linux-stable/drivers/thermal/rcar_gen3_thermal.c
Uwe Kleine-König a07f4487bc thermal: rcar_gen3: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-09-29 12:34:17 +02:00

601 lines
15 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* R-Car Gen3 THS thermal sensor driver
* Based on rcar_thermal.c and work from Hien Dang and Khiem Nguyen.
*
* Copyright (C) 2016 Renesas Electronics Corporation.
* Copyright (C) 2016 Sang Engineering
*/
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/thermal.h>
#include "thermal_hwmon.h"
/* Register offsets */
#define REG_GEN3_IRQSTR 0x04
#define REG_GEN3_IRQMSK 0x08
#define REG_GEN3_IRQCTL 0x0C
#define REG_GEN3_IRQEN 0x10
#define REG_GEN3_IRQTEMP1 0x14
#define REG_GEN3_IRQTEMP2 0x18
#define REG_GEN3_IRQTEMP3 0x1C
#define REG_GEN3_THCTR 0x20
#define REG_GEN3_TEMP 0x28
#define REG_GEN3_THCODE1 0x50
#define REG_GEN3_THCODE2 0x54
#define REG_GEN3_THCODE3 0x58
#define REG_GEN3_PTAT1 0x5c
#define REG_GEN3_PTAT2 0x60
#define REG_GEN3_PTAT3 0x64
#define REG_GEN3_THSCP 0x68
#define REG_GEN4_THSFMON00 0x180
#define REG_GEN4_THSFMON01 0x184
#define REG_GEN4_THSFMON02 0x188
#define REG_GEN4_THSFMON15 0x1BC
#define REG_GEN4_THSFMON16 0x1C0
#define REG_GEN4_THSFMON17 0x1C4
/* IRQ{STR,MSK,EN} bits */
#define IRQ_TEMP1 BIT(0)
#define IRQ_TEMP2 BIT(1)
#define IRQ_TEMP3 BIT(2)
#define IRQ_TEMPD1 BIT(3)
#define IRQ_TEMPD2 BIT(4)
#define IRQ_TEMPD3 BIT(5)
/* THCTR bits */
#define THCTR_PONM BIT(6)
#define THCTR_THSST BIT(0)
/* THSCP bits */
#define THSCP_COR_PARA_VLD (BIT(15) | BIT(14))
#define CTEMP_MASK 0xFFF
#define MCELSIUS(temp) ((temp) * 1000)
#define GEN3_FUSE_MASK 0xFFF
#define GEN4_FUSE_MASK 0xFFF
#define TSC_MAX_NUM 5
/* Structure for thermal temperature calculation */
struct equation_coefs {
int a1;
int b1;
int a2;
int b2;
};
struct rcar_gen3_thermal_priv;
struct rcar_thermal_info {
int ths_tj_1;
void (*read_fuses)(struct rcar_gen3_thermal_priv *priv);
};
struct rcar_gen3_thermal_tsc {
void __iomem *base;
struct thermal_zone_device *zone;
struct equation_coefs coef;
int tj_t;
int thcode[3];
};
struct rcar_gen3_thermal_priv {
struct rcar_gen3_thermal_tsc *tscs[TSC_MAX_NUM];
struct thermal_zone_device_ops ops;
unsigned int num_tscs;
int ptat[3];
const struct rcar_thermal_info *info;
};
static inline u32 rcar_gen3_thermal_read(struct rcar_gen3_thermal_tsc *tsc,
u32 reg)
{
return ioread32(tsc->base + reg);
}
static inline void rcar_gen3_thermal_write(struct rcar_gen3_thermal_tsc *tsc,
u32 reg, u32 data)
{
iowrite32(data, tsc->base + reg);
}
/*
* Linear approximation for temperature
*
* [reg] = [temp] * a + b => [temp] = ([reg] - b) / a
*
* The constants a and b are calculated using two triplets of int values PTAT
* and THCODE. PTAT and THCODE can either be read from hardware or use hard
* coded values from driver. The formula to calculate a and b are taken from
* BSP and sparsely documented and understood.
