mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-28 11:49:32 +00:00
![Sachin Kamat](/assets/img/avatar_default.png)
kzalloc prints its own OOM message upon failure. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
902 lines
24 KiB
C
902 lines
24 KiB
C
/*
|
|
* Texas Instruments SoC Adaptive Body Bias(ABB) Regulator
|
|
*
|
|
* Copyright (C) 2011 Texas Instruments, Inc.
|
|
* Mike Turquette <mturquette@ti.com>
|
|
*
|
|
* Copyright (C) 2012-2013 Texas Instruments, Inc.
|
|
* Andrii Tseglytskyi <andrii.tseglytskyi@ti.com>
|
|
* Nishanth Menon <nm@ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
|
* kind, whether express or implied; without even the implied warranty
|
|
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
|
|
/*
|
|
* ABB LDO operating states:
|
|
* NOMINAL_OPP: bypasses the ABB LDO
|
|
* FAST_OPP: sets ABB LDO to Forward Body-Bias
|
|
* SLOW_OPP: sets ABB LDO to Reverse Body-Bias
|
|
*/
|
|
#define TI_ABB_NOMINAL_OPP 0
|
|
#define TI_ABB_FAST_OPP 1
|
|
#define TI_ABB_SLOW_OPP 3
|
|
|
|
/**
|
|
* struct ti_abb_info - ABB information per voltage setting
|
|
* @opp_sel: one of TI_ABB macro
|
|
* @vset: (optional) vset value that LDOVBB needs to be overriden with.
|
|
*
|
|
* Array of per voltage entries organized in the same order as regulator_desc's
|
|
* volt_table list. (selector is used to index from this array)
|
|
*/
|
|
struct ti_abb_info {
|
|
u32 opp_sel;
|
|
u32 vset;
|
|
};
|
|
|
|
/**
|
|
* struct ti_abb_reg - Register description for ABB block
|
|
* @setup_off: setup register offset from base
|
|
* @control_off: control register offset from base
|
|
* @sr2_wtcnt_value_mask: setup register- sr2_wtcnt_value mask
|
|
* @fbb_sel_mask: setup register- FBB sel mask
|
|
* @rbb_sel_mask: setup register- RBB sel mask
|
|
* @sr2_en_mask: setup register- enable mask
|
|
* @opp_change_mask: control register - mask to trigger LDOVBB change
|
|
* @opp_sel_mask: control register - mask for mode to operate
|
|
*/
|
|
struct ti_abb_reg {
|
|
u32 setup_off;
|
|
u32 control_off;
|
|
|
|
/* Setup register fields */
|
|
u32 sr2_wtcnt_value_mask;
|
|
u32 fbb_sel_mask;
|
|
u32 rbb_sel_mask;
|
|
u32 sr2_en_mask;
|
|
|
|
/* Control register fields */
|
|
u32 opp_change_mask;
|
|
u32 opp_sel_mask;
|
|
};
|
|
|
|
/**
|
|
* struct ti_abb - ABB instance data
|
|
* @rdesc: regulator descriptor
|
|
* @clk: clock(usually sysclk) supplying ABB block
|
|
* @base: base address of ABB block
|
|
* @setup_reg: setup register of ABB block
|
|
* @control_reg: control register of ABB block
|
|
* @int_base: interrupt register base address
|
|
* @efuse_base: (optional) efuse base address for ABB modes
|
|
* @ldo_base: (optional) LDOVBB vset override base address
|
|
* @regs: pointer to struct ti_abb_reg for ABB block
|
|
* @txdone_mask: mask on int_base for tranxdone interrupt
|
|
* @ldovbb_override_mask: mask to ldo_base for overriding default LDO VBB
|
|
* vset with value from efuse
|
|
* @ldovbb_vset_mask: mask to ldo_base for providing the VSET override
|
|
* @info: array to per voltage ABB configuration
|
|
* @current_info_idx: current index to info
|
|
* @settling_time: SoC specific settling time for LDO VBB
|
|
*/
|
|
struct ti_abb {
|
|
struct regulator_desc rdesc;
|
|
struct clk *clk;
|
|
void __iomem *base;
|
|
void __iomem *setup_reg;
|
|
void __iomem *control_reg;
|
