mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 19:00:25 +00:00
![Jeff LaBundy](/assets/img/avatar_default.png)
After a reset event, the device automatically triggers ATI at the default core clock frequency (16 MHz). Soon afterward, the driver loads firmware which may attempt to lower the frequency. If this initial ATI cycle is still in progress when the frequency is changed, however, the device incorrectly reports channels 0, 1 and 2 to be in a state of touch once ATI finally completes. To solve this problem, wait until ATI is complete before lowering the frequency. Because this particular ATI cycle occurs following a reset event, its duration is predictable and a simple delay can suffice. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
1081 lines
26 KiB
C
1081 lines
26 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Azoteq IQS620A/621/622/624/625 Multi-Function Sensors
|
|
*
|
|
* Copyright (C) 2019 Jeff LaBundy <jeff@labundy.com>
|
|
*
|
|
* These devices rely on application-specific register settings and calibration
|
|
* data developed in and exported from a suite of GUIs offered by the vendor. A
|
|
* separate tool converts the GUIs' ASCII-based output into a standard firmware
|
|
* file parsed by the driver.
|
|
*
|
|
* Link to datasheets and GUIs: https://www.azoteq.com/
|
|
*
|
|
* Link to conversion tool: https://github.com/jlabundy/iqs62x-h2bin.git
|
|
*/
|
|
|
|
#include <linux/completion.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/list.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/mfd/iqs62x.h>
|
|
#include <linux/module.h>
|
|
#include <linux/notifier.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/property.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/slab.h>
|
|
#include <asm/unaligned.h>
|
|
|
|
#define IQS62X_PROD_NUM 0x00
|
|
|
|
#define IQS62X_SYS_FLAGS 0x10
|
|
|
|
#define IQS620_HALL_FLAGS 0x16
|
|
#define IQS621_HALL_FLAGS 0x19
|
|
#define IQS622_HALL_FLAGS IQS621_HALL_FLAGS
|
|
|
|
#define IQS624_INTERVAL_NUM 0x18
|
|
#define IQS625_INTERVAL_NUM 0x12
|
|
|
|
#define IQS622_PROX_SETTINGS_4 0x48
|
|
#define IQS620_PROX_SETTINGS_4 0x50
|
|
#define IQS620_PROX_SETTINGS_4_SAR_EN BIT(7)
|
|
|
|
#define IQS621_ALS_CAL_DIV_LUX 0x82
|
|
#define IQS621_ALS_CAL_DIV_IR 0x83
|
|
|
|
#define IQS620_TEMP_CAL_MULT 0xC2
|
|
#define IQS620_TEMP_CAL_DIV 0xC3
|
|
#define IQS620_TEMP_CAL_OFFS 0xC4
|
|
|
|
#define IQS62X_SYS_SETTINGS 0xD0
|
|
#define IQS62X_SYS_SETTINGS_ACK_RESET BIT(6)
|
|
#define IQS62X_SYS_SETTINGS_EVENT_MODE BIT(5)
|
|
#define IQS62X_SYS_SETTINGS_CLK_DIV BIT(4)
|
|
#define IQS62X_SYS_SETTINGS_COMM_ATI BIT(3)
|
|
#define IQS62X_SYS_SETTINGS_REDO_ATI BIT(1)
|
|
|
|
#define IQS62X_PWR_SETTINGS 0xD2
|
|
#define IQS62X_PWR_SETTINGS_DIS_AUTO BIT(5)
|
|
#define IQS62X_PWR_SETTINGS_PWR_MODE_MASK (BIT(4) | BIT(3))
|
|
#define IQS62X_PWR_SETTINGS_PWR_MODE_HALT (BIT(4) | BIT(3))
|
|
#define IQS62X_PWR_SETTINGS_PWR_MODE_NORM 0
|
|
|
|
#define IQS62X_OTP_CMD 0xF0
|
|
#define IQS62X_OTP_CMD_FG3 0x13
|
|
#define IQS62X_OTP_DATA 0xF1
|
|
#define IQS62X_MAX_REG 0xFF
|
|
|
|
#define IQS62X_HALL_CAL_MASK GENMASK(3, 0)
|
|
|
|
#define IQS62X_FW_REC_TYPE_INFO 0
|
|
#define IQS62X_FW_REC_TYPE_PROD 1
|
|
#define IQS62X_FW_REC_TYPE_HALL 2
|
|
#define IQS62X_FW_REC_TYPE_MASK 3
|
|
#define IQS62X_FW_REC_TYPE_DATA 4
|
|
|
|
#define IQS62X_ATI_STARTUP_MS 350
|
|
#define IQS62X_FILT_SETTLE_MS 250
|
|
|
|
struct iqs62x_fw_rec {
|
|
u8 type;
|
|
u8 addr;
|
|
u8 len;
|
|
u8 data;
|
|
} __packed;
|
|
|
|
struct iqs62x_fw_blk {
|
|
struct list_head list;
|
|
u8 addr;
|
|
u8 mask;
|
|
u8 len;
|
|
u8 data[];
|
|
};
|
|
|
|
struct iqs62x_info {
|
|
u8 prod_num;
|
|
u8 sw_num;
|
|
u8 hw_num;
|
|
} __packed;
|
|
|
|
static int iqs62x_dev_init(struct iqs62x_core *iqs62x)
|
|
{
|
|
struct iqs62x_fw_blk *fw_blk;
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
list_for_each_entry(fw_blk, &iqs62x->fw_blk_head, list) {
|
|
/*
|
|
* In case ATI is in progress, wait for it to complete before
|
|
* lowering the core clock frequency.
