mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-09-05 10:29:37 +00:00
Code Issues Releases Wiki Activity
linux-stable/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c
Thomas Gleixner 5b497af42f treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 295 
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of version 2 of the gnu general public license as
  published by the free software foundation this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 64 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.894819585@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:36:38 +02:00

396 lines
11 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-only
/*
* RTL8XXXU mac80211 USB driver - 8723a specific subdriver
*
* Copyright (c) 2014 - 2017 Jes Sorensen <Jes.Sorensen@gmail.com>
*
* Portions, notably calibration code:
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This driver was written as a replacement for the vendor provided
* rtl8723au driver. As the Realtek 8xxx chips are very similar in
* their programming interface, I have started adding support for
* additional 8xxx chips like the 8192cu, 8188cus, etc.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/list.h>
#include <linux/usb.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/wireless.h>
#include <linux/firmware.h>
#include <linux/moduleparam.h>
#include <net/mac80211.h>
#include "rtl8xxxu.h"
#include "rtl8xxxu_regs.h"
static struct rtl8xxxu_power_base rtl8723a_power_base = {
.reg_0e00 = 0x0a0c0c0c,
.reg_0e04 = 0x02040608,
.reg_0e08 = 0x00000000,
.reg_086c = 0x00000000,
.reg_0e10 = 0x0a0c0d0e,
.reg_0e14 = 0x02040608,
.reg_0e18 = 0x0a0c0d0e,
.reg_0e1c = 0x02040608,
.reg_0830 = 0x0a0c0c0c,
.reg_0834 = 0x02040608,
.reg_0838 = 0x00000000,
.reg_086c_2 = 0x00000000,
.reg_083c = 0x0a0c0d0e,
.reg_0848 = 0x02040608,
.reg_084c = 0x0a0c0d0e,
.reg_0868 = 0x02040608,
};
static struct rtl8xxxu_rfregval rtl8723au_radioa_1t_init_table[] = {
{0x00, 0x00030159}, {0x01, 0x00031284},
{0x02, 0x00098000}, {0x03, 0x00039c63},
{0x04, 0x000210e7}, {0x09, 0x0002044f},
{0x0a, 0x0001a3f1}, {0x0b, 0x00014787},
{0x0c, 0x000896fe}, {0x0d, 0x0000e02c},
{0x0e, 0x00039ce7}, {0x0f, 0x00000451},
{0x19, 0x00000000}, {0x1a, 0x00030355},
{0x1b, 0x00060a00}, {0x1c, 0x000fc378},
{0x1d, 0x000a1250}, {0x1e, 0x0000024f},
{0x1f, 0x00000000}, {0x20, 0x0000b614},
{0x21, 0x0006c000}, {0x22, 0x00000000},
{0x23, 0x00001558}, {0x24, 0x00000060},
{0x25, 0x00000483}, {0x26, 0x0004f000},
{0x27, 0x000ec7d9}, {0x28, 0x00057730},
{0x29, 0x00004783}, {0x2a, 0x00000001},
{0x2b, 0x00021334}, {0x2a, 0x00000000},
{0x2b, 0x00000054}, {0x2a, 0x00000001},
{0x2b, 0x00000808}, {0x2b, 0x00053333},
{0x2c, 0x0000000c}, {0x2a, 0x00000002},
{0x2b, 0x00000808}, {0x2b, 0x0005b333},
{0x2c, 0x0000000d}, {0x2a, 0x00000003},
{0x2b, 0x00000808}, {0x2b, 0x00063333},
{0x2c, 0x0000000d}, {0x2a, 0x00000004},
{0x2b, 0x00000808}, {0x2b, 0x0006b333},
{0x2c, 0x0000000d}, {0x2a, 0x00000005},
{0x2b, 0x00000808}, {0x2b, 0x00073333},
{0x2c, 0x0000000d}, {0x2a, 0x00000006},
