mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-22 17:01:14 +00:00
![Stephen Hemminger](/assets/img/avatar_default.png)
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
373 lines
13 KiB
C
373 lines
13 KiB
C
#ifndef __LINUX_IBMTR_H__
|
|
#define __LINUX_IBMTR_H__
|
|
|
|
/* Definitions for an IBM Token Ring card. */
|
|
/* This file is distributed under the GNU GPL */
|
|
|
|
/* ported to the Alpha architecture 02/20/96 (just used the HZ macro) */
|
|
|
|
#define TR_RETRY_INTERVAL (30*HZ) /* 500 on PC = 5 s */
|
|
#define TR_RST_TIME (msecs_to_jiffies(50)) /* 5 on PC = 50 ms */
|
|
#define TR_BUSY_INTERVAL (msecs_to_jiffies(200)) /* 5 on PC = 200 ms */
|
|
#define TR_SPIN_INTERVAL (3*HZ) /* 3 seconds before init timeout */
|
|
|
|
#define TR_ISA 1
|
|
#define TR_MCA 2
|
|
#define TR_ISAPNP 3
|
|
#define NOTOK 0
|
|
|
|
#define IBMTR_SHARED_RAM_SIZE 0x10000
|
|
#define IBMTR_IO_EXTENT 4
|
|
#define IBMTR_MAX_ADAPTERS 4
|
|
|
|
#define CHANNEL_ID 0X1F30
|
|
#define AIP 0X1F00
|
|
#define AIPADAPTYPE 0X1FA0
|
|
#define AIPDATARATE 0X1FA2
|
|
#define AIPEARLYTOKEN 0X1FA4
|
|
#define AIPAVAILSHRAM 0X1FA6
|
|
#define AIPSHRAMPAGE 0X1FA8
|
|
#define AIP4MBDHB 0X1FAA
|
|
#define AIP16MBDHB 0X1FAC
|
|
#define AIPFID 0X1FBA
|
|
|
|
#define ADAPTRESET 0x1 /* Control Adapter reset (add to base) */
|
|
#define ADAPTRESETREL 0x2 /* Release Adapter from reset ( """) */
|
|
#define ADAPTINTREL 0x3 /* Adapter interrupt release */
|
|
|
|
#define GLOBAL_INT_ENABLE 0x02f0
|
|
|
|
/* MMIO bits 0-4 select register */
|
|
#define RRR_EVEN 0x00 /* Shared RAM relocation registers - even and odd */
|
|
/* Used to set the starting address of shared RAM */
|
|
/* Bits 1 through 7 of this register map to bits 13 through 19 of the shared
|
|
RAM address.*/
|
|
/* ie: 0x02 sets RAM address to ...ato! issy su wazzoo !! GODZILLA!!! */
|
|
#define RRR_ODD 0x01
|
|
/* Bits 2 and 3 of this register can be read to determine shared RAM size */
|
|
/* 00 for 8k, 01 for 16k, 10 for 32k, 11 for 64k */
|
|
#define WRBR_EVEN 0x02 /* Write region base registers - even and odd */
|
|
#define WRBR_ODD 0x03
|
|
#define WWOR_EVEN 0x04 /* Write window open registers - even and odd */
|
|
#define WWOR_ODD 0x05
|
|
#define WWCR_EVEN 0x06 /* Write window close registers - even and odd */
|
|
#define WWCR_ODD 0x07
|
|
|
|
/* Interrupt status registers - PC system - even and odd */
|
|
#define ISRP_EVEN 0x08
|
|
|
|
#define TCR_INT 0x10 /* Bit 4 - Timer interrupt. The TVR_EVEN timer has
|
|
expired. */
|
|
#define ERR_INT 0x08 /* Bit 3 - Error interrupt. The adapter has had an
|
|
internal error. */
|
|
#define ACCESS_INT 0x04 /* Bit 2 - Access interrupt. You have attempted to
|
|
write to an invalid area of shared RAM
|
|
or an invalid register within the MMIO. */
|
|
/* In addition, the following bits within ISRP_EVEN can be turned on or off */
|
|
/* by you to control the interrupt processing: */
|
|
#define INT_ENABLE 0x40 /* Bit 6 - Interrupt enable. If 0, no interrupts will
|
|
occur. If 1, interrupts will occur normally.
