linux-stable/drivers/firmware/arm_scmi/sensors.c
Cristian Marussi 8e60294c80 firmware: arm_scmi: Fix SENSOR_AXIS_NAME_GET behaviour when unsupported
Avoid to invoke SENSOR_AXIS_NAME_GET on sensors that have not declared at
least one of their axes as supporting extended names.

Since the returned list of axes supporting extended names is not
necessarily comprising all the existing axes of the specified sensor,
take care also to properly pick the axis descriptor from the ID embedded
in the response.

Link: https://lore.kernel.org/r/20220608164051.2326087-1-cristian.marussi@arm.com
Fixes: 802b0bed01 ("firmware: arm_scmi: Add SCMI v3.1 SENSOR_AXIS_NAME_GET support")
Cc: Peter Hilber <peter.hilber@opensynergy.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Peter Hilber <peter.hilber@opensynergy.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-06-10 17:50:29 +01:00

1135 lines
30 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* System Control and Management Interface (SCMI) Sensor Protocol
*
* Copyright (C) 2018-2022 ARM Ltd.
*/
#define pr_fmt(fmt) "SCMI Notifications SENSOR - " fmt
#include <linux/bitfield.h>
#include <linux/module.h>
#include <linux/scmi_protocol.h>
#include "protocols.h"
#include "notify.h"
#define SCMI_MAX_NUM_SENSOR_AXIS 63
#define SCMIv2_SENSOR_PROTOCOL 0x10000
enum scmi_sensor_protocol_cmd {
SENSOR_DESCRIPTION_GET = 0x3,
SENSOR_TRIP_POINT_NOTIFY = 0x4,
SENSOR_TRIP_POINT_CONFIG = 0x5,
SENSOR_READING_GET = 0x6,
SENSOR_AXIS_DESCRIPTION_GET = 0x7,
SENSOR_LIST_UPDATE_INTERVALS = 0x8,
SENSOR_CONFIG_GET = 0x9,
SENSOR_CONFIG_SET = 0xA,
SENSOR_CONTINUOUS_UPDATE_NOTIFY = 0xB,
SENSOR_NAME_GET = 0xC,
SENSOR_AXIS_NAME_GET = 0xD,
};
struct scmi_msg_resp_sensor_attributes {
__le16 num_sensors;
u8 max_requests;
u8 reserved;
__le32 reg_addr_low;
__le32 reg_addr_high;
__le32 reg_size;
};
/* v3 attributes_low macros */
#define SUPPORTS_UPDATE_NOTIFY(x) FIELD_GET(BIT(30), (x))
#define SENSOR_TSTAMP_EXP(x) FIELD_GET(GENMASK(14, 10), (x))
#define SUPPORTS_TIMESTAMP(x) FIELD_GET(BIT(9), (x))
#define SUPPORTS_EXTEND_ATTRS(x) FIELD_GET(BIT(8), (x))
/* v2 attributes_high macros */
#define SENSOR_UPDATE_BASE(x) FIELD_GET(GENMASK(31, 27), (x))
#define SENSOR_UPDATE_SCALE(x) FIELD_GET(GENMASK(26, 22), (x))
/* v3 attributes_high macros */
#define SENSOR_AXIS_NUMBER(x) FIELD_GET(GENMASK(21, 16), (x))
#define SUPPORTS_AXIS(x) FIELD_GET(BIT(8), (x))
/* v3 resolution macros */
#define SENSOR_RES(x) FIELD_GET(GENMASK(26, 0), (x))
#define SENSOR_RES_EXP(x) FIELD_GET(GENMASK(31, 27), (x))
struct scmi_msg_resp_attrs {
__le32 min_range_low;
__le32 min_range_high;
__le32 max_range_low;
__le32 max_range_high;
};
struct scmi_msg_sensor_description {