*
* Examining the linear formula and the formula used to calculate constants a
* and b while knowing that the span for PTAT and THCODE values are between
* 0x000 and 0xfff the largest integer possible is 0xfff * 0xfff == 0xffe001.
* Integer also needs to be signed so that leaves 7 bits for binary
* fixed point scaling.
*/
#define FIXPT_SHIFT 7
#define FIXPT_INT(_x) ((_x) << FIXPT_SHIFT)
#define INT_FIXPT(_x) ((_x) >> FIXPT_SHIFT)
#define FIXPT_DIV(_a, _b) DIV_ROUND_CLOSEST(((_a) << FIXPT_SHIFT), (_b))
#define FIXPT_TO_MCELSIUS(_x) ((_x) * 1000 >> FIXPT_SHIFT)
#define RCAR3_THERMAL_GRAN 500 /* mili Celsius */
/* no idea where these constants come from */
#define TJ_3 -41
static void rcar_gen3_thermal_calc_coefs(struct rcar_gen3_thermal_priv *priv,
struct rcar_gen3_thermal_tsc *tsc,
int ths_tj_1)
{
/* TODO: Find documentation and document constant calculation formula */
/*
* Division is not scaled in BSP and if scaled it might overflow
* the dividend (4095 * 4095 << 14 > INT_MAX) so keep it unscaled
*/
tsc->tj_t = (FIXPT_INT((priv->ptat[1] - priv->ptat[2]) * (ths_tj_1 - TJ_3))
/ (priv->ptat[0] - priv->ptat[2])) + FIXPT_INT(TJ_3);
tsc->coef.a1 = FIXPT_DIV(FIXPT_INT(tsc->thcode[1] - tsc->thcode[2]),
tsc->tj_t - FIXPT_INT(TJ_3));
tsc->coef.b1 = FIXPT_INT(tsc->thcode[2]) - tsc->coef.a1 * TJ_3;
tsc->coef.a2 = FIXPT_DIV(FIXPT_INT(tsc->thcode[1] - tsc->thcode[0]),
tsc->tj_t - FIXPT_INT(ths_tj_1));
tsc->coef.b2 = FIXPT_INT(tsc->thcode[0]) - tsc->coef.a2 * ths_tj_1;
}
static int rcar_gen3_thermal_round(int temp)
{
int result, round_offs;
round_offs = temp >= 0 ? RCAR3_THERMAL_GRAN / 2 :
-RCAR3_THERMAL_GRAN / 2;
result = (temp + round_offs) / RCAR3_THERMAL_GRAN;
return result * RCAR3_THERMAL_GRAN;
}
static int rcar_gen3_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
{
struct rcar_gen3_thermal_tsc *tsc = thermal_zone_device_priv(tz);
int mcelsius, val;
int reg;
/* Read register and convert to mili Celsius */
reg = rcar_gen3_thermal_read(tsc, REG_GEN3_TEMP) & CTEMP_MASK;
if (reg <= tsc->thcode[1])
val = FIXPT_DIV(FIXPT_INT(reg) - tsc->coef.b1,
tsc->coef.a1);
else
val = FIXPT_DIV(FIXPT_INT(reg) - tsc->coef.b2,
tsc->coef.a2);
mcelsius = FIXPT_TO_MCELSIUS(val);
/* Guaranteed operating range is -40C to 125C. */
/* Round value to device granularity setting */
*temp = rcar_gen3_thermal_round(mcelsius);
return 0;
}
static int rcar_gen3_thermal_mcelsius_to_temp(struct rcar_gen3_thermal_tsc *tsc,
int mcelsius)
{
int celsius, val;
