mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-10-27 22:51:31 +00:00
4f1cd91497
Pull second set of media updates from Mauro Carvalho Chehab:
"Despite its size, most of the stuff here is trivial. This series
contains:
- s5p-mfc: additions at the driver and at the core to support H.264
hardware codec;
- Some improvements at s5p and davinci embedded drivers;
- Some V4L2 compliance fixes applied on a few drivers;
- Several random trivial patches, including several fixes and a few
new board support additions;
Notes:
1) Some Exynos media patches were dependent on some -arm fixes that
got merged on changeset 782cd9e. That's why this pull request is
based that changeset.
2) As promised, I reviewed the pending VB2 DMABUF series.
While setting a test environment, it was noticed that the upstream
support for Samsung Exynos 4 boards (smdk310 and Origen) are
broken upstream, likely due to regressions: both defconfigs are
wrong and regulator settings for both boards are broken. That,
allied with some bug at the dummy regulator driver, causes OOPSes
during boot time.
Long story short: even fixing the above, the proposed patches
OOPSed when running the DMABUF test. Not sure yet if the OOPSes
are due to some other undetected regressions, or due to some bug
on the patches.
Due to the above, DMABUF patches for vb2 got NACKed for 3.7."
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (109 commits)
[media] m5mols: Add missing #include <linux/sizes.h>
[media] stk1160: Add support for S-Video input
Revert "[media] omap3isp: Replace cpu_is_omap3630() with ISP revision check"
[media] dvb: LNA implementation changes
[media] v4l2-ioctl: fix W=1 warnings
[media] v4l2-ioctl: add blocks check for VIDIOC_SUBDEV_G/S_EDID
[media] omap3isp: Fix compilation error in ispreg.h
[media] rc-msi-digivox-ii: Add full scan keycodes
[media] cx25821: testing the wrong variable
[media] tda18271-common: hold the I2C adapter during write transfers
[media] ds3000: add module parameter to force firmware upload
[media] drivers/media: Remove unnecessary semicolon
[media] winbond: remove space from driver name
[media] iguanair: cannot send data from the stack
[media] omap3isp: Replace cpu_is_omap3630() with ISP revision check
[media] dvb-usb: print small buffers via %*ph
[media] uvc: Add return code check at vb2_queue_init()
[media] em28xx: Replace memcpy with struct assignment
[media] bt8xx: Add video4linux control V4L2_CID_COLOR_KILLER
[media] mem2mem_testdev: Use devm_kzalloc() in probe
...
Conflicts:
arch/arm/mach-davinci/include/mach/da8xx.h
1164 lines
29 KiB
C
1164 lines
29 KiB
C
/* linux/arch/arm/mach-exynos4/mach-universal_c210.c
|
|
*
|
|
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/platform_device.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/input.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/gpio_keys.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/mfd/max8998.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/regulator/fixed.h>
|
|
#include <linux/regulator/max8952.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/i2c-gpio.h>
|
|
#include <linux/i2c/mcs.h>
|
|
#include <linux/i2c/atmel_mxt_ts.h>
|
|
#include <linux/platform_data/s3c-hsotg.h>
|
|
#include <drm/exynos_drm.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/hardware/gic.h>
|
|
#include <asm/mach-types.h>
|
|
|
|
#include <video/samsung_fimd.h>
|
|
#include <plat/regs-serial.h>
|
|
#include <plat/clock.h>
|
|
#include <plat/cpu.h>
|
|
#include <plat/devs.h>
|
|
#include <linux/platform_data/i2c-s3c2410.h>
|
|
#include <plat/gpio-cfg.h>
|
|
#include <plat/fb.h>
|
|
#include <plat/mfc.h>
|
|
#include <plat/sdhci.h>
|
|
#include <plat/fimc-core.h>
|
|
#include <plat/s5p-time.h>
|
|
#include <plat/camport.h>
|
|
#include <linux/platform_data/mipi-csis.h>
|
|
|
|
#include <mach/map.h>
|
|
|
|
#include <media/v4l2-mediabus.h>
|
|
#include <media/s5p_fimc.h>
|
|
#include <media/m5mols.h>
|
|
#include <media/s5k6aa.h>
|
|
|
|
#include "common.h"
|
|
|
|
/* Following are default values for UCON, ULCON and UFCON UART registers */
|
|
#define UNIVERSAL_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
|
|
S3C2410_UCON_RXILEVEL | \
|
|
S3C2410_UCON_TXIRQMODE | \
|
|
S3C2410_UCON_RXIRQMODE | \
|
|
S3C2410_UCON_RXFIFO_TOI | \
|
|
S3C2443_UCON_RXERR_IRQEN)
|
|
|
|
#define UNIVERSAL_ULCON_DEFAULT S3C2410_LCON_CS8
|
|
|
|
#define UNIVERSAL_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
