linux-stable/drivers/thermal
Linus Torvalds 5d26c176d5 - Use the newly introduced 'hot' and 'critical' ops for the acpi
thermal driver (Daniel Lezcano)
 
 - Remove the notify ops as it is no longer used (Daniel Lezcano)
 
 - Remove the 'forced passive' option and the unused bind/unbind
   functions (Daniel Lezcano)
 
 - Remove the THERMAL_TRIPS_NONE and the code cleanup around this
   macro (Daniel Lezcano)
 
 - Rework the delays to make them pre-computed instead of computing
   them again and again at each polling interval (Daniel Lezcano)
 
 - Remove the pointless 'thermal_zone_device_reset' function (Daniel
   Lezcano)
 
 - Use the critical and hot ops to prevent an unexpected system
   shutdown on int340x (Kai-Heng Feng)
 
 - Make the cooling device state private to the thermal subsystem
   (Daniel Lezcano)
 
 - Prevent to use not-power-aware actor devices with the power
   allocator governor (Lukasz Luba)
 
 - Remove 'zx' and 'tango' support along with the corresponding
   platforms (Arnd Bergman)
 
 - Fix several issues on the Omap thermal driver (Tony Lindgren)
 
 - Add support for adc-tm5 PMIC thermal monitor for Qcom
   platforms. Please note those changes rely on an immutable branch:
   iio-thermal-5.11-rc1/ib-iio-thermal-5.11-rc1 from the iio tree
   (Dmitry Baryshkov)
 
 - Fix an initialization loop in the adc-tm5 (Colin Ian King)
 
 - Fix a return error check in the cpufreq cooling device (Viresh Kumar)
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmAvkKMACgkQqDIjiipP
 6E9yFggAmXy8t2j1mRvn/KLU+teTGIoSFkZ8mBnY2Sgip97IRZRhCwAZbUKOW0eI
 bvpAzBjacxdZHT7OxxvGzCOq/zlAh4UoStI8bMpzdUWPdkAj4ippArLYGvagLym8
 WEQysWnrr8V1RCZbQuBNjyLwjf0fcXkzIBU1mbZXA8T8Y6Yn646TdtsrVT4Idg1j
 MOg7PAHBcTSY/wOReZKJ5TB1yvo2tNOuGOqUVbrIAHlRkiNTVHirVUq6aZGtTTKp
 7ukcu8EI/o7XKBdQ5d9MZaHdwkcyAIJj4jdjmjkUJpa8VYQFPjayNyN3I+Py9lH2
 jtWVYHQxZbY166IZP2yeXFjPzd6elw==
 =Jmz4
 -----END PGP SIGNATURE-----

Merge tag 'thermal-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux

Pull thermal updates from Daniel Lezcano:

 - Use the newly introduced 'hot' and 'critical' ops for the acpi
   thermal driver (Daniel Lezcano)

 - Remove the notify ops as it is no longer used (Daniel Lezcano)

 - Remove the 'forced passive' option and the unused bind/unbind
   functions (Daniel Lezcano)

 - Remove the THERMAL_TRIPS_NONE and the code cleanup around this macro
   (Daniel Lezcano)

 - Rework the delays to make them pre-computed instead of computing them
   again and again at each polling interval (Daniel Lezcano)

 - Remove the pointless 'thermal_zone_device_reset' function (Daniel
   Lezcano)

 - Use the critical and hot ops to prevent an unexpected system shutdown
   on int340x (Kai-Heng Feng)

 - Make the cooling device state private to the thermal subsystem
   (Daniel Lezcano)

 - Prevent to use not-power-aware actor devices with the power allocator
   governor (Lukasz Luba)

 - Remove 'zx' and 'tango' support along with the corresponding
   platforms (Arnd Bergman)

 - Fix several issues on the Omap thermal driver (Tony Lindgren)

 - Add support for adc-tm5 PMIC thermal monitor for Qcom platforms
   (Dmitry Baryshkov)

 - Fix an initialization loop in the adc-tm5 (Colin Ian King)

 - Fix a return error check in the cpufreq cooling device (Viresh Kumar)