__le32 desc_index;
};
struct scmi_msg_resp_sensor_description {
__le16 num_returned;
__le16 num_remaining;
struct scmi_sensor_descriptor {
__le32 id;
__le32 attributes_low;
/* Common attributes_low macros */
#define SUPPORTS_ASYNC_READ(x) FIELD_GET(BIT(31), (x))
#define SUPPORTS_EXTENDED_NAMES(x) FIELD_GET(BIT(29), (x))
#define NUM_TRIP_POINTS(x) FIELD_GET(GENMASK(7, 0), (x))
__le32 attributes_high;
/* Common attributes_high macros */
#define SENSOR_SCALE(x) FIELD_GET(GENMASK(15, 11), (x))
#define SENSOR_SCALE_SIGN BIT(4)
#define SENSOR_SCALE_EXTEND GENMASK(31, 5)
#define SENSOR_TYPE(x) FIELD_GET(GENMASK(7, 0), (x))
u8 name[SCMI_SHORT_NAME_MAX_SIZE];
/* only for version > 2.0 */
__le32 power;
__le32 resolution;
struct scmi_msg_resp_attrs scalar_attrs;
} desc[];
};
/* Base scmi_sensor_descriptor size excluding extended attrs after name */
#define SCMI_MSG_RESP_SENS_DESCR_BASE_SZ 28
/* Sign extend to a full s32 */
#define S32_EXT(v) \
({ \
int __v = (v); \
\
if (__v & SENSOR_SCALE_SIGN) \
__v |= SENSOR_SCALE_EXTEND; \
__v; \
})
struct scmi_msg_sensor_axis_description_get {
__le32 id;
__le32 axis_desc_index;
};
struct scmi_msg_resp_sensor_axis_description {
__le32 num_axis_flags;
#define NUM_AXIS_RETURNED(x) FIELD_GET(GENMASK(5, 0), (x))
#define NUM_AXIS_REMAINING(x) FIELD_GET(GENMASK(31, 26), (x))
struct scmi_axis_descriptor {
__le32 id;
__le32 attributes_low;
#define SUPPORTS_EXTENDED_AXIS_NAMES(x) FIELD_GET(BIT(9), (x))
__le32 attributes_high;
u8 name[SCMI_SHORT_NAME_MAX_SIZE];
__le32 resolution;
struct scmi_msg_resp_attrs attrs;
} desc[];
};
struct scmi_msg_resp_sensor_axis_names_description {
__le32 num_axis_flags;
struct scmi_sensor_axis_name_descriptor {
__le32 axis_id;
u8 name[SCMI_MAX_STR_SIZE];
} desc[];
};
/* Base scmi_axis_descriptor size excluding extended attrs after name */
#define SCMI_MSG_RESP_AXIS_DESCR_BASE_SZ 28
struct scmi_msg_sensor_list_update_intervals {
__le32 id;
__le32 index;
};
struct scmi_msg_resp_sensor_list_update_intervals {
__le32 num_intervals_flags;
#define NUM_INTERVALS_RETURNED(x) FIELD_GET(GENMASK(11, 0), (x))
#define SEGMENTED_INTVL_FORMAT(x) FIELD_GET(BIT(12), (x))
#define NUM_INTERVALS_REMAINING(x) FIELD_GET(GENMASK(31, 16), (x))
__le32 intervals[];
};
struct scmi_msg_sensor_request_notify {
__le32 id;
__le32 event_control;
#define SENSOR_NOTIFY_ALL BIT(0)
};
struct scmi_msg_set_sensor_trip_point {
__le32 id;
__le32 event_control;
#define SENSOR_TP_EVENT_MASK (0x3)
#define SENSOR_TP_DISABLED 0x0
#define SENSOR_TP_POSITIVE 0x1
#define SENSOR_TP_NEGATIVE 0x2
#define SENSOR_TP_BOTH 0x3
#define SENSOR_TP_ID(x) (((x) & 0xff) << 4)
__le32 value_low;
__le32 value_high;
};
struct scmi_msg_sensor_config_set {