|
|
S5PV210_UFCON_TXTRIG256 | \
|
|
S5PV210_UFCON_RXTRIG256)
|
|
|
|
static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = {
|
|
[0] = {
|
|
.hwport = 0,
|
|
.ucon = UNIVERSAL_UCON_DEFAULT,
|
|
.ulcon = UNIVERSAL_ULCON_DEFAULT,
|
|
.ufcon = UNIVERSAL_UFCON_DEFAULT,
|
|
},
|
|
[1] = {
|
|
.hwport = 1,
|
|
.ucon = UNIVERSAL_UCON_DEFAULT,
|
|
.ulcon = UNIVERSAL_ULCON_DEFAULT,
|
|
.ufcon = UNIVERSAL_UFCON_DEFAULT,
|
|
},
|
|
[2] = {
|
|
.hwport = 2,
|
|
.ucon = UNIVERSAL_UCON_DEFAULT,
|
|
.ulcon = UNIVERSAL_ULCON_DEFAULT,
|
|
.ufcon = UNIVERSAL_UFCON_DEFAULT,
|
|
},
|
|
[3] = {
|
|
.hwport = 3,
|
|
.ucon = UNIVERSAL_UCON_DEFAULT,
|
|
.ulcon = UNIVERSAL_ULCON_DEFAULT,
|
|
.ufcon = UNIVERSAL_UFCON_DEFAULT,
|
|
},
|
|
};
|
|
|
|
static struct regulator_consumer_supply max8952_consumer =
|
|
REGULATOR_SUPPLY("vdd_arm", NULL);
|
|
|
|
static struct max8952_platform_data universal_max8952_pdata __initdata = {
|
|
.gpio_vid0 = EXYNOS4_GPX0(3),
|
|
.gpio_vid1 = EXYNOS4_GPX0(4),
|
|
.gpio_en = -1, /* Not controllable, set "Always High" */
|
|
.default_mode = 0, /* vid0 = 0, vid1 = 0 */
|
|
.dvs_mode = { 48, 32, 28, 18 }, /* 1.25, 1.20, 1.05, 0.95V */
|
|
.sync_freq = 0, /* default: fastest */
|
|
.ramp_speed = 0, /* default: fastest */
|
|
|
|
.reg_data = {
|
|
.constraints = {
|
|
.name = "VARM_1.2V",
|
|
.min_uV = 770000,
|
|
.max_uV = 1400000,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
|
|
.always_on = 1,
|
|
.boot_on = 1,
|
|
},
|
|
.num_consumer_supplies = 1,
|
|
.consumer_supplies = &max8952_consumer,
|
|
},
|
|
};
|
|
|
|
static struct regulator_consumer_supply lp3974_buck1_consumer =
|
|
REGULATOR_SUPPLY("vdd_int", NULL);
|
|
|
|
static struct regulator_consumer_supply lp3974_buck2_consumer =
|
|
REGULATOR_SUPPLY("vddg3d", NULL);
|
|
|
|
static struct regulator_consumer_supply lp3974_buck3_consumer[] = {
|
|
REGULATOR_SUPPLY("vdet", "s5p-sdo"),
|
|
REGULATOR_SUPPLY("vdd_reg", "0-003c"),
|
|
};
|
|
|
|
static struct regulator_init_data lp3974_buck1_data = {
|
|
.constraints = {
|
|
.name = "VINT_1.1V",
|
|
.min_uV = 750000,
|
|
.max_uV = 1500000,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
|
|
REGULATOR_CHANGE_STATUS,
|
|
.boot_on = 1,
|
|
.state_mem = {
|
|
.disabled = 1,
|
|
},
|
|
},
|
|
.num_consumer_supplies = 1,
|
|
.consumer_supplies = &lp3974_buck1_consumer,
|
|
};
|
|
|
|
static struct regulator_init_data lp3974_buck2_data = {
|
|
.constraints = {
|
|
.name = "VG3D_1.1V",
|
|
.min_uV = 750000,
|
|
.max_uV = 1500000,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
|
|
REGULATOR_CHANGE_STATUS,
|
|
.boot_on = 1,
|
|
.state_mem = {
|
|
.disabled = 1,
|
|
},
|
|
},
|
|
.num_consumer_supplies = 1,
|
|
.consumer_supplies = &lp3974_buck2_consumer,
|
|
};
|
|
|
|
static struct regulator_init_data lp3974_buck3_data = {
|
|
.constraints = {
|
|
.name = "VCC_1.8V",
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
.apply_uV = 1,
|
|
.always_on = 1,
|
|
.state_mem = {
|
|
.enabled = 1,
|
|
},
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(lp3974_buck3_consumer),
|
|
.consumer_supplies = lp3974_buck3_consumer,
|
|
};
|
|
|
|
static struct regulator_init_data lp3974_buck4_data = {
|
|
.constraints = {
|
|
.name = "VMEM_1.2V",
|
|
.min_uV = 1200000,
|
|
.max_uV = 1200000,
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
.apply_uV = 1,
|
|
.state_mem = {
|
|
.disabled = 1,
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data lp3974_ldo2_data = {
|
|
.constraints = {
|
|
.name = "VALIVE_1.2V",
|
|
.min_uV = 1200000,
|
|
.max_uV = 1200000,
|
|
.apply_uV = 1,
|
|
.always_on = 1,
|
|
.state_mem = {
|
|
.enabled = 1,
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct regulator_consumer_supply lp3974_ldo3_consumer[] = {
|
|
REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"),
|
|
REGULATOR_SUPPLY("vdd", "exynos4-hdmi"),
|
|
REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"),
|
|
REGULATOR_SUPPLY("vddcore", "s5p-mipi-csis.0"),
|
|
};
|
|
|
|
static struct regulator_init_data lp3974_ldo3_data = {
|
|
.constraints = {
|
|
.name = "VUSB+MIPI_1.1V",
|
|
.min_uV = 1100000,
|
|
.max_uV = 1100000,
|
|
.apply_uV = 1,
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
.state_mem = {
|
|
.disabled = 1,
|
|
},
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo3_consumer),
|
|
.consumer_supplies = lp3974_ldo3_consumer,
|
|
};
|
|
|
|
