mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-09-05 02:19:51 +00:00
Code Issues Releases Wiki Activity
linux-stable/include/linux/filter.h
Daniel Borkmann 4f3446bb80 bpf: add generic constant blinding for use in jits 
This work adds a generic facility for use from eBPF JIT compilers
that allows for further hardening of JIT generated images through
blinding constants. In response to the original work on BPF JIT
spraying published by Keegan McAllister [1], most BPF JITs were
changed to make images read-only and start at a randomized offset
in the page, where the rest was filled with trap instructions. We
have this nowadays in x86, arm, arm64 and s390 JIT compilers.
Additionally, later work also made eBPF interpreter images read
only for kernels supporting DEBUG_SET_MODULE_RONX, that is, x86,
arm, arm64 and s390 archs as well currently. This is done by
default for mentioned JITs when JITing is enabled. Furthermore,
we had a generic and configurable constant blinding facility on our
todo for quite some time now to further make spraying harder, and
first implementation since around netconf 2016.

We found that for systems where untrusted users can load cBPF/eBPF
code where JIT is enabled, start offset randomization helps a bit
to make jumps into crafted payload harder, but in case where larger
programs that cross page boundary are injected, we again have some
part of the program opcodes at a page start offset. With improved
guessing and more reliable payload injection, chances can increase
to jump into such payload. Elena Reshetova recently wrote a test
case for it [2, 3]. Moreover, eBPF comes with 64 bit constants, which
can leave some more room for payloads. Note that for all this,
additional bugs in the kernel are still required to make the jump
(and of course to guess right, to not jump into a trap) and naturally
the JIT must be enabled, which is disabled by default.

For helping mitigation, the general idea is to provide an option
bpf_jit_harden that admins can tweak along with bpf_jit_enable, so
that for cases where JIT should be enabled for performance reasons,
the generated image can be further hardened with blinding constants
for unpriviledged users (bpf_jit_harden == 1), with trading off
performance for these, but not for privileged ones. We also added
the option of blinding for all users (bpf_jit_harden == 2), which
is quite helpful for testing f.e. with test_bpf.ko. There are no
further e.g. hardening levels of bpf_jit_harden switch intended,
rationale is to have it dead simple to use as on/off. Since this
functionality would need to be duplicated over and over for JIT
compilers to use, which are already complex enough, we provide a
generic eBPF byte-code level based blinding implementation, which is
then just transparently JITed. JIT compilers need to make only a few
changes to integrate this facility and can be migrated one by one.

This option is for eBPF JITs and will be used in x86, arm64, s390
without too much effort, and soon ppc64 JITs, thus that native eBPF
can be blinded as well as cBPF to eBPF migrations, so that both can
be covered with a single implementation. The rule for JITs is that
bpf_jit_blind_constants() must be called from bpf_int_jit_compile(),
and in case blinding is disabled, we follow normally with JITing the
passed program. In case blinding is enabled and we fail during the
process of blinding itself, we must return with the interpreter.
Similarly, in case the JITing process after the blinding failed, we
return normally to the interpreter with the non-blinded code. Meaning,
interpreter doesn't change in any way and operates on eBPF code as
usual. For doing this pre-JIT blinding step, we need to make use of
a helper/auxiliary register, here BPF_REG_AX. This is strictly internal
to the JIT and not in any way part of the eBPF architecture. Just like
in the same way as JITs internally make use of some helper registers
when emitting code, only that here the helper register is one
abstraction level higher in eBPF bytecode, but nevertheless in JIT
phase. That helper register is needed since f.e. manually written
program can issue loads to all registers of eBPF architecture.

The core concept with the additional register is: blind out all 32
and 64 bit constants by converting BPF_K based instructions into a
small sequence from K_VAL into ((RND ^ K_VAL) ^ RND). Therefore, this
is transformed into: BPF_REG_AX := (RND ^ K_VAL), BPF_REG_AX ^= RND,
and REG <OP> BPF_REG_AX, so actual operation on the target register
is translated from BPF_K into BPF_X one that is operating on
BPF_REG_AX's content. During rewriting phase when blinding, RND is
newly generated via prandom_u32() for each processed instruction.
64 bit loads are split into two 32 bit loads to make translation and
patching not too complex. Only basic thing required by JITs is to
call the helper bpf_jit_blind_constants()/bpf_jit_prog_release_other()
pair, and to map BPF_REG_AX into an unused register.

