mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-09-12 13:55:32 +00:00
Code Issues Releases Wiki Activity
linux-stable/drivers/ata
History
Tejun Heo 88ff6eafbb libata: implement ata_wait_after_reset() 
On certain device/controller combination, 0xff status is asserted
after reset and doesn't get cleared during 150ms post-reset wait.  As
0xff status is interpreted as no device (for good reasons), this can
lead to misdetection on such cases.

This patch implements ata_wait_after_reset() which replaces the 150ms
sleep and waits upto ATA_TMOUT_FF_WAIT if status is 0xff.
ATA_TMOUT_FF_WAIT is currently 800ms which is enough for
HHD424020F7SV00 to get detected but not enough for Quantum GoVault
drive which is known to take upto 2s.

Without parallel probing, spending 2s on 0xff port would incur too
much delay on ata_piix's which use 0xff to indicate empty port and
doesn't have SCR register, so GoVault needs to wait till parallel
probing.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-29 06:15:27 -04:00
..
ahci.c libata: implement ata_wait_after_reset() 2007-10-29 06:15:27 -04:00
ata_generic.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
ata_piix.c [libata] checkpatch-inspired cleanups 2007-10-23 20:59:42 -04:00
Kconfig Update libata driver for bf548 atapi controller against the 2.6.24 tree. 2007-10-17 20:49:02 -04:00
libata-acpi.c [libata] checkpatch-inspired cleanups 2007-10-23 20:59:42 -04:00
libata-core.c libata: implement ata_wait_after_reset() 2007-10-29 06:15:27 -04:00
libata-eh.c libata: track SLEEP state and issue SRST to wake it up 2007-10-29 06:15:25 -04:00
libata-pmp.c libata: use ata_exec_internal() for PMP register access 2007-10-12 14:55:47 -04:00
libata-scsi.c libata: relocate and fix post-command processing 2007-10-29 06:15:25 -04:00
libata-sff.c [libata] checkpatch-inspired cleanups 2007-10-23 20:59:42 -04:00
libata.h libata: add @timeout to ata_exec_internal[_sg]() 2007-10-12 14:55:47 -04:00
Makefile drivers/ata: add support to Freescale 3.0Gbps SATA Controller 2007-10-17 20:49:02 -04:00
pata_acpi.c pata_acpi: fix build breakage if !CONFIG_PM 2007-10-17 20:48:30 -04:00
pata_ali.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_amd.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_artop.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_at32.c AVR32 PATA driver 2007-10-12 14:55:37 -04:00
pata_atiixp.c pata_atiixp: Audit notes on locking 2007-10-12 14:55:42 -04:00
pata_bf54x.c Update libata driver for bf548 atapi controller against the 2.6.24 tree. 2007-10-17 20:49:02 -04:00
pata_cmd64x.c pata_cmd64x.c typo fix 2007-10-20 01:02:48 +02:00
pata_cmd640.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_cs5520.c [libata] struct pci_dev related cleanups 2007-10-12 14:55:47 -04:00
pata_cs5530.c Fix misspellings of "system", "controller", "interrupt" and "necessary". 2007-10-19 23:10:43 +02:00
pata_cs5535.c Fix misspellings of "system", "controller", "interrupt" and "necessary". 2007-10-19 23:10:43 +02:00
pata_cs5536.c pata_cs5536: MWDMA fix 2007-10-19 22:55:03 -04:00
pata_cypress.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_efar.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_hpt3x2n.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_hpt3x3.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
pata_hpt37x.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_hpt366.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_icside.c Fix pata_icside build for recent libata API changes 2007-10-25 02:05:26 -04:00
pata_isapnp.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
pata_it821x.c Fix misspellings of "system", "controller", "interrupt" and "necessary". 2007-10-19 23:10:43 +02:00
pata_it8213.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_ixp4xx_cf.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
pata_jmicron.c pata_jmicron: match vendor and class code only 2007-10-12 14:55:46 -04:00
pata_legacy.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
pata_marvell.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_mpc52xx.c mpc52xx-ata: fix compile warning (unused variable) 2007-10-14 08:57:30 -07:00
pata_mpiix.c Fix misspellings of "system", "controller", "interrupt" and "necessary". 2007-10-19 23:10:43 +02:00
pata_netcell.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_ns87410.c Fix misspellings of "system", "controller", "interrupt" and "necessary". 2007-10-19 23:10:43 +02:00
pata_ns87415.c [libata] checkpatch-inspired cleanups 2007-10-23 20:59:42 -04:00
pata_oldpiix.c Fix misspellings of "system", "controller", "interrupt" and "necessary". 2007-10-19 23:10:43 +02:00
pata_opti.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_optidma.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_pcmcia.c [libata] pata_pcmcia: Add additional id string (corsair, 1GB) 2007-10-15 15:51:42 -04:00
pata_pdc202xx_old.c pata_pdc202xx_old MWDMA fixes, and notes 2007-10-12 14:55:42 -04:00
pata_pdc2027x.c pdc2027x: Switch properly to ioread/iowrite 2007-10-12 14:55:38 -04:00
pata_platform.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
pata_qdi.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
pata_radisys.c Fix misspellings of "system", "controller", "interrupt" and "necessary". 2007-10-19 23:10:43 +02:00
pata_rz1000.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_sc1200.c Fix misspellings of "system", "controller", "interrupt" and "necessary". 2007-10-19 23:10:43 +02:00
pata_scc.c libata: implement ata_wait_after_reset() 2007-10-29 06:15:27 -04:00
pata_serverworks.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_sil680.c Fix misspellings of "system", "controller", "interrupt" and "necessary". 2007-10-19 23:10:43 +02:00
pata_sis.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_sl82c105.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_triflex.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_via.c Fix misspellings of "system", "controller", "interrupt" and "necessary". 2007-10-19 23:10:43 +02:00
pata_winbond.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
pdc_adma.c [libata] kill ata_sg_is_last() 2007-10-18 16:21:18 -04:00
sata_fsl.c drivers/ata: add support to Freescale 3.0Gbps SATA Controller 2007-10-17 20:49:02 -04:00
sata_inic162x.c libata: implement ata_wait_after_reset() 2007-10-29 06:15:27 -04:00
sata_mv.c [libata] checkpatch-inspired cleanups 2007-10-23 20:59:42 -04:00
sata_nv.c [libata] sata_nv: SWNCQ should not apply to MCP61 2007-10-25 02:14:17 -04:00
sata_promise.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
sata_promise.h Move libata to drivers/ata. 2006-08-10 07:31:37 -04:00
sata_qstor.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
sata_sil.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
sata_sil24.c [libata] kill ata_sg_is_last() 2007-10-18 16:21:18 -04:00
sata_sis.c [libata] sata_sis: use correct S/G table size 2007-10-19 22:56:44 -04:00
sata_svw.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
sata_sx4.c [libata] checkpatch-inspired cleanups 2007-10-23 20:59:42 -04:00
sata_uli.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
sata_via.c more trivial signedness fixes in drivers 2007-10-14 12:41:52 -07:00
sata_vsc.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
sis.h libata: PATA-mode fixes for sis_sata 2007-07-02 10:17:42 -04:00