mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-08-24 09:50:04 +00:00
Code Issues Releases Wiki Activity
linux-stable/drivers/net/wireless/mwifiex/sta_event.c
Amitkumar Karwar 38c9d6641f mwifiex: remove cfg_workqueue 
cfg_workqueue was added to notify cfg80211 that scan, connect
or disconnect is done by calling respective completion handlers.
We can avoid use of this workqueue by calling those handlers
from other places.
1) Call connect, disconnect completion handlers in their callback
   functions.
   ex. Call cfg80211_connect_result() in mwifiex_cfg80211_connect()
2) Call scan completion handler after parsing response of last scan
   command in a queue.

After removing the workqueue, variables (assoc_request etc.) and
checks used for mutual exclusion become redundant. Those are also
removed in this patch.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14 14:50:11 -05:00

400 lines
11 KiB
C
Raw Blame History

/*
* Marvell Wireless LAN device driver: station event handling
*
* Copyright (C) 2011, Marvell International Ltd.
*
* This software file (the "File") is distributed by Marvell International
* Ltd. under the terms of the GNU General Public License Version 2, June 1991
* (the "License"). You may use, redistribute and/or modify this File in
* accordance with the terms and conditions of the License, a copy of which
* is available by writing to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
* worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
*
* THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
* IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
* ARE EXPRESSLY DISCLAIMED. The License provides additional details about
* this warranty disclaimer.
*/
#include "decl.h"
#include "ioctl.h"
#include "util.h"
#include "fw.h"
#include "main.h"
#include "wmm.h"
#include "11n.h"
/*
* This function resets the connection state.
*
* The function is invoked after receiving a disconnect event from firmware,
* and performs the following actions -
* - Set media status to disconnected
* - Clean up Tx and Rx packets
* - Resets SNR/NF/RSSI value in driver
* - Resets security configurations in driver
* - Enables auto data rate
* - Saves the previous SSID and BSSID so that they can
* be used for re-association, if required
* - Erases current SSID and BSSID information
* - Sends a disconnect event to upper layers/applications.
*/
void
mwifiex_reset_connect_state(struct mwifiex_private *priv)
{
struct mwifiex_adapter *adapter = priv->adapter;
if (!priv->media_connected)
return;
dev_dbg(adapter->dev, "info: handles disconnect event\n");
priv->media_connected = false;
priv->scan_block = false;
/* Free Tx and Rx packets, report disconnect to upper layer */
mwifiex_clean_txrx(priv);
/* Reset SNR/NF/RSSI values */
priv->data_rssi_last = 0;
priv->data_nf_last = 0;
priv->data_rssi_avg = 0;
priv->data_nf_avg = 0;
priv->bcn_rssi_last = 0;