__le32 id;
__le32 sensor_config;
};
struct scmi_msg_sensor_reading_get {
__le32 id;
__le32 flags;
#define SENSOR_READ_ASYNC BIT(0)
};
struct scmi_resp_sensor_reading_complete {
__le32 id;
__le32 readings_low;
__le32 readings_high;
};
struct scmi_sensor_reading_resp {
__le32 sensor_value_low;
__le32 sensor_value_high;
__le32 timestamp_low;
__le32 timestamp_high;
};
struct scmi_resp_sensor_reading_complete_v3 {
__le32 id;
struct scmi_sensor_reading_resp readings[];
};
struct scmi_sensor_trip_notify_payld {
__le32 agent_id;
__le32 sensor_id;
__le32 trip_point_desc;
};
struct scmi_sensor_update_notify_payld {
__le32 agent_id;
__le32 sensor_id;
struct scmi_sensor_reading_resp readings[];
};
struct sensors_info {
u32 version;
int num_sensors;
int max_requests;
u64 reg_addr;
u32 reg_size;
struct scmi_sensor_info *sensors;
};
static int scmi_sensor_attributes_get(const struct scmi_protocol_handle *ph,
struct sensors_info *si)
{
int ret;
struct scmi_xfer *t;
struct scmi_msg_resp_sensor_attributes *attr;
ret = ph->xops->xfer_get_init(ph, PROTOCOL_ATTRIBUTES,
0, sizeof(*attr), &t);
if (ret)
return ret;
attr = t->rx.buf;
ret = ph->xops->do_xfer(ph, t);
if (!ret) {
si->num_sensors = le16_to_cpu(attr->num_sensors);
si->max_requests = attr->max_requests;
si->reg_addr = le32_to_cpu(attr->reg_addr_low) |
(u64)le32_to_cpu(attr->reg_addr_high) << 32;
si->reg_size = le32_to_cpu(attr->reg_size);
}
ph->xops->xfer_put(ph, t);
return ret;
}
static inline void scmi_parse_range_attrs(struct scmi_range_attrs *out,
const struct scmi_msg_resp_attrs *in)
{
out->min_range = get_unaligned_le64((void *)&in->min_range_low);
out->max_range = get_unaligned_le64((void *)&in->max_range_low);
}
struct scmi_sens_ipriv {
void *priv;
struct device *dev;
};
static void iter_intervals_prepare_message(void *message,
unsigned int desc_index,
const void *p)
{
struct scmi_msg_sensor_list_update_intervals *msg = message;
const struct scmi_sensor_info *s;
s = ((const struct scmi_sens_ipriv *)p)->priv;
/* Set the number of sensors to be skipped/already read */
msg->id = cpu_to_le32(s->id);
msg->index = cpu_to_le32(desc_index);
}
static int iter_intervals_update_state(struct scmi_iterator_state *st,
const void *response, void *p)
{
u32 flags;
struct scmi_sensor_info *s = ((struct scmi_sens_ipriv *)p)->priv;
struct device *dev = ((struct scmi_sens_ipriv *)p)->dev;
const struct scmi_msg_resp_sensor_list_update_intervals *r = response;
flags = le32_to_cpu(r->num_intervals_flags);
st->num_returned = NUM_INTERVALS_RETURNED(flags);
st->num_remaining = NUM_INTERVALS_REMAINING(flags);
/*
* Max intervals is not declared previously anywhere so we
* assume it's returned+remaining on first call.