{0x2b, 0x00000709}, {0x2b, 0x0005b333},
{0x2c, 0x0000000d}, {0x2a, 0x00000007},
{0x2b, 0x00000709}, {0x2b, 0x00063333},
{0x2c, 0x0000000d}, {0x2a, 0x00000008},
{0x2b, 0x0000060a}, {0x2b, 0x0004b333},
{0x2c, 0x0000000d}, {0x2a, 0x00000009},
{0x2b, 0x0000060a}, {0x2b, 0x00053333},
{0x2c, 0x0000000d}, {0x2a, 0x0000000a},
{0x2b, 0x0000060a}, {0x2b, 0x0005b333},
{0x2c, 0x0000000d}, {0x2a, 0x0000000b},
{0x2b, 0x0000060a}, {0x2b, 0x00063333},
{0x2c, 0x0000000d}, {0x2a, 0x0000000c},
{0x2b, 0x0000060a}, {0x2b, 0x0006b333},
{0x2c, 0x0000000d}, {0x2a, 0x0000000d},
{0x2b, 0x0000060a}, {0x2b, 0x00073333},
{0x2c, 0x0000000d}, {0x2a, 0x0000000e},
{0x2b, 0x0000050b}, {0x2b, 0x00066666},
{0x2c, 0x0000001a}, {0x2a, 0x000e0000},
{0x10, 0x0004000f}, {0x11, 0x000e31fc},
{0x10, 0x0006000f}, {0x11, 0x000ff9f8},
{0x10, 0x0002000f}, {0x11, 0x000203f9},
{0x10, 0x0003000f}, {0x11, 0x000ff500},
{0x10, 0x00000000}, {0x11, 0x00000000},
{0x10, 0x0008000f}, {0x11, 0x0003f100},
{0x10, 0x0009000f}, {0x11, 0x00023100},
{0x12, 0x00032000}, {0x12, 0x00071000},
{0x12, 0x000b0000}, {0x12, 0x000fc000},
{0x13, 0x000287b3}, {0x13, 0x000244b7},
{0x13, 0x000204ab}, {0x13, 0x0001c49f},
{0x13, 0x00018493}, {0x13, 0x0001429b},
{0x13, 0x00010299}, {0x13, 0x0000c29c},
{0x13, 0x000081a0}, {0x13, 0x000040ac},
{0x13, 0x00000020}, {0x14, 0x0001944c},
{0x14, 0x00059444}, {0x14, 0x0009944c},
{0x14, 0x000d9444}, {0x15, 0x0000f474},
{0x15, 0x0004f477}, {0x15, 0x0008f455},
{0x15, 0x000cf455}, {0x16, 0x00000339},
{0x16, 0x00040339}, {0x16, 0x00080339},
{0x16, 0x000c0366}, {0x00, 0x00010159},
{0x18, 0x0000f401}, {0xfe, 0x00000000},
{0xfe, 0x00000000}, {0x1f, 0x00000003},
{0xfe, 0x00000000}, {0xfe, 0x00000000},
{0x1e, 0x00000247}, {0x1f, 0x00000000},
{0x00, 0x00030159},
{0xff, 0xffffffff}
};
static int rtl8723au_parse_efuse(struct rtl8xxxu_priv *priv)
{
struct rtl8723au_efuse *efuse = &priv->efuse_wifi.efuse8723;
if (efuse->rtl_id != cpu_to_le16(0x8129))
return -EINVAL;
ether_addr_copy(priv->mac_addr, efuse->mac_addr);
memcpy(priv->cck_tx_power_index_A,
efuse->cck_tx_power_index_A,
sizeof(efuse->cck_tx_power_index_A));
memcpy(priv->cck_tx_power_index_B,
efuse->cck_tx_power_index_B,
sizeof(efuse->cck_tx_power_index_B));
memcpy(priv->ht40_1s_tx_power_index_A,
efuse->ht40_1s_tx_power_index_A,
sizeof(efuse->ht40_1s_tx_power_index_A));
memcpy(priv->ht40_1s_tx_power_index_B,
efuse->ht40_1s_tx_power_index_B,
sizeof(efuse->ht40_1s_tx_power_index_B));
memcpy(priv->ht20_tx_power_index_diff,
efuse->ht20_tx_power_index_diff,
sizeof(efuse->ht20_tx_power_index_diff));
memcpy(priv->ofdm_tx_power_index_diff,
efuse->ofdm_tx_power_index_diff,
sizeof(efuse->ofdm_tx_power_index_diff));
memcpy(priv->ht40_max_power_offset,
efuse->ht40_max_power_offset,
sizeof(efuse->ht40_max_power_offset));
memcpy(priv->ht20_max_power_offset,
efuse->ht20_max_power_offset,
sizeof(efuse->ht20_max_power_offset));
if (priv->efuse_wifi.efuse8723.version >= 0x01) {
priv->has_xtalk = 1;
priv->xtalk = priv->efuse_wifi.efuse8723.xtal_k & 0x3f;
}
