mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 19:00:25 +00:00
![Michael Buesch](/assets/img/avatar_default.png)
This adds support for the SSB PMU. A PMU is found on Low-Power devices. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
486 lines
13 KiB
C
486 lines
13 KiB
C
/*
|
|
* Sonics Silicon Backplane
|
|
* Broadcom ChipCommon core driver
|
|
*
|
|
* Copyright 2005, Broadcom Corporation
|
|
* Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
|
|
*
|
|
* Licensed under the GNU/GPL. See COPYING for details.
|
|
*/
|
|
|
|
#include <linux/ssb/ssb.h>
|
|
#include <linux/ssb/ssb_regs.h>
|
|
#include <linux/pci.h>
|
|
|
|
#include "ssb_private.h"
|
|
|
|
|
|
/* Clock sources */
|
|
enum ssb_clksrc {
|
|
/* PCI clock */
|
|
SSB_CHIPCO_CLKSRC_PCI,
|
|
/* Crystal slow clock oscillator */
|
|
SSB_CHIPCO_CLKSRC_XTALOS,
|
|
/* Low power oscillator */
|
|
SSB_CHIPCO_CLKSRC_LOPWROS,
|
|
};
|
|
|
|
|
|
static inline u32 chipco_write32_masked(struct ssb_chipcommon *cc, u16 offset,
|
|
u32 mask, u32 value)
|
|
{
|
|
value &= mask;
|
|
value |= chipco_read32(cc, offset) & ~mask;
|
|
chipco_write32(cc, offset, value);
|
|
|
|
return value;
|
|
}
|
|
|
|
void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
|
|
enum ssb_clkmode mode)
|
|
{
|
|
struct ssb_device *ccdev = cc->dev;
|
|
struct ssb_bus *bus;
|
|
u32 tmp;
|
|
|
|
if (!ccdev)
|
|
return;
|
|
bus = ccdev->bus;
|
|
/* chipcommon cores prior to rev6 don't support dynamic clock control */
|
|
if (ccdev->id.revision < 6)
|
|
return;
|
|
/* chipcommon cores rev10 are a whole new ball game */
|
|
if (ccdev->id.revision >= 10)
|
|
return;
|
|
if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
|
|
return;
|
|
|
|
switch (mode) {
|
|
case SSB_CLKMODE_SLOW:
|
|
tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
|
|
tmp |= SSB_CHIPCO_SLOWCLKCTL_FSLOW;
|
|
chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
|
|
break;
|
|
case SSB_CLKMODE_FAST:
|
|
ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */
|
|
tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
|
|
tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
|
|
tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL;
|
|
chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
|
|
break;
|
|
case SSB_CLKMODE_DYNAMIC:
|
|
tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
|
|
tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
|
|
tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL;
|
|
tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
|
|
if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) != SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL)
|
|
tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
|
|
chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
|
|
|
|
/* for dynamic control, we have to release our xtal_pu "force on" */
|
|
if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL)
|
|
ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0);
|
|
break;
|
|
default:
|
|
SSB_WARN_ON(1);
