mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-12 05:48:40 +00:00
![Peng Ma](/assets/img/avatar_default.png)
DPPA2(Data Path Acceleration Architecture 2) qDMA supports virtualized channel by allowing DMA jobs to be enqueued into different work queues. Core can initiate a DMA transaction by preparing a frame descriptor(FD) for each DMA job and enqueuing this job through a hardware portal. DPAA2 components can also prepare a FD and enqueue a DMA job through a hardware portal. The qDMA prefetches DMA jobs through DPAA2 hardware portal. It then schedules and dispatches to internal DMA hardware engines, which generate read and write requests. Both qDMA source data and destination data can be either contiguous or non-contiguous using one or more scatter/gather tables. The qDMA supports global bandwidth flow control where all DMA transactions are stalled if the bandwidth threshold has been reached. Also supported are transaction based read throttling. Add NXP dppa2 qDMA to support some of Layerscape SoCs. such as: LS1088A, LS208xA, LX2, etc. Signed-off-by: Peng Ma <peng.ma@nxp.com> Link: https://lore.kernel.org/r/20190930020440.7754-2-peng.ma@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
700 lines
20 KiB
Text
700 lines
20 KiB
Text
# SPDX-License-Identifier: GPL-2.0-only
|
|
#
|
|
# DMA engine configuration
|
|
#
|
|
|
|
menuconfig DMADEVICES
|
|
bool "DMA Engine support"
|
|
depends on HAS_DMA
|
|
help
|
|
DMA engines can do asynchronous data transfers without
|
|
involving the host CPU. Currently, this framework can be
|
|
used to offload memory copies in the network stack and
|
|
RAID operations in the MD driver. This menu only presents
|
|
DMA Device drivers supported by the configured arch, it may
|
|
be empty in some cases.
|
|
|
|
config DMADEVICES_DEBUG
|
|
bool "DMA Engine debugging"
|
|
depends on DMADEVICES != n
|
|
help
|
|
This is an option for use by developers; most people should
|
|
say N here. This enables DMA engine core and driver debugging.
|
|
|
|
config DMADEVICES_VDEBUG
|
|
bool "DMA Engine verbose debugging"
|
|
depends on DMADEVICES_DEBUG != n
|
|
help
|
|
This is an option for use by developers; most people should
|
|
say N here. This enables deeper (more verbose) debugging of
|
|
the DMA engine core and drivers.
|
|
|
|
|
|
if DMADEVICES
|
|
|
|
comment "DMA Devices"
|
|
|
|
#core
|
|
config ASYNC_TX_ENABLE_CHANNEL_SWITCH
|
|
bool
|
|
|
|
config ARCH_HAS_ASYNC_TX_FIND_CHANNEL
|
|
bool
|
|
|
|
config DMA_ENGINE
|
|
bool
|
|
|
|
config DMA_VIRTUAL_CHANNELS
|
|
tristate
|
|
|
|
config DMA_ACPI
|
|
def_bool y
|
|
depends on ACPI
|
|
|
|
config DMA_OF
|
|
def_bool y
|
|
depends on OF
|
|
select DMA_ENGINE
|
|
|
|
#devices
|
|
config ALTERA_MSGDMA
|
|
tristate "Altera / Intel mSGDMA Engine"
|
|
select DMA_ENGINE
|
|
help
|
|
Enable support for Altera / Intel mSGDMA controller.
|
|
|
|
config AMBA_PL08X
|
|
bool "ARM PrimeCell PL080 or PL081 support"
|
|
depends on ARM_AMBA
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Say yes if your platform has a PL08x DMAC device which can
|
|
provide DMA engine support. This includes the original ARM
|
|
PL080 and PL081, Samsungs PL080 derivative and Faraday
|
|
Technology's FTDMAC020 PL080 derivative.
|
|
|
|
config AMCC_PPC440SPE_ADMA
|
|
tristate "AMCC PPC440SPe ADMA support"
|
|
depends on 440SPe || 440SP
|
|
select DMA_ENGINE
|
|
select DMA_ENGINE_RAID
|
|
select ARCH_HAS_ASYNC_TX_FIND_CHANNEL
|
|
select ASYNC_TX_ENABLE_CHANNEL_SWITCH
|
|
help
|
|
Enable support for the AMCC PPC440SPe RAID engines.
