linux-stable/include/linux/phylink.h
Russell King 4c0d6d3a7a net: phylink: add separate pcs operations structure
Add a separate set of PCS operations, which MAC drivers can use to
couple phylink with their associated MAC PCS layer.  The PCS
operations include:

- pcs_get_state() - reads the link up/down, resolved speed, duplex
   and pause from the PCS.
- pcs_config() - configures the PCS for the specified mode, PHY
   interface type, and setting the advertisement.
- pcs_an_restart() - restarts 802.3 in-band negotiation with the
   link partner
- pcs_link_up() - informs the PCS that link has come up, and the
   parameters of the link. Link parameters are used to program the
   PCS for fixed speed and non-inband modes.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30 11:52:27 -07:00

417 lines
16 KiB
C

#ifndef NETDEV_PCS_H
#define NETDEV_PCS_H
#include <linux/phy.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
struct device_node;
struct ethtool_cmd;
struct fwnode_handle;
struct net_device;
enum {
MLO_PAUSE_NONE,
MLO_PAUSE_RX = BIT(0),
MLO_PAUSE_TX = BIT(1),
MLO_PAUSE_TXRX_MASK = MLO_PAUSE_TX | MLO_PAUSE_RX,
MLO_PAUSE_AN = BIT(2),
MLO_AN_PHY = 0, /* Conventional PHY */
MLO_AN_FIXED, /* Fixed-link mode */
MLO_AN_INBAND, /* In-band protocol */
};
static inline bool phylink_autoneg_inband(unsigned int mode)
{
return mode == MLO_AN_INBAND;
}
/**
* struct phylink_link_state - link state structure
* @advertising: ethtool bitmask containing advertised link modes
* @lp_advertising: ethtool bitmask containing link partner advertised link
* modes
* @interface: link &typedef phy_interface_t mode
* @speed: link speed, one of the SPEED_* constants.
* @duplex: link duplex mode, one of DUPLEX_* constants.
* @pause: link pause state, described by MLO_PAUSE_* constants.
* @link: true if the link is up.
* @an_enabled: true if autonegotiation is enabled/desired.
* @an_complete: true if autonegotiation has completed.
*/
struct phylink_link_state {
__ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
__ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising);
phy_interface_t interface;
int speed;
int duplex;
int pause;
unsigned int link:1;
unsigned int an_enabled:1;
unsigned int an_complete:1;
};
enum phylink_op_type {
PHYLINK_NETDEV = 0,
PHYLINK_DEV,
};
/**
* struct phylink_config - PHYLINK configuration structure
* @dev: a pointer to a struct device associated with the MAC
* @type: operation type of PHYLINK instance
* @pcs_poll: MAC PCS cannot provide link change interrupt
*/
struct phylink_config {
struct device *dev;
enum phylink_op_type type;
bool pcs_poll;
};
/**
* struct phylink_mac_ops - MAC operations structure.
* @validate: Validate and update the link configuration.
* @mac_pcs_get_state: Read the current link state from the hardware.
* @mac_config: configure the MAC for the selected mode and state.
* @mac_an_restart: restart 802.3z BaseX autonegotiation.
* @mac_link_down: take the link down.
* @mac_link_up: allow the link to come up.
*
* The individual methods are described more fully below.
*/
struct phylink_mac_ops {
void (*validate)(struct phylink_config *config,
unsigned long *supported,
struct phylink_link_state *state);
void (*mac_pcs_get_state)(struct phylink_config *config,
struct phylink_link_state *state);
void (*mac_config)(struct phylink_config *config, unsigned int mode,
const struct phylink_link_state *state);
void (*mac_an_restart)(struct phylink_config *config);
void (*mac_link_down)(struct phylink_config *config, unsigned int mode,
phy_interface_t interface);
void (*mac_link_up)(struct phylink_config *config,
struct phy_device *phy, unsigned int mode,
phy_interface_t interface, int speed, int duplex,
bool tx_pause, bool rx_pause);
};
#if 0 /* For kernel-doc purposes only. */
/**
* validate - Validate and update the link configuration
* @config: a pointer to a &struct phylink_config.
* @supported: ethtool bitmask for supported link modes.
* @state: a pointer to a &struct phylink_link_state.
*
* Clear bits in the @supported and @state->advertising masks that
* are not supportable by the MAC.