|
|
*/
|
|
if (fw_blk->addr == IQS62X_SYS_SETTINGS &&
|
|
*fw_blk->data & IQS62X_SYS_SETTINGS_CLK_DIV)
|
|
msleep(IQS62X_ATI_STARTUP_MS);
|
|
|
|
if (fw_blk->mask)
|
|
ret = regmap_update_bits(iqs62x->regmap, fw_blk->addr,
|
|
fw_blk->mask, *fw_blk->data);
|
|
else
|
|
ret = regmap_raw_write(iqs62x->regmap, fw_blk->addr,
|
|
fw_blk->data, fw_blk->len);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
switch (iqs62x->dev_desc->prod_num) {
|
|
case IQS620_PROD_NUM:
|
|
case IQS622_PROD_NUM:
|
|
ret = regmap_read(iqs62x->regmap,
|
|
iqs62x->dev_desc->prox_settings, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (val & IQS620_PROX_SETTINGS_4_SAR_EN)
|
|
iqs62x->ui_sel = IQS62X_UI_SAR1;
|
|
fallthrough;
|
|
|
|
case IQS621_PROD_NUM:
|
|
ret = regmap_write(iqs62x->regmap, IQS620_GLBL_EVENT_MASK,
|
|
IQS620_GLBL_EVENT_MASK_PMU |
|
|
iqs62x->dev_desc->prox_mask |
|
|
iqs62x->dev_desc->sar_mask |
|
|
iqs62x->dev_desc->hall_mask |
|
|
iqs62x->dev_desc->hyst_mask |
|
|
iqs62x->dev_desc->temp_mask |
|
|
iqs62x->dev_desc->als_mask |
|
|
iqs62x->dev_desc->ir_mask);
|
|
if (ret)
|
|
return ret;
|
|
break;
|
|
|
|
default:
|
|
ret = regmap_write(iqs62x->regmap, IQS624_HALL_UI,
|
|
IQS624_HALL_UI_WHL_EVENT |
|
|
IQS624_HALL_UI_INT_EVENT |
|
|
IQS624_HALL_UI_AUTO_CAL);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* The IQS625 default interval divider is below the minimum
|
|
* permissible value, and the datasheet mandates that it is
|
|
* corrected during initialization (unless an updated value
|
|
* has already been provided by firmware).
|
|
*
|
|
* To protect against an unacceptably low user-entered value
|
|
* stored in the firmware, the same check is extended to the
|
|
* IQS624 as well.
|
|
*/
|
|
ret = regmap_read(iqs62x->regmap, IQS624_INTERVAL_DIV, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (val >= iqs62x->dev_desc->interval_div)
|
|
break;
|
|
|
|
ret = regmap_write(iqs62x->regmap, IQS624_INTERVAL_DIV,
|
|
iqs62x->dev_desc->interval_div);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Place the device in streaming mode at first so as not to miss the
|
|
* limited number of interrupts that would otherwise occur after ATI
|
|
* completes. The device is subsequently placed in event mode by the
|
|
* interrupt handler.
|
|
*
|
|
* In the meantime, mask interrupts during ATI to prevent the device
|
|
* from soliciting I2C traffic until the noise-sensitive ATI process
|
|
* is complete.
|
|
*/
|
|
ret = regmap_update_bits(iqs62x->regmap, IQS62X_SYS_SETTINGS,
|
|
IQS62X_SYS_SETTINGS_ACK_RESET |
|
|
IQS62X_SYS_SETTINGS_EVENT_MODE |
|
|
IQS62X_SYS_SETTINGS_COMM_ATI |
|
|
IQS62X_SYS_SETTINGS_REDO_ATI,
|
|
IQS62X_SYS_SETTINGS_ACK_RESET |
|
|
IQS62X_SYS_SETTINGS_REDO_ATI);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* The following delay gives the device time to deassert its RDY output
|
|
* in case a communication window was open while the REDO_ATI field was
|
|
* written. This prevents an interrupt from being serviced prematurely.
|
|
*/
|
|
usleep_range(5000, 5100);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int iqs62x_firmware_parse(struct iqs62x_core *iqs62x,
|
|
const struct firmware *fw)
|
|
{
|
|
struct i2c_client *client = iqs62x->client;
|
|
struct iqs62x_fw_rec *fw_rec;
|
|
struct iqs62x_fw_blk *fw_blk;
|
|
unsigned int val;
|
|
size_t pos = 0;
|
|
int ret = 0;
|
|
u8 mask, len, *data;
|
|
u8 hall_cal_index = 0;
|
|
|
|
while (pos < fw->size) {
|
|
if (pos + sizeof(*fw_rec) > fw->size) {
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
fw_rec = (struct iqs62x_fw_rec *)(fw->data + pos);
|
|
pos += sizeof(*fw_rec);
|
|
|
|
if (pos + fw_rec->len - 1 > fw->size) {
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
pos += fw_rec->len - 1;
|
|
|
|
switch (fw_rec->type) {
|
|
case IQS62X_FW_REC_TYPE_INFO:
|
|
continue;
|
|
|
|
case IQS62X_FW_REC_TYPE_PROD:
