mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-26 12:26:11 +00:00
1009aa1205
This tag contains some major improvements to the RISC-V port, including
the necessary interrupt controller and timer support to actually make it
to userspace. Support for three devices has been added:
* Support for the ISA-mandated timers on RISC-V systems.
* Support for the ISA-mandated first-level interrupt controller on
RISC-V systems, which is handled as part of our core arch code because
it's very small and tightly tied to the ISA.
* Support for SiFive's platform-level interrupt controller, which talks
to the actual devices.
In addition to these new devices, there are a handful of cleanups all
over the RISC-V tree:
* Build fixes for various configurations
* A fix to the vDSO build's makefile so it respects CFLAGS.
* The addition of __lshrti3, a libgcc derived function necessary for
some 32-bit configurations.
* !SMP && PERF_EVENTS
* Cleanups to the arch code to remove the remnants of old versions of
the drivers that were just properly submitted.
* Some dead code from the timer driver, most of which wasn't ever
even compiled.
* Cleanups of some interrupt #defines, which are now local to the
interrupt handling code.
* Fixes to ptrace(), which while not being sufficient to fully make GDB
work are at least sufficient to get simple GDB tasks to work.
* Early printk support via RISC-V's architecturally mandated SBI console
device.
* A fix to our early debug trap handler to ensure it's always aligned.
These patches have all been through a fairly extensive review process,
but as this enables a whole pile of functionality (ie, userspace) I'm
confident we'll need to submit a few more patches. The only concrete
issues I know about are the sys_riscv_flush_icache patches, but as I
managed to screw those up on Friday I figured it'd be best to let them
bake another week.
This tag boots a Fedora root filesystem on QEMU's master branch for me,
and before this morning's rebase (from 4.18-rc8 to 4.18) it booted on
the HiFive Unleashed.
Thanks to Christoph Hellwig and the other guys at WD for getting the new
drivers in shape!
-----BEGIN PGP SIGNATURE-----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=PfnC
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-4.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V updates from Palmer Dabbelt:
"This contains some major improvements to the RISC-V port, including
the necessary interrupt controller and timer support to actually make
it to userspace. Support for three devices has been added:
- the ISA-mandated timers on RISC-V systems.
- the ISA-mandated first-level interrupt controller on RISC-V
systems, which is handled as part of our core arch code because
it's very small and tightly tied to the ISA.
- SiFive's platform-level interrupt controller, which talks to the
actual devices.
In addition to these new devices, there are a handful of cleanups all
over the RISC-V tree:
- build fixes for various configurations:
* A fix to the vDSO build's makefile so it respects CFLAGS.
* The addition of __lshrti3, a libgcc derived function necessary
for some 32-bit configurations.
* !SMP && PERF_EVENTS
- Cleanups to the arch code to remove the remnants of old versions of
the drivers that were just properly submitted.
* Some dead code from the timer driver, most of which wasn't ever
even compiled.
* Cleanups of some interrupt #defines, which are now local to the
interrupt handling code.
- Fixes to ptrace(), which while not being sufficient to fully make
GDB work are at least sufficient to get simple GDB tasks to work.
- Early printk support via RISC-V's architecturally mandated SBI
console device.
- A fix to our early debug trap handler to ensure it's always
aligned.
These patches have all been through a fairly extensive review process,
but as this enables a whole pile of functionality (ie, userspace) I'm
confident we'll need to submit a few more patches. The only concrete
issues I know about are the sys_riscv_flush_icache patches, but as I
managed to screw those up on Friday I figured it'd be best to let them
bake another week.
This tag boots a Fedora root filesystem on QEMU's master branch for
me, and before this morning's rebase (from 4.18-rc8 to 4.18) it booted
on the HiFive Unleashed.
Thanks to Christoph Hellwig and the other guys at WD for getting the
new drivers in shape!"
* tag 'riscv-for-linus-4.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
dt-bindings: interrupt-controller: SiFive Plaform Level Interrupt Controller
dt-bindings: interrupt-controller: RISC-V local interrupt controller
RISC-V: Fix !CONFIG_SMP compilation error
irqchip: add a SiFive PLIC driver
RISC-V: Add the directive for alignment of stvec's value
clocksource: new RISC-V SBI timer driver
RISC-V: implement low-level interrupt handling
RISC-V: add a definition for the SIE SEIE bit
RISC-V: remove INTERRUPT_CAUSE_* defines from asm/irq.h
RISC-V: simplify software interrupt / IPI code
RISC-V: remove timer leftovers
RISC-V: Add early printk support via the SBI console
RISC-V: Don't increment sepc after breakpoint.