* tag 'thermal-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (26 commits)
  thermal: cpufreq_cooling: freq_qos_update_request() returns < 0 on error
  thermal: qcom: Fix comparison with uninitialized variable channels_available
  thermal: qcom: add support for adc-tm5 PMIC thermal monitor
  dt-bindings: thermal: qcom: add adc-thermal monitor bindings
  thermal: ti-soc-thermal: Use non-inverted define for omap4
  thermal: ti-soc-thermal: Simplify polling with iopoll
  thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430
  thermal: ti-soc-thermal: Skip pointless register access for dra7
  thermal/drivers/zx: Remove zx driver
  thermal/drivers/tango: Remove tango driver
  thermal: power allocator: fail binding for non-power actor devices
  thermal/core: Make cooling device state change private
  thermal: intel: pch: Fix unexpected shutdown at critical temperature
  thermal: int340x: Fix unexpected shutdown at critical temperature
  thermal/core: Remove pointless thermal_zone_device_reset() function
  thermal/core: Remove ms based delay fields
  thermal/core: Use precomputed jiffies for the polling
  thermal/core: Precompute the delays from msecs to jiffies
  thermal/core: Remove unused macro THERMAL_TRIPS_NONE
  thermal/core: Remove THERMAL_TRIPS_NONE test
  ...
2021-02-22 09:39:11 -08:00
..
broadcom thermal: broadcom: simplify the return expression of bcm2711_thermal_probe() 2020-12-10 18:29:43 +01:00
intel - Use the newly introduced 'hot' and 'critical' ops for the acpi 2021-02-22 09:39:11 -08:00
qcom thermal: qcom: Fix comparison with uninitialized variable channels_available 2021-02-16 19:05:23 +01:00
samsung thermal: exynos: Silence warning during deferred probe 2020-03-12 11:56:53 +01:00
st thermal: stm32: simplify the return expression of stm_thermal_prepare() 2020-10-12 12:08:35 +02:00
tegra
ti-soc-thermal thermal: ti-soc-thermal: Use non-inverted define for omap4 2021-02-15 21:19:32 +01:00
amlogic_thermal.c thermal: amlogic: Add hwmon support 2020-11-16 10:30:53 +01:00
armada_thermal.c thermal: Explicitly enable non-changing thermal zone devices 2020-06-29 20:26:37 +02:00
cpufreq_cooling.c - Use the newly introduced 'hot' and 'critical' ops for the acpi 2021-02-22 09:39:11 -08:00
cpuidle_cooling.c thermal/idle_inject: Fix comment of idle_duration_us and name of latency_ns 2020-10-12 12:08:35 +02:00
da9062-thermal.c thermal/core: Remove ms based delay fields 2021-01-19 22:23:49 +01:00
db8500_thermal.c
devfreq_cooling.c thermal/drivers/devfreq_cooling: Fix the build when !ENERGY_MODEL 2020-12-15 17:03:56 +01:00
dove_thermal.c thermal: Explicitly enable non-changing thermal zone devices 2020-06-29 20:26:37 +02:00
gov_bang_bang.c
gov_fair_share.c thermal/governors: Prefix all source files with gov_ 2020-05-22 18:48:54 +02:00
gov_power_allocator.c thermal: power allocator: fail binding for non-power actor devices 2021-01-19 22:31:10 +01:00
gov_step_wise.c thermal/core: Remove the 'forced_passive' option 2021-01-19 22:22:45 +01:00
gov_user_space.c thermal/governors: Prefix all source files with gov_ 2020-05-22 18:48:54 +02:00
hisi_thermal.c thermal: Use mode helpers in drivers 2020-06-29 20:26:36 +02:00
imx8mm_thermal.c thermal: imx8mm: Disable the clock on probe failure 2020-12-04 20:46:03 +01:00
imx_sc_thermal.c - Add the hwmon support on the i.MX SC (Anson Huang) 2020-06-12 14:10:21 -07:00
imx_thermal.c thermal: imx: Use dev_err_probe() to simplify error handling 2020-10-12 12:08:34 +02:00
k3_bandgap.c thermal: k3: Add support for bandgap sensors 2020-04-14 11:41:12 +02:00
Kconfig thermal/drivers/zx: Remove zx driver 2021-02-03 09:17:47 +01:00
khadas_mcu_fan.c thermal/core: Make cooling device state change private 2021-01-19 22:31:10 +01:00
kirkwood_thermal.c thermal: Explicitly enable non-changing thermal zone devices 2020-06-29 20:26:37 +02:00
Makefile thermal/drivers/zx: Remove zx driver 2021-02-03 09:17:47 +01:00
max77620_thermal.c
mtk_thermal.c thermal: mtk_thermal: make device_reset optional 2020-10-27 11:19:18 +01:00
qoriq_thermal.c thermal: qoriq: Update the settings for TMUv2 2020-05-29 20:26:51 +02:00
rcar_gen3_thermal.c thermal: rcar_gen3_thermal: Add r8a779a0 support 2020-12-08 21:18:01 +01:00
rcar_thermal.c thermal/drivers/rcar: Remove notification usage 2020-12-15 17:01:55 +01:00
rockchip_thermal.c thermal: Use mode helpers in drivers 2020-06-29 20:26:36 +02:00
spear_thermal.c thermal: Explicitly enable non-changing thermal zone devices 2020-06-29 20:26:37 +02:00
sprd_thermal.c - Add support to enable/disable the thermal zones resulting on core code and 2020-08-06 18:10:55 -07:00
sun8i_thermal.c thermal: sun8i: Use bitmap API instead of open code 2020-11-12 11:05:12 +01:00
thermal-generic-adc.c
thermal_core.c thermal/core: Remove pointless thermal_zone_device_reset() function 2021-01-19 22:23:49 +01:00
thermal_core.h thermal/core: Make cooling device state change private 2021-01-19 22:31:10 +01:00
thermal_helpers.c thermal/core: Precompute the delays from msecs to jiffies 2021-01-19 22:23:38 +01:00
thermal_hwmon.c thermal/drivers/hwmon: Cleanup coding style a bit 2020-11-12 11:24:01 +01:00
thermal_hwmon.h
thermal_mmio.c
thermal_netlink.c - Fix Kconfig typo "acces" -> "access" (Colin Ian King) 2020-10-17 10:40:22 -07:00
thermal_netlink.h thermal: netlink: Improve the initcall ordering 2020-07-21 10:40:08 +02:00
thermal_of.c thermal: Simplify or eliminate unnecessary set_mode() methods 2020-06-29 20:26:39 +02:00
thermal_sysfs.c thermal/core: Remove pointless test with the THERMAL_TRIPS_NONE macro 2021-01-19 22:23:11 +01:00
uniphier_thermal.c