linux-stable/drivers/dma-buf
Daniel Vetter 8284bae723 drm-misc-next for v6.1:
UAPI Changes:
 
 Cross-subsystem Changes:
 - DMA-buf: documentation updates.
 - Assorted small fixes to vga16fb
 - Fix fbdev drivers to use the aperture helpers.
 - Make removal of conflicting drivers work correctly without fbdev enabled.
 
 Core Changes:
 - bridge, scheduler, dp-mst: Assorted small fixes.
 - Add more format helpers to fourcc, and use it to replace the cpp usage.
 - Add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx (single channel), and DRM_FORMAT_Dxx
   ("darkness", inverted single channel)
 - Add packed AYUV8888 and XYUV8888 formats.
 - Assorted documentation updates.
 - Rename ttm_bo_init to ttm_bo_init_validate.
 - Allow TTM bo's to exist without backing store.
 - Convert drm selftests to kunit.
 - Add managed init functions for (panel) bridge, crtc, encoder and connector.
 - Fix endianness handling in various format conversion helpers.
 - Make tests pass on big-endian platforms, and add test for rgb888 -> rgb565
 - Move DRM_PLANE_HELPER_NO_SCALING to atomic helpers and rename, so
   drm_plane_helper is no longer needed in most drivers.
 - Use idr_init_base instead of idr_init.
 - Rename FB and GEM CMA helpers to DMA helpers.
 - Rework XRGB8888 related conversion helpers, and add drm_fb_blit() that
   takes a iosys_map. Make drm_fb_memcpy take an iosys_map too.
 - Move edid luminance calculation to core, and use it in i915.
 
 Driver Changes:
 - bridge/{adv7511,ti-sn65dsi86,parade-ps8640}, panel/{simple,nt35510,tc358767},
   nouveau, sun4i, mipi-dsi, mgag200, bochs, arm, komeda, vmwgfx, pl111:
   Assorted small fixes and doc updates.
 - vc4: Rework hdmi power up, and depend on PM.
 - panel/simple: Add Samsung LTL101AL01.
 - ingenic: Add JZ4760(B) support, avoid a modeset when sharpness property
   is unchanged, and use the new PM ops.
 - Revert some amdgpu commits that cause garbaged graphics when starting
   X, and reapply them with the real problem fixed.
 - Completely rework vc4 init to use managed helpers.
 - Rename via_drv to via_dri1, and move all stuff there only used by the
   dri1 implementation in preperation for atomic modeset.
 - Use regmap bulk write in ssd130x.
 - Power sequence and clock updates to it6505.
 - Split panel-sitrox-st7701  init sequence and rework mode programming code.
 - virtio: Improve error and edge conditions handling, and convert to use managed
   helpers.
 - Add Samsung LTL101AL01, B120XAN01.0, R140NWF5 RH, DMT028VGHMCMI-1A T, panels.
 - Add generic fbdev support to komeda.
 - Split mgag200 modeset handling to make it more model-specific.
 - Convert simpledrm to use atomic helpers.
 - Improve udl suspend/disconnect handling.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAmMA59MACgkQ/lWMcqZw
 E8MBihAAtttSIF8fvRIgnoFeswteB5HlXtrSOVRns+0h7mNzcmUL3yp/jV9betND
 NEfBCERRIRk5vqkzm2o9P/rTG+KMYCyyCNdcvvh+rVn+HU2V9MwtJdowZqLu7Rxi
 Qn59SaL6fMQanJwF8yHcii1ikqelU8TfsMXcFXt2d/yjn5D/h80tNOULEB74zIDH
 Vey/xTawcqEz3Qbj2mL4VihEnzU1cziGTpZvAWU2GTdWLxxN88uA4RD2JDyvGaXG
 oO6oilYT9TW+2C+0jfMUysu7RcNYuo4KD8dSVLvec+UKDKdO1pSqn40vgTZp0MBw
 V0VGg/Lqg6+u33UQkxeRpdzTboD4cMjoeP0/IJdHQVMYYH449tXDgZEjXqVHdz2c
 Ea8JIm36CHjqA0Ua3DT8y1qRtdrjuATJauoB6MXW8RpguqMzVuI4e9Dio77WRNYe
 Lg/V5AlQEKcwxeqe6v+8K7aB4lvHZ9g0WSMFHoxYz28d2cFWDVeKgK/GCW3WWMKo
 AQigRS84z3QBqK+IeTjbfZREoRFtx7NzQpzU9jQdL06XGWExhGOs8yU2OCoDNN8+
 iFMBStEPHLPg27HrLV5JYeMRUBPJMnwQhAEnrSv9KqIfPD3/g2jonoGm3J57p+OI
 Ag7pwg88spzP1DC7M6+UvzUnH76Dhf4hdnfQjz10c6BfS1ODPbA=
 =kU/l
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-next-2022-08-20-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v6.1:

UAPI Changes:

Cross-subsystem Changes:
- DMA-buf: documentation updates.
- Assorted small fixes to vga16fb
- Fix fbdev drivers to use the aperture helpers.
- Make removal of conflicting drivers work correctly without fbdev enabled.