static struct regulator_consumer_supply lp3974_ldo4_consumer[] = {
|
|
REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"),
|
|
};
|
|
|
|
static struct regulator_init_data lp3974_ldo4_data = {
|
|
.constraints = {
|
|
.name = "VADC_3.3V",
|
|
.min_uV = 3300000,
|
|
.max_uV = 3300000,
|
|
.apply_uV = 1,
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
.state_mem = {
|
|
.disabled = 1,
|
|
},
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo4_consumer),
|
|
.consumer_supplies = lp3974_ldo4_consumer,
|
|
};
|
|
|
|
static struct regulator_init_data lp3974_ldo5_data = {
|
|
.constraints = {
|
|
.name = "VTF_2.8V",
|
|
.min_uV = 2800000,
|
|
.max_uV = 2800000,
|
|
.apply_uV = 1,
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
.state_mem = {
|
|
.disabled = 1,
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data lp3974_ldo6_data = {
|
|
.constraints = {
|
|
.name = "LDO6",
|
|
.min_uV = 2000000,
|
|
.max_uV = 2000000,
|
|
.apply_uV = 1,
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
.state_mem = {
|
|
.disabled = 1,
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct regulator_consumer_supply lp3974_ldo7_consumer[] = {
|
|
REGULATOR_SUPPLY("vddio", "s5p-mipi-csis.0"),
|
|
};
|
|
|
|
static struct regulator_init_data lp3974_ldo7_data = {
|
|
.constraints = {
|
|
.name = "VLCD+VMIPI_1.8V",
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
.apply_uV = 1,
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
.state_mem = {
|
|
.disabled = 1,
|
|
},
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo7_consumer),
|
|
.consumer_supplies = lp3974_ldo7_consumer,
|
|
};
|
|
|
|
static struct regulator_consumer_supply lp3974_ldo8_consumer[] = {
|
|
REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"),
|
|
REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"),
|
|
};
|
|
|
|
static struct regulator_init_data lp3974_ldo8_data = {
|
|
.constraints = {
|
|
.name = "VUSB+VDAC_3.3V",
|
|
.min_uV = 3300000,
|
|
.max_uV = 3300000,
|
|
.apply_uV = 1,
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
.state_mem = {
|
|
.disabled = 1,
|
|
},
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo8_consumer),
|
|
.consumer_supplies = lp3974_ldo8_consumer,
|
|
};
|
|
|
|
static struct regulator_consumer_supply lp3974_ldo9_consumer =
|
|
REGULATOR_SUPPLY("vddio", "0-003c");
|
|
|
|
static struct regulator_init_data lp3974_ldo9_data = {
|
|
.constraints = {
|
|
.name = "VCC_2.8V",
|
|
.min_uV = 2800000,
|
|
.max_uV = 2800000,
|
|
.apply_uV = 1,
|
|
.always_on = 1,
|
|
.state_mem = {
|
|
.enabled = 1,
|
|
},
|
|
},
|
|
.num_consumer_supplies = 1,
|
|
.consumer_supplies = &lp3974_ldo9_consumer,
|
|
};
|
|
|
|
static struct regulator_init_data lp3974_ldo10_data = {
|
|
.constraints = {
|
|
.name = "VPLL_1.1V",
|
|
.min_uV = 1100000,
|
|
.max_uV = 1100000,
|
|
.boot_on = 1,
|
|
.apply_uV = 1,
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
.state_mem = {
|
|
.disabled = 1,
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct regulator_consumer_supply lp3974_ldo11_consumer =
|
|
REGULATOR_SUPPLY("dig_28", "0-001f");
|
|
|
|
static struct regulator_init_data lp3974_ldo11_data = {
|
|
.constraints = {
|
|
.name = "CAM_AF_3.3V",
|
|
.min_uV = 3300000,
|
|
.max_uV = 3300000,
|
|
.apply_uV = 1,
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
.state_mem = {
|
|
.disabled = 1,
|
|
},
|
|
},
|
|
.num_consumer_supplies = 1,
|
|
.consumer_supplies = &lp3974_ldo11_consumer,
|
|
};
|
|
|
|
static struct regulator_init_data lp3974_ldo12_data = {
|
|
.constraints = {
|
|
.name = "PS_2.8V",
|
|
.min_uV = 2800000,
|
|
.max_uV = 2800000,
|
|
.apply_uV = 1,
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
.state_mem = {
|
|
.disabled = 1,
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data lp3974_ldo13_data = {
|
|
.constraints = {
|
|
.name = "VHIC_1.2V",
|
|
.min_uV = 1200000,
|
|
.max_uV = 1200000,
|
|
.apply_uV = 1,
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
.state_mem = {
|
|
.disabled = 1,
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct regulator_consumer_supply lp3974_ldo14_consumer =
|
|
REGULATOR_SUPPLY("dig_18", "0-001f");
|
|
|
|
static struct regulator_init_data lp3974_ldo14_data = {
|
|
.constraints = {
|
|
.name = "CAM_I_HOST_1.8V",
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
.apply_uV = 1,
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
.state_mem = {
|
|
.disabled = 1,
|
|
},
|
|
},