Small bpf_jit_disasm extract from [2] when applied to x86 JIT:

echo 0 > /proc/sys/net/core/bpf_jit_harden

  ffffffffa034f5e9 + <x>:
  [...]
  39:   mov    $0xa8909090,%eax
  3e:   mov    $0xa8909090,%eax
  43:   mov    $0xa8ff3148,%eax
  48:   mov    $0xa89081b4,%eax
  4d:   mov    $0xa8900bb0,%eax
  52:   mov    $0xa810e0c1,%eax
  57:   mov    $0xa8908eb4,%eax
  5c:   mov    $0xa89020b0,%eax
  [...]

echo 1 > /proc/sys/net/core/bpf_jit_harden

  ffffffffa034f1e5 + <x>:
  [...]
  39:   mov    $0xe1192563,%r10d
  3f:   xor    $0x4989b5f3,%r10d
  46:   mov    %r10d,%eax
  49:   mov    $0xb8296d93,%r10d
  4f:   xor    $0x10b9fd03,%r10d
  56:   mov    %r10d,%eax
  59:   mov    $0x8c381146,%r10d
  5f:   xor    $0x24c7200e,%r10d
  66:   mov    %r10d,%eax
  69:   mov    $0xeb2a830e,%r10d
  6f:   xor    $0x43ba02ba,%r10d
  76:   mov    %r10d,%eax
  79:   mov    $0xd9730af,%r10d
  7f:   xor    $0xa5073b1f,%r10d
  86:   mov    %r10d,%eax
  89:   mov    $0x9a45662b,%r10d
  8f:   xor    $0x325586ea,%r10d
  96:   mov    %r10d,%eax
  [...]

As can be seen, original constants that carry payload are hidden
when enabled, actual operations are transformed from constant-based
to register-based ones, making jumps into constants ineffective.
Above extract/example uses single BPF load instruction over and
over, but of course all instructions with constants are blinded.

Performance wise, JIT with blinding performs a bit slower than just
JIT and faster than interpreter case. This is expected, since we
still get all the performance benefits from JITing and in normal
use-cases not every single instruction needs to be blinded. Summing
up all 296 test cases averaged over multiple runs from test_bpf.ko
suite, interpreter was 55% slower than JIT only and JIT with blinding
was 8% slower than JIT only. Since there are also some extremes in
the test suite, I expect for ordinary workloads that the performance
for the JIT with blinding case is even closer to JIT only case,
f.e. nmap test case from suite has averaged timings in ns 29 (JIT),
35 (+ blinding), and 151 (interpreter).

BPF test suite, seccomp test suite, eBPF sample code and various
bigger networking eBPF programs have been tested with this and were
running fine. For testing purposes, I also adapted interpreter and
redirected blinded eBPF image to interpreter and also here all tests
pass.

  [1] http://mainisusuallyafunction.blogspot.com/2012/11/attacking-hardened-linux-systems-with.html
  [2] https://github.com/01org/jit-spray-poc-for-ksp/
  [3] http://www.openwall.com/lists/kernel-hardening/2016/05/03/5

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Elena Reshetova <elena.reshetova@intel.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-16 13:49:32 -04:00