Core Changes:
- bridge, scheduler, dp-mst: Assorted small fixes.
- Add more format helpers to fourcc, and use it to replace the cpp usage.
- Add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx (single channel), and DRM_FORMAT_Dxx
  ("darkness", inverted single channel)
- Add packed AYUV8888 and XYUV8888 formats.
- Assorted documentation updates.
- Rename ttm_bo_init to ttm_bo_init_validate.
- Allow TTM bo's to exist without backing store.
- Convert drm selftests to kunit.
- Add managed init functions for (panel) bridge, crtc, encoder and connector.
- Fix endianness handling in various format conversion helpers.
- Make tests pass on big-endian platforms, and add test for rgb888 -> rgb565
- Move DRM_PLANE_HELPER_NO_SCALING to atomic helpers and rename, so
  drm_plane_helper is no longer needed in most drivers.
- Use idr_init_base instead of idr_init.
- Rename FB and GEM CMA helpers to DMA helpers.
- Rework XRGB8888 related conversion helpers, and add drm_fb_blit() that
  takes a iosys_map. Make drm_fb_memcpy take an iosys_map too.
- Move edid luminance calculation to core, and use it in i915.

Driver Changes:
- bridge/{adv7511,ti-sn65dsi86,parade-ps8640}, panel/{simple,nt35510,tc358767},
  nouveau, sun4i, mipi-dsi, mgag200, bochs, arm, komeda, vmwgfx, pl111:
  Assorted small fixes and doc updates.
- vc4: Rework hdmi power up, and depend on PM.
- panel/simple: Add Samsung LTL101AL01.
- ingenic: Add JZ4760(B) support, avoid a modeset when sharpness property
  is unchanged, and use the new PM ops.
- Revert some amdgpu commits that cause garbaged graphics when starting
  X, and reapply them with the real problem fixed.
- Completely rework vc4 init to use managed helpers.
- Rename via_drv to via_dri1, and move all stuff there only used by the
  dri1 implementation in preperation for atomic modeset.
- Use regmap bulk write in ssd130x.
- Power sequence and clock updates to it6505.
- Split panel-sitrox-st7701  init sequence and rework mode programming code.
- virtio: Improve error and edge conditions handling, and convert to use managed
  helpers.
- Add Samsung LTL101AL01, B120XAN01.0, R140NWF5 RH, DMT028VGHMCMI-1A T, panels.
- Add generic fbdev support to komeda.
- Split mgag200 modeset handling to make it more model-specific.
- Convert simpledrm to use atomic helpers.
- Improve udl suspend/disconnect handling.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f0c71766-61e8-19b7-763a-5fbcdefc633d@linux.intel.com
2022-09-06 10:56:04 +02:00
..
heaps dma-buf-map: Rename to iosys-map 2022-02-07 16:35:35 -08:00
dma-buf-sysfs-stats.c kobject: remove kset from struct kset_uevent_ops callbacks 2021-12-28 11:26:18 +01:00
dma-buf-sysfs-stats.h dma-buf: Delete the DMA-BUF attachment sysfs statistics 2021-07-20 11:06:59 +02:00
dma-buf.c drm for 5.20/6.0 2022-08-03 19:52:08 -07:00
dma-fence-array.c dma-buf: handle empty dma_fence_arrays gracefully 2022-03-29 09:14:30 +02:00
dma-fence-chain.c dma-buf: cleanup dma_fence_chain_walk 2022-05-30 11:24:50 +02:00
dma-fence-unwrap.c dma-buf: revert "return only unsignaled fences in dma_fence_unwrap_for_each v3" 2022-07-14 14:41:30 +02:00
dma-fence.c dma-buf: add dma_fence_describe and dma_resv_describe v2 2021-11-11 09:35:13 +01:00
dma-heap.c dma-buf: heaps: Fix potential spectre v1 gadget 2022-02-01 13:18:09 +05:30
dma-resv.c dma-buf: Fix one use-after-free of fence 2022-07-07 10:24:59 +02:00
Kconfig dma-buf: deprecate DMABUF_SYSFS_STATS 2022-06-23 10:51:43 +02:00
Makefile dma-buf: cleanup dma_fence_unwrap implementation 2022-05-30 14:16:32 +02:00
selftest.c dma-buf: Introduce selftesting framework 2019-08-19 18:01:34 +01:00
selftest.h dma-buf: Introduce selftesting framework 2019-08-19 18:01:34 +01:00
selftests.h dma-buf: add dma_fence_unwrap v2 2022-03-25 14:18:28 +01:00
st-dma-fence-chain.c dma-buf: add dma_fence_chain_alloc/free v3 2021-06-14 19:38:34 +02:00
st-dma-fence-unwrap.c dma-buf: generalize dma_fence unwrap & merging v3 2022-05-30 14:24:04 +02:00
st-dma-fence.c dma-buf: Avoid comma separated statements 2021-02-09 17:14:11 +01:00
st-dma-resv.c dma-buf: drop seq count based update 2022-04-07 12:53:54 +02:00
sw_sync.c compat_ioctl: move more drivers to compat_ptr_ioctl 2019-10-23 17:23:44 +02:00
sync_debug.c
sync_debug.h
sync_file.c dma-buf/sync_file: use strscpy to replace strlcpy 2022-08-10 13:50:49 +02:00
sync_trace.h
udmabuf.c Linux 5.19-rc6 2022-07-13 10:54:56 +10:00