|
|
if (fw_rec->data == iqs62x->dev_desc->prod_num)
|
|
continue;
|
|
|
|
dev_err(&client->dev,
|
|
"Incompatible product number: 0x%02X\n",
|
|
fw_rec->data);
|
|
ret = -EINVAL;
|
|
break;
|
|
|
|
case IQS62X_FW_REC_TYPE_HALL:
|
|
if (!hall_cal_index) {
|
|
ret = regmap_write(iqs62x->regmap,
|
|
IQS62X_OTP_CMD,
|
|
IQS62X_OTP_CMD_FG3);
|
|
if (ret)
|
|
break;
|
|
|
|
ret = regmap_read(iqs62x->regmap,
|
|
IQS62X_OTP_DATA, &val);
|
|
if (ret)
|
|
break;
|
|
|
|
hall_cal_index = val & IQS62X_HALL_CAL_MASK;
|
|
if (!hall_cal_index) {
|
|
dev_err(&client->dev,
|
|
"Uncalibrated device\n");
|
|
ret = -ENODATA;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (hall_cal_index > fw_rec->len) {
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
mask = 0;
|
|
data = &fw_rec->data + hall_cal_index - 1;
|
|
len = sizeof(*data);
|
|
break;
|
|
|
|
case IQS62X_FW_REC_TYPE_MASK:
|
|
if (fw_rec->len < (sizeof(mask) + sizeof(*data))) {
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
mask = fw_rec->data;
|
|
data = &fw_rec->data + sizeof(mask);
|
|
len = sizeof(*data);
|
|
break;
|
|
|
|
case IQS62X_FW_REC_TYPE_DATA:
|
|
mask = 0;
|
|
data = &fw_rec->data;
|
|
len = fw_rec->len;
|
|
break;
|
|
|
|
default:
|
|
dev_err(&client->dev,
|
|
"Unrecognized record type: 0x%02X\n",
|
|
fw_rec->type);
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
if (ret)
|
|
break;
|
|
|
|
fw_blk = devm_kzalloc(&client->dev,
|
|
struct_size(fw_blk, data, len),
|
|
GFP_KERNEL);
|
|
if (!fw_blk) {
|
|
ret = -ENOMEM;
|
|
break;
|
|
}
|
|
|
|
fw_blk->addr = fw_rec->addr;
|
|
fw_blk->mask = mask;
|
|
fw_blk->len = len;
|
|
memcpy(fw_blk->data, data, len);
|
|
|
|
list_add(&fw_blk->list, &iqs62x->fw_blk_head);
|
|
}
|
|
|
|
release_firmware(fw);
|
|
|
|
return ret;
|
|
}
|
|
|
|
const struct iqs62x_event_desc iqs62x_events[IQS62X_NUM_EVENTS] = {
|
|
[IQS62X_EVENT_PROX_CH0_T] = {
|
|
.reg = IQS62X_EVENT_PROX,
|
|
.mask = BIT(4),
|
|
.val = BIT(4),
|
|
},
|
|
[IQS62X_EVENT_PROX_CH0_P] = {
|
|
.reg = IQS62X_EVENT_PROX,
|
|
.mask = BIT(0),
|
|
.val = BIT(0),
|
|
},
|
|
[IQS62X_EVENT_PROX_CH1_T] = {
|
|
.reg = IQS62X_EVENT_PROX,
|
|
.mask = BIT(5),
|
|
.val = BIT(5),
|
|
},
|
|
[IQS62X_EVENT_PROX_CH1_P] = {
|
|
.reg = IQS62X_EVENT_PROX,
|
|
.mask = BIT(1),
|
|
.val = BIT(1),
|
|
},
|
|
[IQS62X_EVENT_PROX_CH2_T] = {
|
|
.reg = IQS62X_EVENT_PROX,
|
|
.mask = BIT(6),
|
|
.val = BIT(6),
|
|
},
|
|
[IQS62X_EVENT_PROX_CH2_P] = {
|
|
.reg = IQS62X_EVENT_PROX,
|
|
.mask = BIT(2),
|
|
.val = BIT(2),
|
|
},
|
|
[IQS62X_EVENT_HYST_POS_T] = {
|
|
.reg = IQS62X_EVENT_HYST,
|
|
.mask = BIT(6) | BIT(7),
|
|
.val = BIT(6),
|
|
},
|
|
[IQS62X_EVENT_HYST_POS_P] = {
|
|
.reg = IQS62X_EVENT_HYST,
|
|
.mask = BIT(5) | BIT(7),
|
|
.val = BIT(5),
|
|
},
|
|
[IQS62X_EVENT_HYST_NEG_T] = {
|
|
.reg = IQS62X_EVENT_HYST,
|
|
.mask = BIT(6) | BIT(7),
|
|
.val = BIT(6) | BIT(7),
|
|
},
|
|
[IQS62X_EVENT_HYST_NEG_P] = {
|
|
.reg = IQS62X_EVENT_HYST,
|
|
.mask = BIT(5) | BIT(7),
|
|
.val = BIT(5) | BIT(7),
|
|
},
|
|
[IQS62X_EVENT_SAR1_ACT] = {
|
|
.reg = IQS62X_EVENT_HYST,
|
|
.mask = BIT(4),
|
|
.val = BIT(4),
|
|
},
|
|
[IQS62X_EVENT_SAR1_QRD] = {
|
|
.reg = IQS62X_EVENT_HYST,
|
|
.mask = BIT(2),
|
|
.val = BIT(2),
|
|
},
|
|
[IQS62X_EVENT_SAR1_MOVE] = {
|
|
.reg = IQS62X_EVENT_HYST,
|
|
.mask = BIT(1),
|
|
.val = BIT(1),
|
|
},
|
|
[IQS62X_EVENT_SAR1_HALT] = {
|
|
.reg = IQS62X_EVENT_HYST,
|
|
.mask = BIT(0),
|
|
.val = BIT(0),
|
|
},
|
|
[IQS62X_EVENT_WHEEL_UP] = {
|
|
.reg = IQS62X_EVENT_WHEEL,
|
|
.mask = BIT(7) | BIT(6),
|
|
.val = BIT(7),
|
|
},
|
|
[IQS62X_EVENT_WHEEL_DN] = {
|
|
.reg = IQS62X_EVENT_WHEEL,
|
|
.mask = BIT(7) | BIT(6),
|
|
.val = BIT(7) | BIT(6),
|
|
},
|
|
[IQS62X_EVENT_HALL_N_T] = {
|
|
.reg = IQS62X_EVENT_HALL,
|
|
.mask = BIT(2) | BIT(0),
|
|
.val = BIT(2),
|
|
},
|
|
[IQS62X_EVENT_HALL_N_P] = {
|
|
.reg = IQS62X_EVENT_HALL,