priv->bcn_nf_last = 0;
priv->bcn_rssi_avg = 0;
priv->bcn_nf_avg = 0;
priv->rxpd_rate = 0;
priv->rxpd_htinfo = 0;
priv->sec_info.wpa_enabled = false;
priv->sec_info.wpa2_enabled = false;
priv->wpa_ie_len = 0;
priv->sec_info.wapi_enabled = false;
priv->wapi_ie_len = 0;
priv->sec_info.wapi_key_on = false;
priv->sec_info.encryption_mode = 0;
/* Enable auto data rate */
priv->is_data_rate_auto = true;
priv->data_rate = 0;
if (priv->bss_mode == NL80211_IFTYPE_ADHOC) {
priv->adhoc_state = ADHOC_IDLE;
priv->adhoc_is_link_sensed = false;
}
/*
* Memorize the previous SSID and BSSID so
* it could be used for re-assoc
*/
dev_dbg(adapter->dev, "info: previous SSID=%s, SSID len=%u\n",
priv->prev_ssid.ssid, priv->prev_ssid.ssid_len);
dev_dbg(adapter->dev, "info: current SSID=%s, SSID len=%u\n",
priv->curr_bss_params.bss_descriptor.ssid.ssid,
priv->curr_bss_params.bss_descriptor.ssid.ssid_len);
memcpy(&priv->prev_ssid,
&priv->curr_bss_params.bss_descriptor.ssid,
sizeof(struct mwifiex_802_11_ssid));
memcpy(priv->prev_bssid,
priv->curr_bss_params.bss_descriptor.mac_address, ETH_ALEN);
/* Need to erase the current SSID and BSSID info */
memset(&priv->curr_bss_params, 0x00, sizeof(priv->curr_bss_params));
adapter->tx_lock_flag = false;
adapter->pps_uapsd_mode = false;
if (adapter->num_cmd_timeout && adapter->curr_cmd)
return;
priv->media_connected = false;
dev_dbg(adapter->dev, "info: successfully disconnected from"
" %pM: reason code %d\n", priv->cfg_bssid,
WLAN_REASON_DEAUTH_LEAVING);
if (priv->bss_mode == NL80211_IFTYPE_STATION) {
cfg80211_disconnected(priv->netdev, WLAN_REASON_DEAUTH_LEAVING,
NULL, 0, GFP_KERNEL);
}
memset(priv->cfg_bssid, 0, ETH_ALEN);
if (!netif_queue_stopped(priv->netdev))
mwifiex_stop_net_dev_queue(priv->netdev, adapter);
if (netif_carrier_ok(priv->netdev))
netif_carrier_off(priv->netdev);
/* Reset wireless stats signal info */
priv->qual_level = 0;
priv->qual_noise = 0;
}
/*
* This function handles events generated by firmware.
*
* This is a generic function and handles all events.
*
* Event specific routines are called by this function based
* upon the generated event cause.
*
* For the following events, the function just forwards them to upper
* layers, optionally recording the change -
* - EVENT_LINK_SENSED
* - EVENT_MIC_ERR_UNICAST
* - EVENT_MIC_ERR_MULTICAST
* - EVENT_PORT_RELEASE
* - EVENT_RSSI_LOW
* - EVENT_SNR_LOW
* - EVENT_MAX_FAIL
* - EVENT_RSSI_HIGH
* - EVENT_SNR_HIGH
* - EVENT_DATA_RSSI_LOW
* - EVENT_DATA_SNR_LOW
* - EVENT_DATA_RSSI_HIGH
* - EVENT_DATA_SNR_HIGH
* - EVENT_LINK_QUALITY
* - EVENT_PRE_BEACON_LOST
* - EVENT_IBSS_COALESCED
* - EVENT_WEP_ICV_ERR
* - EVENT_BW_CHANGE
* - EVENT_HOSTWAKE_STAIE
*
* For the following events, no action is taken -
* - EVENT_MIB_CHANGED
* - EVENT_INIT_DONE
* - EVENT_DUMMY_HOST_WAKEUP_SIGNAL
*
* Rest of the supported events requires driver handling -
* - EVENT_DEAUTHENTICATED