RISC-V: implement __lshrti3.
RISC-V: Use KBUILD_CFLAGS instead of KCFLAGS when building the vDSO
85 lines
2.2 KiB
Makefile
85 lines
2.2 KiB
Makefile
# This file is included by the global makefile so that you can add your own
|
|
# architecture-specific flags and dependencies. Remember to do have actions
|
|
# for "archclean" and "archdep" for cleaning up and making dependencies for
|
|
# this architecture
|
|
#
|
|
# This file is subject to the terms and conditions of the GNU General Public
|
|
# License. See the file "COPYING" in the main directory of this archive
|
|
# for more details.
|
|
#
|
|
|
|
OBJCOPYFLAGS := -O binary
|
|
LDFLAGS_vmlinux :=
|
|
ifeq ($(CONFIG_DYNAMIC_FTRACE),y)
|
|
LDFLAGS_vmlinux := --no-relax
|
|
endif
|
|
KBUILD_AFLAGS_MODULE += -fPIC
|
|
KBUILD_CFLAGS_MODULE += -fPIC
|
|
|
|
KBUILD_DEFCONFIG = defconfig
|
|
|
|
export BITS
|
|
ifeq ($(CONFIG_ARCH_RV64I),y)
|
|
BITS := 64
|
|
UTS_MACHINE := riscv64
|
|
|
|
KBUILD_CFLAGS += -mabi=lp64
|
|
KBUILD_AFLAGS += -mabi=lp64
|
|
|
|
KBUILD_CFLAGS += $(call cc-ifversion, -ge, 0500, -DCONFIG_ARCH_SUPPORTS_INT128)
|
|
|
|
KBUILD_MARCH = rv64im
|
|
LDFLAGS += -melf64lriscv
|
|
else
|
|
BITS := 32
|
|
UTS_MACHINE := riscv32
|
|
|
|
KBUILD_CFLAGS += -mabi=ilp32
|
|
KBUILD_AFLAGS += -mabi=ilp32
|
|
KBUILD_MARCH = rv32im
|
|
LDFLAGS += -melf32lriscv
|
|
endif
|
|
|
|
KBUILD_CFLAGS += -Wall
|
|
|
|
ifeq ($(CONFIG_RISCV_ISA_A),y)
|
|
KBUILD_ARCH_A = a
|
|
endif
|
|
ifeq ($(CONFIG_RISCV_ISA_C),y)
|
|
KBUILD_ARCH_C = c
|
|
endif
|
|
|
|
KBUILD_AFLAGS += -march=$(KBUILD_MARCH)$(KBUILD_ARCH_A)fd$(KBUILD_ARCH_C)
|
|
|
|
KBUILD_CFLAGS += -march=$(KBUILD_MARCH)$(KBUILD_ARCH_A)$(KBUILD_ARCH_C)
|
|
KBUILD_CFLAGS += -mno-save-restore
|
|
KBUILD_CFLAGS += -DCONFIG_PAGE_OFFSET=$(CONFIG_PAGE_OFFSET)
|
|
|
|
ifeq ($(CONFIG_CMODEL_MEDLOW),y)
|
|
KBUILD_CFLAGS += -mcmodel=medlow
|
|
endif
|
|
ifeq ($(CONFIG_CMODEL_MEDANY),y)
|
|
KBUILD_CFLAGS += -mcmodel=medany
|
|
endif
|
|
ifeq ($(CONFIG_MODULE_SECTIONS),y)
|
|
KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/riscv/kernel/module.lds
|
|
endif
|
|
|
|
KBUILD_CFLAGS_MODULE += $(call cc-option,-mno-relax)
|
|
|
|
# GCC versions that support the "-mstrict-align" option default to allowing
|
|
# unaligned accesses. While unaligned accesses are explicitly allowed in the
|
|
# RISC-V ISA, they're emulated by machine mode traps on all extant
|
|
# architectures. It's faster to have GCC emit only aligned accesses.
|
|
KBUILD_CFLAGS += $(call cc-option,-mstrict-align)
|
|
|
|
# arch specific predefines for sparse
|
|
CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
|
|
|
|
head-y := arch/riscv/kernel/head.o
|
|
|
|
core-y += arch/riscv/kernel/ arch/riscv/mm/
|
|
|
|
libs-y += arch/riscv/lib/
|
|
|
|
all: vmlinux
|