|
|
.mask = BIT(1) | BIT(0),
|
|
.val = BIT(1),
|
|
},
|
|
[IQS62X_EVENT_HALL_S_T] = {
|
|
.reg = IQS62X_EVENT_HALL,
|
|
.mask = BIT(2) | BIT(0),
|
|
.val = BIT(2) | BIT(0),
|
|
},
|
|
[IQS62X_EVENT_HALL_S_P] = {
|
|
.reg = IQS62X_EVENT_HALL,
|
|
.mask = BIT(1) | BIT(0),
|
|
.val = BIT(1) | BIT(0),
|
|
},
|
|
[IQS62X_EVENT_SYS_RESET] = {
|
|
.reg = IQS62X_EVENT_SYS,
|
|
.mask = BIT(7),
|
|
.val = BIT(7),
|
|
},
|
|
[IQS62X_EVENT_SYS_ATI] = {
|
|
.reg = IQS62X_EVENT_SYS,
|
|
.mask = BIT(2),
|
|
.val = BIT(2),
|
|
},
|
|
};
|
|
EXPORT_SYMBOL_GPL(iqs62x_events);
|
|
|
|
static irqreturn_t iqs62x_irq(int irq, void *context)
|
|
{
|
|
struct iqs62x_core *iqs62x = context;
|
|
struct i2c_client *client = iqs62x->client;
|
|
struct iqs62x_event_data event_data;
|
|
struct iqs62x_event_desc event_desc;
|
|
enum iqs62x_event_reg event_reg;
|
|
unsigned long event_flags = 0;
|
|
int ret, i, j;
|
|
u8 event_map[IQS62X_EVENT_SIZE];
|
|
|
|
/*
|
|
* The device asserts the RDY output to signal the beginning of a
|
|
* communication window, which is closed by an I2C stop condition.
|
|
* As such, all interrupt status is captured in a single read and
|
|
* broadcast to any interested sub-device drivers.
|
|
*/
|
|
ret = regmap_raw_read(iqs62x->regmap, IQS62X_SYS_FLAGS, event_map,
|
|
sizeof(event_map));
|
|
if (ret) {
|
|
dev_err(&client->dev, "Failed to read device status: %d\n",
|
|
ret);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
for (i = 0; i < sizeof(event_map); i++) {
|
|
event_reg = iqs62x->dev_desc->event_regs[iqs62x->ui_sel][i];
|
|
|
|
switch (event_reg) {
|
|
case IQS62X_EVENT_UI_LO:
|
|
event_data.ui_data = get_unaligned_le16(&event_map[i]);
|
|
fallthrough;
|
|
|
|
case IQS62X_EVENT_UI_HI:
|
|
case IQS62X_EVENT_NONE:
|
|
continue;
|
|
|
|
case IQS62X_EVENT_ALS:
|
|
event_data.als_flags = event_map[i];
|
|
continue;
|
|
|
|
case IQS62X_EVENT_IR:
|
|
event_data.ir_flags = event_map[i];
|
|
continue;
|
|
|
|
case IQS62X_EVENT_INTER:
|
|
event_data.interval = event_map[i];
|
|
continue;
|
|
|
|
case IQS62X_EVENT_HYST:
|
|
event_map[i] <<= iqs62x->dev_desc->hyst_shift;
|
|
fallthrough;
|
|
|
|
case IQS62X_EVENT_WHEEL:
|
|
case IQS62X_EVENT_HALL:
|
|
case IQS62X_EVENT_PROX:
|
|
case IQS62X_EVENT_SYS:
|
|
break;
|
|
}
|
|
|
|
for (j = 0; j < IQS62X_NUM_EVENTS; j++) {
|
|
event_desc = iqs62x_events[j];
|
|
|
|
if (event_desc.reg != event_reg)
|
|
continue;
|
|
|
|
if ((event_map[i] & event_desc.mask) == event_desc.val)
|
|
event_flags |= BIT(j);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* The device resets itself in response to the I2C master stalling
|
|
* communication past a fixed timeout. In this case, all registers
|
|
* are restored and any interested sub-device drivers are notified.
|
|
*/
|
|
if (event_flags & BIT(IQS62X_EVENT_SYS_RESET)) {
|
|
dev_err(&client->dev, "Unexpected device reset\n");
|
|
|
|
ret = iqs62x_dev_init(iqs62x);
|
|
if (ret) {
|
|
dev_err(&client->dev,
|
|
"Failed to re-initialize device: %d\n", ret);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
iqs62x->event_cache |= BIT(IQS62X_EVENT_SYS_RESET);
|
|
reinit_completion(&iqs62x->ati_done);
|
|
} else if (event_flags & BIT(IQS62X_EVENT_SYS_ATI)) {
|
|
iqs62x->event_cache |= BIT(IQS62X_EVENT_SYS_ATI);
|
|
reinit_completion(&iqs62x->ati_done);
|
|
} else if (!completion_done(&iqs62x->ati_done)) {
|
|
ret = regmap_update_bits(iqs62x->regmap, IQS62X_SYS_SETTINGS,
|
|
IQS62X_SYS_SETTINGS_EVENT_MODE, 0xFF);
|
|
if (ret) {
|
|
dev_err(&client->dev,
|
|
"Failed to enable event mode: %d\n", ret);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
msleep(IQS62X_FILT_SETTLE_MS);
|
|
complete_all(&iqs62x->ati_done);
|
|
}
|
|
|
|
/*
|
|
* Reset and ATI events are not broadcast to the sub-device drivers
|
|
* until ATI has completed. Any other events that may have occurred
|
|
* during ATI are ignored.
