Johannes Berg 095d81cee7 mac80211: disable WMM with invalid parameters ... Some APs (notably a Sitecom WL-153 v1 with firmware 1.45) are sending invalid WMM parameters setting AIFSN, ECWmin and ECWmax to zero. The spec mandates that the value of AIFSN is at least 2, and some cards (e.g. Intel with the iwldvm driver) can't transmit when the invalid QoS parameters are actually uploaded to the firmware. Since there's little chance of being able to guess the values that the AP actually meant, disable WMM if such an invalid case is found. Since ECWmin/ECWmax are allowed to be zero, only verify AIFSN >= 2 and ECWmin <= ECWmax. Reviewed-by: Eliad Peller <eliad@wizery.com> Reported-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>		2013-10-17 15:38:22 +02:00
..
aes_ccm.c	wireless: move crypto constants to ieee80211.h	2013-05-16 22:39:41 +02:00
aes_ccm.h
aes_cmac.c	mac80211: include export.h in aes_cmac	2012-11-07 18:01:54 +01:00
aes_cmac.h
agg-rx.c	mac80211: improve aggregation debug messages	2013-01-18 21:55:15 +01:00
agg-tx.c	mac80211: fix aggregation state with current drivers	2013-01-24 15:43:51 +01:00
cfg.c	mac80211: use sta_info_get_bss() for nl80211 tx and client probing	2013-09-30 11:30:57 +02:00
cfg.h
chan.c	mac80211: add channel switch command and beacon callbacks	2013-08-01 18:30:33 +02:00
debug.h	mac80211: mesh power save basics	2013-02-04 18:57:47 +01:00
debugfs.c	mac80211: remove IEEE80211_HW_SCAN_WHILE_IDLE	2013-02-11 18:45:01 +01:00
debugfs.h	mac80211: use __printf attribute in debugfs	2012-10-18 09:01:57 +02:00
debugfs_key.c	mac80211: move sdata debugfs dir to vif	2013-03-18 20:10:04 +01:00
debugfs_key.h
debugfs_netdev.c	cfg80211/mac80211: use cfg80211 wdev mutex in mac80211	2013-05-25 00:02:16 +02:00
debugfs_netdev.h
debugfs_sta.c	mac80211: add debugfs for driver-buffered TID bitmap	2013-08-01 15:08:24 +02:00
debugfs_sta.h
driver-ops.h	mac80211: add channel switch command and beacon callbacks	2013-08-01 18:30:33 +02:00
event.c
ht.c	mac80211: enable HT overrides for ibss	2013-07-16 09:57:57 +03:00
ibss.c	Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless	2013-08-28 10:36:09 -04:00
ieee80211_i.h	mac80211: disable WMM with invalid parameters	2013-10-17 15:38:22 +02:00
iface.c	mac80211: fix change_interface queue assignments	2013-08-26 09:52:58 +02:00
Kconfig	Driver core patches for 3.9-rc1	2013-02-21 12:05:51 -08:00
key.c	mac80211: add APIs to allow keeping connections after WoWLAN	2013-08-16 12:58:43 +02:00
key.h	wireless: move crypto constants to ieee80211.h	2013-05-16 22:39:41 +02:00
led.c	mac80211: use oneshot blink API for LED triggers	2013-08-01 10:48:49 +02:00
led.h	mac80211: use oneshot blink API for LED triggers	2013-08-01 10:48:49 +02:00
main.c	mac80211: move setting WIPHY_FLAG_SUPPORTS_SCHED_SCAN into drivers	2013-08-23 12:02:26 +02:00
Makefile	mac80211: mesh power save basics	2013-02-04 18:57:47 +01:00
mesh.c	mac80211: only respond to probe request with mesh ID	2013-08-23 15:25:06 +02:00
mesh.h	mac80211: update mesh beacon on workqueue	2013-06-18 15:57:27 +02:00
mesh_hwmp.c	mac80211: parse VHT channel switch IEs	2013-04-16 15:29:45 +02:00
mesh_pathtbl.c	mac80211: return new mpath from mesh_path_add()	2013-04-08 09:16:59 +02:00
mesh_plink.c	mac80211: select and adjust bitrates according to channel mode	2013-07-16 09:58:06 +03:00
mesh_ps.c	mac80211: prevent the buffering or frame transmission to non-assoc mesh STA	2013-07-22 15:32:47 +02:00
mesh_sync.c	mac80211: clean up mesh code	2013-02-15 15:46:37 +01:00
michael.c
michael.h
mlme.c	mac80211: disable WMM with invalid parameters	2013-10-17 15:38:22 +02:00
offchannel.c	mac80211: Run deferred scan if last roc_list item is not started	2013-09-30 12:36:56 +02:00
pm.c	mac80211: fix monitor interface suspend crash regression	2013-07-23 14:02:08 +02:00
rate.c	mac80211: respect rate mask in TX	2013-10-15 15:16:29 +02:00
rate.h	mac80211/rc80211: add chandef to rate initialization	2013-07-16 09:58:02 +03:00
rc80211_minstrel.c	Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next	2013-08-01 15:26:52 -04:00
rc80211_minstrel.h	mac80211/minstrel: use the new rate control API	2013-04-22 16:16:41 +02:00
rc80211_minstrel_debugfs.c	mac80211: cosmetics for minstrel_debugfs	2013-04-17 17:08:23 +02:00
rc80211_minstrel_ht.c	Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next	2013-08-28 13:51:40 -04:00
rc80211_minstrel_ht.h	mac80211/minstrel_ht: use the new rate control API	2013-04-22 16:16:41 +02:00
rc80211_minstrel_ht_debugfs.c	mac80211/minstrel_ht: add support for using CCK rates	2013-02-13 10:56:33 +01:00
rc80211_pid.h
rc80211_pid_algo.c	mac80211/rc80211: add chandef to rate initialization	2013-07-16 09:58:02 +03:00
rc80211_pid_debugfs.c
rx.c	mac80211: drop spoofed packets in ad-hoc mode	2013-09-26 19:56:06 +02:00
scan.c	mac80211: correctly close cancelled scans	2013-10-09 18:40:07 +02:00
spectmgmt.c
sta_info.c	mac80211: initialize power mode for mesh STAs	2013-06-24 15:59:20 +02:00
sta_info.h	mac80211: Ensure tid_start_tx is protected by sta->lock	2013-06-13 10:27:07 +02:00
status.c	mac80211: update sta->last_rx on acked tx frames	2013-09-30 12:34:09 +02:00
tkip.c	mac80211: use just spin_lock() in ieee80211_get_tkip_p2k()	2013-05-16 22:38:06 +02:00
tkip.h
trace.c	mac80211: trace debug messages	2012-06-24 11:33:18 +02:00
trace.h	mac80211: add channel switch command and beacon callbacks	2013-08-01 18:30:33 +02:00
tx.c	mac80211: use sta_info_get_bss() for nl80211 tx and client probing	2013-09-30 11:30:57 +02:00
util.c	mac80211: fix crash if bitrate calculation goes wrong	2013-10-14 09:47:08 +02:00
vht.c	mac80211: Fix VHT bandwidth change event	2013-06-13 11:58:47 +02:00
wep.c	wireless: move crypto constants to ieee80211.h	2013-05-16 22:39:41 +02:00
wep.h
wme.c	mac80211: mesh power save basics	2013-02-04 18:57:47 +01:00
wme.h	mac80211: save wmm_acm per sdata	2012-06-20 17:35:22 +02:00
wpa.c	wireless: move crypto constants to ieee80211.h	2013-05-16 22:39:41 +02:00
wpa.h