celsius = DIV_ROUND_CLOSEST(mcelsius, 1000);
if (celsius <= INT_FIXPT(tsc->tj_t))
val = celsius * tsc->coef.a1 + tsc->coef.b1;
else
val = celsius * tsc->coef.a2 + tsc->coef.b2;
return INT_FIXPT(val);
}
static int rcar_gen3_thermal_set_trips(struct thermal_zone_device *tz, int low, int high)
{
struct rcar_gen3_thermal_tsc *tsc = thermal_zone_device_priv(tz);
u32 irqmsk = 0;
if (low != -INT_MAX) {
irqmsk |= IRQ_TEMPD1;
rcar_gen3_thermal_write(tsc, REG_GEN3_IRQTEMP1,
rcar_gen3_thermal_mcelsius_to_temp(tsc, low));
}
if (high != INT_MAX) {
irqmsk |= IRQ_TEMP2;
rcar_gen3_thermal_write(tsc, REG_GEN3_IRQTEMP2,
rcar_gen3_thermal_mcelsius_to_temp(tsc, high));
}
rcar_gen3_thermal_write(tsc, REG_GEN3_IRQMSK, irqmsk);
return 0;
}
static const struct thermal_zone_device_ops rcar_gen3_tz_of_ops = {
.get_temp = rcar_gen3_thermal_get_temp,
.set_trips = rcar_gen3_thermal_set_trips,
};
static irqreturn_t rcar_gen3_thermal_irq(int irq, void *data)
{
struct rcar_gen3_thermal_priv *priv = data;
unsigned int i;
u32 status;
for (i = 0; i < priv->num_tscs; i++) {
status = rcar_gen3_thermal_read(priv->tscs[i], REG_GEN3_IRQSTR);
rcar_gen3_thermal_write(priv->tscs[i], REG_GEN3_IRQSTR, 0);
if (status && priv->tscs[i]->zone)
thermal_zone_device_update(priv->tscs[i]->zone,
THERMAL_EVENT_UNSPECIFIED);
}
return IRQ_HANDLED;
}
static void rcar_gen3_thermal_read_fuses_gen3(struct rcar_gen3_thermal_priv *priv)
{
unsigned int i;
/*
* Set the pseudo calibration points with fused values.
* PTAT is shared between all TSCs but only fused for the first
* TSC while THCODEs are fused for each TSC.
*/
priv->ptat[0] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN3_PTAT1) &
GEN3_FUSE_MASK;
priv->ptat[1] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN3_PTAT2) &
GEN3_FUSE_MASK;
priv->ptat[2] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN3_PTAT3) &
GEN3_FUSE_MASK;
for (i = 0; i < priv->num_tscs; i++) {
struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
tsc->thcode[0] = rcar_gen3_thermal_read(tsc, REG_GEN3_THCODE1) &
GEN3_FUSE_MASK;
tsc->thcode[1] = rcar_gen3_thermal_read(tsc, REG_GEN3_THCODE2) &
GEN3_FUSE_MASK;
tsc->thcode[2] = rcar_gen3_thermal_read(tsc, REG_GEN3_THCODE3) &
GEN3_FUSE_MASK;
}
}
static void rcar_gen3_thermal_read_fuses_gen4(struct rcar_gen3_thermal_priv *priv)
{
unsigned int i;
/*
* Set the pseudo calibration points with fused values.
* PTAT is shared between all TSCs but only fused for the first
* TSC while THCODEs are fused for each TSC.
