
|
|
|
|
hid_info(hdev, "%s: size in mm: %d x %d\n",
|
|
__func__, data->x_size_mm, data->y_size_mm);
|
|
|
|
/*
|
|
* query 15 - 18 contain the size of the sensor
|
|
* and query 19 - 26 contain bezel dimensions
|
|
*/
|
|
query_offset += 12;
|
|
}
|
|
}
|
|
|
|
if (has_query27)
|
|
++query_offset;
|
|
|
|
if (has_query28) {
|
|
ret = rmi_read(hdev, data->f11.query_base_addr
|
|
+ query_offset, buf);
|
|
if (ret) {
|
|
hid_err(hdev, "can not get query 28: %d.\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
has_query36 = !!(buf[0] & BIT(6));
|
|
}
|
|
|
|
if (has_query36) {
|
|
query_offset += 2;
|
|
ret = rmi_read(hdev, data->f11.query_base_addr
|
|
+ query_offset, buf);
|
|
if (ret) {
|
|
hid_err(hdev, "can not get query 36: %d.\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
has_data40 = !!(buf[0] & BIT(5));
|
|
}
|
|
|
|
|
|
if (has_data40)
|
|
data->f11.report_size += data->max_fingers * 2;
|
|
|
|
/*
|
|
* retrieve the ctrl registers
|
|
* the ctrl register has a size of 20 but a fw bug split it into 16 + 4,
|
|
* and there is no way to know if the first 20 bytes are here or not.
|
|
* We use only the first 12 bytes, so get only them.
|
|
*/
|
|
ret = rmi_read_block(hdev, data->f11.control_base_addr, buf, 12);
|
|
if (ret) {
|
|
hid_err(hdev, "can not read ctrl block of size 11: %d.\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
data->max_x = buf[6] | (buf[7] << 8);
|
|
data->max_y = buf[8] | (buf[9] << 8);
|
|
|
|
if (has_dribble) {
|
|
buf[0] = buf[0] & ~BIT(6);
|
|
ret = rmi_write(hdev, data->f11.control_base_addr, buf);
|
|
if (ret) {
|
|
hid_err(hdev, "can not write to control reg 0: %d.\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
if (has_palm_detect) {
|
|
buf[11] = buf[11] & ~BIT(0);
|
|
ret = rmi_write(hdev, data->f11.control_base_addr + 11,
|
|
&buf[11]);
|
|
if (ret) {
|
|
hid_err(hdev, "can not write to control reg 11: %d.\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rmi_populate_f30(struct hid_device *hdev)
|
|
{
|
|
struct rmi_data *data = hid_get_drvdata(hdev);
|
|
u8 buf[20];
|
|
int ret;
|
|
bool has_gpio, has_led;
|
|
unsigned bytes_per_ctrl;
|
|
u8 ctrl2_addr;
|
|
int ctrl2_3_length;
|
|
int i;
|
|
|
|
/* function F30 is for physical buttons */
|
|
if (!data->f30.query_base_addr) {
|
|
hid_err(hdev, "No GPIO/LEDs found, giving up.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = rmi_read_block(hdev, data->f30.query_base_addr, buf, 2);
|
|
if (ret) {
|
|
hid_err(hdev, "can not get F30 query registers: %d.\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
has_gpio = !!(buf[0] & BIT(3));
|
|
has_led = !!(buf[0] & BIT(2));
|
|
data->gpio_led_count = buf[1] & 0x1f;
|
|
|
|
/* retrieve ctrl 2 & 3 registers */
|
|
bytes_per_ctrl = (data->gpio_led_count + 7) / 8;
|
|
/* Ctrl0 is present only if both has_gpio and has_led are set*/
|
|
ctrl2_addr = (has_gpio && has_led) ? bytes_per_ctrl : 0;
|
|
/* Ctrl1 is always be present */
|
|
ctrl2_addr += bytes_per_ctrl;
|
|
ctrl2_3_length = 2 * bytes_per_ctrl;
|
|
|
|
data->f30.report_size = bytes_per_ctrl;
|
|
|
|
ret = rmi_read_block(hdev, data->f30.control_base_addr + ctrl2_addr,
|
|
buf, ctrl2_3_length);
|
|
if (ret) {
|
|
hid_err(hdev, "can not read ctrl 2&3 block of size %d: %d.\n",
|
|
ctrl2_3_length, ret);
|
|
return ret;
|
|
}
|
|
|
|
for (i = 0; i < data->gpio_led_count; i++) {
|
|
int byte_position = i >> 3;
|
|
int bit_position = i & 0x07;
|
|
u8 dir_byte = buf[byte_position];
|
|
u8 data_byte = buf[byte_position + bytes_per_ctrl];
|
|
bool dir = (dir_byte >> bit_position) & BIT(0);
|
|
bool dat = (data_byte >> bit_position) & BIT(0);
|
|
|
|
if (dir == 0) {
|
|
/* input mode */
|
|
if (dat) {
|
|
/* actual buttons have pull up resistor */
|
|
data->button_count++;
|
|
set_bit(i, &data->button_mask);
