mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 09:19:51 +00:00
![Chen-Yu Tsai](/assets/img/avatar_default.png)
The maximum supported voltage for ldo_io# is 3.3V, but on cold boot the selector comes up at 0x1f, which maps to 3.8V. This was previously corrected by Allwinner's U-boot, which set all regulators on the PMICs to some pre-configured voltage. With recent progress in U-boot SPL support, this is no longer the case. In any case we should handle this quirk in the kernel driver as well. This invalid setting causes _regulator_get_voltage() to fail with -EINVAL which causes regulator registration to fail when constrains are used: [ 1.054181] vcc-pg: failed to get the current voltage(-22) [ 1.059670] axp20x-regulator axp20x-regulator.0: Failed to register ldo_io0 [ 1.069749] axp20x-regulator: probe of axp20x-regulator.0 failed with error -22 This commits makes the axp20x regulator driver accept the 0x1f register value, fixing this. The datasheet does not guarantee reliable operation above 3.3V, so on boards where this regulator is used the regulator-max-microvolt setting must be 3.3V or less. This is essentially the same as the commitf40d4896bf
("regulator: axp20x: Fix axp22x ldo_io registration error on cold boot") for AXP22x PMICs. Fixes:a51f9f4622
("regulator: axp20x: support AXP809 variant") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org>
660 lines
22 KiB
C
660 lines
22 KiB
C
/*
|
|
* AXP20x regulators driver.
|
|
*
|
|
* Copyright (C) 2013 Carlo Caione <carlo@caione.org>
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General
|
|
* Public License. See the file "COPYING" in the main directory of this
|
|
* archive for more details.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/mfd/axp20x.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
|
|
#define AXP20X_IO_ENABLED 0x03
|
|
#define AXP20X_IO_DISABLED 0x07
|
|
|
|
#define AXP22X_IO_ENABLED 0x03
|
|
#define AXP22X_IO_DISABLED 0x04
|
|
|
|
#define AXP20X_WORKMODE_DCDC2_MASK BIT(2)
|
|
#define AXP20X_WORKMODE_DCDC3_MASK BIT(1)
|
|
#define AXP22X_WORKMODE_DCDCX_MASK(x) BIT(x)
|
|
|
|
#define AXP20X_FREQ_DCDC_MASK 0x0f
|
|
|
|
#define AXP22X_MISC_N_VBUSEN_FUNC BIT(4)
|
|
|
|
#define AXP_DESC_IO(_family, _id, _match, _supply, _min, _max, _step, _vreg, \
|
|
_vmask, _ereg, _emask, _enable_val, _disable_val) \
|
|
[_family##_##_id] = { \
|
|
.name = (_match), \
|
|
.supply_name = (_supply), \
|
|
.of_match = of_match_ptr(_match), \
|
|
.regulators_node = of_match_ptr("regulators"), \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.id = _family##_##_id, \
|
|
.n_voltages = (((_max) - (_min)) / (_step) + 1), \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = (_min) * 1000, \
|
|
.uV_step = (_step) * 1000, \
|
|
.vsel_reg = (_vreg), \
|
|
.vsel_mask = (_vmask), \
|
|
.enable_reg = (_ereg), \
|
|
.enable_mask = (_emask), \
|
|
.enable_val = (_enable_val), \
|
|
.disable_val = (_disable_val), \
|
|
.ops = &axp20x_ops, \
|
|
}
|
|
|
|
#define AXP_DESC(_family, _id, _match, _supply, _min, _max, _step, _vreg, \
|
|
_vmask, _ereg, _emask) \
|
|
[_family##_##_id] = { \
|
|
.name = (_match), \
|
|
.supply_name = (_supply), \
|
|
.of_match = of_match_ptr(_match), \
|