*
* Note that the PHY may be able to transform from one connection
* technology to another, so, eg, don't clear 1000BaseX just
* because the MAC is unable to BaseX mode. This is more about
* clearing unsupported speeds and duplex settings. The port modes
* should not be cleared; phylink_set_port_modes() will help with this.
*
* If the @state->interface mode is %PHY_INTERFACE_MODE_1000BASEX
* or %PHY_INTERFACE_MODE_2500BASEX, select the appropriate mode
* based on @state->advertising and/or @state->speed and update
* @state->interface accordingly. See phylink_helper_basex_speed().
*
* When @state->interface is %PHY_INTERFACE_MODE_NA, phylink expects the
* MAC driver to return all supported link modes.
*
* If the @state->interface mode is not supported, then the @supported
* mask must be cleared.
*/
void validate(struct phylink_config *config, unsigned long *supported,
struct phylink_link_state *state);
/**
* mac_pcs_get_state() - Read the current inband link state from the hardware
* @config: a pointer to a &struct phylink_config.
* @state: a pointer to a &struct phylink_link_state.
*
* Read the current inband link state from the MAC PCS, reporting the
* current speed in @state->speed, duplex mode in @state->duplex, pause
* mode in @state->pause using the %MLO_PAUSE_RX and %MLO_PAUSE_TX bits,
* negotiation completion state in @state->an_complete, and link up state
* in @state->link. If possible, @state->lp_advertising should also be
* populated.
*/
void mac_pcs_get_state(struct phylink_config *config,
struct phylink_link_state *state);
/**
* mac_config() - configure the MAC for the selected mode and state
* @config: a pointer to a &struct phylink_config.
* @mode: one of %MLO_AN_FIXED, %MLO_AN_PHY, %MLO_AN_INBAND.
* @state: a pointer to a &struct phylink_link_state.
*
* Note - not all members of @state are valid. In particular,
* @state->lp_advertising, @state->link, @state->an_complete are never
* guaranteed to be correct, and so any mac_config() implementation must
* never reference these fields.
*
* (this requires a rewrite - please refer to mac_link_up() for situations
* where the PCS and MAC are not tightly integrated.)
*
* In all negotiation modes, as defined by @mode, @state->pause indicates the
* pause settings which should be applied as follows. If %MLO_PAUSE_AN is not
* set, %MLO_PAUSE_TX and %MLO_PAUSE_RX indicate whether the MAC should send
* pause frames and/or act on received pause frames respectively. Otherwise,
* the results of in-band negotiation/status from the MAC PCS should be used
* to control the MAC pause mode settings.
*
* The action performed depends on the currently selected mode:
*
* %MLO_AN_FIXED, %MLO_AN_PHY:
* Configure for non-inband negotiation mode, where the link settings
* are completely communicated via mac_link_up(). The physical link
* protocol from the MAC is specified by @state->interface.
*
* @state->advertising may be used, but is not required.
*
* Older drivers (prior to the mac_link_up() change) may use @state->speed,
* @state->duplex and @state->pause to configure the MAC, but this is
* deprecated; such drivers should be converted to use mac_link_up().
*
* Other members of @state must be ignored.
*
* Valid state members: interface, advertising.
* Deprecated state members: speed, duplex, pause.
*
* %MLO_AN_INBAND:
* place the link in an inband negotiation mode (such as 802.3z
* 1000base-X or Cisco SGMII mode depending on the @state->interface
* mode). In both cases, link state management (whether the link
* is up or not) is performed by the MAC, and reported via the
* mac_pcs_get_state() callback. Changes in link state must be made
* by calling phylink_mac_change().
*
* Interface mode specific details are mentioned below.
*
* If in 802.3z mode, the link speed is fixed, dependent on the
* @state->interface. Duplex and pause modes are negotiated via
* the in-band configuration word. Advertised pause modes are set
* according to the @state->an_enabled and @state->advertising
* flags. Beware of MACs which only support full duplex at gigabit
* and higher speeds.
*
* If in Cisco SGMII mode, the link speed and duplex mode are passed
* in the serial bitstream 16-bit configuration word, and the MAC
* should be configured to read these bits and acknowledge the
* configuration word. Nothing is advertised by the MAC. The MAC is
* responsible for reading the configuration word and configuring
* itself accordingly.
*
* Valid state members: interface, an_enabled, pause, advertising.