priv->power_base = &rtl8723a_power_base;
dev_info(&priv->udev->dev, "Vendor: %.7s\n",
efuse->vendor_name);
dev_info(&priv->udev->dev, "Product: %.41s\n",
efuse->device_name);
return 0;
}
static int rtl8723au_load_firmware(struct rtl8xxxu_priv *priv)
{
char *fw_name;
int ret;
switch (priv->chip_cut) {
case 0:
fw_name = "rtlwifi/rtl8723aufw_A.bin";
break;
case 1:
if (priv->enable_bluetooth)
fw_name = "rtlwifi/rtl8723aufw_B.bin";
else
fw_name = "rtlwifi/rtl8723aufw_B_NoBT.bin";
break;
default:
return -EINVAL;
}
ret = rtl8xxxu_load_firmware(priv, fw_name);
return ret;
}
static int rtl8723au_init_phy_rf(struct rtl8xxxu_priv *priv)
{
int ret;
ret = rtl8xxxu_init_phy_rf(priv, rtl8723au_radioa_1t_init_table, RF_A);
/* Reduce 80M spur */
rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, 0x0381808d);
rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83);
rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff82);
rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83);
return ret;
}
static int rtl8723a_emu_to_active(struct rtl8xxxu_priv *priv)
{
u8 val8;
u32 val32;
int count, ret = 0;
/* 0x20[0] = 1 enable LDOA12 MACRO block for all interface*/
val8 = rtl8xxxu_read8(priv, REG_LDOA15_CTRL);
val8 |= LDOA15_ENABLE;
rtl8xxxu_write8(priv, REG_LDOA15_CTRL, val8);
/* 0x67[0] = 0 to disable BT_GPS_SEL pins*/
val8 = rtl8xxxu_read8(priv, 0x0067);
val8 &= ~BIT(4);
rtl8xxxu_write8(priv, 0x0067, val8);
mdelay(1);
/* 0x00[5] = 0 release analog Ips to digital, 1:isolation */
val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL);
val8 &= ~SYS_ISO_ANALOG_IPS;
rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8);
/* disable SW LPS 0x04[10]= 0 */
val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
val8 &= ~BIT(2);
rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
/* wait till 0x04[17] = 1 power ready*/
for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
if (val32 & BIT(17))
break;
udelay(10);
}
if (!count) {
ret = -EBUSY;
goto exit;
}
/* We should be able to optimize the following three entries into one */
/* release WLON reset 0x04[16]= 1*/
val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 2);
val8 |= BIT(0);
rtl8xxxu_write8(priv, REG_APS_FSMCO + 2, val8);
/* disable HWPDN 0x04[15]= 0*/
val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
val8 &= ~BIT(7);
rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
/* disable WL suspend*/
val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
val8 &= ~(BIT(3) | BIT(4));
rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
/* set, then poll until 0 */
val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
val32 |= APS_FSMCO_MAC_ENABLE;
rtl8xxxu_write32(priv, REG_APS_FSMCO, val32);
for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
if ((val32 & APS_FSMCO_MAC_ENABLE) == 0) {
ret = 0;
break;
}
udelay(10);
}
if (!count) {
ret = -EBUSY;
goto exit;
}
/* 0x4C[23] = 0x4E[7] = 1, switch DPDT_SEL_P output from WL BB */
/*
* Note: Vendor driver actually clears this bit, despite the
* documentation claims it's being set!