*/
priv->ptat[0] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN4_THSFMON16) &
GEN4_FUSE_MASK;
priv->ptat[1] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN4_THSFMON17) &
GEN4_FUSE_MASK;
priv->ptat[2] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN4_THSFMON15) &
GEN4_FUSE_MASK;
for (i = 0; i < priv->num_tscs; i++) {
struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
tsc->thcode[0] = rcar_gen3_thermal_read(tsc, REG_GEN4_THSFMON01) &
GEN4_FUSE_MASK;
tsc->thcode[1] = rcar_gen3_thermal_read(tsc, REG_GEN4_THSFMON02) &
GEN4_FUSE_MASK;
tsc->thcode[2] = rcar_gen3_thermal_read(tsc, REG_GEN4_THSFMON00) &
GEN4_FUSE_MASK;
}
}
static bool rcar_gen3_thermal_read_fuses(struct rcar_gen3_thermal_priv *priv)
{
unsigned int i;
u32 thscp;
/* If fuses are not set, fallback to pseudo values. */
thscp = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN3_THSCP);
if (!priv->info->read_fuses ||
(thscp & THSCP_COR_PARA_VLD) != THSCP_COR_PARA_VLD) {
/* Default THCODE values in case FUSEs are not set. */
static const int thcodes[TSC_MAX_NUM][3] = {
{ 3397, 2800, 2221 },
{ 3393, 2795, 2216 },
{ 3389, 2805, 2237 },
{ 3415, 2694, 2195 },
{ 3356, 2724, 2244 },
};
priv->ptat[0] = 2631;
priv->ptat[1] = 1509;
priv->ptat[2] = 435;
for (i = 0; i < priv->num_tscs; i++) {
struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
tsc->thcode[0] = thcodes[i][0];
tsc->thcode[1] = thcodes[i][1];
tsc->thcode[2] = thcodes[i][2];
}
return false;
}
priv->info->read_fuses(priv);
return true;
}
static void rcar_gen3_thermal_init(struct rcar_gen3_thermal_priv *priv,
struct rcar_gen3_thermal_tsc *tsc)
{
u32 reg_val;
reg_val = rcar_gen3_thermal_read(tsc, REG_GEN3_THCTR);
reg_val &= ~THCTR_PONM;
rcar_gen3_thermal_write(tsc, REG_GEN3_THCTR, reg_val);
usleep_range(1000, 2000);
rcar_gen3_thermal_write(tsc, REG_GEN3_IRQCTL, 0);
rcar_gen3_thermal_write(tsc, REG_GEN3_IRQMSK, 0);
if (priv->ops.set_trips)
rcar_gen3_thermal_write(tsc, REG_GEN3_IRQEN,
IRQ_TEMPD1 | IRQ_TEMP2);
reg_val = rcar_gen3_thermal_read(tsc, REG_GEN3_THCTR);
reg_val |= THCTR_THSST;
rcar_gen3_thermal_write(tsc, REG_GEN3_THCTR, reg_val);
usleep_range(1000, 2000);
}
static const struct rcar_thermal_info rcar_m3w_thermal_info = {
.ths_tj_1 = 116,
.read_fuses = rcar_gen3_thermal_read_fuses_gen3,
};
static const struct rcar_thermal_info rcar_gen3_thermal_info = {
.ths_tj_1 = 126,
.read_fuses = rcar_gen3_thermal_read_fuses_gen3,
};
static const struct rcar_thermal_info rcar_gen4_thermal_info = {
.ths_tj_1 = 126,
.read_fuses = rcar_gen3_thermal_read_fuses_gen4,
};
static const struct of_device_id rcar_gen3_thermal_dt_ids[] = {
{
.compatible = "renesas,r8a774a1-thermal",
.data = &rcar_m3w_thermal_info,
},
{
.compatible = "renesas,r8a774b1-thermal",
.data = &rcar_gen3_thermal_info,
},
{
.compatible = "renesas,r8a774e1-thermal",
.data = &rcar_gen3_thermal_info,
},
{
.compatible = "renesas,r8a7795-thermal",
.data = &rcar_gen3_thermal_info,
},
{
.compatible = "renesas,r8a7796-thermal",
.data = &rcar_m3w_thermal_info,
},
{
.compatible = "renesas,r8a77961-thermal",
.data = &rcar_m3w_thermal_info,
},
{
.compatible = "renesas,r8a77965-thermal",
.data = &rcar_gen3_thermal_info,
},
{
.compatible = "renesas,r8a77980-thermal",
.data = &rcar_gen3_thermal_info,
},
{
.compatible = "renesas,r8a779a0-thermal",
.data = &rcar_gen3_thermal_info,
},
{
.compatible = "renesas,r8a779f0-thermal",
.data = &rcar_gen4_thermal_info,
},
{
.compatible = "renesas,r8a779g0-thermal",
.data = &rcar_gen4_thermal_info,
},
{},
};
MODULE_DEVICE_TABLE(of, rcar_gen3_thermal_dt_ids);