|
|
set_bit(i, &data->button_state_mask);
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rmi_populate(struct hid_device *hdev)
|
|
{
|
|
int ret;
|
|
|
|
ret = rmi_scan_pdt(hdev);
|
|
if (ret) {
|
|
hid_err(hdev, "PDT scan failed with code %d.\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = rmi_populate_f01(hdev);
|
|
if (ret) {
|
|
hid_err(hdev, "Error while initializing F01 (%d).\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = rmi_populate_f11(hdev);
|
|
if (ret) {
|
|
hid_err(hdev, "Error while initializing F11 (%d).\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = rmi_populate_f30(hdev);
|
|
if (ret)
|
|
hid_warn(hdev, "Error while initializing F30 (%d).\n", ret);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rmi_input_configured(struct hid_device *hdev, struct hid_input *hi)
|
|
{
|
|
struct rmi_data *data = hid_get_drvdata(hdev);
|
|
struct input_dev *input = hi->input;
|
|
int ret;
|
|
int res_x, res_y, i;
|
|
|
|
data->input = input;
|
|
|
|
hid_dbg(hdev, "Opening low level driver\n");
|
|
ret = hid_hw_open(hdev);
|
|
if (ret)
|
|
return;
|
|
|
|
if (!(data->device_flags & RMI_DEVICE))
|
|
return;
|
|
|
|
/* Allow incoming hid reports */
|
|
hid_device_io_start(hdev);
|
|
|
|
ret = rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS);
|
|
if (ret < 0) {
|
|
dev_err(&hdev->dev, "failed to set rmi mode\n");
|
|
goto exit;
|
|
}
|
|
|
|
ret = rmi_set_page(hdev, 0);
|
|
if (ret < 0) {
|
|
dev_err(&hdev->dev, "failed to set page select to 0.\n");
|
|
goto exit;
|
|
}
|
|
|
|
ret = rmi_populate(hdev);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
hid_info(hdev, "firmware id: %ld\n", data->firmware_id);
|
|
|
|
__set_bit(EV_ABS, input->evbit);
|
|
input_set_abs_params(input, ABS_MT_POSITION_X, 1, data->max_x, 0, 0);
|
|
input_set_abs_params(input, ABS_MT_POSITION_Y, 1, data->max_y, 0, 0);
|
|
|
|
if (data->x_size_mm && data->y_size_mm) {
|
|
res_x = (data->max_x - 1) / data->x_size_mm;
|
|
res_y = (data->max_y - 1) / data->y_size_mm;
|
|
|
|
input_abs_set_res(input, ABS_MT_POSITION_X, res_x);
|
|
input_abs_set_res(input, ABS_MT_POSITION_Y, res_y);
|
|
}
|
|
|
|
input_set_abs_params(input, ABS_MT_ORIENTATION, 0, 1, 0, 0);
|
|
input_set_abs_params(input, ABS_MT_PRESSURE, 0, 0xff, 0, 0);
|
|
input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 0x0f, 0, 0);
|
|
input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 0x0f, 0, 0);
|
|
|
|
input_mt_init_slots(input, data->max_fingers, INPUT_MT_POINTER);
|
|
|
|
if (data->button_count) {
|
|
__set_bit(EV_KEY, input->evbit);
|
|
for (i = 0; i < data->button_count; i++)
|
|
__set_bit(BTN_LEFT + i, input->keybit);
|
|
|
|
if (data->button_count == 1)
|
|
__set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
|
|
}
|
|
|
|
set_bit(RMI_STARTED, &data->flags);
|
|
|
|
exit:
|
|
hid_device_io_stop(hdev);
|
|
hid_hw_close(hdev);
|
|
}
|
|
|
|
static int rmi_input_mapping(struct hid_device *hdev,
|
|
struct hid_input *hi, struct hid_field *field,
|
|
struct hid_usage *usage, unsigned long **bit, int *max)
|
|
{
|
|
struct rmi_data *data = hid_get_drvdata(hdev);
|
|
|
|
/*
|
|
* we want to make HID ignore the advertised HID collection
|
|
* for RMI deivces
|
|
*/
|
|
if (data->device_flags & RMI_DEVICE) {
|
|
if ((data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS) &&
|
|
((usage->hid & HID_USAGE_PAGE) == HID_UP_BUTTON))
|
|
return 0;
|
|
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rmi_check_valid_report_id(struct hid_device *hdev, unsigned type,
|
|
unsigned id, struct hid_report **report)
|
|
{
|
|
int i;
|
|
|
|
*report = hdev->report_enum[type].report_id_hash[id];
|
|
if (*report) {
|
|
for (i = 0; i < (*report)->maxfield; i++) {
|
|
unsigned app = (*report)->field[i]->application;
|
|