|
.regulators_node = of_match_ptr("regulators"), \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.id = _family##_##_id, \
|
|
.n_voltages = (((_max) - (_min)) / (_step) + 1), \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = (_min) * 1000, \
|
|
.uV_step = (_step) * 1000, \
|
|
.vsel_reg = (_vreg), \
|
|
.vsel_mask = (_vmask), \
|
|
.enable_reg = (_ereg), \
|
|
.enable_mask = (_emask), \
|
|
.ops = &axp20x_ops, \
|
|
}
|
|
|
|
#define AXP_DESC_SW(_family, _id, _match, _supply, _ereg, _emask) \
|
|
[_family##_##_id] = { \
|
|
.name = (_match), \
|
|
.supply_name = (_supply), \
|
|
.of_match = of_match_ptr(_match), \
|
|
.regulators_node = of_match_ptr("regulators"), \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.id = _family##_##_id, \
|
|
.owner = THIS_MODULE, \
|
|
.enable_reg = (_ereg), \
|
|
.enable_mask = (_emask), \
|
|
.ops = &axp20x_ops_sw, \
|
|
}
|
|
|
|
#define AXP_DESC_FIXED(_family, _id, _match, _supply, _volt) \
|
|
[_family##_##_id] = { \
|
|
.name = (_match), \
|
|
.supply_name = (_supply), \
|
|
.of_match = of_match_ptr(_match), \
|
|
.regulators_node = of_match_ptr("regulators"), \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.id = _family##_##_id, \
|
|
.n_voltages = 1, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = (_volt) * 1000, \
|
|
.ops = &axp20x_ops_fixed \
|
|
}
|
|
|
|
#define AXP_DESC_RANGES(_family, _id, _match, _supply, _ranges, _n_voltages, \
|
|
_vreg, _vmask, _ereg, _emask) \
|
|
[_family##_##_id] = { \
|
|
.name = (_match), \
|
|
.supply_name = (_supply), \
|
|
.of_match = of_match_ptr(_match), \
|
|
.regulators_node = of_match_ptr("regulators"), \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.id = _family##_##_id, \
|
|
.n_voltages = (_n_voltages), \
|
|
.owner = THIS_MODULE, \
|
|
.vsel_reg = (_vreg), \
|
|
.vsel_mask = (_vmask), \
|
|
.enable_reg = (_ereg), \
|
|
.enable_mask = (_emask), \
|
|
.linear_ranges = (_ranges), \
|
|
.n_linear_ranges = ARRAY_SIZE(_ranges), \
|
|
.ops = &axp20x_ops_range, \
|
|
}
|
|
|
|
static struct regulator_ops axp20x_ops_fixed = {
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
};
|
|
|
|
static struct regulator_ops axp20x_ops_range = {
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.list_voltage = regulator_list_voltage_linear_range,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
};
|
|
|
|
static struct regulator_ops axp20x_ops = {
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
};
|
|
|
|
static struct regulator_ops axp20x_ops_sw = {
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
};
|
|
|
|
static const struct regulator_linear_range axp20x_ldo4_ranges[] = {
|
|
REGULATOR_LINEAR_RANGE(1250000, 0x0, 0x0, 0),
|
|
REGULATOR_LINEAR_RANGE(1300000, 0x1, 0x8, 100000),
|
|
REGULATOR_LINEAR_RANGE(2500000, 0x9, 0x9, 0),
|
|
REGULATOR_LINEAR_RANGE(2700000, 0xa, 0xb, 100000),
|
|
REGULATOR_LINEAR_RANGE(3000000, 0xc, 0xf, 100000),
|
|
};
|
|
|
|
static const struct regulator_desc axp20x_regulators[] = {
|
|
AXP_DESC(AXP20X, DCDC2, "dcdc2", "vin2", 700, 2275, 25,
|
|
AXP20X_DCDC2_V_OUT, 0x3f, AXP20X_PWR_OUT_CTRL, 0x10),
|
|
AXP_DESC(AXP20X, DCDC3, "dcdc3", "vin3", 700, 3500, 25,
|
|
AXP20X_DCDC3_V_OUT, 0x7f, AXP20X_PWR_OUT_CTRL, 0x02),