*
* Implementations are expected to update the MAC to reflect the
* requested settings - i.o.w., if nothing has changed between two
* calls, no action is expected. If only flow control settings have
* changed, flow control should be updated *without* taking the link
* down. This "update" behaviour is critical to avoid bouncing the
* link up status.
*/
void mac_config(struct phylink_config *config, unsigned int mode,
const struct phylink_link_state *state);
/**
* mac_an_restart() - restart 802.3z BaseX autonegotiation
* @config: a pointer to a &struct phylink_config.
*/
void mac_an_restart(struct phylink_config *config);
/**
* mac_link_down() - take the link down
* @config: a pointer to a &struct phylink_config.
* @mode: link autonegotiation mode
* @interface: link &typedef phy_interface_t mode
*
* If @mode is not an in-band negotiation mode (as defined by
* phylink_autoneg_inband()), force the link down and disable any
* Energy Efficient Ethernet MAC configuration. Interface type
* selection must be done in mac_config().
*/
void mac_link_down(struct phylink_config *config, unsigned int mode,
phy_interface_t interface);
/**
* mac_link_up() - allow the link to come up
* @config: a pointer to a &struct phylink_config.
* @phy: any attached phy
* @mode: link autonegotiation mode
* @interface: link &typedef phy_interface_t mode
* @speed: link speed
* @duplex: link duplex
* @tx_pause: link transmit pause enablement status
* @rx_pause: link receive pause enablement status
*
* Configure the MAC for an established link.
*
* @speed, @duplex, @tx_pause and @rx_pause indicate the finalised link
* settings, and should be used to configure the MAC block appropriately
* where these settings are not automatically conveyed from the PCS block,
* or if in-band negotiation (as defined by phylink_autoneg_inband(@mode))
* is disabled.
*
* Note that when 802.3z in-band negotiation is in use, it is possible
* that the user wishes to override the pause settings, and this should
* be allowed when considering the implementation of this method.
*
* If in-band negotiation mode is disabled, allow the link to come up. If
* @phy is non-%NULL, configure Energy Efficient Ethernet by calling
* phy_init_eee() and perform appropriate MAC configuration for EEE.
* Interface type selection must be done in mac_config().
*/
void mac_link_up(struct phylink_config *config, struct phy_device *phy,
unsigned int mode, phy_interface_t interface,
int speed, int duplex, bool tx_pause, bool rx_pause);
#endif
/**
* struct phylink_pcs_ops - MAC PCS operations structure.
* @pcs_get_state: read the current MAC PCS link state from the hardware.
* @pcs_config: configure the MAC PCS for the selected mode and state.
* @pcs_an_restart: restart 802.3z BaseX autonegotiation.
* @pcs_link_up: program the PCS for the resolved link configuration
* (where necessary).
*/
struct phylink_pcs_ops {
void (*pcs_get_state)(struct phylink_config *config,
struct phylink_link_state *state);
int (*pcs_config)(struct phylink_config *config, unsigned int mode,
phy_interface_t interface,
const unsigned long *advertising);
void (*pcs_an_restart)(struct phylink_config *config);
void (*pcs_link_up)(struct phylink_config *config, unsigned int mode,
phy_interface_t interface, int speed, int duplex);
};
#if 0 /* For kernel-doc purposes only. */
/**
* pcs_get_state() - Read the current inband link state from the hardware
* @config: a pointer to a &struct phylink_config.
* @state: a pointer to a &struct phylink_link_state.
*
* Read the current inband link state from the MAC PCS, reporting the
* current speed in @state->speed, duplex mode in @state->duplex, pause
* mode in @state->pause using the %MLO_PAUSE_RX and %MLO_PAUSE_TX bits,
* negotiation completion state in @state->an_complete, and link up state
* in @state->link. If possible, @state->lp_advertising should also be
* populated.
*
* When present, this overrides mac_pcs_get_state() in &struct
* phylink_mac_ops.
*/
void pcs_get_state(struct phylink_config *config,
struct phylink_link_state *state);
/**
* pcs_config() - Configure the PCS mode and advertisement
* @config: a pointer to a &struct phylink_config.
* @mode: one of %MLO_AN_FIXED, %MLO_AN_PHY, %MLO_AN_INBAND.
* @interface: interface mode to be used
* @advertising: adertisement ethtool link mode mask
*
* Configure the PCS for the operating mode, the interface mode, and set
* the advertisement mask.
