linux-stable/arch/mips/kernel/ftrace.c
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

427 lines
11 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Code for replacing ftrace calls with jumps.
*
* Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com>
* Copyright (C) 2009, 2010 DSLab, Lanzhou University, China
* Author: Wu Zhangjin <wuzhangjin@gmail.com>
*
* Thanks goes to Steven Rostedt for writing the original x86 version.
*/
#include <linux/uaccess.h>
#include <linux/init.h>
#include <linux/ftrace.h>
#include <linux/syscalls.h>
#include <asm/asm.h>
#include <asm/asm-offsets.h>
#include <asm/cacheflush.h>
#include <asm/syscall.h>
#include <asm/uasm.h>
#include <asm/unistd.h>
#include <asm-generic/sections.h>
#if defined(KBUILD_MCOUNT_RA_ADDRESS) && defined(CONFIG_32BIT)
#define MCOUNT_OFFSET_INSNS 5
#else
#define MCOUNT_OFFSET_INSNS 4
#endif
#ifdef CONFIG_DYNAMIC_FTRACE
/* Arch override because MIPS doesn't need to run this from stop_machine() */
void arch_ftrace_update_code(int command)
{
ftrace_modify_all_code(command);
}
#endif
#ifdef CONFIG_DYNAMIC_FTRACE
#define JAL 0x0c000000 /* jump & link: ip --> ra, jump to target */
#define ADDR_MASK 0x03ffffff /* op_code|addr : 31...26|25 ....0 */
#define JUMP_RANGE_MASK ((1UL << 28) - 1)
#define INSN_NOP 0x00000000 /* nop */
#define INSN_JAL(addr) \
((unsigned int)(JAL | (((addr) >> 2) & ADDR_MASK)))
static unsigned int insn_jal_ftrace_caller __read_mostly;
static unsigned int insn_la_mcount[2] __read_mostly;
static unsigned int insn_j_ftrace_graph_caller __maybe_unused __read_mostly;
static inline void ftrace_dyn_arch_init_insns(void)
{
u32 *buf;
unsigned int v1;
/* la v1, _mcount */
v1 = 3;
buf = (u32 *)&insn_la_mcount[0];
UASM_i_LA(&buf, v1, MCOUNT_ADDR);
/* jal (ftrace_caller + 8), jump over the first two instruction */
buf = (u32 *)&insn_jal_ftrace_caller;
uasm_i_jal(&buf, (FTRACE_ADDR + 8) & JUMP_RANGE_MASK);
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
/* j ftrace_graph_caller */
buf = (u32 *)&insn_j_ftrace_graph_caller;
uasm_i_j(&buf, (unsigned long)ftrace_graph_caller & JUMP_RANGE_MASK);
#endif
}
static int ftrace_modify_code(unsigned long ip, unsigned int new_code)
{
int faulted;
mm_segment_t old_fs;
/* *(unsigned int *)ip = new_code; */
safe_store_code(new_code, ip, faulted);
if (unlikely(faulted))
return -EFAULT;
old_fs = get_fs();
set_fs(get_ds());
flush_icache_range(ip, ip + 8);
set_fs(old_fs);
return 0;
}
#ifndef CONFIG_64BIT
static int ftrace_modify_code_2(unsigned long ip, unsigned int new_code1,
unsigned int new_code2)
{
int faulted;
mm_segment_t old_fs;
safe_store_code(new_code1, ip, faulted);
if (unlikely(faulted))
return -EFAULT;
ip += 4;
safe_store_code(new_code2, ip, faulted);
if (unlikely(faulted))
return -EFAULT;
ip -= 4;
old_fs = get_fs();
set_fs(get_ds());
flush_icache_range(ip, ip + 8);
set_fs(old_fs);
return 0;
}
static int ftrace_modify_code_2r(unsigned long ip, unsigned int new_code1,
unsigned int new_code2)
{
int faulted;
mm_segment_t old_fs;
ip += 4;
safe_store_code(new_code2, ip, faulted);
if (unlikely(faulted))
return -EFAULT;
ip -= 4;
safe_store_code(new_code1, ip, faulted);
if (unlikely(faulted))
return -EFAULT;
old_fs = get_fs();
set_fs(get_ds());
flush_icache_range(ip, ip + 8);
set_fs(old_fs);
return 0;
}
#endif
/*
* The details about the calling site of mcount on MIPS
*
* 1. For kernel:
*
* move at, ra
* jal _mcount --> nop
* sub sp, sp, 8 --> nop (CONFIG_32BIT)
*
* 2. For modules:
*
* 2.1 For KBUILD_MCOUNT_RA_ADDRESS and CONFIG_32BIT
*
* lui v1, hi_16bit_of_mcount --> b 1f (0x10000005)
* addiu v1, v1, low_16bit_of_mcount --> nop (CONFIG_32BIT)
* move at, ra
* move $12, ra_address
* jalr v1
* sub sp, sp, 8
* 1: offset = 5 instructions
* 2.2 For the Other situations
*
* lui v1, hi_16bit_of_mcount --> b 1f (0x10000004)
* addiu v1, v1, low_16bit_of_mcount --> nop (CONFIG_32BIT)
* move at, ra
* jalr v1
* nop | move $12, ra_address | sub sp, sp, 8
* 1: offset = 4 instructions
*/
#define INSN_B_1F (0x10000000 | MCOUNT_OFFSET_INSNS)
int ftrace_make_nop(struct module *mod,
struct dyn_ftrace *rec, unsigned long addr)
{
unsigned int new;
unsigned long ip = rec->ip;
/*
* If ip is in kernel space, no long call, otherwise, long call is
* needed.