if ((app & HID_USAGE_PAGE) >= HID_UP_MSVENDOR)
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id)
|
|
{
|
|
struct rmi_data *data = NULL;
|
|
int ret;
|
|
size_t alloc_size;
|
|
struct hid_report *input_report;
|
|
struct hid_report *output_report;
|
|
struct hid_report *feature_report;
|
|
|
|
data = devm_kzalloc(&hdev->dev, sizeof(struct rmi_data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
INIT_WORK(&data->reset_work, rmi_reset_work);
|
|
data->hdev = hdev;
|
|
|
|
hid_set_drvdata(hdev, data);
|
|
|
|
hdev->quirks |= HID_QUIRK_NO_INIT_REPORTS;
|
|
|
|
ret = hid_parse(hdev);
|
|
if (ret) {
|
|
hid_err(hdev, "parse failed\n");
|
|
return ret;
|
|
}
|
|
|
|
if (id->driver_data)
|
|
data->device_flags = id->driver_data;
|
|
|
|
/*
|
|
* Check for the RMI specific report ids. If they are misisng
|
|
* simply return and let the events be processed by hid-input
|
|
*/
|
|
if (!rmi_check_valid_report_id(hdev, HID_FEATURE_REPORT,
|
|
RMI_SET_RMI_MODE_REPORT_ID, &feature_report)) {
|
|
hid_dbg(hdev, "device does not have set mode feature report\n");
|
|
goto start;
|
|
}
|
|
|
|
if (!rmi_check_valid_report_id(hdev, HID_INPUT_REPORT,
|
|
RMI_ATTN_REPORT_ID, &input_report)) {
|
|
hid_dbg(hdev, "device does not have attention input report\n");
|
|
goto start;
|
|
}
|
|
|
|
data->input_report_size = hid_report_len(input_report);
|
|
|
|
if (!rmi_check_valid_report_id(hdev, HID_OUTPUT_REPORT,
|
|
RMI_WRITE_REPORT_ID, &output_report)) {
|
|
hid_dbg(hdev,
|
|
"device does not have rmi write output report\n");
|
|
goto start;
|
|
}
|
|
|
|
data->output_report_size = hid_report_len(output_report);
|
|
|
|
data->device_flags |= RMI_DEVICE;
|
|
alloc_size = data->output_report_size + data->input_report_size;
|
|
|
|
data->writeReport = devm_kzalloc(&hdev->dev, alloc_size, GFP_KERNEL);
|
|
if (!data->writeReport) {
|
|
ret = -ENOMEM;
|
|
return ret;
|
|
}
|
|
|
|
data->readReport = data->writeReport + data->output_report_size;
|
|
|
|
init_waitqueue_head(&data->wait);
|
|
|
|
mutex_init(&data->page_mutex);
|
|
|
|
start:
|
|
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
|
|
if (ret) {
|
|
hid_err(hdev, "hw start failed\n");
|
|
return ret;
|
|
}
|
|
|
|
if ((data->device_flags & RMI_DEVICE) &&
|
|
!test_bit(RMI_STARTED, &data->flags))
|
|
/*
|
|
* The device maybe in the bootloader if rmi_input_configured
|
|
* failed to find F11 in the PDT. Print an error, but don't
|
|
* return an error from rmi_probe so that hidraw will be
|
|
* accessible from userspace. That way a userspace tool
|
|
* can be used to reload working firmware on the touchpad.
|
|
*/
|
|
hid_err(hdev, "Device failed to be properly configured\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rmi_remove(struct hid_device *hdev)
|
|
{
|
|
struct rmi_data *hdata = hid_get_drvdata(hdev);
|
|
|
|
clear_bit(RMI_STARTED, &hdata->flags);
|
|
|
|
hid_hw_stop(hdev);
|
|
}
|
|
|
|
static const struct hid_device_id rmi_id[] = {
|
|
{ HID_USB_DEVICE(USB_VENDOR_ID_RAZER, USB_DEVICE_ID_RAZER_BLADE_14),
|
|
.driver_data = RMI_DEVICE_HAS_PHYS_BUTTONS },
|
|
{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_RMI, HID_ANY_ID, HID_ANY_ID) },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(hid, rmi_id);
|
|
|
|
static struct hid_driver rmi_driver = {
|
|
.name = "hid-rmi",
|
|
.id_table = rmi_id,
|
|
.probe = rmi_probe,
|
|
.remove = rmi_remove,
|
|
.event = rmi_event,
|
|
.raw_event = rmi_raw_event,
|
|
.input_mapping = rmi_input_mapping,
|
|
.input_configured = rmi_input_configured,
|
|
#ifdef CONFIG_PM
|
|
.resume = rmi_post_resume,
|
|
.reset_resume = rmi_post_reset,
|
|
#endif
|
|
};
|
|
|
|
module_hid_driver(rmi_driver);
|
|
|
|
MODULE_AUTHOR("Andrew Duggan <aduggan@synaptics.com>");
|
|
MODULE_DESCRIPTION("RMI HID driver");
|
|
MODULE_LICENSE("GPL");
|