|
|
AXP_DESC_FIXED(AXP20X, LDO1, "ldo1", "acin", 1300),
|
|
AXP_DESC(AXP20X, LDO2, "ldo2", "ldo24in", 1800, 3300, 100,
|
|
AXP20X_LDO24_V_OUT, 0xf0, AXP20X_PWR_OUT_CTRL, 0x04),
|
|
AXP_DESC(AXP20X, LDO3, "ldo3", "ldo3in", 700, 3500, 25,
|
|
AXP20X_LDO3_V_OUT, 0x7f, AXP20X_PWR_OUT_CTRL, 0x40),
|
|
AXP_DESC_RANGES(AXP20X, LDO4, "ldo4", "ldo24in", axp20x_ldo4_ranges,
|
|
16, AXP20X_LDO24_V_OUT, 0x0f, AXP20X_PWR_OUT_CTRL,
|
|
0x08),
|
|
AXP_DESC_IO(AXP20X, LDO5, "ldo5", "ldo5in", 1800, 3300, 100,
|
|
AXP20X_LDO5_V_OUT, 0xf0, AXP20X_GPIO0_CTRL, 0x07,
|
|
AXP20X_IO_ENABLED, AXP20X_IO_DISABLED),
|
|
};
|
|
|
|
static const struct regulator_desc axp22x_regulators[] = {
|
|
AXP_DESC(AXP22X, DCDC1, "dcdc1", "vin1", 1600, 3400, 100,
|
|
AXP22X_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(1)),
|
|
AXP_DESC(AXP22X, DCDC2, "dcdc2", "vin2", 600, 1540, 20,
|
|
AXP22X_DCDC2_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(2)),
|
|
AXP_DESC(AXP22X, DCDC3, "dcdc3", "vin3", 600, 1860, 20,
|
|
AXP22X_DCDC3_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(3)),
|
|
AXP_DESC(AXP22X, DCDC4, "dcdc4", "vin4", 600, 1540, 20,
|
|
AXP22X_DCDC4_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(4)),
|
|
AXP_DESC(AXP22X, DCDC5, "dcdc5", "vin5", 1000, 2550, 50,
|
|
AXP22X_DCDC5_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(5)),
|
|
/* secondary switchable output of DCDC1 */
|
|
AXP_DESC_SW(AXP22X, DC1SW, "dc1sw", NULL, AXP22X_PWR_OUT_CTRL2,
|
|
BIT(7)),
|
|
/* LDO regulator internally chained to DCDC5 */
|
|
AXP_DESC(AXP22X, DC5LDO, "dc5ldo", NULL, 700, 1400, 100,
|
|
AXP22X_DC5LDO_V_OUT, 0x7, AXP22X_PWR_OUT_CTRL1, BIT(0)),
|
|
AXP_DESC(AXP22X, ALDO1, "aldo1", "aldoin", 700, 3300, 100,
|
|
AXP22X_ALDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(6)),
|
|
AXP_DESC(AXP22X, ALDO2, "aldo2", "aldoin", 700, 3300, 100,
|
|
AXP22X_ALDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(7)),
|
|
AXP_DESC(AXP22X, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
|
|
AXP22X_ALDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(7)),
|
|
AXP_DESC(AXP22X, DLDO1, "dldo1", "dldoin", 700, 3300, 100,
|
|
AXP22X_DLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(3)),
|
|
AXP_DESC(AXP22X, DLDO2, "dldo2", "dldoin", 700, 3300, 100,
|
|
AXP22X_DLDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(4)),
|
|
AXP_DESC(AXP22X, DLDO3, "dldo3", "dldoin", 700, 3300, 100,
|
|
AXP22X_DLDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(5)),
|
|
AXP_DESC(AXP22X, DLDO4, "dldo4", "dldoin", 700, 3300, 100,
|
|
AXP22X_DLDO4_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(6)),
|
|
AXP_DESC(AXP22X, ELDO1, "eldo1", "eldoin", 700, 3300, 100,
|
|
AXP22X_ELDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(0)),
|
|
AXP_DESC(AXP22X, ELDO2, "eldo2", "eldoin", 700, 3300, 100,
|
|
AXP22X_ELDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(1)),
|
|
AXP_DESC(AXP22X, ELDO3, "eldo3", "eldoin", 700, 3300, 100,
|
|
AXP22X_ELDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(2)),
|
|
/* Note the datasheet only guarantees reliable operation up to
|
|
* 3.3V, this needs to be enforced via dts provided constraints */
|
|