static void rcar_gen3_thermal_remove(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
pm_runtime_put(dev);
pm_runtime_disable(dev);
}
static void rcar_gen3_hwmon_action(void *data)
{
struct thermal_zone_device *zone = data;
thermal_remove_hwmon_sysfs(zone);
}
static int rcar_gen3_thermal_request_irqs(struct rcar_gen3_thermal_priv *priv,
struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
unsigned int i;
char *irqname;
int ret, irq;
for (i = 0; i < 2; i++) {
irq = platform_get_irq_optional(pdev, i);
if (irq < 0)
return irq;
irqname = devm_kasprintf(dev, GFP_KERNEL, "%s:ch%d",
dev_name(dev), i);
if (!irqname)
return -ENOMEM;
ret = devm_request_threaded_irq(dev, irq, NULL,
rcar_gen3_thermal_irq,
IRQF_ONESHOT, irqname, priv);
if (ret)
return ret;
}
return 0;
}
static int rcar_gen3_thermal_probe(struct platform_device *pdev)
{
struct rcar_gen3_thermal_priv *priv;
struct device *dev = &pdev->dev;
struct resource *res;
struct thermal_zone_device *zone;
unsigned int i;
int ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->ops = rcar_gen3_tz_of_ops;
priv->info = of_device_get_match_data(dev);
platform_set_drvdata(pdev, priv);
if (rcar_gen3_thermal_request_irqs(priv, pdev))
priv->ops.set_trips = NULL;
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
for (i = 0; i < TSC_MAX_NUM; i++) {
struct rcar_gen3_thermal_tsc *tsc;
res = platform_get_resource(pdev, IORESOURCE_MEM, i);
if (!res)
break;
tsc = devm_kzalloc(dev, sizeof(*tsc), GFP_KERNEL);
if (!tsc) {
ret = -ENOMEM;
goto error_unregister;
}
tsc->base = devm_ioremap_resource(dev, res);
if (IS_ERR(tsc->base)) {
ret = PTR_ERR(tsc->base);
goto error_unregister;
}
priv->tscs[i] = tsc;
}
priv->num_tscs = i;
if (!rcar_gen3_thermal_read_fuses(priv))
dev_info(dev, "No calibration values fused, fallback to driver values\n");
for (i = 0; i < priv->num_tscs; i++) {
struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
rcar_gen3_thermal_init(priv, tsc);
rcar_gen3_thermal_calc_coefs(priv, tsc, priv->info->ths_tj_1);
zone = devm_thermal_of_zone_register(dev, i, tsc, &priv->ops);
if (IS_ERR(zone)) {
dev_err(dev, "Sensor %u: Can't register thermal zone\n", i);
ret = PTR_ERR(zone);
goto error_unregister;
}
tsc->zone = zone;
ret = thermal_add_hwmon_sysfs(tsc->zone);
if (ret)
goto error_unregister;
ret = devm_add_action_or_reset(dev, rcar_gen3_hwmon_action, zone);
if (ret)
goto error_unregister;
ret = thermal_zone_get_num_trips(tsc->zone);
if (ret < 0)
goto error_unregister;
dev_info(dev, "Sensor %u: Loaded %d trip points\n", i, ret);
}
if (!priv->num_tscs) {
ret = -ENODEV;
goto error_unregister;
}
return 0;
error_unregister:
rcar_gen3_thermal_remove(pdev);
return ret;
}
static int __maybe_unused rcar_gen3_thermal_resume(struct device *dev)
{
struct rcar_gen3_thermal_priv *priv = dev_get_drvdata(dev);
unsigned int i;
for (i = 0; i < priv->num_tscs; i++) {
struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
rcar_gen3_thermal_init(priv, tsc);
}
return 0;
}
static SIMPLE_DEV_PM_OPS(rcar_gen3_thermal_pm_ops, NULL,
rcar_gen3_thermal_resume);
static struct platform_driver rcar_gen3_thermal_driver = {
.driver = {
.name = "rcar_gen3_thermal",
.pm = &rcar_gen3_thermal_pm_ops,
.of_match_table = rcar_gen3_thermal_dt_ids,
},
.probe = rcar_gen3_thermal_probe,
.remove_new = rcar_gen3_thermal_remove,
};
module_platform_driver(rcar_gen3_thermal_driver);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("R-Car Gen3 THS thermal sensor driver");
MODULE_AUTHOR("Wolfram Sang <wsa+renesas@sang-engineering.com>");