|
|
Normally set to 1. */
|
|
/* Bit 0 - Primary or alternate adapter. Set to zero if this adapter is the
|
|
primary adapter, 1 if this adapter is the alternate adapter. */
|
|
|
|
|
|
#define ISRP_ODD 0x09
|
|
|
|
#define ADAP_CHK_INT 0x40 /* Bit 6 - Adapter check. the adapter has
|
|
encountered a serious problem and has closed
|
|
itself. Whoa. */
|
|
#define SRB_RESP_INT 0x20 /* Bit 5 - SRB response. The adapter has accepted
|
|
an SRB request and set the return code within
|
|
the SRB. */
|
|
#define ASB_FREE_INT 0x10 /* Bit 4 - ASB free. The adapter has read the ASB
|
|
and this area can be safely reused. This interrupt
|
|
is only used if your application has set the ASB
|
|
free request bit in ISRA_ODD or if an error was
|
|
detected in your response. */
|
|
#define ARB_CMD_INT 0x08 /* Bit 3 - ARB command. The adapter has given you a
|
|
command for action. The command is located in the
|
|
ARB area of shared memory. */
|
|
#define SSB_RESP_INT 0x04 /* Bit 2 - SSB response. The adapter has posted a
|
|
response to your SRB (the response is located in
|
|
the SSB area of shared memory). */
|
|
/* Bit 1 - Bridge frame forward complete. */
|
|
|
|
|
|
|
|
#define ISRA_EVEN 0x0A /*Interrupt status registers - adapter - even and odd */
|
|
/* Bit 7 - Internal parity error (on adapter's internal bus) */
|
|
/* Bit 6 - Timer interrupt pending */
|
|
/* Bit 5 - Access interrupt (attempt by adapter to access illegal address) */
|
|
/* Bit 4 - Adapter microcode problem (microcode dead-man timer expired) */
|
|
/* Bit 3 - Adapter processor check status */
|
|
/* Bit 2 - Reserved */
|
|
/* Bit 1 - Adapter hardware interrupt mask (prevents internal interrupts) */
|
|
/* Bit 0 - Adapter software interrupt mask (prevents internal software ints) */
|
|
|
|
#define ISRA_ODD 0x0B
|
|
#define CMD_IN_SRB 0x20 /* Bit 5 - Indicates that you have placed a new
|
|
command in the SRB and are ready for the adapter to
|
|
process the command. */
|
|
#define RESP_IN_ASB 0x10 /* Bit 4 - Indicates that you have placed a response
|
|
(an ASB) in the shared RAM which is available for
|
|
the adapter's use. */
|
|
/* Bit 3 - Indicates that you are ready to put an SRB in the shared RAM, but
|
|
that a previous command is still pending. The adapter will then
|
|
interrupt you when the previous command is completed */
|
|
/* Bit 2 - Indicates that you are ready to put an ASB in the shared RAM, but
|
|
that a previous ASB is still pending. The adapter will then interrupt
|
|
you when the previous ASB is copied. */
|
|
#define ARB_FREE 0x2
|
|
#define SSB_FREE 0x1
|
|
|
|
#define TCR_EVEN 0x0C /* Timer control registers - even and odd */
|
|
#define TCR_ODD 0x0D
|
|
#define TVR_EVEN 0x0E /* Timer value registers - even and odd */
|
|
#define TVR_ODD 0x0F
|
|
#define SRPR_EVEN 0x18 /* Shared RAM paging registers - even and odd */
|
|
#define SRPR_ENABLE_PAGING 0xc0
|
|
#define SRPR_ODD 0x19 /* Not used. */
|
|
#define TOKREAD 0x60
|
|
#define TOKOR 0x40
|
|
#define TOKAND 0x20
|
|
#define TOKWRITE 0x00
|
|
|
|
/* MMIO bits 5-6 select operation */
|
|
/* 00 is used to write to a register */
|
|
/* 01 is used to bitwise AND a byte with a register */
|
|
/* 10 is used to bitwise OR a byte with a register */
|
|
/* 11 is used to read from a register */
|
|
|
|
/* MMIO bits 7-8 select area of interest.. see below */
|
|
/* 00 selects attachment control area. */
|
|