*/
if (!st->max_resources) {
s->intervals.segmented = SEGMENTED_INTVL_FORMAT(flags);
s->intervals.count = st->num_returned + st->num_remaining;
/* segmented intervals are reported in one triplet */
if (s->intervals.segmented &&
(st->num_remaining || st->num_returned != 3)) {
dev_err(dev,
"Sensor ID:%d advertises an invalid segmented interval (%d)\n",
s->id, s->intervals.count);
s->intervals.segmented = false;
s->intervals.count = 0;
return -EINVAL;
}
/* Direct allocation when exceeding pre-allocated */
if (s->intervals.count >= SCMI_MAX_PREALLOC_POOL) {
s->intervals.desc =
devm_kcalloc(dev,
s->intervals.count,
sizeof(*s->intervals.desc),
GFP_KERNEL);
if (!s->intervals.desc) {
s->intervals.segmented = false;
s->intervals.count = 0;
return -ENOMEM;
}
}
st->max_resources = s->intervals.count;
}
return 0;
}
static int
iter_intervals_process_response(const struct scmi_protocol_handle *ph,
const void *response,
struct scmi_iterator_state *st, void *p)
{
const struct scmi_msg_resp_sensor_list_update_intervals *r = response;
struct scmi_sensor_info *s = ((struct scmi_sens_ipriv *)p)->priv;
s->intervals.desc[st->desc_index + st->loop_idx] =
le32_to_cpu(r->intervals[st->loop_idx]);
return 0;
}
static int scmi_sensor_update_intervals(const struct scmi_protocol_handle *ph,
struct scmi_sensor_info *s)
{
void *iter;
struct scmi_iterator_ops ops = {
.prepare_message = iter_intervals_prepare_message,
.update_state = iter_intervals_update_state,
.process_response = iter_intervals_process_response,
};
struct scmi_sens_ipriv upriv = {
.priv = s,
.dev = ph->dev,
};
iter = ph->hops->iter_response_init(ph, &ops, s->intervals.count,
SENSOR_LIST_UPDATE_INTERVALS,
sizeof(struct scmi_msg_sensor_list_update_intervals),
&upriv);
if (IS_ERR(iter))
return PTR_ERR(iter);
return ph->hops->iter_response_run(iter);
}
struct scmi_apriv {
bool any_axes_support_extended_names;
struct scmi_sensor_info *s;
};
static void iter_axes_desc_prepare_message(void *message,
const unsigned int desc_index,
const void *priv)
{
struct scmi_msg_sensor_axis_description_get *msg = message;
const struct scmi_apriv *apriv = priv;
/* Set the number of sensors to be skipped/already read */
msg->id = cpu_to_le32(apriv->s->id);
msg->axis_desc_index = cpu_to_le32(desc_index);
}
static int
iter_axes_desc_update_state(struct scmi_iterator_state *st,
const void *response, void *priv)
{
u32 flags;
const struct scmi_msg_resp_sensor_axis_description *r = response;
flags = le32_to_cpu(r->num_axis_flags);
st->num_returned = NUM_AXIS_RETURNED(flags);
st->num_remaining = NUM_AXIS_REMAINING(flags);
st->priv = (void *)&r->desc[0];
return 0;
}
static int
iter_axes_desc_process_response(const struct scmi_protocol_handle *ph,
const void *response,
struct scmi_iterator_state *st, void *priv)
{
u32 attrh, attrl;
struct scmi_sensor_axis_info *a;
size_t dsize = SCMI_MSG_RESP_AXIS_DESCR_BASE_SZ;
struct scmi_apriv *apriv = priv;
const struct scmi_axis_descriptor *adesc = st->priv;
attrl = le32_to_cpu(adesc->attributes_low);
if (SUPPORTS_EXTENDED_AXIS_NAMES(attrl))
apriv->any_axes_support_extended_names = true;
a = &apriv->s->axis[st->desc_index + st->loop_idx];
a->id = le32_to_cpu(adesc->id);
a->extended_attrs = SUPPORTS_EXTEND_ATTRS(attrl);
attrh = le32_to_cpu(adesc->attributes_high);
a->scale = S32_EXT(SENSOR_SCALE(attrh));
a->type = SENSOR_TYPE(attrh);
strscpy(a->name, adesc->name, SCMI_MAX_STR_SIZE);
if (a->extended_attrs) {
unsigned int ares = le32_to_cpu(adesc->resolution);
a->resolution = SENSOR_RES(ares);
a->exponent = S32_EXT(SENSOR_RES_EXP(ares));
dsize += sizeof(adesc->resolution);
scmi_parse_range_attrs(&a->attrs, &adesc->attrs);
dsize += sizeof(adesc->attrs);
}
st->priv = ((u8 *)adesc + dsize);
return 0;
}
static int
iter_axes_extended_name_update_state(struct scmi_iterator_state *st,
const void *response, void *priv)
{
u32 flags;
const struct scmi_msg_resp_sensor_axis_names_description *r = response;
flags = le32_to_cpu(r->num_axis_flags);
st->num_returned = NUM_AXIS_RETURNED(flags);
st->num_remaining = NUM_AXIS_REMAINING(flags);
st->priv = (void *)&r->desc[0];
return 0;
}
static int
iter_axes_extended_name_process_response(const struct scmi_protocol_handle *ph,
const void *response,
struct scmi_iterator_state *st,
void *priv)
{
struct scmi_sensor_axis_info *a;
const struct scmi_apriv *apriv = priv;
struct scmi_sensor_axis_name_descriptor *adesc = st->priv;
u32 axis_id = le32_to_cpu(adesc->axis_id);
if (axis_id >= st->max_resources)
return -EPROTO;
/*
* Pick the corresponding descriptor based on the axis_id embedded
* in the reply since the list of axes supporting extended names
* can be a subset of all the axes.