* - EVENT_DISASSOCIATED
* - EVENT_LINK_LOST
* - EVENT_PS_SLEEP
* - EVENT_PS_AWAKE
* - EVENT_DEEP_SLEEP_AWAKE
* - EVENT_HS_ACT_REQ
* - EVENT_ADHOC_BCN_LOST
* - EVENT_BG_SCAN_REPORT
* - EVENT_WMM_STATUS_CHANGE
* - EVENT_ADDBA
* - EVENT_DELBA
* - EVENT_BA_STREAM_TIEMOUT
* - EVENT_AMSDU_AGGR_CTRL
*/
int mwifiex_process_sta_event(struct mwifiex_private *priv)
{
struct mwifiex_adapter *adapter = priv->adapter;
int ret = 0;
u32 eventcause = adapter->event_cause;
switch (eventcause) {
case EVENT_DUMMY_HOST_WAKEUP_SIGNAL:
dev_err(adapter->dev, "invalid EVENT: DUMMY_HOST_WAKEUP_SIGNAL,"
" ignoring it\n");
break;
case EVENT_LINK_SENSED:
dev_dbg(adapter->dev, "event: LINK_SENSED\n");
if (!netif_carrier_ok(priv->netdev))
netif_carrier_on(priv->netdev);
if (netif_queue_stopped(priv->netdev))
mwifiex_wake_up_net_dev_queue(priv->netdev, adapter);
break;
case EVENT_DEAUTHENTICATED:
dev_dbg(adapter->dev, "event: Deauthenticated\n");
adapter->dbg.num_event_deauth++;
if (priv->media_connected)
mwifiex_reset_connect_state(priv);
break;
case EVENT_DISASSOCIATED:
dev_dbg(adapter->dev, "event: Disassociated\n");
adapter->dbg.num_event_disassoc++;
if (priv->media_connected)
mwifiex_reset_connect_state(priv);
break;
case EVENT_LINK_LOST:
dev_dbg(adapter->dev, "event: Link lost\n");
adapter->dbg.num_event_link_lost++;
if (priv->media_connected)
mwifiex_reset_connect_state(priv);
break;
case EVENT_PS_SLEEP:
dev_dbg(adapter->dev, "info: EVENT: SLEEP\n");
adapter->ps_state = PS_STATE_PRE_SLEEP;
mwifiex_check_ps_cond(adapter);
break;
case EVENT_PS_AWAKE:
dev_dbg(adapter->dev, "info: EVENT: AWAKE\n");
if (!adapter->pps_uapsd_mode &&
priv->media_connected &&
adapter->sleep_period.period) {
adapter->pps_uapsd_mode = true;
dev_dbg(adapter->dev,
"event: PPS/UAPSD mode activated\n");
}
adapter->tx_lock_flag = false;
if (adapter->pps_uapsd_mode && adapter->gen_null_pkt) {
if (mwifiex_check_last_packet_indication(priv)) {
if (!adapter->data_sent) {
if (!mwifiex_send_null_packet(priv,
MWIFIEX_TxPD_POWER_MGMT_NULL_PACKET
|
MWIFIEX_TxPD_POWER_MGMT_LAST_PACKET))
adapter->ps_state =
PS_STATE_SLEEP;
return 0;
}
}
}
adapter->ps_state = PS_STATE_AWAKE;
adapter->pm_wakeup_card_req = false;
adapter->pm_wakeup_fw_try = false;
break;
case EVENT_DEEP_SLEEP_AWAKE:
adapter->if_ops.wakeup_complete(adapter);
dev_dbg(adapter->dev, "event: DS_AWAKE\n");
if (adapter->is_deep_sleep)
adapter->is_deep_sleep = false;
break;
case EVENT_HS_ACT_REQ:
dev_dbg(adapter->dev, "event: HS_ACT_REQ\n");
ret = mwifiex_send_cmd_async(priv,
HostCmd_CMD_802_11_HS_CFG_ENH,
0, 0, NULL);
break;
case EVENT_MIC_ERR_UNICAST:
dev_dbg(adapter->dev, "event: UNICAST MIC ERROR\n");
break;
case EVENT_MIC_ERR_MULTICAST:
dev_dbg(adapter->dev, "event: MULTICAST MIC ERROR\n");
break;
case EVENT_MIB_CHANGED:
case EVENT_INIT_DONE:
break;
case EVENT_ADHOC_BCN_LOST:
dev_dbg(adapter->dev, "event: ADHOC_BCN_LOST\n");
priv->adhoc_is_link_sensed = false;