651 lines
17 KiB
C
Raw Blame History

/*
* Linux Socket Filter Data Structures
*/
#ifndef __LINUX_FILTER_H__
#define __LINUX_FILTER_H__
#include <stdarg.h>
#include <linux/atomic.h>
#include <linux/compat.h>
#include <linux/skbuff.h>
#include <linux/linkage.h>
#include <linux/printk.h>
#include <linux/workqueue.h>
#include <linux/sched.h>
#include <linux/capability.h>
#include <net/sch_generic.h>
#include <asm/cacheflush.h>
#include <uapi/linux/filter.h>
#include <uapi/linux/bpf.h>
struct sk_buff;
struct sock;
struct seccomp_data;
struct bpf_prog_aux;
/* ArgX, context and stack frame pointer register positions. Note,
* Arg1, Arg2, Arg3, etc are used as argument mappings of function
* calls in BPF_CALL instruction.
*/
#define BPF_REG_ARG1 BPF_REG_1
#define BPF_REG_ARG2 BPF_REG_2
#define BPF_REG_ARG3 BPF_REG_3
#define BPF_REG_ARG4 BPF_REG_4
#define BPF_REG_ARG5 BPF_REG_5
#define BPF_REG_CTX BPF_REG_6
#define BPF_REG_FP BPF_REG_10
/* Additional register mappings for converted user programs. */
#define BPF_REG_A BPF_REG_0
#define BPF_REG_X BPF_REG_7
#define BPF_REG_TMP BPF_REG_8
/* Kernel hidden auxiliary/helper register for hardening step.
* Only used by eBPF JITs. It's nothing more than a temporary
* register that JITs use internally, only that here it's part
* of eBPF instructions that have been rewritten for blinding
* constants. See JIT pre-step in bpf_jit_blind_constants().
*/
#define BPF_REG_AX MAX_BPF_REG
#define MAX_BPF_JIT_REG (MAX_BPF_REG + 1)
/* BPF program can access up to 512 bytes of stack space. */
#define MAX_BPF_STACK 512
/* Helper macros for filter block array initializers. */
/* ALU ops on registers, bpf_add|sub|...: dst_reg += src_reg */
#define BPF_ALU64_REG(OP, DST, SRC) \
((struct bpf_insn) { \
.code = BPF_ALU64 | BPF_OP(OP) | BPF_X, \
.dst_reg = DST, \
.src_reg = SRC, \
.off = 0, \
.imm = 0 })
#define BPF_ALU32_REG(OP, DST, SRC) \
((struct bpf_insn) { \
.code = BPF_ALU | BPF_OP(OP) | BPF_X, \
.dst_reg = DST, \
.src_reg = SRC, \
.off = 0, \
.imm = 0 })
/* ALU ops on immediates, bpf_add|sub|...: dst_reg += imm32 */
#define BPF_ALU64_IMM(OP, DST, IMM) \
((struct bpf_insn) { \
.code = BPF_ALU64 | BPF_OP(OP) | BPF_K, \
.dst_reg = DST, \
.src_reg = 0, \
.off = 0, \
.imm = IMM })
#define BPF_ALU32_IMM(OP, DST, IMM) \
((struct bpf_insn) { \
.code = BPF_ALU | BPF_OP(OP) | BPF_K, \
.dst_reg = DST, \
.src_reg = 0, \
.off = 0, \
.imm = IMM })
/* Endianess conversion, cpu_to_{l,b}e(), {l,b}e_to_cpu() */
#define BPF_ENDIAN(TYPE, DST, LEN) \
((struct bpf_insn) { \
.code = BPF_ALU | BPF_END | BPF_SRC(TYPE), \
.dst_reg = DST, \
.src_reg = 0, \
.off = 0, \
.imm = LEN })
/* Short form of mov, dst_reg = src_reg */
#define BPF_MOV64_REG(DST, SRC) \
((struct bpf_insn) { \
.code = BPF_ALU64 | BPF_MOV | BPF_X, \
.dst_reg = DST, \
.src_reg = SRC, \
.off = 0, \
.imm = 0 })
#define BPF_MOV32_REG(DST, SRC) \
((struct bpf_insn) { \
.code = BPF_ALU | BPF_MOV | BPF_X, \
.dst_reg = DST, \
.src_reg = SRC, \
.off = 0, \
.imm = 0 })
/* Short form of mov, dst_reg = imm32 */
#define BPF_MOV64_IMM(DST, IMM) \
((struct bpf_insn) { \
.code = BPF_ALU64 | BPF_MOV | BPF_K, \
.dst_reg = DST, \
.src_reg = 0, \
.off = 0, \
.imm = IMM })
#define BPF_MOV32_IMM(DST, IMM) \