|
|
.num_consumer_supplies = 1,
|
|
.consumer_supplies = &lp3974_ldo14_consumer,
|
|
};
|
|
|
|
|
|
static struct regulator_consumer_supply lp3974_ldo15_consumer =
|
|
REGULATOR_SUPPLY("dig_12", "0-001f");
|
|
|
|
static struct regulator_init_data lp3974_ldo15_data = {
|
|
.constraints = {
|
|
.name = "CAM_S_DIG+FM33_CORE_1.2V",
|
|
.min_uV = 1200000,
|
|
.max_uV = 1200000,
|
|
.apply_uV = 1,
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
.state_mem = {
|
|
.disabled = 1,
|
|
},
|
|
},
|
|
.num_consumer_supplies = 1,
|
|
.consumer_supplies = &lp3974_ldo15_consumer,
|
|
};
|
|
|
|
static struct regulator_consumer_supply lp3974_ldo16_consumer[] = {
|
|
REGULATOR_SUPPLY("vdda", "0-003c"),
|
|
REGULATOR_SUPPLY("a_sensor", "0-001f"),
|
|
};
|
|
|
|
static struct regulator_init_data lp3974_ldo16_data = {
|
|
.constraints = {
|
|
.name = "CAM_S_ANA_2.8V",
|
|
.min_uV = 2800000,
|
|
.max_uV = 2800000,
|
|
.apply_uV = 1,
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
.state_mem = {
|
|
.disabled = 1,
|
|
},
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo16_consumer),
|
|
.consumer_supplies = lp3974_ldo16_consumer,
|
|
};
|
|
|
|
static struct regulator_init_data lp3974_ldo17_data = {
|
|
.constraints = {
|
|
.name = "VCC_3.0V_LCD",
|
|
.min_uV = 3000000,
|
|
.max_uV = 3000000,
|
|
.apply_uV = 1,
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
.boot_on = 1,
|
|
.state_mem = {
|
|
.disabled = 1,
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data lp3974_32khz_ap_data = {
|
|
.constraints = {
|
|
.name = "32KHz AP",
|
|
.always_on = 1,
|
|
.state_mem = {
|
|
.enabled = 1,
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data lp3974_32khz_cp_data = {
|
|
.constraints = {
|
|
.name = "32KHz CP",
|
|
.state_mem = {
|
|
.disabled = 1,
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data lp3974_vichg_data = {
|
|
.constraints = {
|
|
.name = "VICHG",
|
|
.state_mem = {
|
|
.disabled = 1,
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data lp3974_esafeout1_data = {
|
|
.constraints = {
|
|
.name = "SAFEOUT1",
|
|
.min_uV = 4800000,
|
|
.max_uV = 4800000,
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
.always_on = 1,
|
|
.state_mem = {
|
|
.enabled = 1,
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data lp3974_esafeout2_data = {
|
|
.constraints = {
|
|
.name = "SAFEOUT2",
|
|
.boot_on = 1,
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
.state_mem = {
|
|
.enabled = 1,
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct max8998_regulator_data lp3974_regulators[] = {
|
|
{ MAX8998_LDO2, &lp3974_ldo2_data },
|
|
{ MAX8998_LDO3, &lp3974_ldo3_data },
|
|
{ MAX8998_LDO4, &lp3974_ldo4_data },
|
|
{ MAX8998_LDO5, &lp3974_ldo5_data },
|
|
{ MAX8998_LDO6, &lp3974_ldo6_data },
|
|
{ MAX8998_LDO7, &lp3974_ldo7_data },
|
|
{ MAX8998_LDO8, &lp3974_ldo8_data },
|
|
{ MAX8998_LDO9, &lp3974_ldo9_data },
|
|
{ MAX8998_LDO10, &lp3974_ldo10_data },
|
|
{ MAX8998_LDO11, &lp3974_ldo11_data },
|
|
{ MAX8998_LDO12, &lp3974_ldo12_data },
|
|
{ MAX8998_LDO13, &lp3974_ldo13_data },
|
|
{ MAX8998_LDO14, &lp3974_ldo14_data },
|
|
{ MAX8998_LDO15, &lp3974_ldo15_data },
|
|
{ MAX8998_LDO16, &lp3974_ldo16_data },
|
|
{ MAX8998_LDO17, &lp3974_ldo17_data },
|
|
{ MAX8998_BUCK1, &lp3974_buck1_data },
|
|
{ MAX8998_BUCK2, &lp3974_buck2_data },
|
|
{ MAX8998_BUCK3, &lp3974_buck3_data },
|
|
{ MAX8998_BUCK4, &lp3974_buck4_data },
|
|
{ MAX8998_EN32KHZ_AP, &lp3974_32khz_ap_data },
|
|
{ MAX8998_EN32KHZ_CP, &lp3974_32khz_cp_data },
|
|
{ MAX8998_ENVICHG, &lp3974_vichg_data },
|
|
{ MAX8998_ESAFEOUT1, &lp3974_esafeout1_data },
|
|
{ MAX8998_ESAFEOUT2, &lp3974_esafeout2_data },
|
|
};
|
|
|
|
static struct max8998_platform_data universal_lp3974_pdata = {
|
|
.num_regulators = ARRAY_SIZE(lp3974_regulators),
|
|
.regulators = lp3974_regulators,
|
|
.buck1_voltage1 = 1100000, /* INT */
|
|
.buck1_voltage2 = 1000000,
|
|
.buck1_voltage3 = 1100000,
|
|
.buck1_voltage4 = 1000000,
|
|
.buck1_set1 = EXYNOS4_GPX0(5),
|
|
.buck1_set2 = EXYNOS4_GPX0(6),
|
|
.buck2_voltage1 = 1200000, /* G3D */
|
|
.buck2_voltage2 = 1100000,
|
|
.buck1_default_idx = 0,
|
|
.buck2_set3 = EXYNOS4_GPE2(0),
|
|
.buck2_default_idx = 0,
|
|
.wakeup = true,
|
|
};
|
|
|
|
|
|
enum fixed_regulator_id {
|
|
FIXED_REG_ID_MMC0,
|
|
FIXED_REG_ID_HDMI_5V,
|
|
FIXED_REG_ID_CAM_S_IF,
|
|
FIXED_REG_ID_CAM_I_CORE,
|
|
FIXED_REG_ID_CAM_VT_DIO,
|
|
};
|
|
|
|