*/
a = &apriv->s->axis[axis_id];
strscpy(a->name, adesc->name, SCMI_MAX_STR_SIZE);
st->priv = ++adesc;
return 0;
}
static int
scmi_sensor_axis_extended_names_get(const struct scmi_protocol_handle *ph,
struct scmi_sensor_info *s)
{
int ret;
void *iter;
struct scmi_iterator_ops ops = {
.prepare_message = iter_axes_desc_prepare_message,
.update_state = iter_axes_extended_name_update_state,
.process_response = iter_axes_extended_name_process_response,
};
struct scmi_apriv apriv = {
.any_axes_support_extended_names = false,
.s = s,
};
iter = ph->hops->iter_response_init(ph, &ops, s->num_axis,
SENSOR_AXIS_NAME_GET,
sizeof(struct scmi_msg_sensor_axis_description_get),
&apriv);
if (IS_ERR(iter))
return PTR_ERR(iter);
/*
* Do not cause whole protocol initialization failure when failing to
* get extended names for axes.
*/
ret = ph->hops->iter_response_run(iter);
if (ret)
dev_warn(ph->dev,
"Failed to get axes extended names for %s (ret:%d).\n",
s->name, ret);
return 0;
}
static int scmi_sensor_axis_description(const struct scmi_protocol_handle *ph,
struct scmi_sensor_info *s,
u32 version)
{
int ret;
void *iter;
struct scmi_iterator_ops ops = {
.prepare_message = iter_axes_desc_prepare_message,
.update_state = iter_axes_desc_update_state,
.process_response = iter_axes_desc_process_response,
};
struct scmi_apriv apriv = {
.any_axes_support_extended_names = false,
.s = s,
};
s->axis = devm_kcalloc(ph->dev, s->num_axis,
sizeof(*s->axis), GFP_KERNEL);
if (!s->axis)
return -ENOMEM;
iter = ph->hops->iter_response_init(ph, &ops, s->num_axis,
SENSOR_AXIS_DESCRIPTION_GET,
sizeof(struct scmi_msg_sensor_axis_description_get),
&apriv);
if (IS_ERR(iter))
return PTR_ERR(iter);
ret = ph->hops->iter_response_run(iter);
if (ret)
return ret;
if (PROTOCOL_REV_MAJOR(version) >= 0x3 &&
apriv.any_axes_support_extended_names)
ret = scmi_sensor_axis_extended_names_get(ph, s);
return ret;
}
static void iter_sens_descr_prepare_message(void *message,
unsigned int desc_index,
const void *priv)
{
struct scmi_msg_sensor_description *msg = message;
msg->desc_index = cpu_to_le32(desc_index);
}
static int iter_sens_descr_update_state(struct scmi_iterator_state *st,
const void *response, void *priv)
{
const struct scmi_msg_resp_sensor_description *r = response;
st->num_returned = le16_to_cpu(r->num_returned);
st->num_remaining = le16_to_cpu(r->num_remaining);
st->priv = (void *)&r->desc[0];
return 0;
}
static int
iter_sens_descr_process_response(const struct scmi_protocol_handle *ph,
const void *response,
struct scmi_iterator_state *st, void *priv)
{
int ret = 0;
u32 attrh, attrl;
size_t dsize = SCMI_MSG_RESP_SENS_DESCR_BASE_SZ;
struct scmi_sensor_info *s;
struct sensors_info *si = priv;
const struct scmi_sensor_descriptor *sdesc = st->priv;
s = &si->sensors[st->desc_index + st->loop_idx];
s->id = le32_to_cpu(sdesc->id);
attrl = le32_to_cpu(sdesc->attributes_low);
/* common bitfields parsing */
s->async = SUPPORTS_ASYNC_READ(attrl);
s->num_trip_points = NUM_TRIP_POINTS(attrl);
/**
* only SCMIv3.0 specific bitfield below.