|
|
|
|
config AT_HDMAC
|
|
tristate "Atmel AHB DMA support"
|
|
depends on ARCH_AT91
|
|
select DMA_ENGINE
|
|
help
|
|
Support the Atmel AHB DMA controller.
|
|
|
|
config AT_XDMAC
|
|
tristate "Atmel XDMA support"
|
|
depends on ARCH_AT91
|
|
select DMA_ENGINE
|
|
help
|
|
Support the Atmel XDMA controller.
|
|
|
|
config AXI_DMAC
|
|
tristate "Analog Devices AXI-DMAC DMA support"
|
|
depends on MICROBLAZE || NIOS2 || ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_SOCFPGA || COMPILE_TEST
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
select REGMAP_MMIO
|
|
help
|
|
Enable support for the Analog Devices AXI-DMAC peripheral. This DMA
|
|
controller is often used in Analog Device's reference designs for FPGA
|
|
platforms.
|
|
|
|
config BCM_SBA_RAID
|
|
tristate "Broadcom SBA RAID engine support"
|
|
depends on ARM64 || COMPILE_TEST
|
|
depends on MAILBOX && RAID6_PQ
|
|
select DMA_ENGINE
|
|
select DMA_ENGINE_RAID
|
|
select ASYNC_TX_DISABLE_XOR_VAL_DMA
|
|
select ASYNC_TX_DISABLE_PQ_VAL_DMA
|
|
default m if ARCH_BCM_IPROC
|
|
help
|
|
Enable support for Broadcom SBA RAID Engine. The SBA RAID
|
|
engine is available on most of the Broadcom iProc SoCs. It
|
|
has the capability to offload memcpy, xor and pq computation
|
|
for raid5/6.
|
|
|
|
config COH901318
|
|
bool "ST-Ericsson COH901318 DMA support"
|
|
select DMA_ENGINE
|
|
depends on ARCH_U300 || COMPILE_TEST
|
|
help
|
|
Enable support for ST-Ericsson COH 901 318 DMA.
|
|
|
|
config DMA_BCM2835
|
|
tristate "BCM2835 DMA engine support"
|
|
depends on ARCH_BCM2835
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
|
|
config DMA_JZ4780
|
|
tristate "JZ4780 DMA support"
|
|
depends on MIPS || COMPILE_TEST
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
This selects support for the DMA controller in Ingenic JZ4780 SoCs.
|
|
If you have a board based on such a SoC and wish to use DMA for
|
|
devices which can use the DMA controller, say Y or M here.
|
|
|
|
config DMA_SA11X0
|
|
tristate "SA-11x0 DMA support"
|
|
depends on ARCH_SA1100 || COMPILE_TEST
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Support the DMA engine found on Intel StrongARM SA-1100 and
|
|
SA-1110 SoCs. This DMA engine can only be used with on-chip
|
|
devices.
|
|
|
|
config DMA_SUN4I
|
|
tristate "Allwinner A10 DMA SoCs support"
|
|
depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
|
|
default (MACH_SUN4I || MACH_SUN5I || MACH_SUN7I)
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Enable support for the DMA controller present in the sun4i,
|
|
sun5i and sun7i Allwinner ARM SoCs.
|
|
|
|
config DMA_SUN6I
|
|
tristate "Allwinner A31 SoCs DMA support"
|
|
depends on MACH_SUN6I || MACH_SUN8I || (ARM64 && ARCH_SUNXI) || COMPILE_TEST
|
|
depends on RESET_CONTROLLER
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Support for the DMA engine first found in Allwinner A31 SoCs.
|
|
|
|
config DW_AXI_DMAC
|
|
tristate "Synopsys DesignWare AXI DMA support"
|
|
depends on OF || COMPILE_TEST
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Enable support for Synopsys DesignWare AXI DMA controller.
|
|
NOTE: This driver wasn't tested on 64 bit platform because
|
|
of lack 64 bit platform with Synopsys DW AXI DMAC.