|
void __iomem *int_base;
|
|
void __iomem *efuse_base;
|
|
void __iomem *ldo_base;
|
|
|
|
const struct ti_abb_reg *regs;
|
|
u32 txdone_mask;
|
|
u32 ldovbb_override_mask;
|
|
u32 ldovbb_vset_mask;
|
|
|
|
struct ti_abb_info *info;
|
|
int current_info_idx;
|
|
|
|
u32 settling_time;
|
|
};
|
|
|
|
/**
|
|
* ti_abb_rmw() - handy wrapper to set specific register bits
|
|
* @mask: mask for register field
|
|
* @value: value shifted to mask location and written
|
|
* @reg: register address
|
|
*
|
|
* Return: final register value (may be unused)
|
|
*/
|
|
static inline u32 ti_abb_rmw(u32 mask, u32 value, void __iomem *reg)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl(reg);
|
|
val &= ~mask;
|
|
val |= (value << __ffs(mask)) & mask;
|
|
writel(val, reg);
|
|
|
|
return val;
|
|
}
|
|
|
|
/**
|
|
* ti_abb_check_txdone() - handy wrapper to check ABB tranxdone status
|
|
* @abb: pointer to the abb instance
|
|
*
|
|
* Return: true or false
|
|
*/
|
|
static inline bool ti_abb_check_txdone(const struct ti_abb *abb)
|
|
{
|
|
return !!(readl(abb->int_base) & abb->txdone_mask);
|
|
}
|
|
|
|
/**
|
|
* ti_abb_clear_txdone() - handy wrapper to clear ABB tranxdone status
|
|
* @abb: pointer to the abb instance
|
|
*/
|
|
static inline void ti_abb_clear_txdone(const struct ti_abb *abb)
|
|
{
|
|
writel(abb->txdone_mask, abb->int_base);
|
|
};
|
|
|
|
/**
|
|
* ti_abb_wait_tranx() - waits for ABB tranxdone event
|
|
* @dev: device
|
|
* @abb: pointer to the abb instance
|
|
*
|
|
* Return: 0 on success or -ETIMEDOUT if the event is not cleared on time.
|
|
*/
|
|
static int ti_abb_wait_txdone(struct device *dev, struct ti_abb *abb)
|
|
{
|
|
int timeout = 0;
|
|
bool status;
|
|
|
|
while (timeout++ <= abb->settling_time) {
|
|
status = ti_abb_check_txdone(abb);
|
|
if (status)
|
|
break;
|
|
|
|
udelay(1);
|
|
}
|
|
|
|
if (timeout > abb->settling_time) {
|
|
dev_warn_ratelimited(dev,
|
|
"%s:TRANXDONE timeout(%duS) int=0x%08x\n",
|
|
__func__, timeout, readl(abb->int_base));
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ti_abb_clear_all_txdone() - clears ABB tranxdone event
|
|
* @dev: device
|
|
* @abb: pointer to the abb instance
|
|
*
|
|
* Return: 0 on success or -ETIMEDOUT if the event is not cleared on time.
|
|
*/
|
|
static int ti_abb_clear_all_txdone(struct device *dev, const struct ti_abb *abb)
|
|
{
|
|
int timeout = 0;
|
|
bool status;
|
|
|
|
while (timeout++ <= abb->settling_time) {
|
|
ti_abb_clear_txdone(abb);
|
|
|
|
status = ti_abb_check_txdone(abb);
|
|
if (!status)
|
|
break;
|
|
|
|
udelay(1);
|
|
}
|
|
|
|
if (timeout > abb->settling_time) {
|
|
dev_warn_ratelimited(dev,
|
|
"%s:TRANXDONE timeout(%duS) int=0x%08x\n",
|
|
__func__, timeout, readl(abb->int_base));
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ti_abb_program_ldovbb() - program LDOVBB register for override value
|
|
* @dev: device
|
|
* @abb: pointer to the abb instance
|
|
* @info: ABB info to program
|
|
*/
|
|
static void ti_abb_program_ldovbb(struct device *dev, const struct ti_abb *abb,
|
|
struct ti_abb_info *info)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl(abb->ldo_base);
|
|
/* clear up previous values */
|
|
val &= ~(abb->ldovbb_override_mask | abb->ldovbb_vset_mask);
|
|
|
|
switch (info->opp_sel) {
|
|
case TI_ABB_SLOW_OPP:
|
|
case TI_ABB_FAST_OPP:
|
|