|
|
*/
|
|
if (completion_done(&iqs62x->ati_done)) {
|
|
event_flags |= iqs62x->event_cache;
|
|
ret = blocking_notifier_call_chain(&iqs62x->nh, event_flags,
|
|
&event_data);
|
|
if (ret & NOTIFY_STOP_MASK)
|
|
return IRQ_NONE;
|
|
|
|
iqs62x->event_cache = 0;
|
|
}
|
|
|
|
/*
|
|
* Once the communication window is closed, a small delay is added to
|
|
* ensure the device's RDY output has been deasserted by the time the
|
|
* interrupt handler returns.
|
|
*/
|
|
usleep_range(150, 200);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void iqs62x_firmware_load(const struct firmware *fw, void *context)
|
|
{
|
|
struct iqs62x_core *iqs62x = context;
|
|
struct i2c_client *client = iqs62x->client;
|
|
int ret;
|
|
|
|
if (fw) {
|
|
ret = iqs62x_firmware_parse(iqs62x, fw);
|
|
if (ret) {
|
|
dev_err(&client->dev, "Failed to parse firmware: %d\n",
|
|
ret);
|
|
goto err_out;
|
|
}
|
|
}
|
|
|
|
ret = iqs62x_dev_init(iqs62x);
|
|
if (ret) {
|
|
dev_err(&client->dev, "Failed to initialize device: %d\n", ret);
|
|
goto err_out;
|
|
}
|
|
|
|
ret = devm_request_threaded_irq(&client->dev, client->irq,
|
|
NULL, iqs62x_irq, IRQF_ONESHOT,
|
|
client->name, iqs62x);
|
|
if (ret) {
|
|
dev_err(&client->dev, "Failed to request IRQ: %d\n", ret);
|
|
goto err_out;
|
|
}
|
|
|
|
if (!wait_for_completion_timeout(&iqs62x->ati_done,
|
|
msecs_to_jiffies(2000))) {
|
|
dev_err(&client->dev, "Failed to complete ATI\n");
|
|
goto err_out;
|
|
}
|
|
|
|
ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE,
|
|
iqs62x->dev_desc->sub_devs,
|
|
iqs62x->dev_desc->num_sub_devs,
|
|
NULL, 0, NULL);
|
|
if (ret)
|
|
dev_err(&client->dev, "Failed to add sub-devices: %d\n", ret);
|
|
|
|
err_out:
|
|
complete_all(&iqs62x->fw_done);
|
|
}
|
|
|
|
static const struct mfd_cell iqs620at_sub_devs[] = {
|
|
{
|
|
.name = "iqs62x-keys",
|
|
.of_compatible = "azoteq,iqs620a-keys",
|
|
},
|
|
{
|
|
.name = "iqs620a-pwm",
|
|
.of_compatible = "azoteq,iqs620a-pwm",
|
|
},
|
|
{ .name = "iqs620at-temp", },
|
|
};
|
|
|
|
static const struct mfd_cell iqs620a_sub_devs[] = {
|
|
{
|
|
.name = "iqs62x-keys",
|
|
.of_compatible = "azoteq,iqs620a-keys",
|
|
},
|
|
{
|
|
.name = "iqs620a-pwm",
|
|
.of_compatible = "azoteq,iqs620a-pwm",
|
|
},
|
|
};
|
|
|
|
static const struct mfd_cell iqs621_sub_devs[] = {
|
|
{
|
|
.name = "iqs62x-keys",
|
|
.of_compatible = "azoteq,iqs621-keys",
|
|
},
|
|
{ .name = "iqs621-als", },
|
|
};
|
|
|
|
static const struct mfd_cell iqs622_sub_devs[] = {
|
|
{
|
|
.name = "iqs62x-keys",
|
|
.of_compatible = "azoteq,iqs622-keys",
|
|
},
|
|
{ .name = "iqs621-als", },
|
|
};
|
|
|
|
static const struct mfd_cell iqs624_sub_devs[] = {
|
|
{
|
|
.name = "iqs62x-keys",
|
|
.of_compatible = "azoteq,iqs624-keys",
|
|
},
|
|
{ .name = "iqs624-pos", },
|
|
};
|
|
|
|
static const struct mfd_cell iqs625_sub_devs[] = {
|
|
{
|
|
.name = "iqs62x-keys",
|
|
.of_compatible = "azoteq,iqs625-keys",
|
|
},
|
|
{ .name = "iqs624-pos", },
|
|
};
|
|
|
|
static const u8 iqs620at_cal_regs[] = {
|
|
IQS620_TEMP_CAL_MULT,
|
|
IQS620_TEMP_CAL_DIV,
|
|
IQS620_TEMP_CAL_OFFS,
|
|
};
|
|
|
|
static const u8 iqs621_cal_regs[] = {
|
|
IQS621_ALS_CAL_DIV_LUX,
|
|
IQS621_ALS_CAL_DIV_IR,
|
|
};
|
|
|
|
static const enum iqs62x_event_reg iqs620a_event_regs[][IQS62X_EVENT_SIZE] = {
|
|
[IQS62X_UI_PROX] = {
|
|
IQS62X_EVENT_SYS, /* 0x10 */
|
|
IQS62X_EVENT_NONE,
|
|