AXP_DESC_IO(AXP22X, LDO_IO0, "ldo_io0", "ips", 700, 3800, 100,
|
|
AXP22X_LDO_IO0_V_OUT, 0x1f, AXP20X_GPIO0_CTRL, 0x07,
|
|
AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
|
|
/* Note the datasheet only guarantees reliable operation up to
|
|
* 3.3V, this needs to be enforced via dts provided constraints */
|
|
AXP_DESC_IO(AXP22X, LDO_IO1, "ldo_io1", "ips", 700, 3800, 100,
|
|
AXP22X_LDO_IO1_V_OUT, 0x1f, AXP20X_GPIO1_CTRL, 0x07,
|
|
AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
|
|
AXP_DESC_FIXED(AXP22X, RTC_LDO, "rtc_ldo", "ips", 3000),
|
|
};
|
|
|
|
static const struct regulator_desc axp22x_drivevbus_regulator = {
|
|
.name = "drivevbus",
|
|
.supply_name = "drivevbus",
|
|
.of_match = of_match_ptr("drivevbus"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.type = REGULATOR_VOLTAGE,
|
|
.owner = THIS_MODULE,
|
|
.enable_reg = AXP20X_VBUS_IPSOUT_MGMT,
|
|
.enable_mask = BIT(2),
|
|
.ops = &axp20x_ops_sw,
|
|
};
|
|
|
|
static const struct regulator_linear_range axp806_dcdca_ranges[] = {
|
|
REGULATOR_LINEAR_RANGE(600000, 0x0, 0x32, 10000),
|
|
REGULATOR_LINEAR_RANGE(1120000, 0x33, 0x47, 20000),
|
|
};
|
|
|
|
static const struct regulator_linear_range axp806_dcdcd_ranges[] = {
|
|
REGULATOR_LINEAR_RANGE(600000, 0x0, 0x2d, 20000),
|
|
REGULATOR_LINEAR_RANGE(1600000, 0x2e, 0x3f, 100000),
|
|
};
|
|
|
|
static const struct regulator_linear_range axp806_cldo2_ranges[] = {
|
|
REGULATOR_LINEAR_RANGE(700000, 0x0, 0x1a, 100000),
|
|
REGULATOR_LINEAR_RANGE(3400000, 0x1b, 0x1f, 200000),
|
|
};
|
|
|
|
static const struct regulator_desc axp806_regulators[] = {
|
|
AXP_DESC_RANGES(AXP806, DCDCA, "dcdca", "vina", axp806_dcdca_ranges,
|
|
72, AXP806_DCDCA_V_CTRL, 0x7f, AXP806_PWR_OUT_CTRL1,
|
|
BIT(0)),
|
|
AXP_DESC(AXP806, DCDCB, "dcdcb", "vinb", 1000, 2550, 50,
|
|
AXP806_DCDCB_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL1, BIT(1)),
|
|
AXP_DESC_RANGES(AXP806, DCDCC, "dcdcc", "vinc", axp806_dcdca_ranges,
|
|
72, AXP806_DCDCC_V_CTRL, 0x7f, AXP806_PWR_OUT_CTRL1,
|
|
BIT(2)),
|
|
AXP_DESC_RANGES(AXP806, DCDCD, "dcdcd", "vind", axp806_dcdcd_ranges,
|
|
64, AXP806_DCDCD_V_CTRL, 0x3f, AXP806_PWR_OUT_CTRL1,
|
|
BIT(3)),
|
|
AXP_DESC(AXP806, DCDCE, "dcdce", "vine", 1100, 3400, 100,
|
|
AXP806_DCDCB_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL1, BIT(4)),
|
|
AXP_DESC(AXP806, ALDO1, "aldo1", "aldoin", 700, 3300, 100,
|
|
AXP806_ALDO1_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL1, BIT(5)),
|
|
AXP_DESC(AXP806, ALDO2, "aldo2", "aldoin", 700, 3400, 100,
|
|
AXP806_ALDO2_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL1, BIT(6)),
|
|
AXP_DESC(AXP806, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
|
|
AXP806_ALDO3_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL1, BIT(7)),
|
|
AXP_DESC(AXP806, BLDO1, "bldo1", "bldoin", 700, 1900, 100,
|
|
AXP806_BLDO1_V_CTRL, 0x0f, AXP806_PWR_OUT_CTRL2, BIT(0)),
|
|
AXP_DESC(AXP806, BLDO2, "bldo2", "bldoin", 700, 1900, 100,
|
|
AXP806_BLDO2_V_CTRL, 0x0f, AXP806_PWR_OUT_CTRL2, BIT(1)),
|
|
AXP_DESC(AXP806, BLDO3, "bldo3", "bldoin", 700, 1900, 100,
|
|
AXP806_BLDO3_V_CTRL, 0x0f, AXP806_PWR_OUT_CTRL2, BIT(2)),
|
|
AXP_DESC(AXP806, BLDO4, "bldo4", "bldoin", 700, 1900, 100,
|
|