|
|
}
|
|
}
|
|
|
|
/* Get the Slow Clock Source */
|
|
static enum ssb_clksrc chipco_pctl_get_slowclksrc(struct ssb_chipcommon *cc)
|
|
{
|
|
struct ssb_bus *bus = cc->dev->bus;
|
|
u32 uninitialized_var(tmp);
|
|
|
|
if (cc->dev->id.revision < 6) {
|
|
if (bus->bustype == SSB_BUSTYPE_SSB ||
|
|
bus->bustype == SSB_BUSTYPE_PCMCIA)
|
|
return SSB_CHIPCO_CLKSRC_XTALOS;
|
|
if (bus->bustype == SSB_BUSTYPE_PCI) {
|
|
pci_read_config_dword(bus->host_pci, SSB_GPIO_OUT, &tmp);
|
|
if (tmp & 0x10)
|
|
return SSB_CHIPCO_CLKSRC_PCI;
|
|
return SSB_CHIPCO_CLKSRC_XTALOS;
|
|
}
|
|
}
|
|
if (cc->dev->id.revision < 10) {
|
|
tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
|
|
tmp &= 0x7;
|
|
if (tmp == 0)
|
|
return SSB_CHIPCO_CLKSRC_LOPWROS;
|
|
if (tmp == 1)
|
|
return SSB_CHIPCO_CLKSRC_XTALOS;
|
|
if (tmp == 2)
|
|
return SSB_CHIPCO_CLKSRC_PCI;
|
|
}
|
|
|
|
return SSB_CHIPCO_CLKSRC_XTALOS;
|
|
}
|
|
|
|
/* Get maximum or minimum (depending on get_max flag) slowclock frequency. */
|
|
static int chipco_pctl_clockfreqlimit(struct ssb_chipcommon *cc, int get_max)
|
|
{
|
|
int uninitialized_var(limit);
|
|
enum ssb_clksrc clocksrc;
|
|
int divisor = 1;
|
|
u32 tmp;
|
|
|
|
clocksrc = chipco_pctl_get_slowclksrc(cc);
|
|
if (cc->dev->id.revision < 6) {
|
|
switch (clocksrc) {
|
|
case SSB_CHIPCO_CLKSRC_PCI:
|
|
divisor = 64;
|
|
break;
|
|
case SSB_CHIPCO_CLKSRC_XTALOS:
|
|
divisor = 32;
|
|
break;
|
|
default:
|
|
SSB_WARN_ON(1);
|
|
}
|
|
} else if (cc->dev->id.revision < 10) {
|
|
switch (clocksrc) {
|
|
case SSB_CHIPCO_CLKSRC_LOPWROS:
|
|
break;
|
|
case SSB_CHIPCO_CLKSRC_XTALOS:
|
|
case SSB_CHIPCO_CLKSRC_PCI:
|
|
tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
|
|
divisor = (tmp >> 16) + 1;
|
|
divisor *= 4;
|
|
break;
|
|
}
|
|
} else {
|
|
tmp = chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL);
|
|
divisor = (tmp >> 16) + 1;
|
|
divisor *= 4;
|
|
}
|
|
|
|
switch (clocksrc) {
|
|
case SSB_CHIPCO_CLKSRC_LOPWROS:
|
|
if (get_max)
|
|
limit = 43000;
|
|
else
|
|
limit = 25000;
|
|
break;
|
|
case SSB_CHIPCO_CLKSRC_XTALOS:
|
|
if (get_max)
|
|
limit = 20200000;
|
|
else
|
|
limit = 19800000;
|
|
break;
|
|
case SSB_CHIPCO_CLKSRC_PCI:
|
|
if (get_max)
|
|
limit = 34000000;
|
|
else
|
|
limit = 25000000;
|
|
break;
|
|
}
|
|
limit /= divisor;
|
|
|
|
return limit;
|
|
}
|
|
|
|
static void chipco_powercontrol_init(struct ssb_chipcommon *cc)
|
|
{
|
|
struct ssb_bus *bus = cc->dev->bus;
|
|
|
|
if (bus->chip_id == 0x4321) {
|
|
if (bus->chip_rev == 0)
|
|
chipco_write32(cc, SSB_CHIPCO_CHIPCTL, 0x3A4);
|
|
else if (bus->chip_rev == 1)
|
|
chipco_write32(cc, SSB_CHIPCO_CHIPCTL, 0xA4);
|
|
}
|
|
|
|
if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
|
|
return;
|
|
|
|
if (cc->dev->id.revision >= 10) {
|
|
/* Set Idle Power clock rate to 1Mhz */
|
|
chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL,
|
|
(chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) &
|
|
0x0000FFFF) | 0x00040000);
|
|
} else {
|
|