((struct bpf_insn) { \
.code = BPF_ALU | BPF_MOV | BPF_K, \
.dst_reg = DST, \
.src_reg = 0, \
.off = 0, \
.imm = IMM })
/* BPF_LD_IMM64 macro encodes single 'load 64-bit immediate' insn */
#define BPF_LD_IMM64(DST, IMM) \
BPF_LD_IMM64_RAW(DST, 0, IMM)
#define BPF_LD_IMM64_RAW(DST, SRC, IMM) \
((struct bpf_insn) { \
.code = BPF_LD | BPF_DW | BPF_IMM, \
.dst_reg = DST, \
.src_reg = SRC, \
.off = 0, \
.imm = (__u32) (IMM) }), \
((struct bpf_insn) { \
.code = 0, /* zero is reserved opcode */ \
.dst_reg = 0, \
.src_reg = 0, \
.off = 0, \
.imm = ((__u64) (IMM)) >> 32 })
/* pseudo BPF_LD_IMM64 insn used to refer to process-local map_fd */
#define BPF_LD_MAP_FD(DST, MAP_FD) \
BPF_LD_IMM64_RAW(DST, BPF_PSEUDO_MAP_FD, MAP_FD)
/* Short form of mov based on type, BPF_X: dst_reg = src_reg, BPF_K: dst_reg = imm32 */
#define BPF_MOV64_RAW(TYPE, DST, SRC, IMM) \
((struct bpf_insn) { \
.code = BPF_ALU64 | BPF_MOV | BPF_SRC(TYPE), \
.dst_reg = DST, \
.src_reg = SRC, \
.off = 0, \
.imm = IMM })
#define BPF_MOV32_RAW(TYPE, DST, SRC, IMM) \
((struct bpf_insn) { \
.code = BPF_ALU | BPF_MOV | BPF_SRC(TYPE), \
.dst_reg = DST, \
.src_reg = SRC, \
.off = 0, \
.imm = IMM })
/* Direct packet access, R0 = *(uint *) (skb->data + imm32) */
#define BPF_LD_ABS(SIZE, IMM) \
((struct bpf_insn) { \
.code = BPF_LD | BPF_SIZE(SIZE) | BPF_ABS, \
.dst_reg = 0, \
.src_reg = 0, \
.off = 0, \
.imm = IMM })
/* Indirect packet access, R0 = *(uint *) (skb->data + src_reg + imm32) */
#define BPF_LD_IND(SIZE, SRC, IMM) \
((struct bpf_insn) { \
.code = BPF_LD | BPF_SIZE(SIZE) | BPF_IND, \
.dst_reg = 0, \
.src_reg = SRC, \
.off = 0, \
.imm = IMM })
/* Memory load, dst_reg = *(uint *) (src_reg + off16) */
#define BPF_LDX_MEM(SIZE, DST, SRC, OFF) \
((struct bpf_insn) { \
.code = BPF_LDX | BPF_SIZE(SIZE) | BPF_MEM, \
.dst_reg = DST, \
.src_reg = SRC, \
.off = OFF, \
.imm = 0 })
/* Memory store, *(uint *) (dst_reg + off16) = src_reg */
#define BPF_STX_MEM(SIZE, DST, SRC, OFF) \
((struct bpf_insn) { \
.code = BPF_STX | BPF_SIZE(SIZE) | BPF_MEM, \
.dst_reg = DST, \
.src_reg = SRC, \
.off = OFF, \
.imm = 0 })
/* Atomic memory add, *(uint *)(dst_reg + off16) += src_reg */
#define BPF_STX_XADD(SIZE, DST, SRC, OFF) \
((struct bpf_insn) { \
.code = BPF_STX | BPF_SIZE(SIZE) | BPF_XADD, \
.dst_reg = DST, \
.src_reg = SRC, \
.off = OFF, \
.imm = 0 })
/* Memory store, *(uint *) (dst_reg + off16) = imm32 */
#define BPF_ST_MEM(SIZE, DST, OFF, IMM) \
((struct bpf_insn) { \
.code = BPF_ST | BPF_SIZE(SIZE) | BPF_MEM, \
.dst_reg = DST, \
.src_reg = 0, \
.off = OFF, \
.imm = IMM })
/* Conditional jumps against registers, if (dst_reg 'op' src_reg) goto pc + off16 */
#define BPF_JMP_REG(OP, DST, SRC, OFF) \
((struct bpf_insn) { \
.code = BPF_JMP | BPF_OP(OP) | BPF_X, \
.dst_reg = DST, \
.src_reg = SRC, \
.off = OFF, \
.imm = 0 })
/* Conditional jumps against immediates, if (dst_reg 'op' imm32) goto pc + off16 */
#define BPF_JMP_IMM(OP, DST, IMM, OFF) \
((struct bpf_insn) { \
.code = BPF_JMP | BPF_OP(OP) | BPF_K, \
.dst_reg = DST, \
.src_reg = 0, \
.off = OFF, \
.imm = IMM })
/* Function call */
#define BPF_EMIT_CALL(FUNC) \
((struct bpf_insn) { \
.code = BPF_JMP | BPF_CALL, \
.dst_reg = 0, \
.src_reg = 0, \
.off = 0, \