*/
new = core_kernel_text(ip) ? INSN_NOP : INSN_B_1F;
#ifdef CONFIG_64BIT
return ftrace_modify_code(ip, new);
#else
/*
* On 32 bit MIPS platforms, gcc adds a stack adjust
* instruction in the delay slot after the branch to
* mcount and expects mcount to restore the sp on return.
* This is based on a legacy API and does nothing but
* waste instructions so it's being removed at runtime.
*/
return ftrace_modify_code_2(ip, new, INSN_NOP);
#endif
}
int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
{
unsigned int new;
unsigned long ip = rec->ip;
new = core_kernel_text(ip) ? insn_jal_ftrace_caller : insn_la_mcount[0];
#ifdef CONFIG_64BIT
return ftrace_modify_code(ip, new);
#else
return ftrace_modify_code_2r(ip, new, core_kernel_text(ip) ?
INSN_NOP : insn_la_mcount[1]);
#endif
}
#define FTRACE_CALL_IP ((unsigned long)(&ftrace_call))
int ftrace_update_ftrace_func(ftrace_func_t func)
{
unsigned int new;
new = INSN_JAL((unsigned long)func);
return ftrace_modify_code(FTRACE_CALL_IP, new);
}
int __init ftrace_dyn_arch_init(void)
{
/* Encode the instructions when booting */
ftrace_dyn_arch_init_insns();
/* Remove "b ftrace_stub" to ensure ftrace_caller() is executed */
ftrace_modify_code(MCOUNT_ADDR, INSN_NOP);
return 0;
}
#endif /* CONFIG_DYNAMIC_FTRACE */
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
#ifdef CONFIG_DYNAMIC_FTRACE
extern void ftrace_graph_call(void);
#define FTRACE_GRAPH_CALL_IP ((unsigned long)(&ftrace_graph_call))
int ftrace_enable_ftrace_graph_caller(void)
{
return ftrace_modify_code(FTRACE_GRAPH_CALL_IP,
insn_j_ftrace_graph_caller);
}
int ftrace_disable_ftrace_graph_caller(void)
{
return ftrace_modify_code(FTRACE_GRAPH_CALL_IP, INSN_NOP);
}
#endif /* CONFIG_DYNAMIC_FTRACE */
#ifndef KBUILD_MCOUNT_RA_ADDRESS
#define S_RA_SP (0xafbf << 16) /* s{d,w} ra, offset(sp) */
#define S_R_SP (0xafb0 << 16) /* s{d,w} R, offset(sp) */
#define OFFSET_MASK 0xffff /* stack offset range: 0 ~ PT_SIZE */
unsigned long ftrace_get_parent_ra_addr(unsigned long self_ra, unsigned long
old_parent_ra, unsigned long parent_ra_addr, unsigned long fp)
{
unsigned long sp, ip, tmp;
unsigned int code;
int faulted;
/*
* For module, move the ip from the return address after the
* instruction "lui v1, hi_16bit_of_mcount"(offset is 24), but for
* kernel, move after the instruction "move ra, at"(offset is 16)
*/
ip = self_ra - (core_kernel_text(self_ra) ? 16 : 24);
/*
* search the text until finding the non-store instruction or "s{d,w}
* ra, offset(sp)" instruction
*/
do {
/* get the code at "ip": code = *(unsigned int *)ip; */
safe_load_code(code, ip, faulted);
if (unlikely(faulted))
return 0;
/*
* If we hit the non-store instruction before finding where the
* ra is stored, then this is a leaf function and it does not
* store the ra on the stack
*/
if ((code & S_R_SP) != S_R_SP)
return parent_ra_addr;
/* Move to the next instruction */
ip -= 4;
} while ((code & S_RA_SP) != S_RA_SP);
sp = fp + (code & OFFSET_MASK);
/* tmp = *(unsigned long *)sp; */
safe_load_stack(tmp, sp, faulted);
if (unlikely(faulted))
return 0;
if (tmp == old_parent_ra)
return sp;
return 0;
}
#endif /* !KBUILD_MCOUNT_RA_ADDRESS */
/*
* Hook the return address and push it in the stack of return addrs
* in current thread info.
