mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 17:30:02 +00:00
![Tejun Heo](/assets/img/avatar_default.png)
Many LLDs are missing sht->slave_destroy. The method is mandatory to support device warm unplugging (echo 1 > /sys/.../delete). Without it, libata might access released scsi device. Signed-off-by: Tejun Heo <htejun@gmail.com>
228 lines
5.9 KiB
C
228 lines
5.9 KiB
C
/*
|
|
* pata_hpt3x3 - HPT3x3 driver
|
|
* (c) Copyright 2005-2006 Red Hat
|
|
*
|
|
* Was pata_hpt34x but the naming was confusing as it supported the
|
|
* 343 and 363 so it has been renamed.
|
|
*
|
|
* Based on:
|
|
* linux/drivers/ide/pci/hpt34x.c Version 0.40 Sept 10, 2002
|
|
* Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
|
|
*
|
|
* May be copied or modified under the terms of the GNU General Public
|
|
* License
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
|
|
#define DRV_NAME "pata_hpt3x3"
|
|
#define DRV_VERSION "0.4.1"
|
|
|
|
static int hpt3x3_probe_init(struct ata_port *ap)
|
|
{
|
|
ap->cbl = ATA_CBL_PATA40;
|
|
return ata_std_prereset(ap);
|
|
}
|
|
|
|
/**
|
|
* hpt3x3_probe_reset - reset the hpt3x3 bus
|
|
* @ap: ATA port to reset
|
|
*
|
|
* Perform the housekeeping when doing an ATA bus reeset. We just
|
|
* need to force the cable type.
|
|
*/
|
|
|
|
static void hpt3x3_error_handler(struct ata_port *ap)
|
|
{
|
|
return ata_bmdma_drive_eh(ap, hpt3x3_probe_init, ata_std_softreset, NULL, ata_std_postreset);
|
|
}
|
|
|
|
/**
|
|
* hpt3x3_set_piomode - PIO setup
|
|
* @ap: ATA interface
|
|
* @adev: device on the interface
|
|
*
|
|
* Set our PIO requirements. This is fairly simple on the HPT3x3 as
|
|
* all we have to do is clear the MWDMA and UDMA bits then load the
|
|
* mode number.
|
|
*/
|
|
|
|
static void hpt3x3_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
u32 r1, r2;
|
|
int dn = 2 * ap->port_no + adev->devno;
|
|
|
|
pci_read_config_dword(pdev, 0x44, &r1);
|
|
pci_read_config_dword(pdev, 0x48, &r2);
|
|
/* Load the PIO timing number */
|
|
r1 &= ~(7 << (3 * dn));
|
|
r1 |= (adev->pio_mode - XFER_PIO_0) << (3 * dn);
|
|
r2 &= ~(0x11 << dn); /* Clear MWDMA and UDMA bits */
|
|
|
|
pci_write_config_dword(pdev, 0x44, r1);
|
|
pci_write_config_dword(pdev, 0x48, r2);
|
|
}
|
|
|
|
/**
|
|
* hpt3x3_set_dmamode - DMA timing setup
|
|
* @ap: ATA interface
|
|
* @adev: Device being configured
|
|
*
|
|
* Set up the channel for MWDMA or UDMA modes. Much the same as with
|
|
* PIO, load the mode number and then set MWDMA or UDMA flag.