.imm = ((FUNC) - __bpf_call_base) })
/* Raw code statement block */
#define BPF_RAW_INSN(CODE, DST, SRC, OFF, IMM) \
((struct bpf_insn) { \
.code = CODE, \
.dst_reg = DST, \
.src_reg = SRC, \
.off = OFF, \
.imm = IMM })
/* Program exit */
#define BPF_EXIT_INSN() \
((struct bpf_insn) { \
.code = BPF_JMP | BPF_EXIT, \
.dst_reg = 0, \
.src_reg = 0, \
.off = 0, \
.imm = 0 })
/* Internal classic blocks for direct assignment */
#define __BPF_STMT(CODE, K) \
((struct sock_filter) BPF_STMT(CODE, K))
#define __BPF_JUMP(CODE, K, JT, JF) \
((struct sock_filter) BPF_JUMP(CODE, K, JT, JF))
#define bytes_to_bpf_size(bytes) \
({ \
int bpf_size = -EINVAL; \
\
if (bytes == sizeof(u8)) \
bpf_size = BPF_B; \
else if (bytes == sizeof(u16)) \
bpf_size = BPF_H; \
else if (bytes == sizeof(u32)) \
bpf_size = BPF_W; \
else if (bytes == sizeof(u64)) \
bpf_size = BPF_DW; \
\
bpf_size; \
})
#ifdef CONFIG_COMPAT
/* A struct sock_filter is architecture independent. */
struct compat_sock_fprog {
u16 len;
compat_uptr_t filter; /* struct sock_filter * */
};
#endif
struct sock_fprog_kern {
u16 len;
struct sock_filter *filter;
};
struct bpf_binary_header {
unsigned int pages;
u8 image[];
};
struct bpf_prog {
u16 pages; /* Number of allocated pages */
kmemcheck_bitfield_begin(meta);
u16 jited:1, /* Is our filter JIT'ed? */
gpl_compatible:1, /* Is filter GPL compatible? */
cb_access:1, /* Is control block accessed? */
dst_needed:1; /* Do we need dst entry? */
kmemcheck_bitfield_end(meta);
u32 len; /* Number of filter blocks */
enum bpf_prog_type type; /* Type of BPF program */
struct bpf_prog_aux *aux; /* Auxiliary fields */
struct sock_fprog_kern *orig_prog; /* Original BPF program */
unsigned int (*bpf_func)(const struct sk_buff *skb,
const struct bpf_insn *filter);
/* Instructions for interpreter */
union {
struct sock_filter insns[0];
struct bpf_insn insnsi[0];
};
};
struct sk_filter {
atomic_t refcnt;
struct rcu_head rcu;
struct bpf_prog *prog;
};
#define BPF_PROG_RUN(filter, ctx) (*filter->bpf_func)(ctx, filter->insnsi)
#define BPF_SKB_CB_LEN QDISC_CB_PRIV_LEN
struct bpf_skb_data_end {
struct qdisc_skb_cb qdisc_cb;
void *data_end;
};
/* compute the linear packet data range [data, data_end) which
* will be accessed by cls_bpf and act_bpf programs
*/
static inline void bpf_compute_data_end(struct sk_buff *skb)
{
struct bpf_skb_data_end *cb = (struct bpf_skb_data_end *)skb->cb;
BUILD_BUG_ON(sizeof(*cb) > FIELD_SIZEOF(struct sk_buff, cb));
cb->data_end = skb->data + skb_headlen(skb);
}
static inline u8 *bpf_skb_cb(struct sk_buff *skb)
{
/* eBPF programs may read/write skb->cb[] area to transfer meta
* data between tail calls. Since this also needs to work with
* tc, that scratch memory is mapped to qdisc_skb_cb's data area.
*
* In some socket filter cases, the cb unfortunately needs to be
* saved/restored so that protocol specific skb->cb[] data won't
* be lost. In any case, due to unpriviledged eBPF programs
* attached to sockets, we need to clear the bpf_skb_cb() area
* to not leak previous contents to user space.
*/
BUILD_BUG_ON(FIELD_SIZEOF(struct __sk_buff, cb) != BPF_SKB_CB_LEN);
BUILD_BUG_ON(FIELD_SIZEOF(struct __sk_buff, cb) !=
FIELD_SIZEOF(struct qdisc_skb_cb, data));
return qdisc_skb_cb(skb)->data;
