Roger Quadros 87517d26d8 ARM: dts: dra7-evm: Add extcon nodes for USB ... On this EVM, the USB cable state has to be determined via the ID pin tied to a GPIO line. We use the gpio-usb-extcon driver to read the ID pin and the extcon framework to forward the USB cable state information to the USB driver so the controller can be configured in the right mode (host/peripheral). Gets USB peripheral mode to work on this EVM. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>		2015-01-30 15:48:39 -08:00
..
boot	ARM: dts: dra7-evm: Add extcon nodes for USB	2015-01-30 15:48:39 -08:00
common	Driver core patches for 3.19-rc1	2014-12-14 16:10:09 -08:00
configs	PM: Eliminate CONFIG_PM_RUNTIME	2014-12-19 22:55:06 +01:00
crypto	crypto: arm - replace memset by memzero_explicit	2014-12-02 22:55:51 +08:00
firmware
include	kernel: Provide READ_ONCE and ASSIGN_ONCE	2014-12-20 16:48:59 -08:00
kernel	More ACPI and power management updates for 3.19-rc1	2014-12-18 20:28:33 -08:00
kvm	3.19 changes for KVM:	2014-12-18 16:05:28 -08:00
lib
mach-asm9260	ARM: add mach-asm9260	2014-11-28 15:06:38 +01:00
mach-at91	ARM: SoC cleanups for 3.19	2014-12-09 14:18:35 -08:00
mach-axxia
mach-bcm	Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip	2014-12-10 08:38:57 -08:00
mach-berlin
mach-clps711x
mach-cns3xxx
mach-davinci	More ACPI and power management updates for 3.19-rc1	2014-12-18 20:28:33 -08:00
mach-dove
mach-ebsa110
mach-efm32
mach-ep93xx
mach-exynos	More ACPI and power management updates for 3.19-rc1	2014-12-18 20:28:33 -08:00
mach-footbridge
mach-gemini
mach-highbank
mach-hisi
mach-imx	Driver core patches for 3.19-rc1	2014-12-14 16:10:09 -08:00
mach-integrator
mach-iop13xx
mach-iop32x
mach-iop33x
mach-ixp4xx
mach-keystone	ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM	2014-12-13 00:42:49 +01:00
mach-ks8695
mach-lpc32xx
mach-mediatek	ARM: SoC DT updates for 3.19	2014-12-09 14:57:37 -08:00
mach-meson
mach-mmp	Please consider pulling the clk framework changes toward 3.19. It is	2014-12-20 16:42:36 -08:00
mach-moxart
mach-msm
mach-mv78xx0
mach-mvebu	ARM: mvebu: use the cpufreq-dt platform_data for independent clocks	2014-12-04 17:31:32 +01:00
mach-mxs
mach-netx
mach-nomadik
mach-nspire
mach-omap1	ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM	2014-12-13 00:42:49 +01:00
mach-omap2	Please consider pulling the clk framework changes toward 3.19. It is	2014-12-20 16:42:36 -08:00
mach-orion5x
mach-picoxcell
mach-prima2
mach-pxa	Driver core patches for 3.19-rc1	2014-12-14 16:10:09 -08:00
mach-qcom
mach-realview
mach-rockchip
mach-rpc
mach-s3c24xx	Driver core patches for 3.19-rc1	2014-12-14 16:10:09 -08:00
mach-s3c64xx
mach-s5pv210
mach-sa1100	Driver core patches for 3.19-rc1	2014-12-14 16:10:09 -08:00
mach-shmobile	Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux	2014-12-15 15:52:01 -08:00
mach-socfpga
mach-spear
mach-sti
mach-sunxi
mach-tegra	ACPI and power management updates for 3.19-rc1	2014-12-10 21:17:00 -08:00
mach-u300	Driver core patches for 3.19-rc1	2014-12-14 16:10:09 -08:00
mach-ux500
mach-versatile
mach-vexpress	ARM: vexpress: Enable regulator framework when MMCI is in use	2014-11-28 21:57:07 +01:00
mach-vt8500
mach-w90x900
mach-zynq	ARM: zynq: Remove secondary_startup() declaration from header	2014-12-01 09:32:22 +01:00
mm	ARM: SoC/iommu configuration for 3.19	2014-12-16 14:53:01 -08:00
net
nwfpe
oprofile
plat-iop
plat-omap
plat-orion	ACPI and power management updates for 3.19-rc1	2014-12-10 21:17:00 -08:00
plat-pxa
plat-samsung	Driver core patches for 3.19-rc1	2014-12-14 16:10:09 -08:00
plat-versatile	ARM: vexpress: Remove non-DT code	2014-11-28 16:08:16 +01:00
tools
vfp
xen	xen/arm: introduce GNTTABOP_cache_flush	2014-12-04 12:41:54 +00:00
Kconfig	Merge branch 'akpm' (second patch-bomb from Andrew)	2014-12-13 13:00:36 -08:00
Kconfig-nommu
Kconfig.debug	Char/Misc driver patches for 3.19-rc1	2014-12-14 16:43:47 -08:00
Makefile