linux-stable/drivers/usb/dwc3
Gratian Crisan b32b8f2b95 usb: dwc3: pci: skip BYT GPIO lookup table for hardwired phy
Hardware based on the Bay Trail / BYT SoCs require an external ULPI phy for
USB device-mode. The phy chip usually has its 'reset' and 'chip select'
lines connected to GPIOs described by ACPI fwnodes in the DSDT table.

Because of hardware with missing ACPI resources for the 'reset' and 'chip
select' GPIOs commit 5741022cbd ("usb: dwc3: pci: Add GPIO lookup table
on platforms without ACPI GPIO resources") introduced a fallback
gpiod_lookup_table with hard-coded mappings for Bay Trail devices.

However there are existing Bay Trail based devices, like the National
Instruments cRIO-903x series, where the phy chip has its 'reset' and
'chip-select' lines always asserted in hardware via resistor pull-ups. On
this hardware the phy chip is always enabled and the ACPI dsdt table is
missing information not only for the 'chip-select' and 'reset' lines but
also for the BYT GPIO controller itself "INT33FC".

With the introduction of the gpiod_lookup_table initializing the USB
device-mode on these hardware now errors out. The error comes from the
gpiod_get_optional() calls in dwc3_pci_quirks() which will now return an
-ENOENT error due to the missing ACPI entry for the INT33FC gpio controller
used in the aforementioned table.

This hardware used to work before because gpiod_get_optional() will return
NULL instead of -ENOENT if no GPIO has been assigned to the requested
function. The dwc3_pci_quirks() code for setting the 'cs' and 'reset' GPIOs
was then skipped (due to the NULL return). This is the correct behavior in
cases where the phy chip is hardwired and there are no GPIOs to control.

Since the gpiod_lookup_table relies on the presence of INT33FC fwnode
in ACPI tables only add the table if we know the entry for the INT33FC
gpio controller is present. This allows Bay Trail based devices with
hardwired dwc3 ULPI phys to continue working.

Fixes: 5741022cbd ("usb: dwc3: pci: Add GPIO lookup table on platforms without ACPI GPIO resources")
Cc: stable <stable@kernel.org>
Signed-off-by: Gratian Crisan <gratian.crisan@ni.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230726184555.218091-2-gratian.crisan@ni.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-27 10:37:01 +02:00
..
core.c Revert "usb: dwc3: core: Enable AutoRetry feature in the controller" 2023-07-25 17:42:38 +02:00
core.h Revert "usb: dwc3: core: Enable AutoRetry feature in the controller" 2023-07-25 17:42:38 +02:00
debug.h usb: dwc3: Add function suspend and function wakeup support 2023-03-29 10:27:01 +02:00
debugfs.c usb: dwc3: debugfs: Resume dwc3 before accessing registers 2023-05-13 17:56:22 +09:00
drd.c usb: dwc3: Don't switch OTG -> peripheral if extcon is present 2022-10-22 12:29:43 +02:00
dwc3-am62.c usb: dwc3-am62: Convert to platform remove callback returning void 2023-05-28 12:36:23 +01:00
dwc3-exynos.c usb: dwc3-exynos: Convert to platform remove callback returning void 2023-05-28 12:36:23 +01:00
dwc3-haps.c
dwc3-imx8mp.c usb: dwc3-imx8mp: Convert to platform remove callback returning void 2023-05-28 12:36:24 +01:00
dwc3-keystone.c usb: dwc3-keystone: Convert to platform remove callback returning void 2023-05-28 12:36:24 +01:00
dwc3-meson-g12a.c usb: dwc3-meson-g12a: Fix an error handling path in dwc3_meson_g12a_probe() 2023-06-13 11:59:01 +02:00
dwc3-of-simple.c usb: dwc3-of-simple: Convert to platform remove callback returning void 2023-05-28 12:36:24 +01:00
dwc3-omap.c usb: dwc3-omap: Convert to platform remove callback returning void 2023-05-28 12:36:24 +01:00
dwc3-pci.c usb: dwc3: pci: skip BYT GPIO lookup table for hardwired phy 2023-07-27 10:37:01 +02:00
dwc3-qcom.c USB / Thunderbolt driver updates for 6.5-rc1 2023-07-03 13:23:10 -07:00
dwc3-st.c usb: dwc3-st: Convert to platform remove callback returning void 2023-05-28 12:36:24 +01:00
dwc3-xilinx.c usb: dwc3-xilinx: Convert to platform remove callback returning void 2023-05-28 12:36:24 +01:00
ep0.c usb: dwc3: Add error logs for unknown endpoint events 2023-05-13 18:57:30 +09:00
gadget.c USB / Thunderbolt driver updates for 6.5-rc1 2023-07-03 13:23:10 -07:00
gadget.h usb: dwc3: Fix ep0 handling when getting reset while doing control transfer 2022-05-19 18:14:16 +02:00
host.c usb: dwc3: host: remove dead code in dwc3_host_get_irq() 2023-03-29 09:02:25 +02:00
io.h
Kconfig usb: dwc3: fix extcon dependency 2023-01-19 14:19:49 +01:00
Makefile drivers: usb: dwc3: Add AM62 USB wrapper driver 2022-04-21 18:31:56 +02:00
trace.c
trace.h usb: dwc3: change some trace event __dynamic_array() to __get_buf() 2023-03-09 15:35:03 +01:00
ulpi.c