|
|
|
|
config EP93XX_DMA
|
|
bool "Cirrus Logic EP93xx DMA support"
|
|
depends on ARCH_EP93XX || COMPILE_TEST
|
|
select DMA_ENGINE
|
|
help
|
|
Enable support for the Cirrus Logic EP93xx M2P/M2M DMA controller.
|
|
|
|
config FSL_DMA
|
|
tristate "Freescale Elo series DMA support"
|
|
depends on FSL_SOC
|
|
select DMA_ENGINE
|
|
select ASYNC_TX_ENABLE_CHANNEL_SWITCH
|
|
---help---
|
|
Enable support for the Freescale Elo series DMA controllers.
|
|
The Elo is the DMA controller on some mpc82xx and mpc83xx parts, the
|
|
EloPlus is on mpc85xx and mpc86xx and Pxxx parts, and the Elo3 is on
|
|
some Txxx and Bxxx parts.
|
|
|
|
config FSL_EDMA
|
|
tristate "Freescale eDMA engine support"
|
|
depends on OF
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Support the Freescale eDMA engine with programmable channel
|
|
multiplexing capability for DMA request sources(slot).
|
|
This module can be found on Freescale Vybrid and LS-1 SoCs.
|
|
|
|
config FSL_QDMA
|
|
tristate "NXP Layerscape qDMA engine support"
|
|
depends on ARM || ARM64
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
select DMA_ENGINE_RAID
|
|
select ASYNC_TX_ENABLE_CHANNEL_SWITCH
|
|
help
|
|
Support the NXP Layerscape qDMA engine with command queue and legacy mode.
|
|
Channel virtualization is supported through enqueuing of DMA jobs to,
|
|
or dequeuing DMA jobs from, different work queues.
|
|
This module can be found on NXP Layerscape SoCs.
|
|
The qdma driver only work on SoCs with a DPAA hardware block.
|
|
|
|
config FSL_RAID
|
|
tristate "Freescale RAID engine Support"
|
|
depends on FSL_SOC && !ASYNC_TX_ENABLE_CHANNEL_SWITCH
|
|
select DMA_ENGINE
|
|
select DMA_ENGINE_RAID
|
|
---help---
|
|
Enable support for Freescale RAID Engine. RAID Engine is
|
|
available on some QorIQ SoCs (like P5020/P5040). It has
|
|
the capability to offload memcpy, xor and pq computation
|
|
for raid5/6.
|
|
|
|
config IMG_MDC_DMA
|
|
tristate "IMG MDC support"
|
|
depends on MIPS || COMPILE_TEST
|
|
depends on MFD_SYSCON
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Enable support for the IMG multi-threaded DMA controller (MDC).
|
|
|
|
config IMX_DMA
|
|
tristate "i.MX DMA support"
|
|
depends on ARCH_MXC
|
|
select DMA_ENGINE
|
|
help
|
|
Support the i.MX DMA engine. This engine is integrated into
|
|
Freescale i.MX1/21/27 chips.
|
|
|
|
config IMX_SDMA
|
|
tristate "i.MX SDMA support"
|
|
depends on ARCH_MXC
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Support the i.MX SDMA engine. This engine is integrated into
|
|
Freescale i.MX25/31/35/51/53/6 chips.
|
|
|
|
config INTEL_IDMA64
|
|
tristate "Intel integrated DMA 64-bit support"
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Enable DMA support for Intel Low Power Subsystem such as found on
|
|
Intel Skylake PCH.
|
|
|
|
config INTEL_IOATDMA
|
|
tristate "Intel I/OAT DMA support"
|
|
depends on PCI && X86_64
|
|
select DMA_ENGINE
|
|
select DMA_ENGINE_RAID
|
|
select DCA
|
|
help
|
|
Enable support for the Intel(R) I/OAT DMA engine present
|
|
in recent Intel Xeon chipsets.
|
|
|
|
Say Y here if you have such a chipset.
|
|
|
|
If unsure, say N.
|
|
|
|
config INTEL_IOP_ADMA
|
|
tristate "Intel IOP32x ADMA support"
|
|
depends on ARCH_IOP32X || COMPILE_TEST
|
|
select DMA_ENGINE
|
|
select ASYNC_TX_ENABLE_CHANNEL_SWITCH
|
|
help
|
|
Enable support for the Intel(R) IOP Series RAID engines.