val |= abb->ldovbb_override_mask;
|
|
val |= info->vset << __ffs(abb->ldovbb_vset_mask);
|
|
break;
|
|
}
|
|
|
|
writel(val, abb->ldo_base);
|
|
}
|
|
|
|
/**
|
|
* ti_abb_set_opp() - Setup ABB and LDO VBB for required bias
|
|
* @rdev: regulator device
|
|
* @abb: pointer to the abb instance
|
|
* @info: ABB info to program
|
|
*
|
|
* Return: 0 on success or appropriate error value when fails
|
|
*/
|
|
static int ti_abb_set_opp(struct regulator_dev *rdev, struct ti_abb *abb,
|
|
struct ti_abb_info *info)
|
|
{
|
|
const struct ti_abb_reg *regs = abb->regs;
|
|
struct device *dev = &rdev->dev;
|
|
int ret;
|
|
|
|
ret = ti_abb_clear_all_txdone(dev, abb);
|
|
if (ret)
|
|
goto out;
|
|
|
|
ti_abb_rmw(regs->fbb_sel_mask | regs->rbb_sel_mask, 0, abb->setup_reg);
|
|
|
|
switch (info->opp_sel) {
|
|
case TI_ABB_SLOW_OPP:
|
|
ti_abb_rmw(regs->rbb_sel_mask, 1, abb->setup_reg);
|
|
break;
|
|
case TI_ABB_FAST_OPP:
|
|
ti_abb_rmw(regs->fbb_sel_mask, 1, abb->setup_reg);
|
|
break;
|
|
}
|
|
|
|
/* program next state of ABB ldo */
|
|
ti_abb_rmw(regs->opp_sel_mask, info->opp_sel, abb->control_reg);
|
|
|
|
/*
|
|
* program LDO VBB vset override if needed for !bypass mode
|
|
* XXX: Do not switch sequence - for !bypass, LDO override reset *must*
|
|
* be performed *before* switch to bias mode else VBB glitches.
|
|
*/
|
|
if (abb->ldo_base && info->opp_sel != TI_ABB_NOMINAL_OPP)
|
|
ti_abb_program_ldovbb(dev, abb, info);
|
|
|
|
/* Initiate ABB ldo change */
|
|
ti_abb_rmw(regs->opp_change_mask, 1, abb->control_reg);
|
|
|
|
/* Wait for ABB LDO to complete transition to new Bias setting */
|
|
ret = ti_abb_wait_txdone(dev, abb);
|
|
if (ret)
|
|
goto out;
|
|
|
|
ret = ti_abb_clear_all_txdone(dev, abb);
|
|
if (ret)
|
|
goto out;
|
|
|
|
/*
|
|
* Reset LDO VBB vset override bypass mode
|
|
* XXX: Do not switch sequence - for bypass, LDO override reset *must*
|
|
* be performed *after* switch to bypass else VBB glitches.
|
|
*/
|
|
if (abb->ldo_base && info->opp_sel == TI_ABB_NOMINAL_OPP)
|
|
ti_abb_program_ldovbb(dev, abb, info);
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* ti_abb_set_voltage_sel() - regulator accessor function to set ABB LDO
|
|
* @rdev: regulator device
|
|
* @sel: selector to index into required ABB LDO settings (maps to
|
|
* regulator descriptor's volt_table)
|
|
*
|
|
* Return: 0 on success or appropriate error value when fails
|
|
*/
|
|
static int ti_abb_set_voltage_sel(struct regulator_dev *rdev, unsigned sel)
|
|
{
|
|
const struct regulator_desc *desc = rdev->desc;
|
|
struct ti_abb *abb = rdev_get_drvdata(rdev);
|
|
struct device *dev = &rdev->dev;
|
|
struct ti_abb_info *info, *oinfo;
|
|
int ret = 0;
|
|
|
|
if (!abb) {
|
|
dev_err_ratelimited(dev, "%s: No regulator drvdata\n",
|
|
__func__);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (!desc->n_voltages || !abb->info) {
|
|
dev_err_ratelimited(dev,
|
|
"%s: No valid voltage table entries?\n",
|
|
__func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (sel >= desc->n_voltages) {
|
|
dev_err(dev, "%s: sel idx(%d) >= n_voltages(%d)\n", __func__,
|
|
sel, desc->n_voltages);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* If we are in the same index as we were, nothing to do here! */
|
|
if (sel == abb->current_info_idx) {
|
|
dev_dbg(dev, "%s: Already at sel=%d\n", __func__, sel);
|
|