/* 01 is reserved. */
|
|
/* 10 selects adapter identification area A containing the adapter encoded
|
|
address. */
|
|
/* 11 selects the adapter identification area B containing test patterns. */
|
|
|
|
#define PCCHANNELID 5049434F3631313039393020
|
|
#define MCCHANNELID 4D4152533633583435313820
|
|
|
|
#define ACA_OFFSET 0x1e00
|
|
#define ACA_SET 0x40
|
|
#define ACA_RESET 0x20
|
|
#define ACA_RW 0x00
|
|
|
|
#ifdef ENABLE_PAGING
|
|
#define SET_PAGE(x) (writeb((x), ti->mmio + ACA_OFFSET+ ACA_RW + SRPR_EVEN))
|
|
#else
|
|
#define SET_PAGE(x)
|
|
#endif
|
|
|
|
/* do_tok_int possible values */
|
|
#define FIRST_INT 1
|
|
#define NOT_FIRST 2
|
|
|
|
typedef enum { CLOSED, OPEN } open_state;
|
|
//staic const char *printstate[] = { "CLOSED","OPEN"};
|
|
|
|
struct tok_info {
|
|
unsigned char irq;
|
|
void __iomem *mmio;
|
|
unsigned char hw_address[32];
|
|
unsigned char adapter_type;
|
|
unsigned char data_rate;
|
|
unsigned char token_release;
|
|
unsigned char avail_shared_ram;
|
|
unsigned char shared_ram_paging;
|
|
unsigned char turbo;
|
|
unsigned short dhb_size4mb;
|
|
unsigned short rbuf_len4;
|
|
unsigned short rbuf_cnt4;
|
|
unsigned short maxmtu4;
|
|
unsigned short dhb_size16mb;
|
|
unsigned short rbuf_len16;
|
|
unsigned short rbuf_cnt16;
|
|
unsigned short maxmtu16;
|
|
/* Additions by David Morris */
|
|
unsigned char do_tok_int;
|
|
wait_queue_head_t wait_for_reset;
|
|
unsigned char sram_base;
|
|
/* Additions by Peter De Schrijver */
|
|
unsigned char page_mask; /* mask to select RAM page to Map*/
|
|
unsigned char mapped_ram_size; /* size of RAM page */
|
|
__u32 sram_phys; /* Shared memory base address */
|
|
void __iomem *sram_virt; /* Shared memory base address */
|
|
void __iomem *init_srb; /* Initial System Request Block address */
|
|
void __iomem *srb; /* System Request Block address */
|
|
void __iomem *ssb; /* System Status Block address */
|
|
void __iomem *arb; /* Adapter Request Block address */
|
|
void __iomem *asb; /* Adapter Status Block address */
|
|
__u8 init_srb_page;
|
|
__u8 srb_page;
|
|
__u8 ssb_page;
|
|
__u8 arb_page;
|
|
__u8 asb_page;
|
|
unsigned short exsap_station_id;
|
|
unsigned short global_int_enable;
|
|
struct sk_buff *current_skb;
|
|
|
|
unsigned char auto_speedsave;
|
|
open_state open_status, sap_status;
|
|
enum {MANUAL, AUTOMATIC} open_mode;
|
|
enum {FAIL, RESTART, REOPEN} open_action;
|
|
enum {NO, YES} open_failure;
|
|
unsigned char readlog_pending;
|
|
unsigned short adapter_int_enable; /* Adapter-specific int enable */
|
|
struct timer_list tr_timer;
|
|
unsigned char ring_speed;
|
|
spinlock_t lock; /* SMP protection */
|
|
};
|
|
|
|
/* token ring adapter commands */
|
|
#define DIR_INTERRUPT 0x00 /* struct srb_interrupt */
|
|
#define DIR_MOD_OPEN_PARAMS 0x01
|
|
#define DIR_OPEN_ADAPTER 0x03 /* struct dir_open_adapter */
|
|
#define DIR_CLOSE_ADAPTER 0x04
|
|
#define DIR_SET_GRP_ADDR 0x06
|
|
#define DIR_SET_FUNC_ADDR 0x07 /* struct srb_set_funct_addr */
|
|
#define DIR_READ_LOG 0x08 /* struct srb_read_log */
|
|
#define DLC_OPEN_SAP 0x15 /* struct dlc_open_sap */
|
|
#define DLC_CLOSE_SAP 0x16
|
|
#define DATA_LOST 0x20 /* struct asb_rec */
|
|
#define REC_DATA 0x81 /* struct arb_rec_req */
|
|
#define XMIT_DATA_REQ 0x82 /* struct arb_xmit_req */
|
|
#define DLC_STATUS 0x83 /* struct arb_dlc_status */
|
|
#define RING_STAT_CHANGE 0x84 /* struct dlc_open_sap ??? */
|
|
|
|