|
|
|
|
config INTEL_MIC_X100_DMA
|
|
tristate "Intel MIC X100 DMA Driver"
|
|
depends on 64BIT && X86 && INTEL_MIC_BUS
|
|
select DMA_ENGINE
|
|
help
|
|
This enables DMA support for the Intel Many Integrated Core
|
|
(MIC) family of PCIe form factor coprocessor X100 devices that
|
|
run a 64 bit Linux OS. This driver will be used by both MIC
|
|
host and card drivers.
|
|
|
|
If you are building host kernel with a MIC device or a card
|
|
kernel for a MIC device, then say M (recommended) or Y, else
|
|
say N. If unsure say N.
|
|
|
|
More information about the Intel MIC family as well as the Linux
|
|
OS and tools for MIC to use with this driver are available from
|
|
<http://software.intel.com/en-us/mic-developer>.
|
|
|
|
config K3_DMA
|
|
tristate "Hisilicon K3 DMA support"
|
|
depends on ARCH_HI3xxx || ARCH_HISI || COMPILE_TEST
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Support the DMA engine for Hisilicon K3 platform
|
|
devices.
|
|
|
|
config LPC18XX_DMAMUX
|
|
bool "NXP LPC18xx/43xx DMA MUX for PL080"
|
|
depends on ARCH_LPC18XX || COMPILE_TEST
|
|
depends on OF && AMBA_PL08X
|
|
select MFD_SYSCON
|
|
help
|
|
Enable support for DMA on NXP LPC18xx/43xx platforms
|
|
with PL080 and multiplexed DMA request lines.
|
|
|
|
config MCF_EDMA
|
|
tristate "Freescale eDMA engine support, ColdFire mcf5441x SoCs"
|
|
depends on M5441x || COMPILE_TEST
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Support the Freescale ColdFire eDMA engine, 64-channel
|
|
implementation that performs complex data transfers with
|
|
minimal intervention from a host processor.
|
|
This module can be found on Freescale ColdFire mcf5441x SoCs.
|
|
|
|
config MMP_PDMA
|
|
bool "MMP PDMA support"
|
|
depends on ARCH_MMP || ARCH_PXA || COMPILE_TEST
|
|
select DMA_ENGINE
|
|
help
|
|
Support the MMP PDMA engine for PXA and MMP platform.
|
|
|
|
config MMP_TDMA
|
|
bool "MMP Two-Channel DMA support"
|
|
depends on ARCH_MMP || COMPILE_TEST
|
|
select DMA_ENGINE
|
|
select MMP_SRAM if ARCH_MMP
|
|
select GENERIC_ALLOCATOR
|
|
help
|
|
Support the MMP Two-Channel DMA engine.
|
|
This engine used for MMP Audio DMA and pxa910 SQU.
|
|
It needs sram driver under mach-mmp.
|
|
|
|
config MOXART_DMA
|
|
tristate "MOXART DMA support"
|
|
depends on ARCH_MOXART
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Enable support for the MOXA ART SoC DMA controller.
|
|
|
|
Say Y here if you enabled MMP ADMA, otherwise say N.
|
|
|
|
config MPC512X_DMA
|
|
tristate "Freescale MPC512x built-in DMA engine support"
|
|
depends on PPC_MPC512x || PPC_MPC831x
|
|
select DMA_ENGINE
|
|
---help---
|
|
Enable support for the Freescale MPC512x built-in DMA engine.
|
|
|
|
config MV_XOR
|
|
bool "Marvell XOR engine support"
|
|
depends on PLAT_ORION || ARCH_MVEBU || COMPILE_TEST
|
|
select DMA_ENGINE
|
|
select DMA_ENGINE_RAID
|
|
select ASYNC_TX_ENABLE_CHANNEL_SWITCH
|
|
---help---
|
|
Enable support for the Marvell XOR engine.