*
* When operating in %MLO_AN_INBAND, inband should always be enabled,
* otherwise inband should be disabled.
*
* For SGMII, there is no advertisement from the MAC side, the PCS should
* be programmed to acknowledge the inband word from the PHY.
*
* For 1000BASE-X, the advertisement should be programmed into the PCS.
*
* For most 10GBASE-R, there is no advertisement.
*/
int (*pcs_config)(struct phylink_config *config, unsigned int mode,
phy_interface_t interface, const unsigned long *advertising);
/**
* pcs_an_restart() - restart 802.3z BaseX autonegotiation
* @config: a pointer to a &struct phylink_config.
*
* When PCS ops are present, this overrides mac_an_restart() in &struct
* phylink_mac_ops.
*/
void (*pcs_an_restart)(struct phylink_config *config);
/**
* pcs_link_up() - program the PCS for the resolved link configuration
* @config: a pointer to a &struct phylink_config.
* @mode: link autonegotiation mode
* @interface: link &typedef phy_interface_t mode
* @speed: link speed
* @duplex: link duplex
*
* This call will be made just before mac_link_up() to inform the PCS of
* the resolved link parameters. For example, a PCS operating in SGMII
* mode without in-band AN needs to be manually configured for the link
* and duplex setting. Otherwise, this should be a no-op.
*/
void (*pcs_link_up)(struct phylink_config *config, unsigned int mode,
phy_interface_t interface, int speed, int duplex);
#endif
struct phylink *phylink_create(struct phylink_config *, struct fwnode_handle *,
phy_interface_t iface,
const struct phylink_mac_ops *mac_ops);
void phylink_add_pcs(struct phylink *, const struct phylink_pcs_ops *ops);
void phylink_destroy(struct phylink *);
int phylink_connect_phy(struct phylink *, struct phy_device *);
int phylink_of_phy_connect(struct phylink *, struct device_node *, u32 flags);
void phylink_disconnect_phy(struct phylink *);
int phylink_fixed_state_cb(struct phylink *,
void (*cb)(struct net_device *dev,
struct phylink_link_state *));
void phylink_mac_change(struct phylink *, bool up);
void phylink_start(struct phylink *);
void phylink_stop(struct phylink *);
void phylink_ethtool_get_wol(struct phylink *, struct ethtool_wolinfo *);
int phylink_ethtool_set_wol(struct phylink *, struct ethtool_wolinfo *);
int phylink_ethtool_ksettings_get(struct phylink *,
struct ethtool_link_ksettings *);
int phylink_ethtool_ksettings_set(struct phylink *,
const struct ethtool_link_ksettings *);
int phylink_ethtool_nway_reset(struct phylink *);
void phylink_ethtool_get_pauseparam(struct phylink *,
struct ethtool_pauseparam *);
int phylink_ethtool_set_pauseparam(struct phylink *,
struct ethtool_pauseparam *);
int phylink_get_eee_err(struct phylink *);
int phylink_init_eee(struct phylink *, bool);
int phylink_ethtool_get_eee(struct phylink *, struct ethtool_eee *);
int phylink_ethtool_set_eee(struct phylink *, struct ethtool_eee *);
int phylink_mii_ioctl(struct phylink *, struct ifreq *, int);
#define phylink_zero(bm) \
bitmap_zero(bm, __ETHTOOL_LINK_MODE_MASK_NBITS)
#define __phylink_do_bit(op, bm, mode) \
op(ETHTOOL_LINK_MODE_ ## mode ## _BIT, bm)
#define phylink_set(bm, mode) __phylink_do_bit(__set_bit, bm, mode)
#define phylink_clear(bm, mode) __phylink_do_bit(__clear_bit, bm, mode)
#define phylink_test(bm, mode) __phylink_do_bit(test_bit, bm, mode)
void phylink_set_port_modes(unsigned long *bits);
void phylink_helper_basex_speed(struct phylink_link_state *state);
void phylink_mii_c22_pcs_get_state(struct mdio_device *pcs,
struct phylink_link_state *state);
int phylink_mii_c22_pcs_set_advertisement(struct mdio_device *pcs,
phy_interface_t interface,
const unsigned long *advertising);
void phylink_mii_c22_pcs_an_restart(struct mdio_device *pcs);
void phylink_mii_c45_pcs_get_state(struct mdio_device *pcs,
struct phylink_link_state *state);
#endif