AXP806_BLDO4_V_CTRL, 0x0f, AXP806_PWR_OUT_CTRL2, BIT(3)),
|
|
AXP_DESC(AXP806, CLDO1, "cldo1", "cldoin", 700, 3300, 100,
|
|
AXP806_CLDO1_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL2, BIT(4)),
|
|
AXP_DESC_RANGES(AXP806, CLDO2, "cldo2", "cldoin", axp806_cldo2_ranges,
|
|
32, AXP806_CLDO2_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL2,
|
|
BIT(5)),
|
|
AXP_DESC(AXP806, CLDO3, "cldo3", "cldoin", 700, 3300, 100,
|
|
AXP806_CLDO3_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL2, BIT(6)),
|
|
AXP_DESC_SW(AXP806, SW, "sw", "swin", AXP806_PWR_OUT_CTRL2, BIT(7)),
|
|
};
|
|
|
|
static const struct regulator_linear_range axp809_dcdc4_ranges[] = {
|
|
REGULATOR_LINEAR_RANGE(600000, 0x0, 0x2f, 20000),
|
|
REGULATOR_LINEAR_RANGE(1800000, 0x30, 0x38, 100000),
|
|
};
|
|
|
|
static const struct regulator_desc axp809_regulators[] = {
|
|
AXP_DESC(AXP809, DCDC1, "dcdc1", "vin1", 1600, 3400, 100,
|
|
AXP22X_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(1)),
|
|
AXP_DESC(AXP809, DCDC2, "dcdc2", "vin2", 600, 1540, 20,
|
|
AXP22X_DCDC2_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(2)),
|
|
AXP_DESC(AXP809, DCDC3, "dcdc3", "vin3", 600, 1860, 20,
|
|
AXP22X_DCDC3_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(3)),
|
|
AXP_DESC_RANGES(AXP809, DCDC4, "dcdc4", "vin4", axp809_dcdc4_ranges,
|
|
57, AXP22X_DCDC4_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1,
|
|
BIT(4)),
|
|
AXP_DESC(AXP809, DCDC5, "dcdc5", "vin5", 1000, 2550, 50,
|
|
AXP22X_DCDC5_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(5)),
|
|
/* secondary switchable output of DCDC1 */
|
|
AXP_DESC_SW(AXP809, DC1SW, "dc1sw", NULL, AXP22X_PWR_OUT_CTRL2,
|
|
BIT(7)),
|
|
/* LDO regulator internally chained to DCDC5 */
|
|
AXP_DESC(AXP809, DC5LDO, "dc5ldo", NULL, 700, 1400, 100,
|
|
AXP22X_DC5LDO_V_OUT, 0x7, AXP22X_PWR_OUT_CTRL1, BIT(0)),
|
|
AXP_DESC(AXP809, ALDO1, "aldo1", "aldoin", 700, 3300, 100,
|
|
AXP22X_ALDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(6)),
|
|
AXP_DESC(AXP809, ALDO2, "aldo2", "aldoin", 700, 3300, 100,
|
|
AXP22X_ALDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(7)),
|
|
AXP_DESC(AXP809, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
|
|
AXP22X_ALDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(5)),
|
|
AXP_DESC_RANGES(AXP809, DLDO1, "dldo1", "dldoin", axp806_cldo2_ranges,
|
|
32, AXP22X_DLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2,
|
|
BIT(3)),
|
|
AXP_DESC(AXP809, DLDO2, "dldo2", "dldoin", 700, 3300, 100,
|
|
AXP22X_DLDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(4)),
|
|
AXP_DESC(AXP809, ELDO1, "eldo1", "eldoin", 700, 3300, 100,
|
|
AXP22X_ELDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(0)),
|
|
AXP_DESC(AXP809, ELDO2, "eldo2", "eldoin", 700, 3300, 100,
|
|
AXP22X_ELDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(1)),
|
|
AXP_DESC(AXP809, ELDO3, "eldo3", "eldoin", 700, 3300, 100,
|
|
AXP22X_ELDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(2)),
|
|
/*
|
|
* Note the datasheet only guarantees reliable operation up to
|
|
* 3.3V, this needs to be enforced via dts provided constraints
|
|
*/
|
|
AXP_DESC_IO(AXP809, LDO_IO0, "ldo_io0", "ips", 700, 3800, 100,
|
|
