linux-stable/drivers/scsi/lpfc/lpfc_nvme.h
James Smart 318083ad92 scsi: lpfc: add NVME exchange aborts
previous code did little more than log a message.

This patch adds abort path support, modeled after the SCSI code paths.
Currently addresses only the initiator path. Target path under
development, but stubbed out.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-06 23:04:22 -05:00

104 lines
3.7 KiB
C

/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
* Copyright (C) 2017 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Limited and/or its subsidiaries. *
* Copyright (C) 2004-2016 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.broadcom.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
* *
* This program is free software; you can redistribute it and/or *
* modify it under the terms of version 2 of the GNU General *
* Public License as published by the Free Software Foundation. *
* This program is distributed in the hope that it will be useful. *
* ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
* WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
* FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
* DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
* TO BE LEGALLY INVALID. See the GNU General Public License for *
* more details, a copy of which can be found in the file COPYING *
* included with this package. *
********************************************************************/
#define LPFC_NVME_MIN_SEGS 16
#define LPFC_NVME_DEFAULT_SEGS 66 /* 256K IOs - 64 + 2 */
#define LPFC_NVME_MAX_SEGS 510
#define LPFC_NVMET_MIN_POSTBUF 16
#define LPFC_NVMET_DEFAULT_POSTBUF 1024
#define LPFC_NVMET_MAX_POSTBUF 4096
#define LPFC_NVME_WQSIZE 256
#define LPFC_NVME_ERSP_LEN 0x20
struct lpfc_nvme_qhandle {
uint32_t index; /* WQ index to use */
uint32_t qidx; /* queue index passed to create */
uint32_t cpu_id; /* current cpu id at time of create */
};
/* Declare nvme-based local and remote port definitions. */
struct lpfc_nvme_lport {
struct lpfc_vport *vport;
struct list_head rport_list;
struct completion lport_unreg_done;
/* Add sttats counters here */
};
struct lpfc_nvme_rport {
struct list_head list;
struct lpfc_nvme_lport *lport;
struct nvme_fc_remote_port *remoteport;
struct lpfc_nodelist *ndlp;
struct completion rport_unreg_done;
};
struct lpfc_nvme_buf {
struct list_head list;
struct nvmefc_fcp_req *nvmeCmd;
struct lpfc_nvme_rport *nrport;
struct lpfc_nodelist *ndlp;
uint32_t timeout;
uint16_t flags; /* TBD convert exch_busy to flags */
#define LPFC_SBUF_XBUSY 0x1 /* SLI4 hba reported XB on WCQE cmpl */
uint16_t exch_busy; /* SLI4 hba reported XB on complete WCQE */
uint16_t status; /* From IOCB Word 7- ulpStatus */
uint16_t cpu;
uint16_t qidx;
uint16_t sqid;
uint32_t result; /* From IOCB Word 4. */
uint32_t seg_cnt; /* Number of scatter-gather segments returned by
* dma_map_sg. The driver needs this for calls
* to dma_unmap_sg.
*/
dma_addr_t nonsg_phys; /* Non scatter-gather physical address. */
/*
* data and dma_handle are the kernel virtual and bus address of the
* dma-able buffer containing the fcp_cmd, fcp_rsp and a scatter
* gather bde list that supports the sg_tablesize value.
*/
void *data;
dma_addr_t dma_handle;
struct sli4_sge *nvme_sgl;
dma_addr_t dma_phys_sgl;
/* cur_iocbq has phys of the dma-able buffer.
* Iotag is in here
*/
struct lpfc_iocbq cur_iocbq;
wait_queue_head_t *waitq;
unsigned long start_time;
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
uint64_t ts_cmd_start;
uint64_t ts_last_cmd;
uint64_t ts_cmd_wqput;
uint64_t ts_isr_cmpl;
uint64_t ts_data_nvme;
#endif
};