IQS62X_EVENT_PROX, /* 0x12 */
|
|
IQS62X_EVENT_HYST, /* 0x13 */
|
|
IQS62X_EVENT_NONE,
|
|
IQS62X_EVENT_NONE,
|
|
IQS62X_EVENT_HALL, /* 0x16 */
|
|
IQS62X_EVENT_NONE,
|
|
IQS62X_EVENT_NONE,
|
|
IQS62X_EVENT_NONE,
|
|
},
|
|
[IQS62X_UI_SAR1] = {
|
|
IQS62X_EVENT_SYS, /* 0x10 */
|
|
IQS62X_EVENT_NONE,
|
|
IQS62X_EVENT_NONE,
|
|
IQS62X_EVENT_HYST, /* 0x13 */
|
|
IQS62X_EVENT_NONE,
|
|
IQS62X_EVENT_NONE,
|
|
IQS62X_EVENT_HALL, /* 0x16 */
|
|
IQS62X_EVENT_NONE,
|
|
IQS62X_EVENT_NONE,
|
|
IQS62X_EVENT_NONE,
|
|
},
|
|
};
|
|
|
|
static const enum iqs62x_event_reg iqs621_event_regs[][IQS62X_EVENT_SIZE] = {
|
|
[IQS62X_UI_PROX] = {
|
|
IQS62X_EVENT_SYS, /* 0x10 */
|
|
IQS62X_EVENT_NONE,
|
|
IQS62X_EVENT_PROX, /* 0x12 */
|
|
IQS62X_EVENT_HYST, /* 0x13 */
|
|
IQS62X_EVENT_NONE,
|
|
IQS62X_EVENT_NONE,
|
|
IQS62X_EVENT_ALS, /* 0x16 */
|
|
IQS62X_EVENT_UI_LO, /* 0x17 */
|
|
IQS62X_EVENT_UI_HI, /* 0x18 */
|
|
IQS62X_EVENT_HALL, /* 0x19 */
|
|
},
|
|
};
|
|
|
|
static const enum iqs62x_event_reg iqs622_event_regs[][IQS62X_EVENT_SIZE] = {
|
|
[IQS62X_UI_PROX] = {
|
|
IQS62X_EVENT_SYS, /* 0x10 */
|
|
IQS62X_EVENT_NONE,
|
|
IQS62X_EVENT_PROX, /* 0x12 */
|
|
IQS62X_EVENT_NONE,
|
|
IQS62X_EVENT_ALS, /* 0x14 */
|
|
IQS62X_EVENT_NONE,
|
|
IQS62X_EVENT_IR, /* 0x16 */
|
|
IQS62X_EVENT_UI_LO, /* 0x17 */
|
|
IQS62X_EVENT_UI_HI, /* 0x18 */
|
|
IQS62X_EVENT_HALL, /* 0x19 */
|
|
},
|
|
[IQS62X_UI_SAR1] = {
|
|
IQS62X_EVENT_SYS, /* 0x10 */
|
|
IQS62X_EVENT_NONE,
|
|
IQS62X_EVENT_NONE,
|
|
IQS62X_EVENT_HYST, /* 0x13 */
|
|
IQS62X_EVENT_ALS, /* 0x14 */
|
|
IQS62X_EVENT_NONE,
|
|
IQS62X_EVENT_IR, /* 0x16 */
|
|
IQS62X_EVENT_UI_LO, /* 0x17 */
|
|
IQS62X_EVENT_UI_HI, /* 0x18 */
|
|
IQS62X_EVENT_HALL, /* 0x19 */
|
|
},
|
|
};
|
|
|
|
static const enum iqs62x_event_reg iqs624_event_regs[][IQS62X_EVENT_SIZE] = {
|
|
[IQS62X_UI_PROX] = {
|
|
IQS62X_EVENT_SYS, /* 0x10 */
|
|
IQS62X_EVENT_NONE,
|
|
IQS62X_EVENT_PROX, /* 0x12 */
|
|
IQS62X_EVENT_NONE,
|
|
IQS62X_EVENT_WHEEL, /* 0x14 */
|
|
IQS62X_EVENT_NONE,
|
|
IQS62X_EVENT_UI_LO, /* 0x16 */
|
|
IQS62X_EVENT_UI_HI, /* 0x17 */
|
|
IQS62X_EVENT_INTER, /* 0x18 */
|
|
IQS62X_EVENT_NONE,
|
|
},
|
|
};
|
|
|
|
static const enum iqs62x_event_reg iqs625_event_regs[][IQS62X_EVENT_SIZE] = {
|
|
[IQS62X_UI_PROX] = {
|
|
IQS62X_EVENT_SYS, /* 0x10 */
|
|
IQS62X_EVENT_PROX, /* 0x11 */
|
|
IQS62X_EVENT_INTER, /* 0x12 */
|
|
IQS62X_EVENT_NONE,
|
|
IQS62X_EVENT_NONE,
|
|
IQS62X_EVENT_NONE,
|
|
IQS62X_EVENT_NONE,
|
|
IQS62X_EVENT_NONE,
|
|
IQS62X_EVENT_NONE,
|
|
IQS62X_EVENT_NONE,
|
|
},
|
|
};
|
|
|
|
static const struct iqs62x_dev_desc iqs62x_devs[] = {
|
|
{
|
|
.dev_name = "iqs620at",
|
|
.sub_devs = iqs620at_sub_devs,
|
|
.num_sub_devs = ARRAY_SIZE(iqs620at_sub_devs),
|
|
.prod_num = IQS620_PROD_NUM,
|
|
.sw_num = 0x08,
|
|
.cal_regs = iqs620at_cal_regs,
|
|
.num_cal_regs = ARRAY_SIZE(iqs620at_cal_regs),
|
|
.prox_mask = BIT(0),
|
|
.sar_mask = BIT(1) | BIT(7),
|
|
.hall_mask = BIT(2),
|
|
.hyst_mask = BIT(3),
|
|
.temp_mask = BIT(4),
|
|
.prox_settings = IQS620_PROX_SETTINGS_4,
|
|
.hall_flags = IQS620_HALL_FLAGS,
|
|
.fw_name = "iqs620a.bin",
|
|
.event_regs = &iqs620a_event_regs[IQS62X_UI_PROX],
|
|
},
|
|
{
|
|
.dev_name = "iqs620a",
|
|
.sub_devs = iqs620a_sub_devs,
|
|
.num_sub_devs = ARRAY_SIZE(iqs620a_sub_devs),
|
|
.prod_num = IQS620_PROD_NUM,
|
|
.sw_num = 0x08,
|
|
.prox_mask = BIT(0),
|
|
.sar_mask = BIT(1) | BIT(7),
|
|