AXP22X_LDO_IO0_V_OUT, 0x1f, AXP20X_GPIO0_CTRL, 0x07,
|
|
AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
|
|
/*
|
|
* Note the datasheet only guarantees reliable operation up to
|
|
* 3.3V, this needs to be enforced via dts provided constraints
|
|
*/
|
|
AXP_DESC_IO(AXP809, LDO_IO1, "ldo_io1", "ips", 700, 3800, 100,
|
|
AXP22X_LDO_IO1_V_OUT, 0x1f, AXP20X_GPIO1_CTRL, 0x07,
|
|
AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
|
|
AXP_DESC_FIXED(AXP809, RTC_LDO, "rtc_ldo", "ips", 1800),
|
|
AXP_DESC_SW(AXP809, SW, "sw", "swin", AXP22X_PWR_OUT_CTRL2, BIT(6)),
|
|
};
|
|
|
|
static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
|
|
{
|
|
struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
|
|
unsigned int reg = AXP20X_DCDC_FREQ;
|
|
u32 min, max, def, step;
|
|
|
|
switch (axp20x->variant) {
|
|
case AXP202_ID:
|
|
case AXP209_ID:
|
|
min = 750;
|
|
max = 1875;
|
|
def = 1500;
|
|
step = 75;
|
|
break;
|
|
case AXP806_ID:
|
|
/*
|
|
* AXP806 DCDC work frequency setting has the same range and
|
|
* step as AXP22X, but at a different register.
|
|
* Fall through to the check below.
|
|
* (See include/linux/mfd/axp20x.h)
|
|
*/
|
|
reg = AXP806_DCDC_FREQ_CTRL;
|
|
case AXP221_ID:
|
|
case AXP223_ID:
|
|
case AXP809_ID:
|
|
min = 1800;
|
|
max = 4050;
|
|
def = 3000;
|
|
step = 150;
|
|
break;
|
|
default:
|
|
dev_err(&pdev->dev,
|
|
"Setting DCDC frequency for unsupported AXP variant\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (dcdcfreq == 0)
|
|
dcdcfreq = def;
|
|
|
|
if (dcdcfreq < min) {
|
|
dcdcfreq = min;
|
|
dev_warn(&pdev->dev, "DCDC frequency too low. Set to %ukHz\n",
|
|
min);
|
|
}
|
|
|
|
if (dcdcfreq > max) {
|
|
dcdcfreq = max;
|
|
dev_warn(&pdev->dev, "DCDC frequency too high. Set to %ukHz\n",
|
|
max);
|
|
}
|
|
|
|
dcdcfreq = (dcdcfreq - min) / step;
|
|
|
|
return regmap_update_bits(axp20x->regmap, reg,
|
|
AXP20X_FREQ_DCDC_MASK, dcdcfreq);
|
|
}
|
|
|
|
static int axp20x_regulator_parse_dt(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np, *regulators;
|
|
int ret;
|
|
u32 dcdcfreq = 0;
|
|
|
|
np = of_node_get(pdev->dev.parent->of_node);
|
|
if (!np)
|
|
return 0;
|
|
|
|
regulators = of_get_child_by_name(np, "regulators");
|
|
if (!regulators) {
|
|
dev_warn(&pdev->dev, "regulators node not found\n");
|
|
} else {
|
|
of_property_read_u32(regulators, "x-powers,dcdc-freq", &dcdcfreq);
|
|
ret = axp20x_set_dcdc_freq(pdev, dcdcfreq);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Error setting dcdc frequency: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
of_node_put(regulators);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 workmode)
|
|
{
|
|
struct axp20x_dev *axp20x = rdev_get_drvdata(rdev);
|
|
unsigned int reg = AXP20X_DCDC_MODE;
|
|
unsigned int mask;
|
|
|
|
switch (axp20x->variant) {
|
|
case AXP202_ID:
|
|
case AXP209_ID:
|
|
if ((id != AXP20X_DCDC2) && (id != AXP20X_DCDC3))
|
|
return -EINVAL;
|
|
|
|
mask = AXP20X_WORKMODE_DCDC2_MASK;
|
|
if (id == AXP20X_DCDC3)
|
|
mask = AXP20X_WORKMODE_DCDC3_MASK;
|
|
|
|
workmode <<= ffs(mask) - 1;
|
|
break;
|
|
|
|
case AXP806_ID:
|
|
reg = AXP806_DCDC_MODE_CTRL2;
|
|
/*
|
|
* AXP806 DCDC regulator IDs have the same range as AXP22X.