*/
val8 = rtl8xxxu_read8(priv, REG_LEDCFG2);
val8 |= LEDCFG2_DPDT_SELECT;
val8 &= ~LEDCFG2_DPDT_SELECT;
rtl8xxxu_write8(priv, REG_LEDCFG2, val8);
exit:
return ret;
}
static int rtl8723au_power_on(struct rtl8xxxu_priv *priv)
{
u8 val8;
u16 val16;
u32 val32;
int ret;
/*
* RSV_CTRL 0x001C[7:0] = 0x00, unlock ISO/CLK/Power control register
*/
rtl8xxxu_write8(priv, REG_RSV_CTRL, 0x0);
rtl8xxxu_disabled_to_emu(priv);
ret = rtl8723a_emu_to_active(priv);
if (ret)
goto exit;
/*
* 0x0004[19] = 1, reset 8051
*/
val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 2);
val8 |= BIT(3);
rtl8xxxu_write8(priv, REG_APS_FSMCO + 2, val8);
/*
* Enable MAC DMA/WMAC/SCHEDULE/SEC block
* Set CR bit10 to enable 32k calibration.
*/
val16 = rtl8xxxu_read16(priv, REG_CR);
val16 |= (CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE |
CR_TXDMA_ENABLE | CR_RXDMA_ENABLE |
CR_PROTOCOL_ENABLE | CR_SCHEDULE_ENABLE |
CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE |
CR_SECURITY_ENABLE | CR_CALTIMER_ENABLE);
rtl8xxxu_write16(priv, REG_CR, val16);
/* For EFuse PG */
val32 = rtl8xxxu_read32(priv, REG_EFUSE_CTRL);
val32 &= ~(BIT(28) | BIT(29) | BIT(30));
val32 |= (0x06 << 28);
rtl8xxxu_write32(priv, REG_EFUSE_CTRL, val32);
exit:
return ret;
}
struct rtl8xxxu_fileops rtl8723au_fops = {
.parse_efuse = rtl8723au_parse_efuse,
.load_firmware = rtl8723au_load_firmware,
.power_on = rtl8723au_power_on,
.power_off = rtl8xxxu_power_off,
.reset_8051 = rtl8xxxu_reset_8051,
.llt_init = rtl8xxxu_init_llt_table,
.init_phy_bb = rtl8xxxu_gen1_init_phy_bb,
.init_phy_rf = rtl8723au_init_phy_rf,
.phy_iq_calibrate = rtl8xxxu_gen1_phy_iq_calibrate,
.config_channel = rtl8xxxu_gen1_config_channel,
.parse_rx_desc = rtl8xxxu_parse_rxdesc16,
.init_aggregation = rtl8xxxu_gen1_init_aggregation,
.enable_rf = rtl8xxxu_gen1_enable_rf,
.disable_rf = rtl8xxxu_gen1_disable_rf,
.usb_quirks = rtl8xxxu_gen1_usb_quirks,
.set_tx_power = rtl8xxxu_gen1_set_tx_power,
.update_rate_mask = rtl8xxxu_update_rate_mask,
.report_connect = rtl8xxxu_gen1_report_connect,
.fill_txdesc = rtl8xxxu_fill_txdesc_v1,
.writeN_block_size = 1024,
.rx_agg_buf_size = 16000,
.tx_desc_size = sizeof(struct rtl8xxxu_txdesc32),
.rx_desc_size = sizeof(struct rtl8xxxu_rxdesc16),
.adda_1t_init = 0x0b1b25a0,
.adda_1t_path_on = 0x0bdb25a0,
.adda_2t_path_on_a = 0x04db25a4,
.adda_2t_path_on_b = 0x0b1b25a4,
.trxff_boundary = 0x27ff,
.pbp_rx = PBP_PAGE_SIZE_128,
.pbp_tx = PBP_PAGE_SIZE_128,
.mactable = rtl8xxxu_gen1_mac_init_table,
.total_page_num = TX_TOTAL_PAGE_NUM,
.page_num_hi = TX_PAGE_NUM_HI_PQ,
.page_num_lo = TX_PAGE_NUM_LO_PQ,
.page_num_norm = TX_PAGE_NUM_NORM_PQ,
};
Reference in a new issue View git blame Copy permalink