linux-stable/include/linux/devfreq.h
Mauro Carvalho Chehab 7a51320ecd PM / devfreq: Get rid of some doc warnings
Mark "void *data" as literal, in order to avoid those doc warnings:

	./include/linux/devfreq.h:156: WARNING: Inline emphasis start-string without end-string.
	./include/linux/devfreq.h:259: WARNING: Inline emphasis start-string without end-string.
	./include/linux/devfreq.h:279: WARNING: Inline emphasis start-string without end-string.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-03-25 08:35:03 +09:00

420 lines
13 KiB
C

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* devfreq: Generic Dynamic Voltage and Frequency Scaling (DVFS) Framework
* for Non-CPU Devices.
*
* Copyright (C) 2011 Samsung Electronics
* MyungJoo Ham <myungjoo.ham@samsung.com>
*/
#ifndef __LINUX_DEVFREQ_H__
#define __LINUX_DEVFREQ_H__
#include <linux/device.h>
#include <linux/notifier.h>
#include <linux/pm_opp.h>
#include <linux/pm_qos.h>
#define DEVFREQ_NAME_LEN 16
/* DEVFREQ governor name */
#define DEVFREQ_GOV_SIMPLE_ONDEMAND "simple_ondemand"
#define DEVFREQ_GOV_PERFORMANCE "performance"
#define DEVFREQ_GOV_POWERSAVE "powersave"
#define DEVFREQ_GOV_USERSPACE "userspace"
#define DEVFREQ_GOV_PASSIVE "passive"
/* DEVFREQ notifier interface */
#define DEVFREQ_TRANSITION_NOTIFIER (0)
/* Transition notifiers of DEVFREQ_TRANSITION_NOTIFIER */
#define DEVFREQ_PRECHANGE (0)
#define DEVFREQ_POSTCHANGE (1)
struct devfreq;
struct devfreq_governor;
/**
* struct devfreq_dev_status - Data given from devfreq user device to
* governors. Represents the performance
* statistics.
* @total_time: The total time represented by this instance of
* devfreq_dev_status
* @busy_time: The time that the device was working among the
* total_time.
* @current_frequency: The operating frequency.
* @private_data: An entry not specified by the devfreq framework.
* A device and a specific governor may have their
* own protocol with private_data. However, because
* this is governor-specific, a governor using this
* will be only compatible with devices aware of it.
*/
struct devfreq_dev_status {
/* both since the last measure */
unsigned long total_time;
unsigned long busy_time;
unsigned long current_frequency;
void *private_data;
};
/*
* The resulting frequency should be at most this. (this bound is the
* least upper bound; thus, the resulting freq should be lower or same)
* If the flag is not set, the resulting frequency should be at most the
* bound (greatest lower bound)
*/
#define DEVFREQ_FLAG_LEAST_UPPER_BOUND 0x1
/**
* struct devfreq_dev_profile - Devfreq's user device profile
* @initial_freq: The operating frequency when devfreq_add_device() is
* called.
* @polling_ms: The polling interval in ms. 0 disables polling.
* @target: The device should set its operating frequency at
* freq or lowest-upper-than-freq value. If freq is
* higher than any operable frequency, set maximum.
* Before returning, target function should set
* freq at the current frequency.
* The "flags" parameter's possible values are
* explained above with "DEVFREQ_FLAG_*" macros.
* @get_dev_status: The device should provide the current performance
* status to devfreq. Governors are recommended not to
* use this directly. Instead, governors are recommended
* to use devfreq_update_stats() along with
* devfreq.last_status.
* @get_cur_freq: The device should provide the current frequency
* at which it is operating.
* @exit: An optional callback that is called when devfreq
* is removing the devfreq object due to error or
* from devfreq_remove_device() call. If the user
* has registered devfreq->nb at a notifier-head,
* this is the time to unregister it.
* @freq_table: Optional list of frequencies to support statistics
* and freq_table must be generated in ascending order.
* @max_state: The size of freq_table.
*/
struct devfreq_dev_profile {
unsigned long initial_freq;
unsigned int polling_ms;
int (*target)(struct device *dev, unsigned long *freq, u32 flags);
int (*get_dev_status)(struct device *dev,
struct devfreq_dev_status *stat);
int (*get_cur_freq)(struct device *dev, unsigned long *freq);
void (*exit)(struct device *dev);
unsigned long *freq_table;
unsigned int max_state;
};
/**
* struct devfreq_stats - Statistics of devfreq device behavior
* @total_trans: Number of devfreq transitions.
* @trans_table: Statistics of devfreq transitions.
* @time_in_state: Statistics of devfreq states.
* @last_update: The last time stats were updated.
*/
struct devfreq_stats {
unsigned int total_trans;
unsigned int *trans_table;
u64 *time_in_state;
u64 last_update;
};
/**
* struct devfreq - Device devfreq structure
* @node: list node - contains the devices with devfreq that have been
* registered.