|
|
|
|
config MV_XOR_V2
|
|
bool "Marvell XOR engine version 2 support "
|
|
depends on ARM64
|
|
select DMA_ENGINE
|
|
select DMA_ENGINE_RAID
|
|
select ASYNC_TX_ENABLE_CHANNEL_SWITCH
|
|
select GENERIC_MSI_IRQ_DOMAIN
|
|
---help---
|
|
Enable support for the Marvell version 2 XOR engine.
|
|
|
|
This engine provides acceleration for copy, XOR and RAID6
|
|
operations, and is available on Marvell Armada 7K and 8K
|
|
platforms.
|
|
|
|
config MXS_DMA
|
|
bool "MXS DMA support"
|
|
depends on ARCH_MXS || ARCH_MXC || COMPILE_TEST
|
|
select STMP_DEVICE
|
|
select DMA_ENGINE
|
|
help
|
|
Support the MXS DMA engine. This engine including APBH-DMA
|
|
and APBX-DMA is integrated into some Freescale chips.
|
|
|
|
config MX3_IPU
|
|
bool "MX3x Image Processing Unit support"
|
|
depends on ARCH_MXC
|
|
select DMA_ENGINE
|
|
default y
|
|
help
|
|
If you plan to use the Image Processing unit in the i.MX3x, say
|
|
Y here. If unsure, select Y.
|
|
|
|
config MX3_IPU_IRQS
|
|
int "Number of dynamically mapped interrupts for IPU"
|
|
depends on MX3_IPU
|
|
range 2 137
|
|
default 4
|
|
help
|
|
Out of 137 interrupt sources on i.MX31 IPU only very few are used.
|
|
To avoid bloating the irq_desc[] array we allocate a sufficient
|
|
number of IRQ slots and map them dynamically to specific sources.
|
|
|
|
config NBPFAXI_DMA
|
|
tristate "Renesas Type-AXI NBPF DMA support"
|
|
select DMA_ENGINE
|
|
depends on ARM || COMPILE_TEST
|
|
help
|
|
Support for "Type-AXI" NBPF DMA IPs from Renesas
|
|
|
|
config OWL_DMA
|
|
tristate "Actions Semi Owl SoCs DMA support"
|
|
depends on ARCH_ACTIONS
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Enable support for the Actions Semi Owl SoCs DMA controller.
|
|
|
|
config PCH_DMA
|
|
tristate "Intel EG20T PCH / LAPIS Semicon IOH(ML7213/ML7223/ML7831) DMA"
|
|
depends on PCI && (X86_32 || COMPILE_TEST)
|
|
select DMA_ENGINE
|
|
help
|
|
Enable support for Intel EG20T PCH DMA engine.
|
|
|
|
This driver also can be used for LAPIS Semiconductor IOH(Input/
|
|
Output Hub), ML7213, ML7223 and ML7831.
|
|
ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
|
|
for MP(Media Phone) use and ML7831 IOH is for general purpose use.
|
|
ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
|
|
ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
|
|
|
|
config PL330_DMA
|
|
tristate "DMA API Driver for PL330"
|
|
select DMA_ENGINE
|
|
depends on ARM_AMBA
|
|
help
|
|
Select if your platform has one or more PL330 DMACs.
|
|
You need to provide platform specific settings via
|
|
platform_data for a dma-pl330 device.
|
|
|
|
config PXA_DMA
|
|
bool "PXA DMA support"
|
|
depends on (ARCH_MMP || ARCH_PXA)
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Support the DMA engine for PXA. It is also compatible with MMP PDMA
|
|
platform. The internal DMA IP of all PXA variants is supported, with
|
|
16 to 32 channels for peripheral to memory or memory to memory
|
|
transfers.
|
|
|
|
config SIRF_DMA
|
|
tristate "CSR SiRFprimaII/SiRFmarco DMA support"
|
|
depends on ARCH_SIRF
|
|
select DMA_ENGINE
|
|
help
|
|
Enable support for the CSR SiRFprimaII DMA engine.
|
|
|
|
config STE_DMA40
|
|
bool "ST-Ericsson DMA40 support"
|
|
depends on ARCH_U8500
|
|
select DMA_ENGINE
|
|
help
|
|
Support for ST-Ericsson DMA40 controller
|
|
|
|
config ST_FDMA
|
|
tristate "ST FDMA dmaengine support"
|
|
depends on ARCH_STI
|
|
depends on REMOTEPROC
|
|
select ST_SLIM_REMOTEPROC
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Enable support for ST FDMA controller.