|
|
* Fall through to the check below.
|
|
* (See include/linux/mfd/axp20x.h)
|
|
*/
|
|
case AXP221_ID:
|
|
case AXP223_ID:
|
|
case AXP809_ID:
|
|
if (id < AXP22X_DCDC1 || id > AXP22X_DCDC5)
|
|
return -EINVAL;
|
|
|
|
mask = AXP22X_WORKMODE_DCDCX_MASK(id - AXP22X_DCDC1);
|
|
workmode <<= id - AXP22X_DCDC1;
|
|
break;
|
|
|
|
default:
|
|
/* should not happen */
|
|
WARN_ON(1);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return regmap_update_bits(rdev->regmap, reg, mask, workmode);
|
|
}
|
|
|
|
/*
|
|
* This function checks whether a regulator is part of a poly-phase
|
|
* output setup based on the registers settings. Returns true if it is.
|
|
*/
|
|
static bool axp20x_is_polyphase_slave(struct axp20x_dev *axp20x, int id)
|
|
{
|
|
u32 reg = 0;
|
|
|
|
/* Only AXP806 has poly-phase outputs */
|
|
if (axp20x->variant != AXP806_ID)
|
|
return false;
|
|
|
|
regmap_read(axp20x->regmap, AXP806_DCDC_MODE_CTRL2, ®);
|
|
|
|
switch (id) {
|
|
case AXP806_DCDCB:
|
|
return (((reg & GENMASK(7, 6)) == BIT(6)) ||
|
|
((reg & GENMASK(7, 6)) == BIT(7)));
|
|
case AXP806_DCDCC:
|
|
return ((reg & GENMASK(7, 6)) == BIT(7));
|
|
case AXP806_DCDCE:
|
|
return !!(reg & BIT(5));
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static int axp20x_regulator_probe(struct platform_device *pdev)
|
|
{
|
|
struct regulator_dev *rdev;
|
|
struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
|
|
const struct regulator_desc *regulators;
|
|
struct regulator_config config = {
|
|
.dev = pdev->dev.parent,
|
|
.regmap = axp20x->regmap,
|
|
.driver_data = axp20x,
|
|
};
|
|
int ret, i, nregulators;
|
|
u32 workmode;
|
|
const char *dcdc1_name = axp22x_regulators[AXP22X_DCDC1].name;
|
|
const char *dcdc5_name = axp22x_regulators[AXP22X_DCDC5].name;
|
|
bool drivevbus = false;
|
|
|
|
switch (axp20x->variant) {
|
|
case AXP202_ID:
|
|
case AXP209_ID:
|
|
regulators = axp20x_regulators;
|
|
nregulators = AXP20X_REG_ID_MAX;
|
|
break;
|
|
case AXP221_ID:
|
|
case AXP223_ID:
|
|
regulators = axp22x_regulators;
|
|
nregulators = AXP22X_REG_ID_MAX;
|
|
drivevbus = of_property_read_bool(pdev->dev.parent->of_node,
|
|
"x-powers,drive-vbus-en");
|
|
break;
|
|
case AXP806_ID:
|
|
regulators = axp806_regulators;
|
|
nregulators = AXP806_REG_ID_MAX;
|
|
break;
|
|
case AXP809_ID:
|
|
regulators = axp809_regulators;
|
|
nregulators = AXP809_REG_ID_MAX;
|
|
break;
|
|
default:
|
|
dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n",
|
|
axp20x->variant);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* This only sets the dcdc freq. Ignore any errors */
|
|
axp20x_regulator_parse_dt(pdev);
|
|
|
|
for (i = 0; i < nregulators; i++) {
|
|
const struct regulator_desc *desc = ®ulators[i];
|
|
struct regulator_desc *new_desc;
|
|
|
|
/*
|
|
* If this regulator is a slave in a poly-phase setup,
|
|
* skip it, as its controls are bound to the master
|
|
* regulator and won't work.