int maxfreq;
|
|
|
|
maxfreq = chipco_pctl_clockfreqlimit(cc, 1);
|
|
chipco_write32(cc, SSB_CHIPCO_PLLONDELAY,
|
|
(maxfreq * 150 + 999999) / 1000000);
|
|
chipco_write32(cc, SSB_CHIPCO_FREFSELDELAY,
|
|
(maxfreq * 15 + 999999) / 1000000);
|
|
}
|
|
}
|
|
|
|
static void calc_fast_powerup_delay(struct ssb_chipcommon *cc)
|
|
{
|
|
struct ssb_bus *bus = cc->dev->bus;
|
|
int minfreq;
|
|
unsigned int tmp;
|
|
u32 pll_on_delay;
|
|
|
|
if (bus->bustype != SSB_BUSTYPE_PCI)
|
|
return;
|
|
if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
|
|
return;
|
|
|
|
minfreq = chipco_pctl_clockfreqlimit(cc, 0);
|
|
pll_on_delay = chipco_read32(cc, SSB_CHIPCO_PLLONDELAY);
|
|
tmp = (((pll_on_delay + 2) * 1000000) + (minfreq - 1)) / minfreq;
|
|
SSB_WARN_ON(tmp & ~0xFFFF);
|
|
|
|
cc->fast_pwrup_delay = tmp;
|
|
}
|
|
|
|
void ssb_chipcommon_init(struct ssb_chipcommon *cc)
|
|
{
|
|
if (!cc->dev)
|
|
return; /* We don't have a ChipCommon */
|
|
ssb_pmu_init(cc);
|
|
chipco_powercontrol_init(cc);
|
|
ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
|
|
calc_fast_powerup_delay(cc);
|
|
}
|
|
|
|
void ssb_chipco_suspend(struct ssb_chipcommon *cc)
|
|
{
|
|
if (!cc->dev)
|
|
return;
|
|
ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW);
|
|
}
|
|
|
|
void ssb_chipco_resume(struct ssb_chipcommon *cc)
|
|
{
|
|
if (!cc->dev)
|
|
return;
|
|
chipco_powercontrol_init(cc);
|
|
ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
|
|
}
|
|
|
|
/* Get the processor clock */
|
|
void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
|
|
u32 *plltype, u32 *n, u32 *m)
|
|
{
|
|
*n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
|
|
*plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
|
|
switch (*plltype) {
|
|
case SSB_PLLTYPE_2:
|
|
case SSB_PLLTYPE_4:
|
|
case SSB_PLLTYPE_6:
|
|
case SSB_PLLTYPE_7:
|
|
*m = chipco_read32(cc, SSB_CHIPCO_CLOCK_MIPS);
|
|
break;
|
|
case SSB_PLLTYPE_3:
|
|
/* 5350 uses m2 to control mips */
|
|
*m = chipco_read32(cc, SSB_CHIPCO_CLOCK_M2);
|
|
break;
|
|
default:
|
|
*m = chipco_read32(cc, SSB_CHIPCO_CLOCK_SB);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Get the bus clock */
|
|
void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
|
|
u32 *plltype, u32 *n, u32 *m)
|
|
{
|
|
*n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
|
|
*plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
|
|
switch (*plltype) {
|
|
case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
|
|
*m = chipco_read32(cc, SSB_CHIPCO_CLOCK_MIPS);
|
|
break;
|
|
case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
|
|
if (cc->dev->bus->chip_id != 0x5365) {
|
|
*m = chipco_read32(cc, SSB_CHIPCO_CLOCK_M2);
|
|
break;
|
|
}
|
|
/* Fallthough */
|
|
default:
|
|
*m = chipco_read32(cc, SSB_CHIPCO_CLOCK_SB);
|
|
}
|
|
}
|
|
|
|
void ssb_chipco_timing_init(struct ssb_chipcommon *cc,
|
|
unsigned long ns)
|
|
{
|
|
struct ssb_device *dev = cc->dev;
|
|
struct ssb_bus *bus = dev->bus;
|
|
u32 tmp;
|
|
|
|