/* DIR_OPEN_ADAPTER options */
|
|
#define OPEN_PASS_BCON_MAC 0x0100
|
|
#define NUM_RCV_BUF 2
|
|
#define RCV_BUF_LEN 1024
|
|
#define DHB_LENGTH 2048
|
|
#define NUM_DHB 2
|
|
#define DLC_MAX_SAP 2
|
|
#define DLC_MAX_STA 1
|
|
|
|
/* DLC_OPEN_SAP options */
|
|
#define MAX_I_FIELD 0x0088
|
|
#define SAP_OPEN_IND_SAP 0x04
|
|
#define SAP_OPEN_PRIORITY 0x20
|
|
#define SAP_OPEN_STATION_CNT 0x1
|
|
#define XMIT_DIR_FRAME 0x0A
|
|
#define XMIT_UI_FRAME 0x0d
|
|
#define XMIT_XID_CMD 0x0e
|
|
#define XMIT_TEST_CMD 0x11
|
|
|
|
/* srb close return code */
|
|
#define SIGNAL_LOSS 0x8000
|
|
#define HARD_ERROR 0x4000
|
|
#define XMIT_BEACON 0x1000
|
|
#define LOBE_FAULT 0x0800
|
|
#define AUTO_REMOVAL 0x0400
|
|
#define REMOVE_RECV 0x0100
|
|
#define LOG_OVERFLOW 0x0080
|
|
#define RING_RECOVER 0x0020
|
|
|
|
struct srb_init_response {
|
|
unsigned char command;
|
|
unsigned char init_status;
|
|
unsigned char init_status_2;
|
|
unsigned char reserved[3];
|
|
__u16 bring_up_code;
|
|
__u16 encoded_address;
|
|
__u16 level_address;
|
|
__u16 adapter_address;
|
|
__u16 parms_address;
|
|
__u16 mac_address;
|
|
};
|
|
|
|
struct dir_open_adapter {
|
|
unsigned char command;
|
|
char reserved[7];
|
|
__u16 open_options;
|
|
unsigned char node_address[6];
|
|
unsigned char group_address[4];
|
|
unsigned char funct_address[4];
|
|
__u16 num_rcv_buf;
|
|
__u16 rcv_buf_len;
|
|
__u16 dhb_length;
|
|
unsigned char num_dhb;
|
|
char reserved2;
|
|
unsigned char dlc_max_sap;
|
|
unsigned char dlc_max_sta;
|
|
unsigned char dlc_max_gsap;
|
|
unsigned char dlc_max_gmem;
|
|
unsigned char dlc_t1_tick_1;
|
|
unsigned char dlc_t2_tick_1;
|
|
unsigned char dlc_ti_tick_1;
|
|
unsigned char dlc_t1_tick_2;
|
|
unsigned char dlc_t2_tick_2;
|
|
unsigned char dlc_ti_tick_2;
|
|
unsigned char product_id[18];
|
|
};
|
|
|
|
struct dlc_open_sap {
|
|
unsigned char command;
|
|
unsigned char reserved1;
|
|
unsigned char ret_code;
|
|
unsigned char reserved2;
|
|
__u16 station_id;
|
|
unsigned char timer_t1;
|
|
unsigned char timer_t2;
|
|
unsigned char timer_ti;
|
|
unsigned char maxout;
|
|
unsigned char maxin;
|
|
unsigned char maxout_incr;
|
|
unsigned char max_retry_count;
|
|
unsigned char gsap_max_mem;
|
|
__u16 max_i_field;
|
|
unsigned char sap_value;
|
|
unsigned char sap_options;
|
|
unsigned char station_count;
|
|
unsigned char sap_gsap_mem;
|
|
unsigned char gsap[0];
|
|
};
|
|
|
|
struct srb_xmit {
|
|
unsigned char command;
|
|
unsigned char cmd_corr;
|
|
unsigned char ret_code;
|
|
unsigned char reserved1;
|
|
__u16 station_id;
|
|
};
|
|
|
|
struct arb_rec_req {
|
|
unsigned char command;
|
|
unsigned char reserved1[3];
|
|
__u16 station_id;
|
|
__u16 rec_buf_addr;
|
|
unsigned char lan_hdr_len;
|
|
unsigned char dlc_hdr_len;
|
|
__u16 frame_len;
|
|
unsigned char msg_type;
|
|
};
|
|
|
|
struct asb_rec {
|
|
unsigned char command;
|
|
unsigned char reserved1;
|
|
unsigned char ret_code;
|
|
unsigned char reserved2;
|
|
__u16 station_id;
|
|
__u16 rec_buf_addr;
|
|
};
|
|
|
|
struct rec_buf {
|
|
unsigned char reserved1[2];
|
|
__u16 buf_ptr;
|
|
unsigned char reserved2;
|
|
unsigned char receive_fs;
|
|
__u16 buf_len;
|
|
unsigned char data[0];
|
|
};
|
|
|
|
struct srb_set_funct_addr {
|
|
unsigned char command;
|
|
unsigned char reserved1;
|
|
unsigned char ret_code;
|
|
unsigned char reserved2[3];
|
|
unsigned char funct_address[4];
|
|
};
|
|
|
|
#endif
|