|
|
*/
|
|
if (axp20x_is_polyphase_slave(axp20x, i))
|
|
continue;
|
|
|
|
/*
|
|
* Regulators DC1SW and DC5LDO are connected internally,
|
|
* so we have to handle their supply names separately.
|
|
*
|
|
* We always register the regulators in proper sequence,
|
|
* so the supply names are correctly read. See the last
|
|
* part of this loop to see where we save the DT defined
|
|
* name.
|
|
*/
|
|
if ((regulators == axp22x_regulators && i == AXP22X_DC1SW) ||
|
|
(regulators == axp809_regulators && i == AXP809_DC1SW)) {
|
|
new_desc = devm_kzalloc(&pdev->dev, sizeof(*desc),
|
|
GFP_KERNEL);
|
|
*new_desc = regulators[i];
|
|
new_desc->supply_name = dcdc1_name;
|
|
desc = new_desc;
|
|
}
|
|
|
|
if ((regulators == axp22x_regulators && i == AXP22X_DC5LDO) ||
|
|
(regulators == axp809_regulators && i == AXP809_DC5LDO)) {
|
|
new_desc = devm_kzalloc(&pdev->dev, sizeof(*desc),
|
|
GFP_KERNEL);
|
|
*new_desc = regulators[i];
|
|
new_desc->supply_name = dcdc5_name;
|
|
desc = new_desc;
|
|
}
|
|
|
|
rdev = devm_regulator_register(&pdev->dev, desc, &config);
|
|
if (IS_ERR(rdev)) {
|
|
dev_err(&pdev->dev, "Failed to register %s\n",
|
|
regulators[i].name);
|
|
|
|
return PTR_ERR(rdev);
|
|
}
|
|
|
|
ret = of_property_read_u32(rdev->dev.of_node,
|
|
"x-powers,dcdc-workmode",
|
|
&workmode);
|
|
if (!ret) {
|
|
if (axp20x_set_dcdc_workmode(rdev, i, workmode))
|
|
dev_err(&pdev->dev, "Failed to set workmode on %s\n",
|
|
rdev->desc->name);
|
|
}
|
|
|
|
/*
|
|
* Save AXP22X DCDC1 / DCDC5 regulator names for later.
|
|
*/
|
|
if ((regulators == axp22x_regulators && i == AXP22X_DCDC1) ||
|
|
(regulators == axp809_regulators && i == AXP809_DCDC1))
|
|
of_property_read_string(rdev->dev.of_node,
|
|
"regulator-name",
|
|
&dcdc1_name);
|
|
|
|
if ((regulators == axp22x_regulators && i == AXP22X_DCDC5) ||
|
|
(regulators == axp809_regulators && i == AXP809_DCDC5))
|
|
of_property_read_string(rdev->dev.of_node,
|
|
"regulator-name",
|
|
&dcdc5_name);
|
|
}
|
|
|
|
if (drivevbus) {
|
|
/* Change N_VBUSEN sense pin to DRIVEVBUS output pin */
|
|
regmap_update_bits(axp20x->regmap, AXP20X_OVER_TMP,
|
|
AXP22X_MISC_N_VBUSEN_FUNC, 0);
|
|
rdev = devm_regulator_register(&pdev->dev,
|
|
&axp22x_drivevbus_regulator,
|
|
&config);
|
|
if (IS_ERR(rdev)) {
|
|
dev_err(&pdev->dev, "Failed to register drivevbus\n");
|
|
return PTR_ERR(rdev);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver axp20x_regulator_driver = {
|
|
.probe = axp20x_regulator_probe,
|
|
.driver = {
|
|
.name = "axp20x-regulator",
|
|
},
|
|
};
|
|
|
|
module_platform_driver(axp20x_regulator_driver);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
|
|
MODULE_DESCRIPTION("Regulator Driver for AXP20X PMIC");
|
|
MODULE_ALIAS("platform:axp20x-regulator");
|