* @lock: a mutex to protect accessing devfreq.
* @dev: device registered by devfreq class. dev.parent is the device
* using devfreq.
* @profile: device-specific devfreq profile
* @governor: method how to choose frequency based on the usage.
* @governor_name: devfreq governor name for use with this devfreq
* @nb: notifier block used to notify devfreq object that it should
* reevaluate operable frequencies. Devfreq users may use
* devfreq.nb to the corresponding register notifier call chain.
* @work: delayed work for load monitoring.
* @previous_freq: previously configured frequency value.
* @last_status: devfreq user device info, performance statistics
* @data: Private data of the governor. The devfreq framework does not
* touch this.
* @user_min_freq_req: PM QoS minimum frequency request from user (via sysfs)
* @user_max_freq_req: PM QoS maximum frequency request from user (via sysfs)
* @scaling_min_freq: Limit minimum frequency requested by OPP interface
* @scaling_max_freq: Limit maximum frequency requested by OPP interface
* @stop_polling: devfreq polling status of a device.
* @suspend_freq: frequency of a device set during suspend phase.
* @resume_freq: frequency of a device set in resume phase.
* @suspend_count: suspend requests counter for a device.
* @stats: Statistics of devfreq device behavior
* @transition_notifier_list: list head of DEVFREQ_TRANSITION_NOTIFIER notifier
* @nb_min: Notifier block for DEV_PM_QOS_MIN_FREQUENCY
* @nb_max: Notifier block for DEV_PM_QOS_MAX_FREQUENCY
*
* This structure stores the devfreq information for a given device.
*
* Note that when a governor accesses entries in struct devfreq in its
* functions except for the context of callbacks defined in struct
* devfreq_governor, the governor should protect its access with the
* struct mutex lock in struct devfreq. A governor may use this mutex
* to protect its own private data in ``void *data`` as well.
*/
struct devfreq {
struct list_head node;
struct mutex lock;
struct device dev;
struct devfreq_dev_profile *profile;
const struct devfreq_governor *governor;
char governor_name[DEVFREQ_NAME_LEN];
struct notifier_block nb;
struct delayed_work work;
unsigned long previous_freq;
struct devfreq_dev_status last_status;
void *data; /* private data for governors */
struct dev_pm_qos_request user_min_freq_req;
struct dev_pm_qos_request user_max_freq_req;
unsigned long scaling_min_freq;
unsigned long scaling_max_freq;
bool stop_polling;
unsigned long suspend_freq;
unsigned long resume_freq;
atomic_t suspend_count;
/* information for device frequency transitions */
struct devfreq_stats stats;
struct srcu_notifier_head transition_notifier_list;
struct notifier_block nb_min;
struct notifier_block nb_max;
};
struct devfreq_freqs {
unsigned long old;
unsigned long new;
};
#if defined(CONFIG_PM_DEVFREQ)
struct devfreq *devfreq_add_device(struct device *dev,
struct devfreq_dev_profile *profile,
const char *governor_name,
void *data);
int devfreq_remove_device(struct devfreq *devfreq);
struct devfreq *devm_devfreq_add_device(struct device *dev,
struct devfreq_dev_profile *profile,
const char *governor_name,
void *data);
void devm_devfreq_remove_device(struct device *dev, struct devfreq *devfreq);
/* Supposed to be called by PM callbacks */
int devfreq_suspend_device(struct devfreq *devfreq);
int devfreq_resume_device(struct devfreq *devfreq);
void devfreq_suspend(void);
void devfreq_resume(void);
/**
* update_devfreq() - Reevaluate the device and configure frequency
* @devfreq: the devfreq device
*
* Note: devfreq->lock must be held
*/
int update_devfreq(struct devfreq *devfreq);
/* Helper functions for devfreq user device driver with OPP. */
struct dev_pm_opp *devfreq_recommended_opp(struct device *dev,
unsigned long *freq, u32 flags);
int devfreq_register_opp_notifier(struct device *dev,
struct devfreq *devfreq);
int devfreq_unregister_opp_notifier(struct device *dev,
struct devfreq *devfreq);
int devm_devfreq_register_opp_notifier(struct device *dev,
struct devfreq *devfreq);
void devm_devfreq_unregister_opp_notifier(struct device *dev,
struct devfreq *devfreq);
int devfreq_register_notifier(struct devfreq *devfreq,
struct notifier_block *nb,
unsigned int list);
int devfreq_unregister_notifier(struct devfreq *devfreq,
struct notifier_block *nb,
unsigned int list);
int devm_devfreq_register_notifier(struct device *dev,
struct devfreq *devfreq,
struct notifier_block *nb,
unsigned int list);
void devm_devfreq_unregister_notifier(struct device *dev,
struct devfreq *devfreq,
struct notifier_block *nb,
unsigned int list);
struct devfreq *devfreq_get_devfreq_by_phandle(struct device *dev, int index);
#if IS_ENABLED(CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND)
/**
* struct devfreq_simple_ondemand_data - ``void *data`` fed to struct devfreq
* and devfreq_add_device
* @upthreshold: If the load is over this value, the frequency jumps.