mwifiex_clean_txrx(priv);
if (!netif_queue_stopped(priv->netdev))
mwifiex_stop_net_dev_queue(priv->netdev, adapter);
if (netif_carrier_ok(priv->netdev))
netif_carrier_off(priv->netdev);
break;
case EVENT_BG_SCAN_REPORT:
dev_dbg(adapter->dev, "event: BGS_REPORT\n");
ret = mwifiex_send_cmd_async(priv,
HostCmd_CMD_802_11_BG_SCAN_QUERY,
HostCmd_ACT_GEN_GET, 0, NULL);
break;
case EVENT_PORT_RELEASE:
dev_dbg(adapter->dev, "event: PORT RELEASE\n");
break;
case EVENT_WMM_STATUS_CHANGE:
dev_dbg(adapter->dev, "event: WMM status changed\n");
ret = mwifiex_send_cmd_async(priv, HostCmd_CMD_WMM_GET_STATUS,
0, 0, NULL);
break;
case EVENT_RSSI_LOW:
dev_dbg(adapter->dev, "event: Beacon RSSI_LOW\n");
break;
case EVENT_SNR_LOW:
dev_dbg(adapter->dev, "event: Beacon SNR_LOW\n");
break;
case EVENT_MAX_FAIL:
dev_dbg(adapter->dev, "event: MAX_FAIL\n");
break;
case EVENT_RSSI_HIGH:
dev_dbg(adapter->dev, "event: Beacon RSSI_HIGH\n");
break;
case EVENT_SNR_HIGH:
dev_dbg(adapter->dev, "event: Beacon SNR_HIGH\n");
break;
case EVENT_DATA_RSSI_LOW:
dev_dbg(adapter->dev, "event: Data RSSI_LOW\n");
break;
case EVENT_DATA_SNR_LOW:
dev_dbg(adapter->dev, "event: Data SNR_LOW\n");
break;
case EVENT_DATA_RSSI_HIGH:
dev_dbg(adapter->dev, "event: Data RSSI_HIGH\n");
break;
case EVENT_DATA_SNR_HIGH:
dev_dbg(adapter->dev, "event: Data SNR_HIGH\n");
break;
case EVENT_LINK_QUALITY:
dev_dbg(adapter->dev, "event: Link Quality\n");
break;
case EVENT_PRE_BEACON_LOST:
dev_dbg(adapter->dev, "event: Pre-Beacon Lost\n");
break;
case EVENT_IBSS_COALESCED:
dev_dbg(adapter->dev, "event: IBSS_COALESCED\n");
ret = mwifiex_send_cmd_async(priv,
HostCmd_CMD_802_11_IBSS_COALESCING_STATUS,
HostCmd_ACT_GEN_GET, 0, NULL);
break;
case EVENT_ADDBA:
dev_dbg(adapter->dev, "event: ADDBA Request\n");
mwifiex_send_cmd_async(priv, HostCmd_CMD_11N_ADDBA_RSP,
HostCmd_ACT_GEN_SET, 0,
adapter->event_body);
break;
case EVENT_DELBA:
dev_dbg(adapter->dev, "event: DELBA Request\n");
mwifiex_11n_delete_ba_stream(priv, adapter->event_body);
break;
case EVENT_BA_STREAM_TIEMOUT:
dev_dbg(adapter->dev, "event: BA Stream timeout\n");
mwifiex_11n_ba_stream_timeout(priv,
(struct host_cmd_ds_11n_batimeout
*)
adapter->event_body);
break;
case EVENT_AMSDU_AGGR_CTRL:
dev_dbg(adapter->dev, "event: AMSDU_AGGR_CTRL %d\n",
*(u16 *) adapter->event_body);
adapter->tx_buf_size =
min(adapter->curr_tx_buf_size,
le16_to_cpu(*(__le16 *) adapter->event_body));
dev_dbg(adapter->dev, "event: tx_buf_size %d\n",
adapter->tx_buf_size);
break;
case EVENT_WEP_ICV_ERR:
dev_dbg(adapter->dev, "event: WEP ICV error\n");
break;
case EVENT_BW_CHANGE:
dev_dbg(adapter->dev, "event: BW Change\n");
break;
case EVENT_HOSTWAKE_STAIE:
dev_dbg(adapter->dev, "event: HOSTWAKE_STAIE %d\n", eventcause);
break;
default:
dev_dbg(adapter->dev, "event: unknown event id: %#x\n",
eventcause);
break;
}
return ret;
}
Reference in a new issue View git blame Copy permalink