/* set register for external IO to control LED. */
|
|
chipco_write32(cc, SSB_CHIPCO_PROG_CFG, 0x11);
|
|
tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT; /* Waitcount-3 = 10ns */
|
|
tmp |= DIV_ROUND_UP(40, ns) << SSB_PROG_WCNT_1_SHIFT; /* Waitcount-1 = 40ns */
|
|
tmp |= DIV_ROUND_UP(240, ns); /* Waitcount-0 = 240ns */
|
|
chipco_write32(cc, SSB_CHIPCO_PROG_WAITCNT, tmp); /* 0x01020a0c for a 100Mhz clock */
|
|
|
|
/* Set timing for the flash */
|
|
tmp = DIV_ROUND_UP(10, ns) << SSB_FLASH_WCNT_3_SHIFT; /* Waitcount-3 = 10nS */
|
|
tmp |= DIV_ROUND_UP(10, ns) << SSB_FLASH_WCNT_1_SHIFT; /* Waitcount-1 = 10nS */
|
|
tmp |= DIV_ROUND_UP(120, ns); /* Waitcount-0 = 120nS */
|
|
if ((bus->chip_id == 0x5365) ||
|
|
(dev->id.revision < 9))
|
|
chipco_write32(cc, SSB_CHIPCO_FLASH_WAITCNT, tmp);
|
|
if ((bus->chip_id == 0x5365) ||
|
|
(dev->id.revision < 9) ||
|
|
((bus->chip_id == 0x5350) && (bus->chip_rev == 0)))
|
|
chipco_write32(cc, SSB_CHIPCO_PCMCIA_MEMWAIT, tmp);
|
|
|
|
if (bus->chip_id == 0x5350) {
|
|
/* Enable EXTIF */
|
|
tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT; /* Waitcount-3 = 10ns */
|
|
tmp |= DIV_ROUND_UP(20, ns) << SSB_PROG_WCNT_2_SHIFT; /* Waitcount-2 = 20ns */
|
|
tmp |= DIV_ROUND_UP(100, ns) << SSB_PROG_WCNT_1_SHIFT; /* Waitcount-1 = 100ns */
|
|
tmp |= DIV_ROUND_UP(120, ns); /* Waitcount-0 = 120ns */
|
|
chipco_write32(cc, SSB_CHIPCO_PROG_WAITCNT, tmp); /* 0x01020a0c for a 100Mhz clock */
|
|
}
|
|
}
|
|
|
|
/* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
|
|
void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, u32 ticks)
|
|
{
|
|
/* instant NMI */
|
|
chipco_write32(cc, SSB_CHIPCO_WATCHDOG, ticks);
|
|
}
|
|
|
|
void ssb_chipco_irq_mask(struct ssb_chipcommon *cc, u32 mask, u32 value)
|
|
{
|
|
chipco_write32_masked(cc, SSB_CHIPCO_IRQMASK, mask, value);
|
|
}
|
|
|
|
u32 ssb_chipco_irq_status(struct ssb_chipcommon *cc, u32 mask)
|
|
{
|
|
return chipco_read32(cc, SSB_CHIPCO_IRQSTAT) & mask;
|
|
}
|
|
|
|
u32 ssb_chipco_gpio_in(struct ssb_chipcommon *cc, u32 mask)
|
|
{
|
|
return chipco_read32(cc, SSB_CHIPCO_GPIOIN) & mask;
|
|
}
|
|
|
|
u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value)
|
|
{
|
|
return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value);
|
|
}
|
|
|
|
u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value)
|
|
{
|
|
return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value);
|
|
}
|
|
|
|
u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value)
|
|
{
|
|
return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
|
|
}
|
|
|
|
u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value)
|
|
{
|
|
return chipco_write32_masked(cc, SSB_CHIPCO_GPIOIRQ, mask, value);
|
|
}
|
|
|
|
u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value)
|
|
{
|
|
return chipco_write32_masked(cc, SSB_CHIPCO_GPIOPOL, mask, value);
|
|
}
|
|
|
|
#ifdef CONFIG_SSB_SERIAL
|
|
int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
|
|
struct ssb_serial_port *ports)
|
|
{
|
|