* Specify 0 to use the default. Valid value = 0 to 100.
* @downdifferential: If the load is under upthreshold - downdifferential,
* the governor may consider slowing the frequency down.
* Specify 0 to use the default. Valid value = 0 to 100.
* downdifferential < upthreshold must hold.
*
* If the fed devfreq_simple_ondemand_data pointer is NULL to the governor,
* the governor uses the default values.
*/
struct devfreq_simple_ondemand_data {
unsigned int upthreshold;
unsigned int downdifferential;
};
#endif
#if IS_ENABLED(CONFIG_DEVFREQ_GOV_PASSIVE)
/**
* struct devfreq_passive_data - ``void *data`` fed to struct devfreq
* and devfreq_add_device
* @parent: the devfreq instance of parent device.
* @get_target_freq: Optional callback, Returns desired operating frequency
* for the device using passive governor. That is called
* when passive governor should decide the next frequency
* by using the new frequency of parent devfreq device
* using governors except for passive governor.
* If the devfreq device has the specific method to decide
* the next frequency, should use this callback.
* @this: the devfreq instance of own device.
* @nb: the notifier block for DEVFREQ_TRANSITION_NOTIFIER list
*
* The devfreq_passive_data have to set the devfreq instance of parent
* device with governors except for the passive governor. But, don't need to
* initialize the 'this' and 'nb' field because the devfreq core will handle
* them.
*/
struct devfreq_passive_data {
/* Should set the devfreq instance of parent device */
struct devfreq *parent;
/* Optional callback to decide the next frequency of passvice device */
int (*get_target_freq)(struct devfreq *this, unsigned long *freq);
/* For passive governor's internal use. Don't need to set them */
struct devfreq *this;
struct notifier_block nb;
};
#endif
#else /* !CONFIG_PM_DEVFREQ */
static inline struct devfreq *devfreq_add_device(struct device *dev,
struct devfreq_dev_profile *profile,
const char *governor_name,
void *data)
{
return ERR_PTR(-ENOSYS);
}
static inline int devfreq_remove_device(struct devfreq *devfreq)
{
return 0;
}
static inline struct devfreq *devm_devfreq_add_device(struct device *dev,
struct devfreq_dev_profile *profile,
const char *governor_name,
void *data)
{
return ERR_PTR(-ENOSYS);
}
static inline void devm_devfreq_remove_device(struct device *dev,
struct devfreq *devfreq)
{
}
static inline int devfreq_suspend_device(struct devfreq *devfreq)
{
return 0;
}
static inline int devfreq_resume_device(struct devfreq *devfreq)
{
return 0;
}
static inline void devfreq_suspend(void) {}
static inline void devfreq_resume(void) {}
static inline struct dev_pm_opp *devfreq_recommended_opp(struct device *dev,
unsigned long *freq, u32 flags)
{
return ERR_PTR(-EINVAL);
}
static inline int devfreq_register_opp_notifier(struct device *dev,
struct devfreq *devfreq)
{
return -EINVAL;
}
static inline int devfreq_unregister_opp_notifier(struct device *dev,
struct devfreq *devfreq)
{
return -EINVAL;
}
static inline int devm_devfreq_register_opp_notifier(struct device *dev,
struct devfreq *devfreq)
{
return -EINVAL;
}
static inline void devm_devfreq_unregister_opp_notifier(struct device *dev,
struct devfreq *devfreq)
{
}
static inline int devfreq_register_notifier(struct devfreq *devfreq,
struct notifier_block *nb,
unsigned int list)
{
return 0;
}
static inline int devfreq_unregister_notifier(struct devfreq *devfreq,
struct notifier_block *nb,
unsigned int list)
{
return 0;
}
static inline int devm_devfreq_register_notifier(struct device *dev,
struct devfreq *devfreq,
struct notifier_block *nb,
unsigned int list)
{
return 0;
}
static inline void devm_devfreq_unregister_notifier(struct device *dev,
struct devfreq *devfreq,
struct notifier_block *nb,
unsigned int list)
{
}
static inline struct devfreq *devfreq_get_devfreq_by_phandle(struct device *dev,
int index)
{
return ERR_PTR(-ENODEV);
}
static inline int devfreq_update_stats(struct devfreq *df)
{
return -EINVAL;
}
#endif /* CONFIG_PM_DEVFREQ */
#endif /* __LINUX_DEVFREQ_H__ */