|
|
It supports 16 independent DMA channels, accepts up to 32 DMA requests
|
|
|
|
Say Y here if you have such a chipset.
|
|
If unsure, say N.
|
|
|
|
config STM32_DMA
|
|
bool "STMicroelectronics STM32 DMA support"
|
|
depends on ARCH_STM32 || COMPILE_TEST
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Enable support for the on-chip DMA controller on STMicroelectronics
|
|
STM32 MCUs.
|
|
If you have a board based on such a MCU and wish to use DMA say Y
|
|
here.
|
|
|
|
config STM32_DMAMUX
|
|
bool "STMicroelectronics STM32 dma multiplexer support"
|
|
depends on STM32_DMA || COMPILE_TEST
|
|
help
|
|
Enable support for the on-chip DMA multiplexer on STMicroelectronics
|
|
STM32 MCUs.
|
|
If you have a board based on such a MCU and wish to use DMAMUX say Y
|
|
here.
|
|
|
|
config STM32_MDMA
|
|
bool "STMicroelectronics STM32 master dma support"
|
|
depends on ARCH_STM32 || COMPILE_TEST
|
|
depends on OF
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Enable support for the on-chip MDMA controller on STMicroelectronics
|
|
STM32 platforms.
|
|
If you have a board based on STM32 SoC and wish to use the master DMA
|
|
say Y here.
|
|
|
|
config SPRD_DMA
|
|
tristate "Spreadtrum DMA support"
|
|
depends on ARCH_SPRD || COMPILE_TEST
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Enable support for the on-chip DMA controller on Spreadtrum platform.
|
|
|
|
config S3C24XX_DMAC
|
|
bool "Samsung S3C24XX DMA support"
|
|
depends on ARCH_S3C24XX || COMPILE_TEST
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Support for the Samsung S3C24XX DMA controller driver. The
|
|
DMA controller is having multiple DMA channels which can be
|
|
configured for different peripherals like audio, UART, SPI.
|
|
The DMA controller can transfer data from memory to peripheral,
|
|
periphal to memory, periphal to periphal and memory to memory.
|
|
|
|
config TXX9_DMAC
|
|
tristate "Toshiba TXx9 SoC DMA support"
|
|
depends on MACH_TX49XX || MACH_TX39XX
|
|
select DMA_ENGINE
|
|
help
|
|
Support the TXx9 SoC internal DMA controller. This can be
|
|
integrated in chips such as the Toshiba TX4927/38/39.
|
|
|
|
config TEGRA20_APB_DMA
|
|
bool "NVIDIA Tegra20 APB DMA support"
|
|
depends on ARCH_TEGRA
|
|
select DMA_ENGINE
|
|
help
|
|
Support for the NVIDIA Tegra20 APB DMA controller driver. The
|
|
DMA controller is having multiple DMA channel which can be
|
|
configured for different peripherals like audio, UART, SPI,
|
|
I2C etc which is in APB bus.
|
|
This DMA controller transfers data from memory to peripheral fifo
|
|
or vice versa. It does not support memory to memory data transfer.
|
|
|
|
config TEGRA210_ADMA
|
|
tristate "NVIDIA Tegra210 ADMA support"
|
|
depends on (ARCH_TEGRA_210_SOC || COMPILE_TEST)
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Support for the NVIDIA Tegra210 ADMA controller driver. The
|
|
DMA controller has multiple DMA channels and is used to service
|
|
various audio clients in the Tegra210 audio processing engine
|
|
(APE). This DMA controller transfers data from memory to
|
|
peripheral and vice versa. It does not support memory to
|
|
memory data transfer.
|
|
|
|
config TIMB_DMA
|
|
tristate "Timberdale FPGA DMA support"
|
|
depends on MFD_TIMBERDALE || COMPILE_TEST
|
|
select DMA_ENGINE
|
|
help
|
|
Enable support for the Timberdale FPGA DMA engine.
