linux-stable/drivers/usb/early/xhci-dbc.h
Lu Baolu 44efd1f1b1 USB: early: Use new USB product ID and strings for DbC device
commit c67678ec78 upstream.

The DbC register set defines an interface for system software
to specify the vendor id and product id for the debug device.
These two values will be presented by the debug device in its
device descriptor idVendor and idProduct fields.

The current used product ID is a place holder. We now have a
valid one. The description strings are changed accordingly.

This patch should be back-ported to kernels as old as v4.12,
that contain the commit aeb9dd1de9 ("usb/early: Add driver
for xhci debug capability").

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21 09:49:21 +01:00

211 lines
4.8 KiB
C

/*
* xhci-dbc.h - xHCI debug capability early driver
*
* Copyright (C) 2016 Intel Corporation
*
* Author: Lu Baolu <baolu.lu@linux.intel.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __LINUX_XHCI_DBC_H
#define __LINUX_XHCI_DBC_H
#include <linux/types.h>
#include <linux/usb/ch9.h>
/*
* xHCI Debug Capability Register interfaces:
*/
struct xdbc_regs {
__le32 capability;
__le32 doorbell;
__le32 ersts; /* Event Ring Segment Table Size*/
__le32 __reserved_0; /* 0c~0f reserved bits */
__le64 erstba; /* Event Ring Segment Table Base Address */
__le64 erdp; /* Event Ring Dequeue Pointer */
__le32 control;
__le32 status;
__le32 portsc; /* Port status and control */
__le32 __reserved_1; /* 2b~28 reserved bits */
__le64 dccp; /* Debug Capability Context Pointer */
__le32 devinfo1; /* Device Descriptor Info Register 1 */
__le32 devinfo2; /* Device Descriptor Info Register 2 */
};
#define DEBUG_MAX_BURST(p) (((p) >> 16) & 0xff)
#define CTRL_DBC_RUN BIT(0)
#define CTRL_PORT_ENABLE BIT(1)
#define CTRL_HALT_OUT_TR BIT(2)
#define CTRL_HALT_IN_TR BIT(3)
#define CTRL_DBC_RUN_CHANGE BIT(4)
#define CTRL_DBC_ENABLE BIT(31)
#define DCST_DEBUG_PORT(p) (((p) >> 24) & 0xff)
#define PORTSC_CONN_STATUS BIT(0)
#define PORTSC_CONN_CHANGE BIT(17)
#define PORTSC_RESET_CHANGE BIT(21)
#define PORTSC_LINK_CHANGE BIT(22)
#define PORTSC_CONFIG_CHANGE BIT(23)
/*
* xHCI Debug Capability data structures:
*/
struct xdbc_trb {
__le32 field[4];
};
struct xdbc_erst_entry {
__le64 seg_addr;
__le32 seg_size;
__le32 __reserved_0;
};
struct xdbc_info_context {
__le64 string0;
__le64 manufacturer;
__le64 product;
__le64 serial;
__le32 length;
__le32 __reserved_0[7];
};
struct xdbc_ep_context {
__le32 ep_info1;
__le32 ep_info2;
__le64 deq;
__le32 tx_info;
__le32 __reserved_0[11];
};
struct xdbc_context {
struct xdbc_info_context info;
struct xdbc_ep_context out;
struct xdbc_ep_context in;
};
#define XDBC_INFO_CONTEXT_SIZE 48
#define XDBC_MAX_STRING_LENGTH 64
#define XDBC_STRING_MANUFACTURER "Linux Foundation"
#define XDBC_STRING_PRODUCT "Linux USB GDB Target"
#define XDBC_STRING_SERIAL "0001"
struct xdbc_strings {
char string0[XDBC_MAX_STRING_LENGTH];
char manufacturer[XDBC_MAX_STRING_LENGTH];
char product[XDBC_MAX_STRING_LENGTH];
char serial[XDBC_MAX_STRING_LENGTH];
};
#define XDBC_PROTOCOL 1 /* GNU Remote Debug Command Set */
#define XDBC_VENDOR_ID 0x1d6b /* Linux Foundation 0x1d6b */
#define XDBC_PRODUCT_ID 0x0011 /* __le16 idProduct; device 0011 */
#define XDBC_DEVICE_REV 0x0010 /* 0.10 */
/*
* xHCI Debug Capability software state structures:
*/
struct xdbc_segment {
struct xdbc_trb *trbs;
dma_addr_t dma;
};
#define XDBC_TRBS_PER_SEGMENT 256
struct xdbc_ring {
struct xdbc_segment *segment;
struct xdbc_trb *enqueue;
struct xdbc_trb *dequeue;
u32 cycle_state;
};
#define XDBC_EPID_OUT 2
#define XDBC_EPID_IN 3
struct xdbc_state {
u16 vendor;
u16 device;
u32 bus;
u32 dev;
u32 func;
void __iomem *xhci_base;
u64 xhci_start;
size_t xhci_length;
int port_number;
/* DbC register base */
struct xdbc_regs __iomem *xdbc_reg;
/* DbC table page */
dma_addr_t table_dma;
void *table_base;
/* event ring segment table */
dma_addr_t erst_dma;
size_t erst_size;
void *erst_base;
/* event ring segments */
struct xdbc_ring evt_ring;
struct xdbc_segment evt_seg;
/* debug capability contexts */
dma_addr_t dbcc_dma;
size_t dbcc_size;
void *dbcc_base;
/* descriptor strings */
dma_addr_t string_dma;
size_t string_size;
void *string_base;
/* bulk OUT endpoint */
struct xdbc_ring out_ring;
struct xdbc_segment out_seg;
void *out_buf;
dma_addr_t out_dma;
/* bulk IN endpoint */
struct xdbc_ring in_ring;
struct xdbc_segment in_seg;
void *in_buf;
dma_addr_t in_dma;
u32 flags;
/* spinlock for early_xdbc_write() reentrancy */
raw_spinlock_t lock;
};
#define XDBC_PCI_MAX_BUSES 256
#define XDBC_PCI_MAX_DEVICES 32
#define XDBC_PCI_MAX_FUNCTION 8
#define XDBC_TABLE_ENTRY_SIZE 64
#define XDBC_ERST_ENTRY_NUM 1
#define XDBC_DBCC_ENTRY_NUM 3
#define XDBC_STRING_ENTRY_NUM 4
/* Bits definitions for xdbc_state.flags: */
#define XDBC_FLAGS_INITIALIZED BIT(0)
#define XDBC_FLAGS_IN_STALL BIT(1)
#define XDBC_FLAGS_OUT_STALL BIT(2)
#define XDBC_FLAGS_IN_PROCESS BIT(3)
#define XDBC_FLAGS_OUT_PROCESS BIT(4)
#define XDBC_FLAGS_CONFIGURED BIT(5)
#define XDBC_MAX_PACKET 1024
/* Door bell target: */
#define OUT_EP_DOORBELL 0
#define IN_EP_DOORBELL 1
#define DOOR_BELL_TARGET(p) (((p) & 0xff) << 8)
#define xdbc_read64(regs) xhci_read_64(NULL, (regs))
#define xdbc_write64(val, regs) xhci_write_64(NULL, (val), (regs))
#endif /* __LINUX_XHCI_DBC_H */