return ret;
|
|
}
|
|
|
|
/* If data is exactly the same, then just update index, no change */
|
|
info = &abb->info[sel];
|
|
oinfo = &abb->info[abb->current_info_idx];
|
|
if (!memcmp(info, oinfo, sizeof(*info))) {
|
|
dev_dbg(dev, "%s: Same data new idx=%d, old idx=%d\n", __func__,
|
|
sel, abb->current_info_idx);
|
|
goto out;
|
|
}
|
|
|
|
ret = ti_abb_set_opp(rdev, abb, info);
|
|
|
|
out:
|
|
if (!ret)
|
|
abb->current_info_idx = sel;
|
|
else
|
|
dev_err_ratelimited(dev,
|
|
"%s: Volt[%d] idx[%d] mode[%d] Fail(%d)\n",
|
|
__func__, desc->volt_table[sel], sel,
|
|
info->opp_sel, ret);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* ti_abb_get_voltage_sel() - Regulator accessor to get current ABB LDO setting
|
|
* @rdev: regulator device
|
|
*
|
|
* Return: 0 on success or appropriate error value when fails
|
|
*/
|
|
static int ti_abb_get_voltage_sel(struct regulator_dev *rdev)
|
|
{
|
|
const struct regulator_desc *desc = rdev->desc;
|
|
struct ti_abb *abb = rdev_get_drvdata(rdev);
|
|
struct device *dev = &rdev->dev;
|
|
|
|
if (!abb) {
|
|
dev_err_ratelimited(dev, "%s: No regulator drvdata\n",
|
|
__func__);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (!desc->n_voltages || !abb->info) {
|
|
dev_err_ratelimited(dev,
|
|
"%s: No valid voltage table entries?\n",
|
|
__func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (abb->current_info_idx >= (int)desc->n_voltages) {
|
|
dev_err(dev, "%s: Corrupted data? idx(%d) >= n_voltages(%d)\n",
|
|
__func__, abb->current_info_idx, desc->n_voltages);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return abb->current_info_idx;
|
|
}
|
|
|
|
/**
|
|
* ti_abb_init_timings() - setup ABB clock timing for the current platform
|
|
* @dev: device
|
|
* @abb: pointer to the abb instance
|
|
*
|
|
* Return: 0 if timing is updated, else returns error result.
|
|
*/
|
|
static int ti_abb_init_timings(struct device *dev, struct ti_abb *abb)
|
|
{
|
|
u32 clock_cycles;
|
|
u32 clk_rate, sr2_wt_cnt_val, cycle_rate;
|
|
const struct ti_abb_reg *regs = abb->regs;
|
|
int ret;
|
|
char *pname = "ti,settling-time";
|
|
|
|
/* read device tree properties */
|
|
ret = of_property_read_u32(dev->of_node, pname, &abb->settling_time);
|
|
if (ret) {
|
|
dev_err(dev, "Unable to get property '%s'(%d)\n", pname, ret);
|
|
return ret;
|
|
}
|
|
|
|
/* ABB LDO cannot be settle in 0 time */
|
|
if (!abb->settling_time) {
|
|
dev_err(dev, "Invalid property:'%s' set as 0!\n", pname);
|
|
return -EINVAL;
|
|
}
|
|
|
|
pname = "ti,clock-cycles";
|
|
ret = of_property_read_u32(dev->of_node, pname, &clock_cycles);
|
|
if (ret) {
|
|
dev_err(dev, "Unable to get property '%s'(%d)\n", pname, ret);
|
|
return ret;
|
|
}
|
|
/* ABB LDO cannot be settle in 0 clock cycles */
|
|
if (!clock_cycles) {
|
|
dev_err(dev, "Invalid property:'%s' set as 0!\n", pname);
|
|
return -EINVAL;
|
|
}
|
|
|
|
abb->clk = devm_clk_get(dev, NULL);
|
|
if (IS_ERR(abb->clk)) {
|
|
ret = PTR_ERR(abb->clk);
|
|
dev_err(dev, "%s: Unable to get clk(%d)\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* SR2_WTCNT_VALUE is the settling time for the ABB ldo after a
|
|
* transition and must be programmed with the correct time at boot.
|
|
* The value programmed into the register is the number of SYS_CLK
|
|
* clock cycles that match a given wall time profiled for the ldo.