|
|
*/
|
|
|
|
static void hpt3x3_set_dmamode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
u32 r1, r2;
|
|
int dn = 2 * ap->port_no + adev->devno;
|
|
int mode_num = adev->dma_mode & 0x0F;
|
|
|
|
pci_read_config_dword(pdev, 0x44, &r1);
|
|
pci_read_config_dword(pdev, 0x48, &r2);
|
|
/* Load the timing number */
|
|
r1 &= ~(7 << (3 * dn));
|
|
r1 |= (mode_num << (3 * dn));
|
|
r2 &= ~(0x11 << dn); /* Clear MWDMA and UDMA bits */
|
|
|
|
if (adev->dma_mode >= XFER_UDMA_0)
|
|
r2 |= 0x01 << dn; /* Ultra mode */
|
|
else
|
|
r2 |= 0x10 << dn; /* MWDMA */
|
|
|
|
pci_write_config_dword(pdev, 0x44, r1);
|
|
pci_write_config_dword(pdev, 0x48, r2);
|
|
}
|
|
|
|
static struct scsi_host_template hpt3x3_sht = {
|
|
.module = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
.ioctl = ata_scsi_ioctl,
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
.can_queue = ATA_DEF_QUEUE,
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
.sg_tablesize = LIBATA_MAX_PRD,
|
|
.max_sectors = ATA_MAX_SECTORS,
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
.emulated = ATA_SHT_EMULATED,
|
|
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
.proc_name = DRV_NAME,
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
.slave_configure = ata_scsi_slave_config,
|
|
.slave_destroy = ata_scsi_slave_destroy,
|
|
.bios_param = ata_std_bios_param,
|
|
};
|
|
|
|
static struct ata_port_operations hpt3x3_port_ops = {
|
|
.port_disable = ata_port_disable,
|
|
.set_piomode = hpt3x3_set_piomode,
|
|
.set_dmamode = hpt3x3_set_dmamode,
|
|
.mode_filter = ata_pci_default_filter,
|
|
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = ata_exec_command,
|
|
.dev_select = ata_std_dev_select,
|
|
|
|
.freeze = ata_bmdma_freeze,
|
|
.thaw = ata_bmdma_thaw,
|
|
.error_handler = hpt3x3_error_handler,
|
|
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
|
|
|
.bmdma_setup = ata_bmdma_setup,
|
|
.bmdma_start = ata_bmdma_start,
|
|
.bmdma_stop = ata_bmdma_stop,
|
|
.bmdma_status = ata_bmdma_status,
|
|
|
|
.qc_prep = ata_qc_prep,
|
|
.qc_issue = ata_qc_issue_prot,
|
|
|
|
.data_xfer = ata_pio_data_xfer,
|
|
|
|
.irq_handler = ata_interrupt,
|
|
.irq_clear = ata_bmdma_irq_clear,
|
|
|
|
.port_start = ata_port_start,
|
|
.port_stop = ata_port_stop,
|
|
.host_stop = ata_host_stop
|
|
};
|
|
|
|
/**
|
|
* hpt3x3_init_one - Initialise an HPT343/363
|
|
* @dev: PCI device
|
|
* @id: Entry in match table
|
|
*
|
|
* Perform basic initialisation. The chip has a quirk that it won't
|
|
* function unless it is at XX00. The old ATA driver touched this up
|
|
* but we leave it for pci quirks to do properly.
|
|
*/
|
|
|
|
static int hpt3x3_init_one(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
static struct ata_port_info info = {
|
|
.sht = &hpt3x3_sht,
|
|
.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
|
|
.pio_mask = 0x1f,
|
|
.mwdma_mask = 0x07,
|
|
.udma_mask = 0x07,
|
|
.port_ops = &hpt3x3_port_ops
|
|
};
|
|
static struct ata_port_info *port_info[2] = { &info, &info };
|
|
u16 cmd;
|
|
|
|
/* Initialize the board */
|
|
pci_write_config_word(dev, 0x80, 0x00);
|
|
/* Check if it is a 343 or a 363. 363 has COMMAND_MEMORY set */
|
|
pci_read_config_word(dev, PCI_COMMAND, &cmd);
|
|
if (cmd & PCI_COMMAND_MEMORY)
|
|
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xF0);
|
|
else
|
|
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
|
|
|
|
/* Now kick off ATA set up */
|
|
return ata_pci_init_one(dev, port_info, 2);
|
|
}
|
|
|
|
static const struct pci_device_id hpt3x3[] = {
|
|
{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT343), },
|
|
|
|
{ },
|
|
};
|
|
|
|
static struct pci_driver hpt3x3_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = hpt3x3,
|
|
.probe = hpt3x3_init_one,
|
|
.remove = ata_pci_remove_one
|
|
};
|
|
|
|
static int __init hpt3x3_init(void)
|
|
{
|
|
return pci_register_driver(&hpt3x3_pci_driver);
|
|
}
|
|
|
|
|
|
static void __exit hpt3x3_exit(void)
|
|
{
|
|
pci_unregister_driver(&hpt3x3_pci_driver);
|
|
}
|
|
|
|
|
|
MODULE_AUTHOR("Alan Cox");
|
|
MODULE_DESCRIPTION("low-level driver for the Highpoint HPT343/363");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, hpt3x3);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
module_init(hpt3x3_init);
|
|
module_exit(hpt3x3_exit);
|