}
static inline u32 bpf_prog_run_save_cb(const struct bpf_prog *prog,
struct sk_buff *skb)
{
u8 *cb_data = bpf_skb_cb(skb);
u8 cb_saved[BPF_SKB_CB_LEN];
u32 res;
if (unlikely(prog->cb_access)) {
memcpy(cb_saved, cb_data, sizeof(cb_saved));
memset(cb_data, 0, sizeof(cb_saved));
}
res = BPF_PROG_RUN(prog, skb);
if (unlikely(prog->cb_access))
memcpy(cb_data, cb_saved, sizeof(cb_saved));
return res;
}
static inline u32 bpf_prog_run_clear_cb(const struct bpf_prog *prog,
struct sk_buff *skb)
{
u8 *cb_data = bpf_skb_cb(skb);
if (unlikely(prog->cb_access))
memset(cb_data, 0, BPF_SKB_CB_LEN);
return BPF_PROG_RUN(prog, skb);
}
static inline unsigned int bpf_prog_size(unsigned int proglen)
{
return max(sizeof(struct bpf_prog),
offsetof(struct bpf_prog, insns[proglen]));
}
static inline bool bpf_prog_was_classic(const struct bpf_prog *prog)
{
/* When classic BPF programs have been loaded and the arch
* does not have a classic BPF JIT (anymore), they have been
* converted via bpf_migrate_filter() to eBPF and thus always
* have an unspec program type.
*/
return prog->type == BPF_PROG_TYPE_UNSPEC;
}
#define bpf_classic_proglen(fprog) (fprog->len * sizeof(fprog->filter[0]))
#ifdef CONFIG_DEBUG_SET_MODULE_RONX
static inline void bpf_prog_lock_ro(struct bpf_prog *fp)
{
set_memory_ro((unsigned long)fp, fp->pages);
}
static inline void bpf_prog_unlock_ro(struct bpf_prog *fp)
{
set_memory_rw((unsigned long)fp, fp->pages);
}
#else
static inline void bpf_prog_lock_ro(struct bpf_prog *fp)
{
}
static inline void bpf_prog_unlock_ro(struct bpf_prog *fp)
{
}
#endif /* CONFIG_DEBUG_SET_MODULE_RONX */
int sk_filter(struct sock *sk, struct sk_buff *skb);
struct bpf_prog *bpf_prog_select_runtime(struct bpf_prog *fp, int *err);
void bpf_prog_free(struct bpf_prog *fp);
struct bpf_prog *bpf_prog_alloc(unsigned int size, gfp_t gfp_extra_flags);
struct bpf_prog *bpf_prog_realloc(struct bpf_prog *fp_old, unsigned int size,
gfp_t gfp_extra_flags);
void __bpf_prog_free(struct bpf_prog *fp);
static inline void bpf_prog_unlock_free(struct bpf_prog *fp)
{
bpf_prog_unlock_ro(fp);
__bpf_prog_free(fp);
}
typedef int (*bpf_aux_classic_check_t)(struct sock_filter *filter,
unsigned int flen);
int bpf_prog_create(struct bpf_prog **pfp, struct sock_fprog_kern *fprog);
int bpf_prog_create_from_user(struct bpf_prog **pfp, struct sock_fprog *fprog,
bpf_aux_classic_check_t trans, bool save_orig);
void bpf_prog_destroy(struct bpf_prog *fp);
int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk);
int sk_attach_bpf(u32 ufd, struct sock *sk);
int sk_reuseport_attach_filter(struct sock_fprog *fprog, struct sock *sk);
int sk_reuseport_attach_bpf(u32 ufd, struct sock *sk);
int sk_detach_filter(struct sock *sk);
int sk_get_filter(struct sock *sk, struct sock_filter __user *filter,
unsigned int len);
bool sk_filter_charge(struct sock *sk, struct sk_filter *fp);
void sk_filter_uncharge(struct sock *sk, struct sk_filter *fp);
u64 __bpf_call_base(u64 r1, u64 r2, u64 r3, u64 r4, u64 r5);
struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog);
bool bpf_helper_changes_skb_data(void *func);
struct bpf_prog *bpf_patch_insn_single(struct bpf_prog *prog, u32 off,
const struct bpf_insn *patch, u32 len);