|
|
* This value depends on:
|
|
* settling time of ldo in micro-seconds (varies per OMAP family)
|
|
* # of clock cycles per SYS_CLK period (varies per OMAP family)
|
|
* the SYS_CLK frequency in MHz (varies per board)
|
|
* The formula is:
|
|
*
|
|
* ldo settling time (in micro-seconds)
|
|
* SR2_WTCNT_VALUE = ------------------------------------------
|
|
* (# system clock cycles) * (sys_clk period)
|
|
*
|
|
* Put another way:
|
|
*
|
|
* SR2_WTCNT_VALUE = settling time / (# SYS_CLK cycles / SYS_CLK rate))
|
|
*
|
|
* To avoid dividing by zero multiply both "# clock cycles" and
|
|
* "settling time" by 10 such that the final result is the one we want.
|
|
*/
|
|
|
|
/* Convert SYS_CLK rate to MHz & prevent divide by zero */
|
|
clk_rate = DIV_ROUND_CLOSEST(clk_get_rate(abb->clk), 1000000);
|
|
|
|
/* Calculate cycle rate */
|
|
cycle_rate = DIV_ROUND_CLOSEST(clock_cycles * 10, clk_rate);
|
|
|
|
/* Calulate SR2_WTCNT_VALUE */
|
|
sr2_wt_cnt_val = DIV_ROUND_CLOSEST(abb->settling_time * 10, cycle_rate);
|
|
|
|
dev_dbg(dev, "%s: Clk_rate=%ld, sr2_cnt=0x%08x\n", __func__,
|
|
clk_get_rate(abb->clk), sr2_wt_cnt_val);
|
|
|
|
ti_abb_rmw(regs->sr2_wtcnt_value_mask, sr2_wt_cnt_val, abb->setup_reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ti_abb_init_table() - Initialize ABB table from device tree
|
|
* @dev: device
|
|
* @abb: pointer to the abb instance
|
|
* @rinit_data: regulator initdata
|
|
*
|
|
* Return: 0 on success or appropriate error value when fails
|
|
*/
|
|
static int ti_abb_init_table(struct device *dev, struct ti_abb *abb,
|
|
struct regulator_init_data *rinit_data)
|
|
{
|
|
struct ti_abb_info *info;
|
|
const u32 num_values = 6;
|
|
char *pname = "ti,abb_info";
|
|
u32 i;
|
|
unsigned int *volt_table;
|
|
int num_entries, min_uV = INT_MAX, max_uV = 0;
|
|
struct regulation_constraints *c = &rinit_data->constraints;
|
|
|
|
/*
|
|
* Each abb_info is a set of n-tuple, where n is num_values, consisting
|
|
* of voltage and a set of detection logic for ABB information for that
|
|
* voltage to apply.
|
|
*/
|
|
num_entries = of_property_count_u32_elems(dev->of_node, pname);
|
|
if (num_entries < 0) {
|
|
dev_err(dev, "No '%s' property?\n", pname);
|
|
return num_entries;
|
|
}
|
|
|
|
if (!num_entries || (num_entries % num_values)) {
|
|
dev_err(dev, "All '%s' list entries need %d vals\n", pname,
|
|
num_values);
|
|
return -EINVAL;
|
|
}
|
|
num_entries /= num_values;
|
|
|
|
info = devm_kzalloc(dev, sizeof(*info) * num_entries, GFP_KERNEL);
|
|
if (!info)
|
|
return -ENOMEM;
|
|
|
|
abb->info = info;
|
|
|
|
volt_table = devm_kzalloc(dev, sizeof(unsigned int) * num_entries,
|
|
GFP_KERNEL);
|
|
if (!volt_table)
|
|
return -ENOMEM;
|
|
|
|
abb->rdesc.n_voltages = num_entries;
|
|
abb->rdesc.volt_table = volt_table;
|
|
/* We do not know where the OPP voltage is at the moment */
|
|
abb->current_info_idx = -EINVAL;
|
|
|
|
for (i = 0; i < num_entries; i++, info++, volt_table++) {
|
|
u32 efuse_offset, rbb_mask, fbb_mask, vset_mask;
|
|
u32 efuse_val;
|
|
|
|
/* NOTE: num_values should equal to entries picked up here */
|
|
of_property_read_u32_index(dev->of_node, pname, i * num_values,