static struct regulator_consumer_supply hdmi_fixed_consumer =
|
|
REGULATOR_SUPPLY("hdmi-en", "exynos4-hdmi");
|
|
|
|
static struct regulator_init_data hdmi_fixed_voltage_init_data = {
|
|
.constraints = {
|
|
.name = "HDMI_5V",
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = 1,
|
|
.consumer_supplies = &hdmi_fixed_consumer,
|
|
};
|
|
|
|
static struct fixed_voltage_config hdmi_fixed_voltage_config = {
|
|
.supply_name = "HDMI_EN1",
|
|
.microvolts = 5000000,
|
|
.gpio = EXYNOS4_GPE0(1),
|
|
.enable_high = true,
|
|
.init_data = &hdmi_fixed_voltage_init_data,
|
|
};
|
|
|
|
static struct platform_device hdmi_fixed_voltage = {
|
|
.name = "reg-fixed-voltage",
|
|
.id = FIXED_REG_ID_HDMI_5V,
|
|
.dev = {
|
|
.platform_data = &hdmi_fixed_voltage_config,
|
|
},
|
|
};
|
|
|
|
/* GPIO I2C 5 (PMIC) */
|
|
static struct i2c_board_info i2c5_devs[] __initdata = {
|
|
{
|
|
I2C_BOARD_INFO("max8952", 0xC0 >> 1),
|
|
.platform_data = &universal_max8952_pdata,
|
|
}, {
|
|
I2C_BOARD_INFO("lp3974", 0xCC >> 1),
|
|
.platform_data = &universal_lp3974_pdata,
|
|
},
|
|
};
|
|
|
|
/* I2C3 (TSP) */
|
|
static struct mxt_platform_data qt602240_platform_data = {
|
|
.x_line = 19,
|
|
.y_line = 11,
|
|
.x_size = 800,
|
|
.y_size = 480,
|
|
.blen = 0x11,
|
|
.threshold = 0x28,
|
|
.voltage = 2800000, /* 2.8V */
|
|
.orient = MXT_DIAGONAL,
|
|
.irqflags = IRQF_TRIGGER_FALLING,
|
|
};
|
|
|
|
static struct i2c_board_info i2c3_devs[] __initdata = {
|
|
{
|
|
I2C_BOARD_INFO("qt602240_ts", 0x4a),
|
|
.platform_data = &qt602240_platform_data,
|
|
},
|
|
};
|
|
|
|
static void __init universal_tsp_init(void)
|
|
{
|
|
int gpio;
|
|
|
|
/* TSP_LDO_ON: XMDMADDR_11 */
|
|
gpio = EXYNOS4_GPE2(3);
|
|
gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "TSP_LDO_ON");
|
|
gpio_export(gpio, 0);
|
|
|
|
/* TSP_INT: XMDMADDR_7 */
|
|
gpio = EXYNOS4_GPE1(7);
|
|
gpio_request(gpio, "TSP_INT");
|
|
|
|
s5p_register_gpio_interrupt(gpio);
|
|
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
|
|
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
|
|
i2c3_devs[0].irq = gpio_to_irq(gpio);
|
|
}
|
|
|
|
|
|
/* GPIO I2C 12 (3 Touchkey) */
|
|
static uint32_t touchkey_keymap[] = {
|
|
/* MCS_KEY_MAP(value, keycode) */
|
|
MCS_KEY_MAP(0, KEY_MENU), /* KEY_SEND */
|
|
MCS_KEY_MAP(1, KEY_BACK), /* KEY_END */
|
|
};
|
|
|
|
static struct mcs_platform_data touchkey_data = {
|
|
.keymap = touchkey_keymap,
|
|
.keymap_size = ARRAY_SIZE(touchkey_keymap),
|
|
.key_maxval = 2,
|
|
};
|
|
|
|
/* GPIO I2C 3_TOUCH 2.8V */
|
|
#define I2C_GPIO_BUS_12 12
|
|
static struct i2c_gpio_platform_data i2c_gpio12_data = {
|
|
.sda_pin = EXYNOS4_GPE4(0), /* XMDMDATA_8 */
|
|
.scl_pin = EXYNOS4_GPE4(1), /* XMDMDATA_9 */
|
|
};
|
|
|
|
static struct platform_device i2c_gpio12 = {
|
|
.name = "i2c-gpio",
|
|
.id = I2C_GPIO_BUS_12,
|
|
.dev = {
|
|
.platform_data = &i2c_gpio12_data,
|
|
},
|
|
};
|
|
|
|
static struct i2c_board_info i2c_gpio12_devs[] __initdata = {
|
|
{
|
|
I2C_BOARD_INFO("mcs5080_touchkey", 0x20),
|
|
.platform_data = &touchkey_data,
|
|
},
|
|
};
|
|
|
|
static void __init universal_touchkey_init(void)
|
|
{
|
|
int gpio;
|
|
|
|
gpio = EXYNOS4_GPE3(7); /* XMDMDATA_7 */
|
|
gpio_request(gpio, "3_TOUCH_INT");
|
|
s5p_register_gpio_interrupt(gpio);
|
|
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
|
|
i2c_gpio12_devs[0].irq = gpio_to_irq(gpio);
|
|
|
|
gpio = EXYNOS4_GPE3(3); /* XMDMDATA_3 */
|
|
gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "3_TOUCH_EN");
|
|
}
|
|
|
|
static struct s3c2410_platform_i2c universal_i2c0_platdata __initdata = {
|
|
.frequency = 300 * 1000,
|
|
.sda_delay = 200,
|
|
};
|
|
|
|
/* GPIO KEYS */
|
|
static struct gpio_keys_button universal_gpio_keys_tables[] = {
|
|
{
|
|
.code = KEY_VOLUMEUP,
|
|
.gpio = EXYNOS4_GPX2(0), /* XEINT16 */
|
|
.desc = "gpio-keys: KEY_VOLUMEUP",
|
|
.type = EV_KEY,
|
|
.active_low = 1,
|
|
.debounce_interval = 1,
|
|
}, {
|
|
.code = KEY_VOLUMEDOWN,
|
|
.gpio = EXYNOS4_GPX2(1), /* XEINT17 */
|
|
.desc = "gpio-keys: KEY_VOLUMEDOWN",
|
|
.type = EV_KEY,
|
|
.active_low = 1,
|
|
.debounce_interval = 1,
|
|
}, {
|
|
.code = KEY_CONFIG,
|
|
.gpio = EXYNOS4_GPX2(2), /* XEINT18 */
|
|
.desc = "gpio-keys: KEY_CONFIG",
|
|
.type = EV_KEY,
|
|
.active_low = 1,
|
|
.debounce_interval = 1,
|
|
}, {
|
|
.code = KEY_CAMERA,
|
|
.gpio = EXYNOS4_GPX2(3), /* XEINT19 */
|
|
.desc = "gpio-keys: KEY_CAMERA",
|
|
.type = EV_KEY,
