linux-stable/include/linux/mtd/sh_flctl.h
Peter Huewe 1cd2620ca9 mtd/nand/sh_flctl: Move function mtd_to_flctl to fix build failure
This patch fixes a build failure[1] by simply moving the function mtd_to_flctl
beneath the definition of sh_flctl which it uses.

BF introduced by patch
'mtd/nand/sh_flctl: Replace the dangerous mtd_to_flctl macro' (67026418)

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-05-12 23:24:23 +01:00

131 lines
4.4 KiB
C

/*
* SuperH FLCTL nand controller
*
* Copyright © 2008 Renesas Solutions Corp.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef __SH_FLCTL_H__
#define __SH_FLCTL_H__
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
/* FLCTL registers */
#define FLCMNCR(f) (f->reg + 0x0)
#define FLCMDCR(f) (f->reg + 0x4)
#define FLCMCDR(f) (f->reg + 0x8)
#define FLADR(f) (f->reg + 0xC)
#define FLADR2(f) (f->reg + 0x3C)
#define FLDATAR(f) (f->reg + 0x10)
#define FLDTCNTR(f) (f->reg + 0x14)
#define FLINTDMACR(f) (f->reg + 0x18)
#define FLBSYTMR(f) (f->reg + 0x1C)
#define FLBSYCNT(f) (f->reg + 0x20)
#define FLDTFIFO(f) (f->reg + 0x24)
#define FLECFIFO(f) (f->reg + 0x28)
#define FLTRCR(f) (f->reg + 0x2C)
#define FL4ECCRESULT0(f) (f->reg + 0x80)
#define FL4ECCRESULT1(f) (f->reg + 0x84)
#define FL4ECCRESULT2(f) (f->reg + 0x88)
#define FL4ECCRESULT3(f) (f->reg + 0x8C)
#define FL4ECCCR(f) (f->reg + 0x90)
#define FL4ECCCNT(f) (f->reg + 0x94)
#define FLERRADR(f) (f->reg + 0x98)
/* FLCMNCR control bits */
#define ECCPOS2 (0x1 << 25)
#define _4ECCCNTEN (0x1 << 24)
#define _4ECCEN (0x1 << 23)
#define _4ECCCORRECT (0x1 << 22)
#define SHBUSSEL (0x1 << 20)
#define SEL_16BIT (0x1 << 19)
#define SNAND_E (0x1 << 18) /* SNAND (0=512 1=2048)*/
#define QTSEL_E (0x1 << 17)
#define ENDIAN (0x1 << 16) /* 1 = little endian */
#define FCKSEL_E (0x1 << 15)
#define ECCPOS_00 (0x00 << 12)
#define ECCPOS_01 (0x01 << 12)
#define ECCPOS_02 (0x02 << 12)
#define ACM_SACCES_MODE (0x01 << 10)
#define NANWF_E (0x1 << 9)
#define SE_D (0x1 << 8) /* Spare area disable */
#define CE1_ENABLE (0x1 << 4) /* Chip Enable 1 */
#define CE0_ENABLE (0x1 << 3) /* Chip Enable 0 */
#define TYPESEL_SET (0x1 << 0)
/* FLCMDCR control bits */
#define ADRCNT2_E (0x1 << 31) /* 5byte address enable */
#define ADRMD_E (0x1 << 26) /* Sector address access */
#define CDSRC_E (0x1 << 25) /* Data buffer selection */
#define DOSR_E (0x1 << 24) /* Status read check */
#define SELRW (0x1 << 21) /* 0:read 1:write */
#define DOADR_E (0x1 << 20) /* Address stage execute */
#define ADRCNT_1 (0x00 << 18) /* Address data bytes: 1byte */
#define ADRCNT_2 (0x01 << 18) /* Address data bytes: 2byte */
#define ADRCNT_3 (0x02 << 18) /* Address data bytes: 3byte */
#define ADRCNT_4 (0x03 << 18) /* Address data bytes: 4byte */
#define DOCMD2_E (0x1 << 17) /* 2nd cmd stage execute */
#define DOCMD1_E (0x1 << 16) /* 1st cmd stage execute */
/* FLTRCR control bits */
#define TRSTRT (0x1 << 0) /* translation start */
#define TREND (0x1 << 1) /* translation end */
/* FL4ECCCR control bits */
#define _4ECCFA (0x1 << 2) /* 4 symbols correct fault */
#define _4ECCEND (0x1 << 1) /* 4 symbols end */
#define _4ECCEXST (0x1 << 0) /* 4 symbols exist */
#define INIT_FL4ECCRESULT_VAL 0x03FF03FF
#define LOOP_TIMEOUT_MAX 0x00010000
struct sh_flctl {
struct mtd_info mtd;
struct nand_chip chip;
struct platform_device *pdev;
void __iomem *reg;
uint8_t done_buff[2048 + 64]; /* max size 2048 + 64 */
int read_bytes;
int index;
int seqin_column; /* column in SEQIN cmd */
int seqin_page_addr; /* page_addr in SEQIN cmd */
uint32_t seqin_read_cmd; /* read cmd in SEQIN cmd */
int erase1_page_addr; /* page_addr in ERASE1 cmd */
uint32_t erase_ADRCNT; /* bits of FLCMDCR in ERASE1 cmd */
uint32_t rw_ADRCNT; /* bits of FLCMDCR in READ WRITE cmd */
int hwecc_cant_correct[4];
unsigned page_size:1; /* NAND page size (0 = 512, 1 = 2048) */
unsigned hwecc:1; /* Hardware ECC (0 = disabled, 1 = enabled) */
};
struct sh_flctl_platform_data {
struct mtd_partition *parts;
int nr_parts;
unsigned long flcmncr_val;
unsigned has_hwecc:1;
};
static inline struct sh_flctl *mtd_to_flctl(struct mtd_info *mtdinfo)
{
return container_of(mtdinfo, struct sh_flctl, mtd);
}
#endif /* __SH_FLCTL_H__ */