|
|
volt_table);
|
|
of_property_read_u32_index(dev->of_node, pname,
|
|
i * num_values + 1, &info->opp_sel);
|
|
of_property_read_u32_index(dev->of_node, pname,
|
|
i * num_values + 2, &efuse_offset);
|
|
of_property_read_u32_index(dev->of_node, pname,
|
|
i * num_values + 3, &rbb_mask);
|
|
of_property_read_u32_index(dev->of_node, pname,
|
|
i * num_values + 4, &fbb_mask);
|
|
of_property_read_u32_index(dev->of_node, pname,
|
|
i * num_values + 5, &vset_mask);
|
|
|
|
dev_dbg(dev,
|
|
"[%d]v=%d ABB=%d ef=0x%x rbb=0x%x fbb=0x%x vset=0x%x\n",
|
|
i, *volt_table, info->opp_sel, efuse_offset, rbb_mask,
|
|
fbb_mask, vset_mask);
|
|
|
|
/* Find min/max for voltage set */
|
|
if (min_uV > *volt_table)
|
|
min_uV = *volt_table;
|
|
if (max_uV < *volt_table)
|
|
max_uV = *volt_table;
|
|
|
|
if (!abb->efuse_base) {
|
|
/* Ignore invalid data, but warn to help cleanup */
|
|
if (efuse_offset || rbb_mask || fbb_mask || vset_mask)
|
|
dev_err(dev, "prop '%s': v=%d,bad efuse/mask\n",
|
|
pname, *volt_table);
|
|
goto check_abb;
|
|
}
|
|
|
|
efuse_val = readl(abb->efuse_base + efuse_offset);
|
|
|
|
/* Use ABB recommendation from Efuse */
|
|
if (efuse_val & rbb_mask)
|
|
info->opp_sel = TI_ABB_SLOW_OPP;
|
|
else if (efuse_val & fbb_mask)
|
|
info->opp_sel = TI_ABB_FAST_OPP;
|
|
else if (rbb_mask || fbb_mask)
|
|
info->opp_sel = TI_ABB_NOMINAL_OPP;
|
|
|
|
dev_dbg(dev,
|
|
"[%d]v=%d efusev=0x%x final ABB=%d\n",
|
|
i, *volt_table, efuse_val, info->opp_sel);
|
|
|
|
/* Use recommended Vset bits from Efuse */
|
|
if (!abb->ldo_base) {
|
|
if (vset_mask)
|
|
dev_err(dev, "prop'%s':v=%d vst=%x LDO base?\n",
|
|
pname, *volt_table, vset_mask);
|
|
continue;
|
|
}
|
|
info->vset = (efuse_val & vset_mask) >> __ffs(vset_mask);
|
|
dev_dbg(dev, "[%d]v=%d vset=%x\n", i, *volt_table, info->vset);
|
|
check_abb:
|
|
switch (info->opp_sel) {
|
|
case TI_ABB_NOMINAL_OPP:
|
|
case TI_ABB_FAST_OPP:
|
|
case TI_ABB_SLOW_OPP:
|
|
/* Valid values */
|
|
break;
|
|
default:
|
|
dev_err(dev, "%s:[%d]v=%d, ABB=%d is invalid! Abort!\n",
|
|
__func__, i, *volt_table, info->opp_sel);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/* Setup the min/max voltage constraints from the supported list */
|
|
c->min_uV = min_uV;
|
|
c->max_uV = max_uV;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct regulator_ops ti_abb_reg_ops = {
|
|
.list_voltage = regulator_list_voltage_table,
|
|
|
|
.set_voltage_sel = ti_abb_set_voltage_sel,
|
|
.get_voltage_sel = ti_abb_get_voltage_sel,
|
|
};
|
|
|
|
/* Default ABB block offsets, IF this changes in future, create new one */
|
|
static const struct ti_abb_reg abb_regs_v1 = {
|
|
/* WARNING: registers are wrongly documented in TRM */
|
|
.setup_off = 0x04,
|
|
.control_off = 0x00,
|
|
|
|
.sr2_wtcnt_value_mask = (0xff << 8),
|
|
.fbb_sel_mask = (0x01 << 2),
|
|
.rbb_sel_mask = (0x01 << 1),
|
|
.sr2_en_mask = (0x01 << 0),
|
|
|
|
.opp_change_mask = (0x01 << 2),
|
|
.opp_sel_mask = (0x03 << 0),
|
|
};
|
|
|
|
static const struct ti_abb_reg abb_regs_v2 = {
|
|
.setup_off = 0x00,
|
|
.control_off = 0x04,
|
|
|
|
.sr2_wtcnt_value_mask = (0xff << 8),
|
|
.fbb_sel_mask = (0x01 << 2),
|
|
.rbb_sel_mask = (0x01 << 1),