*/
void prepare_ftrace_return(unsigned long *parent_ra_addr, unsigned long self_ra,
unsigned long fp)
{
unsigned long old_parent_ra;
struct ftrace_graph_ent trace;
unsigned long return_hooker = (unsigned long)
&return_to_handler;
int faulted, insns;
if (unlikely(ftrace_graph_is_dead()))
return;
if (unlikely(atomic_read(&current->tracing_graph_pause)))
return;
/*
* "parent_ra_addr" is the stack address saved the return address of
* the caller of _mcount.
*
* if the gcc < 4.5, a leaf function does not save the return address
* in the stack address, so, we "emulate" one in _mcount's stack space,
* and hijack it directly, but for a non-leaf function, it save the
* return address to the its own stack space, we can not hijack it
* directly, but need to find the real stack address,
* ftrace_get_parent_addr() does it!
*
* if gcc>= 4.5, with the new -mmcount-ra-address option, for a
* non-leaf function, the location of the return address will be saved
* to $12 for us, and for a leaf function, only put a zero into $12. we
* do it in ftrace_graph_caller of mcount.S.
*/
/* old_parent_ra = *parent_ra_addr; */
safe_load_stack(old_parent_ra, parent_ra_addr, faulted);
if (unlikely(faulted))
goto out;
#ifndef KBUILD_MCOUNT_RA_ADDRESS
parent_ra_addr = (unsigned long *)ftrace_get_parent_ra_addr(self_ra,
old_parent_ra, (unsigned long)parent_ra_addr, fp);
/*
* If fails when getting the stack address of the non-leaf function's
* ra, stop function graph tracer and return
*/
if (parent_ra_addr == 0)
goto out;
#endif
/* *parent_ra_addr = return_hooker; */
safe_store_stack(return_hooker, parent_ra_addr, faulted);
if (unlikely(faulted))
goto out;
if (ftrace_push_return_trace(old_parent_ra, self_ra, &trace.depth, fp,
NULL) == -EBUSY) {
*parent_ra_addr = old_parent_ra;
return;
}
/*
* Get the recorded ip of the current mcount calling site in the
* __mcount_loc section, which will be used to filter the function
* entries configured through the tracing/set_graph_function interface.
*/
insns = core_kernel_text(self_ra) ? 2 : MCOUNT_OFFSET_INSNS + 1;
trace.func = self_ra - (MCOUNT_INSN_SIZE * insns);
/* Only trace if the calling function expects to */
if (!ftrace_graph_entry(&trace)) {
current->curr_ret_stack--;
*parent_ra_addr = old_parent_ra;
}
return;
out:
ftrace_graph_stop();
WARN_ON(1);
}
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
#ifdef CONFIG_FTRACE_SYSCALLS
#ifdef CONFIG_32BIT
unsigned long __init arch_syscall_addr(int nr)
{
return (unsigned long)sys_call_table[nr - __NR_O32_Linux];
}
#endif
#ifdef CONFIG_64BIT
unsigned long __init arch_syscall_addr(int nr)
{
#ifdef CONFIG_MIPS32_N32
if (nr >= __NR_N32_Linux && nr <= __NR_N32_Linux + __NR_N32_Linux_syscalls)
return (unsigned long)sysn32_call_table[nr - __NR_N32_Linux];
#endif
if (nr >= __NR_64_Linux && nr <= __NR_64_Linux + __NR_64_Linux_syscalls)
return (unsigned long)sys_call_table[nr - __NR_64_Linux];
#ifdef CONFIG_MIPS32_O32
if (nr >= __NR_O32_Linux && nr <= __NR_O32_Linux + __NR_O32_Linux_syscalls)
return (unsigned long)sys32_call_table[nr - __NR_O32_Linux];
#endif
return (unsigned long) &sys_ni_syscall;
}
#endif
#endif /* CONFIG_FTRACE_SYSCALLS */