linux-stable/drivers/gpu/drm/radeon/radeon_dp_auxch.c
Arindam Nath 1a738347df drm/radeon: fix DP link training issue with second 4K monitor
There is an issue observed when we hotplug a second DP
4K monitor to the system. Sometimes, the link training
fails for the second monitor after HPD interrupt
generation.

The issue happens when some queued or deferred transactions
are already present on the AUX channel when we initiate
a new transcation to (say) get DPCD or during link training.

We set AUX_IGNORE_HPD_DISCON bit in the AUX_CONTROL
register so that we can ignore any such deferred
transactions when a new AUX transaction is initiated.

Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2016-05-05 11:14:18 -04:00

204 lines
5.4 KiB
C

/*
* Copyright 2015 Red Hat Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
* Authors: Dave Airlie
*/
#include <drm/drmP.h>
#include <drm/radeon_drm.h>
#include "radeon.h"
#include "nid.h"
#define AUX_RX_ERROR_FLAGS (AUX_SW_RX_OVERFLOW | \
AUX_SW_RX_HPD_DISCON | \
AUX_SW_RX_PARTIAL_BYTE | \
AUX_SW_NON_AUX_MODE | \
AUX_SW_RX_SYNC_INVALID_L | \
AUX_SW_RX_SYNC_INVALID_H | \
AUX_SW_RX_INVALID_START | \
AUX_SW_RX_RECV_NO_DET | \
AUX_SW_RX_RECV_INVALID_H | \
AUX_SW_RX_RECV_INVALID_V)
#define AUX_SW_REPLY_GET_BYTE_COUNT(x) (((x) >> 24) & 0x1f)
#define BARE_ADDRESS_SIZE 3
static const u32 aux_offset[] =
{
0x6200 - 0x6200,
0x6250 - 0x6200,
0x62a0 - 0x6200,
0x6300 - 0x6200,
0x6350 - 0x6200,
0x63a0 - 0x6200,
};
ssize_t
radeon_dp_aux_transfer_native(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
{
struct radeon_i2c_chan *chan =
container_of(aux, struct radeon_i2c_chan, aux);
struct drm_device *dev = chan->dev;
struct radeon_device *rdev = dev->dev_private;
int ret = 0, i;
uint32_t tmp, ack = 0;
int instance = chan->rec.i2c_id & 0xf;
u8 byte;
u8 *buf = msg->buffer;
int retry_count = 0;
int bytes;
int msize;
bool is_write = false;
if (WARN_ON(msg->size > 16))
return -E2BIG;
switch (msg->request & ~DP_AUX_I2C_MOT) {
case DP_AUX_NATIVE_WRITE:
case DP_AUX_I2C_WRITE:
is_write = true;
break;
case DP_AUX_NATIVE_READ:
case DP_AUX_I2C_READ:
break;
default:
return -EINVAL;
}
/* work out two sizes required */
msize = 0;
bytes = BARE_ADDRESS_SIZE;
if (msg->size) {
msize = msg->size - 1;
bytes++;
if (is_write)
bytes += msg->size;
}
mutex_lock(&chan->mutex);
/* switch the pad to aux mode */
tmp = RREG32(chan->rec.mask_clk_reg);
tmp |= (1 << 16);
WREG32(chan->rec.mask_clk_reg, tmp);
/* setup AUX control register with correct HPD pin */
tmp = RREG32(AUX_CONTROL + aux_offset[instance]);
tmp &= AUX_HPD_SEL(0x7);
tmp |= AUX_HPD_SEL(chan->rec.hpd);
tmp |= AUX_EN | AUX_LS_READ_EN | AUX_HPD_DISCON(0x1);
WREG32(AUX_CONTROL + aux_offset[instance], tmp);
/* atombios appears to write this twice lets copy it */
WREG32(AUX_SW_CONTROL + aux_offset[instance],
AUX_SW_WR_BYTES(bytes));
WREG32(AUX_SW_CONTROL + aux_offset[instance],
AUX_SW_WR_BYTES(bytes));
/* write the data header into the registers */
/* request, address, msg size */
byte = (msg->request << 4) | ((msg->address >> 16) & 0xf);
WREG32(AUX_SW_DATA + aux_offset[instance],
AUX_SW_DATA_MASK(byte) | AUX_SW_AUTOINCREMENT_DISABLE);
byte = (msg->address >> 8) & 0xff;
WREG32(AUX_SW_DATA + aux_offset[instance],
AUX_SW_DATA_MASK(byte));
byte = msg->address & 0xff;
WREG32(AUX_SW_DATA + aux_offset[instance],
AUX_SW_DATA_MASK(byte));
byte = msize;
WREG32(AUX_SW_DATA + aux_offset[instance],
AUX_SW_DATA_MASK(byte));
/* if we are writing - write the msg buffer */
if (is_write) {
for (i = 0; i < msg->size; i++) {
WREG32(AUX_SW_DATA + aux_offset[instance],
AUX_SW_DATA_MASK(buf[i]));
}
}
/* clear the ACK */
WREG32(AUX_SW_INTERRUPT_CONTROL + aux_offset[instance], AUX_SW_DONE_ACK);
/* write the size and GO bits */
WREG32(AUX_SW_CONTROL + aux_offset[instance],
AUX_SW_WR_BYTES(bytes) | AUX_SW_GO);
/* poll the status registers - TODO irq support */
do {
tmp = RREG32(AUX_SW_STATUS + aux_offset[instance]);
if (tmp & AUX_SW_DONE) {
break;
}
usleep_range(100, 200);
} while (retry_count++ < 1000);
if (retry_count >= 1000) {
DRM_ERROR("auxch hw never signalled completion, error %08x\n", tmp);
ret = -EIO;
goto done;
}
if (tmp & AUX_SW_RX_TIMEOUT) {
DRM_DEBUG_KMS("dp_aux_ch timed out\n");
ret = -ETIMEDOUT;
goto done;
}
if (tmp & AUX_RX_ERROR_FLAGS) {
DRM_DEBUG_KMS("dp_aux_ch flags not zero: %08x\n", tmp);
ret = -EIO;
goto done;
}
bytes = AUX_SW_REPLY_GET_BYTE_COUNT(tmp);
if (bytes) {
WREG32(AUX_SW_DATA + aux_offset[instance],
AUX_SW_DATA_RW | AUX_SW_AUTOINCREMENT_DISABLE);
tmp = RREG32(AUX_SW_DATA + aux_offset[instance]);
ack = (tmp >> 8) & 0xff;
for (i = 0; i < bytes - 1; i++) {
tmp = RREG32(AUX_SW_DATA + aux_offset[instance]);
if (buf)
buf[i] = (tmp >> 8) & 0xff;
}
if (buf)
ret = bytes - 1;
}
WREG32(AUX_SW_INTERRUPT_CONTROL + aux_offset[instance], AUX_SW_DONE_ACK);
if (is_write)
ret = msg->size;
done:
mutex_unlock(&chan->mutex);
if (ret >= 0)
msg->reply = ack >> 4;
return ret;
}