|
|
.sr2_en_mask = (0x01 << 0),
|
|
|
|
.opp_change_mask = (0x01 << 2),
|
|
.opp_sel_mask = (0x03 << 0),
|
|
};
|
|
|
|
static const struct ti_abb_reg abb_regs_generic = {
|
|
.sr2_wtcnt_value_mask = (0xff << 8),
|
|
.fbb_sel_mask = (0x01 << 2),
|
|
.rbb_sel_mask = (0x01 << 1),
|
|
.sr2_en_mask = (0x01 << 0),
|
|
|
|
.opp_change_mask = (0x01 << 2),
|
|
.opp_sel_mask = (0x03 << 0),
|
|
};
|
|
|
|
static const struct of_device_id ti_abb_of_match[] = {
|
|
{.compatible = "ti,abb-v1", .data = &abb_regs_v1},
|
|
{.compatible = "ti,abb-v2", .data = &abb_regs_v2},
|
|
{.compatible = "ti,abb-v3", .data = &abb_regs_generic},
|
|
{ },
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, ti_abb_of_match);
|
|
|
|
/**
|
|
* ti_abb_probe() - Initialize an ABB ldo instance
|
|
* @pdev: ABB platform device
|
|
*
|
|
* Initializes an individual ABB LDO for required Body-Bias. ABB is used to
|
|
* addional bias supply to SoC modules for power savings or mandatory stability
|
|
* configuration at certain Operating Performance Points(OPPs).
|
|
*
|
|
* Return: 0 on success or appropriate error value when fails
|
|
*/
|
|
static int ti_abb_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
const struct of_device_id *match;
|
|
struct resource *res;
|
|
struct ti_abb *abb;
|
|
struct regulator_init_data *initdata = NULL;
|
|
struct regulator_dev *rdev = NULL;
|
|
struct regulator_desc *desc;
|
|
struct regulation_constraints *c;
|
|
struct regulator_config config = { };
|
|
char *pname;
|
|
int ret = 0;
|
|
|
|
match = of_match_device(ti_abb_of_match, dev);
|
|
if (!match) {
|
|
/* We do not expect this to happen */
|
|
dev_err(dev, "%s: Unable to match device\n", __func__);
|
|
return -ENODEV;
|
|
}
|
|
if (!match->data) {
|
|
dev_err(dev, "%s: Bad data in match\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
abb = devm_kzalloc(dev, sizeof(struct ti_abb), GFP_KERNEL);
|
|
if (!abb)
|
|
return -ENOMEM;
|
|
abb->regs = match->data;
|
|
|
|
/* Map ABB resources */
|
|
if (abb->regs->setup_off || abb->regs->control_off) {
|
|
pname = "base-address";
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, pname);
|
|
abb->base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(abb->base))
|
|
return PTR_ERR(abb->base);
|
|
|
|
abb->setup_reg = abb->base + abb->regs->setup_off;
|
|
abb->control_reg = abb->base + abb->regs->control_off;
|
|
|
|
} else {
|
|
pname = "control-address";
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, pname);
|
|
abb->control_reg = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(abb->control_reg))
|
|
return PTR_ERR(abb->control_reg);
|
|
|
|
pname = "setup-address";
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, pname);
|
|
abb->setup_reg = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(abb->setup_reg))
|
|
return PTR_ERR(abb->setup_reg);
|
|
}
|
|
|
|
pname = "int-address";
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, pname);
|
|
if (!res) {
|
|
dev_err(dev, "Missing '%s' IO resource\n", pname);
|
|
return -ENODEV;
|
|
}
|
|
/*
|
|
* We may have shared interrupt register offsets which are
|
|
* write-1-to-clear between domains ensuring exclusivity.