|
|
.active_low = 1,
|
|
.debounce_interval = 1,
|
|
}, {
|
|
.code = KEY_OK,
|
|
.gpio = EXYNOS4_GPX3(5), /* XEINT29 */
|
|
.desc = "gpio-keys: KEY_OK",
|
|
.type = EV_KEY,
|
|
.active_low = 1,
|
|
.debounce_interval = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_platform_data universal_gpio_keys_data = {
|
|
.buttons = universal_gpio_keys_tables,
|
|
.nbuttons = ARRAY_SIZE(universal_gpio_keys_tables),
|
|
};
|
|
|
|
static struct platform_device universal_gpio_keys = {
|
|
.name = "gpio-keys",
|
|
.dev = {
|
|
.platform_data = &universal_gpio_keys_data,
|
|
},
|
|
};
|
|
|
|
/* eMMC */
|
|
static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = {
|
|
.max_width = 8,
|
|
.host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
|
|
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
|
|
.host_caps2 = MMC_CAP2_BROKEN_VOLTAGE,
|
|
.cd_type = S3C_SDHCI_CD_PERMANENT,
|
|
};
|
|
|
|
static struct regulator_consumer_supply mmc0_supplies[] = {
|
|
REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.0"),
|
|
};
|
|
|
|
static struct regulator_init_data mmc0_fixed_voltage_init_data = {
|
|
.constraints = {
|
|
.name = "VMEM_VDD_2.8V",
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(mmc0_supplies),
|
|
.consumer_supplies = mmc0_supplies,
|
|
};
|
|
|
|
static struct fixed_voltage_config mmc0_fixed_voltage_config = {
|
|
.supply_name = "MASSMEMORY_EN",
|
|
.microvolts = 2800000,
|
|
.gpio = EXYNOS4_GPE1(3),
|
|
.enable_high = true,
|
|
.init_data = &mmc0_fixed_voltage_init_data,
|
|
};
|
|
|
|
static struct platform_device mmc0_fixed_voltage = {
|
|
.name = "reg-fixed-voltage",
|
|
.id = FIXED_REG_ID_MMC0,
|
|
.dev = {
|
|
.platform_data = &mmc0_fixed_voltage_config,
|
|
},
|
|
};
|
|
|
|
/* SD */
|
|
static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = {
|
|
.max_width = 4,
|
|
.host_caps = MMC_CAP_4_BIT_DATA |
|
|
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
|
|
.ext_cd_gpio = EXYNOS4_GPX3(4), /* XEINT_28 */
|
|
.ext_cd_gpio_invert = 1,
|
|
.cd_type = S3C_SDHCI_CD_GPIO,
|
|
};
|
|
|
|
/* WiFi */
|
|
static struct s3c_sdhci_platdata universal_hsmmc3_data __initdata = {
|
|
.max_width = 4,
|
|
.host_caps = MMC_CAP_4_BIT_DATA |
|
|
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
|
|
.cd_type = S3C_SDHCI_CD_EXTERNAL,
|
|
};
|
|
|
|
static void __init universal_sdhci_init(void)
|
|
{
|
|
s3c_sdhci0_set_platdata(&universal_hsmmc0_data);
|
|
s3c_sdhci2_set_platdata(&universal_hsmmc2_data);
|
|
s3c_sdhci3_set_platdata(&universal_hsmmc3_data);
|
|
}
|
|
|
|
/* I2C1 */
|
|
static struct i2c_board_info i2c1_devs[] __initdata = {
|
|
/* Gyro, To be updated */
|
|
};
|
|
|
|
#ifdef CONFIG_DRM_EXYNOS
|
|
static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
|
|
.panel = {
|
|
.timing = {
|
|
.left_margin = 16,
|
|
.right_margin = 16,
|
|
.upper_margin = 2,
|
|
.lower_margin = 28,
|
|
.hsync_len = 2,
|
|
.vsync_len = 1,
|
|
.xres = 480,
|
|
.yres = 800,
|
|
.refresh = 55,
|
|
},
|
|
},
|
|
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
|
|
VIDCON0_CLKSEL_LCD,
|
|
.vidcon1 = VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
|
|
| VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
|
|
.default_win = 3,
|
|
.bpp = 32,
|
|
};
|
|
#else
|
|
/* Frame Buffer */
|
|
static struct s3c_fb_pd_win universal_fb_win0 = {
|
|
.max_bpp = 32,
|
|
.default_bpp = 16,
|
|
.xres = 480,
|
|
.yres = 800,
|
|
.virtual_x = 480,
|
|
.virtual_y = 2 * 800,
|
|
};
|
|
|
|
static struct fb_videomode universal_lcd_timing = {
|
|
.left_margin = 16,
|
|
.right_margin = 16,
|
|
.upper_margin = 2,
|
|
.lower_margin = 28,
|
|
.hsync_len = 2,
|
|
.vsync_len = 1,
|
|
.xres = 480,
|
|
.yres = 800,
|
|
.refresh = 55,
|
|
};
|
|
|
|
static struct s3c_fb_platdata universal_lcd_pdata __initdata = {
|
|
.win[0] = &universal_fb_win0,
|
|
.vtiming = &universal_lcd_timing,
|
|
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
|
|
VIDCON0_CLKSEL_LCD,
|
|
.vidcon1 = VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
|
|
| VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
|
|
.setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
|
|
};
|
|
#endif
|
|
|
|
static struct regulator_consumer_supply cam_vt_dio_supply =
|
|
REGULATOR_SUPPLY("vdd_core", "0-003c");
|
|
|
|
static struct regulator_init_data cam_vt_dio_reg_init_data = {
|
|
.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
|
|
.num_consumer_supplies = 1,