.hall_mask = BIT(2),
|
|
.hyst_mask = BIT(3),
|
|
.temp_mask = BIT(4),
|
|
.prox_settings = IQS620_PROX_SETTINGS_4,
|
|
.hall_flags = IQS620_HALL_FLAGS,
|
|
.fw_name = "iqs620a.bin",
|
|
.event_regs = &iqs620a_event_regs[IQS62X_UI_PROX],
|
|
},
|
|
{
|
|
.dev_name = "iqs621",
|
|
.sub_devs = iqs621_sub_devs,
|
|
.num_sub_devs = ARRAY_SIZE(iqs621_sub_devs),
|
|
.prod_num = IQS621_PROD_NUM,
|
|
.sw_num = 0x09,
|
|
.cal_regs = iqs621_cal_regs,
|
|
.num_cal_regs = ARRAY_SIZE(iqs621_cal_regs),
|
|
.prox_mask = BIT(0),
|
|
.hall_mask = BIT(1),
|
|
.als_mask = BIT(2),
|
|
.hyst_mask = BIT(3),
|
|
.temp_mask = BIT(4),
|
|
.als_flags = IQS621_ALS_FLAGS,
|
|
.hall_flags = IQS621_HALL_FLAGS,
|
|
.hyst_shift = 5,
|
|
.fw_name = "iqs621.bin",
|
|
.event_regs = &iqs621_event_regs[IQS62X_UI_PROX],
|
|
},
|
|
{
|
|
.dev_name = "iqs622",
|
|
.sub_devs = iqs622_sub_devs,
|
|
.num_sub_devs = ARRAY_SIZE(iqs622_sub_devs),
|
|
.prod_num = IQS622_PROD_NUM,
|
|
.sw_num = 0x06,
|
|
.prox_mask = BIT(0),
|
|
.sar_mask = BIT(1),
|
|
.hall_mask = BIT(2),
|
|
.als_mask = BIT(3),
|
|
.ir_mask = BIT(4),
|
|
.prox_settings = IQS622_PROX_SETTINGS_4,
|
|
.als_flags = IQS622_ALS_FLAGS,
|
|
.hall_flags = IQS622_HALL_FLAGS,
|
|
.fw_name = "iqs622.bin",
|
|
.event_regs = &iqs622_event_regs[IQS62X_UI_PROX],
|
|
},
|
|
{
|
|
.dev_name = "iqs624",
|
|
.sub_devs = iqs624_sub_devs,
|
|
.num_sub_devs = ARRAY_SIZE(iqs624_sub_devs),
|
|
.prod_num = IQS624_PROD_NUM,
|
|
.sw_num = 0x0B,
|
|
.interval = IQS624_INTERVAL_NUM,
|
|
.interval_div = 3,
|
|
.fw_name = "iqs624.bin",
|
|
.event_regs = &iqs624_event_regs[IQS62X_UI_PROX],
|
|
},
|
|
{
|
|
.dev_name = "iqs625",
|
|
.sub_devs = iqs625_sub_devs,
|
|
.num_sub_devs = ARRAY_SIZE(iqs625_sub_devs),
|
|
.prod_num = IQS625_PROD_NUM,
|
|
.sw_num = 0x0B,
|
|
.interval = IQS625_INTERVAL_NUM,
|
|
.interval_div = 10,
|
|
.fw_name = "iqs625.bin",
|
|
.event_regs = &iqs625_event_regs[IQS62X_UI_PROX],
|
|
},
|
|
};
|
|
|
|
static const struct regmap_config iqs62x_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = IQS62X_MAX_REG,
|
|
};
|
|
|
|
static int iqs62x_probe(struct i2c_client *client)
|
|
{
|
|
struct iqs62x_core *iqs62x;
|
|
struct iqs62x_info info;
|
|
unsigned int val;
|
|
int ret, i, j;
|
|
u8 sw_num = 0;
|
|
const char *fw_name = NULL;
|
|
|
|
iqs62x = devm_kzalloc(&client->dev, sizeof(*iqs62x), GFP_KERNEL);
|
|
if (!iqs62x)
|
|
return -ENOMEM;
|
|
|
|
i2c_set_clientdata(client, iqs62x);
|
|
iqs62x->client = client;
|
|
|
|
BLOCKING_INIT_NOTIFIER_HEAD(&iqs62x->nh);
|
|
INIT_LIST_HEAD(&iqs62x->fw_blk_head);
|
|
|
|
init_completion(&iqs62x->ati_done);
|
|
init_completion(&iqs62x->fw_done);
|
|
|
|
iqs62x->regmap = devm_regmap_init_i2c(client, &iqs62x_regmap_config);
|
|
if (IS_ERR(iqs62x->regmap)) {
|
|
ret = PTR_ERR(iqs62x->regmap);
|
|
dev_err(&client->dev, "Failed to initialize register map: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_raw_read(iqs62x->regmap, IQS62X_PROD_NUM, &info,
|
|
sizeof(info));
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* The following sequence validates the device's product and software
|
|
* numbers. It then determines if the device is factory-calibrated by
|
|
* checking for nonzero values in the device's designated calibration
|
|
* registers (if applicable). Depending on the device, the absence of
|
|
* calibration data indicates a reduced feature set or invalid device.