|
|
*/
|
|
abb->int_base = devm_ioremap_nocache(dev, res->start,
|
|
resource_size(res));
|
|
if (!abb->int_base) {
|
|
dev_err(dev, "Unable to map '%s'\n", pname);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Map Optional resources */
|
|
pname = "efuse-address";
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, pname);
|
|
if (!res) {
|
|
dev_dbg(dev, "Missing '%s' IO resource\n", pname);
|
|
ret = -ENODEV;
|
|
goto skip_opt;
|
|
}
|
|
|
|
/*
|
|
* We may have shared efuse register offsets which are read-only
|
|
* between domains
|
|
*/
|
|
abb->efuse_base = devm_ioremap_nocache(dev, res->start,
|
|
resource_size(res));
|
|
if (!abb->efuse_base) {
|
|
dev_err(dev, "Unable to map '%s'\n", pname);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
pname = "ldo-address";
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, pname);
|
|
if (!res) {
|
|
dev_dbg(dev, "Missing '%s' IO resource\n", pname);
|
|
ret = -ENODEV;
|
|
goto skip_opt;
|
|
}
|
|
abb->ldo_base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(abb->ldo_base))
|
|
return PTR_ERR(abb->ldo_base);
|
|
|
|
/* IF ldo_base is set, the following are mandatory */
|
|
pname = "ti,ldovbb-override-mask";
|
|
ret =
|
|
of_property_read_u32(pdev->dev.of_node, pname,
|
|
&abb->ldovbb_override_mask);
|
|
if (ret) {
|
|
dev_err(dev, "Missing '%s' (%d)\n", pname, ret);
|
|
return ret;
|
|
}
|
|
if (!abb->ldovbb_override_mask) {
|
|
dev_err(dev, "Invalid property:'%s' set as 0!\n", pname);
|
|
return -EINVAL;
|
|
}
|
|
|
|
pname = "ti,ldovbb-vset-mask";
|
|
ret =
|
|
of_property_read_u32(pdev->dev.of_node, pname,
|
|
&abb->ldovbb_vset_mask);
|
|
if (ret) {
|
|
dev_err(dev, "Missing '%s' (%d)\n", pname, ret);
|
|
return ret;
|
|
}
|
|
if (!abb->ldovbb_vset_mask) {
|
|
dev_err(dev, "Invalid property:'%s' set as 0!\n", pname);
|
|
return -EINVAL;
|
|
}
|
|
|
|
skip_opt:
|
|
pname = "ti,tranxdone-status-mask";
|
|
ret =
|
|
of_property_read_u32(pdev->dev.of_node, pname,
|
|
&abb->txdone_mask);
|
|
if (ret) {
|
|
dev_err(dev, "Missing '%s' (%d)\n", pname, ret);
|
|
return ret;
|
|
}
|
|
if (!abb->txdone_mask) {
|
|
dev_err(dev, "Invalid property:'%s' set as 0!\n", pname);
|
|
return -EINVAL;
|
|
}
|
|
|
|
initdata = of_get_regulator_init_data(dev, pdev->dev.of_node);
|
|
if (!initdata) {
|
|
dev_err(dev, "%s: Unable to alloc regulator init data\n",
|
|
__func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* init ABB opp_sel table */
|
|
ret = ti_abb_init_table(dev, abb, initdata);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* init ABB timing */
|
|
ret = ti_abb_init_timings(dev, abb);
|
|
if (ret)
|
|
return ret;
|
|
|
|
desc = &abb->rdesc;
|
|
desc->name = dev_name(dev);
|
|
desc->owner = THIS_MODULE;
|
|
desc->type = REGULATOR_VOLTAGE;
|
|
desc->ops = &ti_abb_reg_ops;
|
|
|
|
c = &initdata->constraints;
|
|
if (desc->n_voltages > 1)
|
|
c->valid_ops_mask |= REGULATOR_CHANGE_VOLTAGE;
|
|
c->always_on = true;
|
|
|
|
config.dev = dev;
|
|
config.init_data = initdata;
|
|
config.driver_data = abb;
|
|
config.of_node = pdev->dev.of_node;
|
|
|
|
rdev = devm_regulator_register(dev, desc, &config);
|
|
if (IS_ERR(rdev)) {
|
|
ret = PTR_ERR(rdev);
|
|
dev_err(dev, "%s: failed to register regulator(%d)\n",
|
|
__func__, ret);
|
|
return ret;
|
|
}
|
|
platform_set_drvdata(pdev, rdev);
|
|
|
|
/* Enable the ldo if not already done by bootloader */
|
|
ti_abb_rmw(abb->regs->sr2_en_mask, 1, abb->setup_reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
MODULE_ALIAS("platform:ti_abb");
|
|
|
|
static struct platform_driver ti_abb_driver = {
|
|
.probe = ti_abb_probe,
|
|
.driver = {
|
|
.name = "ti_abb",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = of_match_ptr(ti_abb_of_match),
|
|
},
|
|
};
|
|
module_platform_driver(ti_abb_driver);
|
|
|
|
MODULE_DESCRIPTION("Texas Instruments ABB LDO regulator driver");
|
|
MODULE_AUTHOR("Texas Instruments Inc.");
|
|
MODULE_LICENSE("GPL v2");
|