|
|
.consumer_supplies = &cam_vt_dio_supply,
|
|
};
|
|
|
|
static struct fixed_voltage_config cam_vt_dio_fixed_voltage_cfg = {
|
|
.supply_name = "CAM_VT_D_IO",
|
|
.microvolts = 2800000,
|
|
.gpio = EXYNOS4_GPE2(1), /* CAM_PWR_EN2 */
|
|
.enable_high = 1,
|
|
.init_data = &cam_vt_dio_reg_init_data,
|
|
};
|
|
|
|
static struct platform_device cam_vt_dio_fixed_reg_dev = {
|
|
.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_VT_DIO,
|
|
.dev = { .platform_data = &cam_vt_dio_fixed_voltage_cfg },
|
|
};
|
|
|
|
static struct regulator_consumer_supply cam_i_core_supply =
|
|
REGULATOR_SUPPLY("core", "0-001f");
|
|
|
|
static struct regulator_init_data cam_i_core_reg_init_data = {
|
|
.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
|
|
.num_consumer_supplies = 1,
|
|
.consumer_supplies = &cam_i_core_supply,
|
|
};
|
|
|
|
static struct fixed_voltage_config cam_i_core_fixed_voltage_cfg = {
|
|
.supply_name = "CAM_I_CORE_1.2V",
|
|
.microvolts = 1200000,
|
|
.gpio = EXYNOS4_GPE2(2), /* CAM_8M_CORE_EN */
|
|
.enable_high = 1,
|
|
.init_data = &cam_i_core_reg_init_data,
|
|
};
|
|
|
|
static struct platform_device cam_i_core_fixed_reg_dev = {
|
|
.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_I_CORE,
|
|
.dev = { .platform_data = &cam_i_core_fixed_voltage_cfg },
|
|
};
|
|
|
|
static struct regulator_consumer_supply cam_s_if_supply =
|
|
REGULATOR_SUPPLY("d_sensor", "0-001f");
|
|
|
|
static struct regulator_init_data cam_s_if_reg_init_data = {
|
|
.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
|
|
.num_consumer_supplies = 1,
|
|
.consumer_supplies = &cam_s_if_supply,
|
|
};
|
|
|
|
static struct fixed_voltage_config cam_s_if_fixed_voltage_cfg = {
|
|
.supply_name = "CAM_S_IF_1.8V",
|
|
.microvolts = 1800000,
|
|
.gpio = EXYNOS4_GPE3(0), /* CAM_PWR_EN1 */
|
|
.enable_high = 1,
|
|
.init_data = &cam_s_if_reg_init_data,
|
|
};
|
|
|
|
static struct platform_device cam_s_if_fixed_reg_dev = {
|
|
.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_S_IF,
|
|
.dev = { .platform_data = &cam_s_if_fixed_voltage_cfg },
|
|
};
|
|
|
|
static struct s5p_platform_mipi_csis mipi_csis_platdata = {
|
|
.clk_rate = 166000000UL,
|
|
.lanes = 2,
|
|
.hs_settle = 12,
|
|
};
|
|
|
|
#define GPIO_CAM_LEVEL_EN(n) EXYNOS4_GPE4(n + 3)
|
|
#define GPIO_CAM_8M_ISP_INT EXYNOS4_GPX1(5) /* XEINT_13 */
|
|
#define GPIO_CAM_MEGA_nRST EXYNOS4_GPE2(5)
|
|
#define GPIO_CAM_VGA_NRST EXYNOS4_GPE4(7)
|
|
#define GPIO_CAM_VGA_NSTBY EXYNOS4_GPE4(6)
|
|
|
|
static int s5k6aa_set_power(int on)
|
|
{
|
|
gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on);
|
|
return 0;
|
|
}
|
|
|
|
static struct s5k6aa_platform_data s5k6aa_platdata = {
|
|
.mclk_frequency = 21600000UL,
|
|
.gpio_reset = { GPIO_CAM_VGA_NRST, 0 },
|
|
.gpio_stby = { GPIO_CAM_VGA_NSTBY, 0 },
|
|
.bus_type = V4L2_MBUS_PARALLEL,
|
|
.horiz_flip = 1,
|
|
.set_power = s5k6aa_set_power,
|
|
};
|
|
|
|
static struct i2c_board_info s5k6aa_board_info = {
|
|
I2C_BOARD_INFO("S5K6AA", 0x3C),
|
|
.platform_data = &s5k6aa_platdata,
|
|
};
|
|
|
|
static int m5mols_set_power(struct device *dev, int on)
|
|
{
|
|
gpio_set_value(GPIO_CAM_LEVEL_EN(1), !on);
|
|
gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on);
|
|
return 0;
|
|
}
|
|
|
|
static struct m5mols_platform_data m5mols_platdata = {
|
|
.gpio_reset = GPIO_CAM_MEGA_nRST,
|
|
.reset_polarity = 0,
|
|
.set_power = m5mols_set_power,
|
|
};
|
|
|
|
static struct i2c_board_info m5mols_board_info = {
|
|
I2C_BOARD_INFO("M5MOLS", 0x1F),
|
|
.platform_data = &m5mols_platdata,
|
|
};
|
|
|
|
static struct s5p_fimc_isp_info universal_camera_sensors[] = {
|
|
{
|
|
.mux_id = 0,
|
|
.flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
|
|
V4L2_MBUS_VSYNC_ACTIVE_LOW,
|
|
.bus_type = FIMC_ITU_601,
|
|
.board_info = &s5k6aa_board_info,
|
|
.i2c_bus_num = 0,
|
|
.clk_frequency = 24000000UL,
|
|
}, {
|
|
.mux_id = 0,
|
|
.flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
|
|
V4L2_MBUS_VSYNC_ACTIVE_LOW,
|
|
.bus_type = FIMC_MIPI_CSI2,
|
|
.board_info = &m5mols_board_info,
|
|
.i2c_bus_num = 0,
|
|
.clk_frequency = 24000000UL,
|
|
},
|
|
};
|
|
|
|
static struct s5p_platform_fimc fimc_md_platdata = {
|
|
.isp_info = universal_camera_sensors,
|
|
.num_clients = ARRAY_SIZE(universal_camera_sensors),
|
|
};
|
|
|
|
static struct gpio universal_camera_gpios[] = {
|
|
{ GPIO_CAM_LEVEL_EN(1), GPIOF_OUT_INIT_HIGH, "CAM_LVL_EN1" },
|
|