#ifdef CONFIG_BPF_JIT
extern int bpf_jit_enable;
extern int bpf_jit_harden;
typedef void (*bpf_jit_fill_hole_t)(void *area, unsigned int size);
struct bpf_binary_header *
bpf_jit_binary_alloc(unsigned int proglen, u8 **image_ptr,
unsigned int alignment,
bpf_jit_fill_hole_t bpf_fill_ill_insns);
void bpf_jit_binary_free(struct bpf_binary_header *hdr);
void bpf_jit_compile(struct bpf_prog *fp);
void bpf_jit_free(struct bpf_prog *fp);
struct bpf_prog *bpf_jit_blind_constants(struct bpf_prog *fp);
void bpf_jit_prog_release_other(struct bpf_prog *fp, struct bpf_prog *fp_other);
static inline void bpf_jit_dump(unsigned int flen, unsigned int proglen,
u32 pass, void *image)
{
pr_err("flen=%u proglen=%u pass=%u image=%pK from=%s pid=%d\n", flen,
proglen, pass, image, current->comm, task_pid_nr(current));
if (image)
print_hex_dump(KERN_ERR, "JIT code: ", DUMP_PREFIX_OFFSET,
16, 1, image, proglen, false);
}
static inline bool bpf_jit_is_ebpf(void)
{
# ifdef CONFIG_HAVE_EBPF_JIT
return true;
# else
return false;
# endif
}
static inline bool bpf_jit_blinding_enabled(void)
{
/* These are the prerequisites, should someone ever have the
* idea to call blinding outside of them, we make sure to
* bail out.
*/
if (!bpf_jit_is_ebpf())
return false;
if (!bpf_jit_enable)
return false;
if (!bpf_jit_harden)
return false;
if (bpf_jit_harden == 1 && capable(CAP_SYS_ADMIN))
return false;
return true;
}
#else
static inline void bpf_jit_compile(struct bpf_prog *fp)
{
}
static inline void bpf_jit_free(struct bpf_prog *fp)
{
bpf_prog_unlock_free(fp);
}
#endif /* CONFIG_BPF_JIT */
#define BPF_ANC BIT(15)
static inline bool bpf_needs_clear_a(const struct sock_filter *first)
{
switch (first->code) {
case BPF_RET | BPF_K:
case BPF_LD | BPF_W | BPF_LEN:
return false;
case BPF_LD | BPF_W | BPF_ABS:
case BPF_LD | BPF_H | BPF_ABS:
case BPF_LD | BPF_B | BPF_ABS:
if (first->k == SKF_AD_OFF + SKF_AD_ALU_XOR_X)
return true;
return false;
default:
return true;
}
}
static inline u16 bpf_anc_helper(const struct sock_filter *ftest)
{
BUG_ON(ftest->code & BPF_ANC);
switch (ftest->code) {
case BPF_LD | BPF_W | BPF_ABS:
case BPF_LD | BPF_H | BPF_ABS:
case BPF_LD | BPF_B | BPF_ABS:
#define BPF_ANCILLARY(CODE) case SKF_AD_OFF + SKF_AD_##CODE: \
return BPF_ANC | SKF_AD_##CODE
switch (ftest->k) {
BPF_ANCILLARY(PROTOCOL);
BPF_ANCILLARY(PKTTYPE);
BPF_ANCILLARY(IFINDEX);
BPF_ANCILLARY(NLATTR);
BPF_ANCILLARY(NLATTR_NEST);
BPF_ANCILLARY(MARK);
BPF_ANCILLARY(QUEUE);
BPF_ANCILLARY(HATYPE);
BPF_ANCILLARY(RXHASH);
BPF_ANCILLARY(CPU);
BPF_ANCILLARY(ALU_XOR_X);
BPF_ANCILLARY(VLAN_TAG);
BPF_ANCILLARY(VLAN_TAG_PRESENT);
BPF_ANCILLARY(PAY_OFFSET);
BPF_ANCILLARY(RANDOM);
BPF_ANCILLARY(VLAN_TPID);
}
/* Fallthrough. */
default:
return ftest->code;
}
}
void *bpf_internal_load_pointer_neg_helper(const struct sk_buff *skb,
int k, unsigned int size);
static inline void *bpf_load_pointer(const struct sk_buff *skb, int k,
unsigned int size, void *buffer)
{
if (k >= 0)
return skb_header_pointer(skb, k, size, buffer);
return bpf_internal_load_pointer_neg_helper(skb, k, size);
}
static inline int bpf_tell_extensions(void)
{
return SKF_AD_MAX;
}
#endif /* __LINUX_FILTER_H__ */
Reference in a new issue View git blame Copy permalink