mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-13 14:14:37 +00:00
827df0571f
Until now the "channel" number is identical to how the channel is identified inside the (FIFO) registers. In our case we have eight channels and the hardware also has eight inputs. However, there are two special inputs: - channel 6 can select between the SAR_ADC_CH6 pad and the chip's internal temperature sensor - channel 7 can select between SAR_ADC_CH7 and VSS, VDD / 4, VDD / 2, VDD * 3 / 4 and VDD. When programming the registers to read for example the temperature sensor we have to select FIFO channel 6, set the correct bit which muxes channel 6 to the temperature sensor and then start the ADC measurement for channel 6 as usual. When we add support for the temperature sensor the driver has to know about that it has to use FIFO channel 6 to measure using the chip's internal temperature sensor. However, in that case the iio_chan_spec channel will not be 6 because this is already used for the SAR_ADC_CH6 pad input. Thus we use iio_chan_spec's address field to store the FIFO channel number for each channel. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|---|---|---|
| .. | ||
| accel | ||
| adc | ||
| afe | ||
| amplifiers | ||
| buffer | ||
| chemical | ||
| common | ||
| counter | ||
| dac | ||
| dummy | ||
| frequency | ||
| gyro | ||
| health | ||
| humidity | ||
| imu | ||
| light | ||
| magnetometer | ||
| multiplexer | ||
| orientation | ||
| potentiometer | ||
| potentiostat | ||
| pressure | ||
| proximity | ||
| resolver | ||
| temperature | ||
| trigger | ||
| iio_core.h | ||
| iio_core_trigger.h | ||
| industrialio-buffer.c | ||
| industrialio-configfs.c | ||
| industrialio-core.c | ||
| industrialio-event.c | ||
| industrialio-sw-device.c | ||
| industrialio-sw-trigger.c | ||
| industrialio-trigger.c | ||
| industrialio-triggered-event.c | ||
| inkern.c | ||
| Kconfig | ||
| Makefile | ||