{ GPIO_CAM_LEVEL_EN(2), GPIOF_OUT_INIT_LOW, "CAM_LVL_EN2" },
|
|
{ GPIO_CAM_8M_ISP_INT, GPIOF_IN, "8M_ISP_INT" },
|
|
{ GPIO_CAM_MEGA_nRST, GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" },
|
|
{ GPIO_CAM_VGA_NRST, GPIOF_OUT_INIT_LOW, "CAM_VGA_NRST" },
|
|
{ GPIO_CAM_VGA_NSTBY, GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" },
|
|
};
|
|
|
|
/* USB OTG */
|
|
static struct s3c_hsotg_plat universal_hsotg_pdata;
|
|
|
|
static void __init universal_camera_init(void)
|
|
{
|
|
s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
|
|
&s5p_device_mipi_csis0);
|
|
s3c_set_platdata(&fimc_md_platdata, sizeof(fimc_md_platdata),
|
|
&s5p_device_fimc_md);
|
|
|
|
if (gpio_request_array(universal_camera_gpios,
|
|
ARRAY_SIZE(universal_camera_gpios))) {
|
|
pr_err("%s: GPIO request failed\n", __func__);
|
|
return;
|
|
}
|
|
|
|
if (!s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xf)))
|
|
m5mols_board_info.irq = gpio_to_irq(GPIO_CAM_8M_ISP_INT);
|
|
else
|
|
pr_err("Failed to configure 8M_ISP_INT GPIO\n");
|
|
|
|
/* Free GPIOs controlled directly by the sensor drivers. */
|
|
gpio_free(GPIO_CAM_MEGA_nRST);
|
|
gpio_free(GPIO_CAM_8M_ISP_INT);
|
|
gpio_free(GPIO_CAM_VGA_NRST);
|
|
gpio_free(GPIO_CAM_VGA_NSTBY);
|
|
|
|
if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A))
|
|
pr_err("Camera port A setup failed\n");
|
|
}
|
|
|
|
static struct platform_device *universal_devices[] __initdata = {
|
|
/* Samsung Platform Devices */
|
|
&s5p_device_mipi_csis0,
|
|
&s5p_device_fimc0,
|
|
&s5p_device_fimc1,
|
|
&s5p_device_fimc2,
|
|
&s5p_device_fimc3,
|
|
&s5p_device_g2d,
|
|
&mmc0_fixed_voltage,
|
|
&s3c_device_hsmmc0,
|
|
&s3c_device_hsmmc2,
|
|
&s3c_device_hsmmc3,
|
|
&s3c_device_i2c0,
|
|
&s3c_device_i2c3,
|
|
&s3c_device_i2c5,
|
|
&s5p_device_i2c_hdmiphy,
|
|
&hdmi_fixed_voltage,
|
|
&s5p_device_hdmi,
|
|
&s5p_device_sdo,
|
|
&s5p_device_mixer,
|
|
|
|
/* Universal Devices */
|
|
&i2c_gpio12,
|
|
&universal_gpio_keys,
|
|
&s5p_device_onenand,
|
|
&s5p_device_fimd0,
|
|
&s5p_device_jpeg,
|
|
#ifdef CONFIG_DRM_EXYNOS
|
|
&exynos_device_drm,
|
|
#endif
|
|
&s3c_device_usb_hsotg,
|
|
&s5p_device_mfc,
|
|
&s5p_device_mfc_l,
|
|
&s5p_device_mfc_r,
|
|
&cam_vt_dio_fixed_reg_dev,
|
|
&cam_i_core_fixed_reg_dev,
|
|
&cam_s_if_fixed_reg_dev,
|
|
&s5p_device_fimc_md,
|
|
};
|
|
|
|
static void __init universal_map_io(void)
|
|
{
|
|
exynos_init_io(NULL, 0);
|
|
s3c24xx_init_clocks(clk_xusbxti.rate);
|
|
s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
|
|
s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
|
|
}
|
|
|
|
static void s5p_tv_setup(void)
|
|
{
|
|
/* direct HPD to HDMI chip */
|
|
gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug");
|
|
s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
|
|
s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
|
|
}
|
|
|
|
static void __init universal_reserve(void)
|
|
{
|
|
s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
|
|
}
|
|
|
|
static void __init universal_machine_init(void)
|
|
{
|
|
universal_sdhci_init();
|
|
s5p_tv_setup();
|
|
|
|
s3c_i2c0_set_platdata(&universal_i2c0_platdata);
|
|
i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
|
|
|
|
universal_tsp_init();
|
|
s3c_i2c3_set_platdata(NULL);
|
|
i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
|
|
|
|
s3c_i2c5_set_platdata(NULL);
|
|
s5p_i2c_hdmiphy_set_platdata(NULL);
|
|
i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
|
|
|
|
#ifdef CONFIG_DRM_EXYNOS
|
|
s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
|
|
exynos4_fimd0_gpio_setup_24bpp();
|
|
#else
|
|
s5p_fimd0_set_platdata(&universal_lcd_pdata);
|
|
#endif
|
|
|
|
universal_touchkey_init();
|
|
i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
|
|
ARRAY_SIZE(i2c_gpio12_devs));
|
|
|
|
s3c_hsotg_set_platdata(&universal_hsotg_pdata);
|
|
universal_camera_init();
|
|
|
|
/* Last */
|
|
platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
|
|
}
|
|
|
|
MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
|
|
/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
|
|
.atag_offset = 0x100,
|
|
.smp = smp_ops(exynos_smp_ops),
|
|
.init_irq = exynos4_init_irq,
|
|
.map_io = universal_map_io,
|
|
.handle_irq = gic_handle_irq,
|
|
.init_machine = universal_machine_init,
|
|
.init_late = exynos_init_late,
|
|
.timer = &s5p_timer,
|
|
.reserve = &universal_reserve,
|
|
.restart = exynos4_restart,
|
|
MACHINE_END
|