|
|
*
|
|
* For devices given in both calibrated and uncalibrated versions, the
|
|
* calibrated version (e.g. IQS620AT) appears first in the iqs62x_devs
|
|
* array. The uncalibrated version (e.g. IQS620A) appears next and has
|
|
* the same product and software numbers, but no calibration registers
|
|
* are specified.
|
|
*/
|
|
for (i = 0; i < ARRAY_SIZE(iqs62x_devs); i++) {
|
|
if (info.prod_num != iqs62x_devs[i].prod_num)
|
|
continue;
|
|
|
|
iqs62x->dev_desc = &iqs62x_devs[i];
|
|
|
|
if (info.sw_num < iqs62x->dev_desc->sw_num)
|
|
continue;
|
|
|
|
sw_num = info.sw_num;
|
|
|
|
/*
|
|
* Read each of the device's designated calibration registers,
|
|
* if any, and exit from the inner loop early if any are equal
|
|
* to zero (indicating the device is uncalibrated). This could
|
|
* be acceptable depending on the device (e.g. IQS620A instead
|
|
* of IQS620AT).
|
|
*/
|
|
for (j = 0; j < iqs62x->dev_desc->num_cal_regs; j++) {
|
|
ret = regmap_read(iqs62x->regmap,
|
|
iqs62x->dev_desc->cal_regs[j], &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!val)
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* If the number of nonzero values read from the device equals
|
|
* the number of designated calibration registers (which could
|
|
* be zero), exit from the outer loop early to signal that the
|
|
* device's product and software numbers match a known device,
|
|
* and the device is calibrated (if applicable).
|
|
*/
|
|
if (j == iqs62x->dev_desc->num_cal_regs)
|
|
break;
|
|
}
|
|
|
|
if (!iqs62x->dev_desc) {
|
|
dev_err(&client->dev, "Unrecognized product number: 0x%02X\n",
|
|
info.prod_num);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!sw_num) {
|
|
dev_err(&client->dev, "Unrecognized software number: 0x%02X\n",
|
|
info.sw_num);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (i == ARRAY_SIZE(iqs62x_devs)) {
|
|
dev_err(&client->dev, "Uncalibrated device\n");
|
|
return -ENODATA;
|
|
}
|
|
|
|
device_property_read_string(&client->dev, "firmware-name", &fw_name);
|
|
|
|
ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG,
|
|
fw_name ? : iqs62x->dev_desc->fw_name,
|
|
&client->dev, GFP_KERNEL, iqs62x,
|
|
iqs62x_firmware_load);
|
|
if (ret)
|
|
dev_err(&client->dev, "Failed to request firmware: %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int iqs62x_remove(struct i2c_client *client)
|
|
{
|
|
struct iqs62x_core *iqs62x = i2c_get_clientdata(client);
|
|
|
|
wait_for_completion(&iqs62x->fw_done);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused iqs62x_suspend(struct device *dev)
|
|
{
|
|
struct iqs62x_core *iqs62x = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
wait_for_completion(&iqs62x->fw_done);
|
|
|
|
/*
|
|
* As per the datasheet, automatic mode switching must be disabled
|
|
* before the device is placed in or taken out of halt mode.
|
|
*/
|
|
ret = regmap_update_bits(iqs62x->regmap, IQS62X_PWR_SETTINGS,
|
|
IQS62X_PWR_SETTINGS_DIS_AUTO, 0xFF);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return regmap_update_bits(iqs62x->regmap, IQS62X_PWR_SETTINGS,
|
|
IQS62X_PWR_SETTINGS_PWR_MODE_MASK,
|
|
IQS62X_PWR_SETTINGS_PWR_MODE_HALT);
|
|
}
|
|
|
|
static int __maybe_unused iqs62x_resume(struct device *dev)
|
|
{
|
|
struct iqs62x_core *iqs62x = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = regmap_update_bits(iqs62x->regmap, IQS62X_PWR_SETTINGS,
|
|
IQS62X_PWR_SETTINGS_PWR_MODE_MASK,
|
|
IQS62X_PWR_SETTINGS_PWR_MODE_NORM);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return regmap_update_bits(iqs62x->regmap, IQS62X_PWR_SETTINGS,
|
|
IQS62X_PWR_SETTINGS_DIS_AUTO, 0);
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(iqs62x_pm, iqs62x_suspend, iqs62x_resume);
|
|
|
|
static const struct of_device_id iqs62x_of_match[] = {
|
|
{ .compatible = "azoteq,iqs620a" },
|
|
{ .compatible = "azoteq,iqs621" },
|
|
{ .compatible = "azoteq,iqs622" },
|
|
{ .compatible = "azoteq,iqs624" },
|
|
{ .compatible = "azoteq,iqs625" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, iqs62x_of_match);
|
|
|
|
static struct i2c_driver iqs62x_i2c_driver = {
|
|
.driver = {
|
|
.name = "iqs62x",
|
|
.of_match_table = iqs62x_of_match,
|
|
.pm = &iqs62x_pm,
|
|
},
|
|
.probe_new = iqs62x_probe,
|
|
.remove = iqs62x_remove,
|
|
};
|
|
module_i2c_driver(iqs62x_i2c_driver);
|
|
|
|
MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
|
|
MODULE_DESCRIPTION("Azoteq IQS620A/621/622/624/625 Multi-Function Sensors");
|
|
MODULE_LICENSE("GPL");
|