struct ssb_bus *bus = cc->dev->bus;
|
|
int nr_ports = 0;
|
|
u32 plltype;
|
|
unsigned int irq;
|
|
u32 baud_base, div;
|
|
u32 i, n;
|
|
unsigned int ccrev = cc->dev->id.revision;
|
|
|
|
plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
|
|
irq = ssb_mips_irq(cc->dev);
|
|
|
|
if (plltype == SSB_PLLTYPE_1) {
|
|
/* PLL clock */
|
|
baud_base = ssb_calc_clock_rate(plltype,
|
|
chipco_read32(cc, SSB_CHIPCO_CLOCK_N),
|
|
chipco_read32(cc, SSB_CHIPCO_CLOCK_M2));
|
|
div = 1;
|
|
} else {
|
|
if (ccrev == 20) {
|
|
/* BCM5354 uses constant 25MHz clock */
|
|
baud_base = 25000000;
|
|
div = 48;
|
|
/* Set the override bit so we don't divide it */
|
|
chipco_write32(cc, SSB_CHIPCO_CORECTL,
|
|
chipco_read32(cc, SSB_CHIPCO_CORECTL)
|
|
| SSB_CHIPCO_CORECTL_UARTCLK0);
|
|
} else if ((ccrev >= 11) && (ccrev != 15)) {
|
|
/* Fixed ALP clock */
|
|
baud_base = 20000000;
|
|
if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
|
|
/* FIXME: baud_base is different for devices with a PMU */
|
|
SSB_WARN_ON(1);
|
|
}
|
|
div = 1;
|
|
if (ccrev >= 21) {
|
|
/* Turn off UART clock before switching clocksource. */
|
|
chipco_write32(cc, SSB_CHIPCO_CORECTL,
|
|
chipco_read32(cc, SSB_CHIPCO_CORECTL)
|
|
& ~SSB_CHIPCO_CORECTL_UARTCLKEN);
|
|
}
|
|
/* Set the override bit so we don't divide it */
|
|
chipco_write32(cc, SSB_CHIPCO_CORECTL,
|
|
chipco_read32(cc, SSB_CHIPCO_CORECTL)
|
|
| SSB_CHIPCO_CORECTL_UARTCLK0);
|
|
if (ccrev >= 21) {
|
|
/* Re-enable the UART clock. */
|
|
chipco_write32(cc, SSB_CHIPCO_CORECTL,
|
|
chipco_read32(cc, SSB_CHIPCO_CORECTL)
|
|
| SSB_CHIPCO_CORECTL_UARTCLKEN);
|
|
}
|
|
} else if (ccrev >= 3) {
|
|
/* Internal backplane clock */
|
|
baud_base = ssb_clockspeed(bus);
|
|
div = chipco_read32(cc, SSB_CHIPCO_CLKDIV)
|
|
& SSB_CHIPCO_CLKDIV_UART;
|
|
} else {
|
|
/* Fixed internal backplane clock */
|
|
baud_base = 88000000;
|
|
div = 48;
|
|
}
|
|
|
|
/* Clock source depends on strapping if UartClkOverride is unset */
|
|
if ((ccrev > 0) &&
|
|
!(chipco_read32(cc, SSB_CHIPCO_CORECTL) & SSB_CHIPCO_CORECTL_UARTCLK0)) {
|
|
if ((cc->capabilities & SSB_CHIPCO_CAP_UARTCLK) ==
|
|
SSB_CHIPCO_CAP_UARTCLK_INT) {
|
|
/* Internal divided backplane clock */
|
|
baud_base /= div;
|
|
} else {
|
|
/* Assume external clock of 1.8432 MHz */
|
|
baud_base = 1843200;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Determine the registers of the UARTs */
|
|
n = (cc->capabilities & SSB_CHIPCO_CAP_NRUART);
|
|
for (i = 0; i < n; i++) {
|
|
void __iomem *cc_mmio;
|
|
void __iomem *uart_regs;
|
|
|
|
cc_mmio = cc->dev->bus->mmio + (cc->dev->core_index * SSB_CORE_SIZE);
|
|
uart_regs = cc_mmio + SSB_CHIPCO_UART0_DATA;
|
|
/* Offset changed at after rev 0 */
|
|
if (ccrev == 0)
|
|
uart_regs += (i * 8);
|
|
else
|
|
uart_regs += (i * 256);
|
|
|
|
nr_ports++;
|
|
ports[i].regs = uart_regs;
|
|
ports[i].irq = irq;
|
|
ports[i].baud_base = baud_base;
|
|
ports[i].reg_shift = 0;
|
|
}
|
|
|
|
return nr_ports;
|
|
}
|
|
#endif /* CONFIG_SSB_SERIAL */
|