|
|
|
|
config UNIPHIER_MDMAC
|
|
tristate "UniPhier MIO DMAC"
|
|
depends on ARCH_UNIPHIER || COMPILE_TEST
|
|
depends on OF
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Enable support for the MIO DMAC (Media I/O DMA controller) on the
|
|
UniPhier platform. This DMA controller is used as the external
|
|
DMA engine of the SD/eMMC controllers of the LD4, Pro4, sLD8 SoCs.
|
|
|
|
config XGENE_DMA
|
|
tristate "APM X-Gene DMA support"
|
|
depends on ARCH_XGENE || COMPILE_TEST
|
|
select DMA_ENGINE
|
|
select DMA_ENGINE_RAID
|
|
select ASYNC_TX_ENABLE_CHANNEL_SWITCH
|
|
help
|
|
Enable support for the APM X-Gene SoC DMA engine.
|
|
|
|
config XILINX_DMA
|
|
tristate "Xilinx AXI DMAS Engine"
|
|
depends on (ARCH_ZYNQ || MICROBLAZE || ARM64)
|
|
select DMA_ENGINE
|
|
help
|
|
Enable support for Xilinx AXI VDMA Soft IP.
|
|
|
|
AXI VDMA engine provides high-bandwidth direct memory access
|
|
between memory and AXI4-Stream video type target
|
|
peripherals including peripherals which support AXI4-
|
|
Stream Video Protocol. It has two stream interfaces/
|
|
channels, Memory Mapped to Stream (MM2S) and Stream to
|
|
Memory Mapped (S2MM) for the data transfers.
|
|
AXI CDMA engine provides high-bandwidth direct memory access
|
|
between a memory-mapped source address and a memory-mapped
|
|
destination address.
|
|
AXI DMA engine provides high-bandwidth one dimensional direct
|
|
memory access between memory and AXI4-Stream target peripherals.
|
|
|
|
config XILINX_ZYNQMP_DMA
|
|
tristate "Xilinx ZynqMP DMA Engine"
|
|
depends on (ARCH_ZYNQ || MICROBLAZE || ARM64)
|
|
select DMA_ENGINE
|
|
help
|
|
Enable support for Xilinx ZynqMP DMA controller.
|
|
|
|
config ZX_DMA
|
|
tristate "ZTE ZX DMA support"
|
|
depends on ARCH_ZX || COMPILE_TEST
|
|
select DMA_ENGINE
|
|
select DMA_VIRTUAL_CHANNELS
|
|
help
|
|
Support the DMA engine for ZTE ZX family platform devices.
|
|
|
|
|
|
# driver files
|
|
source "drivers/dma/bestcomm/Kconfig"
|
|
|
|
source "drivers/dma/mediatek/Kconfig"
|
|
|
|
source "drivers/dma/qcom/Kconfig"
|
|
|
|
source "drivers/dma/dw/Kconfig"
|
|
|
|
source "drivers/dma/dw-edma/Kconfig"
|
|
|
|
source "drivers/dma/hsu/Kconfig"
|
|
|
|
source "drivers/dma/sh/Kconfig"
|
|
|
|
source "drivers/dma/ti/Kconfig"
|
|
|
|
source "drivers/dma/fsl-dpaa2-qdma/Kconfig"
|
|
|
|
# clients
|
|
comment "DMA Clients"
|
|
depends on DMA_ENGINE
|
|
|
|
config ASYNC_TX_DMA
|
|
bool "Async_tx: Offload support for the async_tx api"
|
|
depends on DMA_ENGINE
|
|
help
|
|
This allows the async_tx api to take advantage of offload engines for
|
|
memcpy, memset, xor, and raid6 p+q operations. If your platform has
|
|
a dma engine that can perform raid operations and you have enabled
|
|
MD_RAID456 say Y.
|
|
|
|
If unsure, say N.
|
|
|
|
config DMATEST
|
|
tristate "DMA Test client"
|
|
depends on DMA_ENGINE
|
|
select DMA_ENGINE_RAID
|
|
help
|
|
Simple DMA test client. Say N unless you're debugging a
|
|
DMA Device driver.
|
|
|
|
config DMA_ENGINE_RAID
|
|
bool
|
|
|
|
endif
|