* Such bitfields are assumed to be zeroed on non
* relevant fw versions...assuming fw not buggy !
*/
s->update = SUPPORTS_UPDATE_NOTIFY(attrl);
s->timestamped = SUPPORTS_TIMESTAMP(attrl);
if (s->timestamped)
s->tstamp_scale = S32_EXT(SENSOR_TSTAMP_EXP(attrl));
s->extended_scalar_attrs = SUPPORTS_EXTEND_ATTRS(attrl);
attrh = le32_to_cpu(sdesc->attributes_high);
/* common bitfields parsing */
s->scale = S32_EXT(SENSOR_SCALE(attrh));
s->type = SENSOR_TYPE(attrh);
/* Use pre-allocated pool wherever possible */
s->intervals.desc = s->intervals.prealloc_pool;
if (si->version == SCMIv2_SENSOR_PROTOCOL) {
s->intervals.segmented = false;
s->intervals.count = 1;
/*
* Convert SCMIv2.0 update interval format to
* SCMIv3.0 to be used as the common exposed
* descriptor, accessible via common macros.
*/
s->intervals.desc[0] = (SENSOR_UPDATE_BASE(attrh) << 5) |
SENSOR_UPDATE_SCALE(attrh);
} else {
/*
* From SCMIv3.0 update intervals are retrieved
* via a dedicated (optional) command.
* Since the command is optional, on error carry
* on without any update interval.
*/
if (scmi_sensor_update_intervals(ph, s))
dev_dbg(ph->dev,
"Update Intervals not available for sensor ID:%d\n",
s->id);
}
/**
* only > SCMIv2.0 specific bitfield below.
* Such bitfields are assumed to be zeroed on non
* relevant fw versions...assuming fw not buggy !
*/
s->num_axis = min_t(unsigned int,
SUPPORTS_AXIS(attrh) ?
SENSOR_AXIS_NUMBER(attrh) : 0,
SCMI_MAX_NUM_SENSOR_AXIS);
strscpy(s->name, sdesc->name, SCMI_MAX_STR_SIZE);
/*
* If supported overwrite short name with the extended
* one; on error just carry on and use already provided
* short name.
*/
if (PROTOCOL_REV_MAJOR(si->version) >= 0x3 &&
SUPPORTS_EXTENDED_NAMES(attrl))
ph->hops->extended_name_get(ph, SENSOR_NAME_GET, s->id,
s->name, SCMI_MAX_STR_SIZE);
if (s->extended_scalar_attrs) {
s->sensor_power = le32_to_cpu(sdesc->power);
dsize += sizeof(sdesc->power);
/* Only for sensors reporting scalar values */
if (s->num_axis == 0) {
unsigned int sres = le32_to_cpu(sdesc->resolution);
s->resolution = SENSOR_RES(sres);
s->exponent = S32_EXT(SENSOR_RES_EXP(sres));
dsize += sizeof(sdesc->resolution);
scmi_parse_range_attrs(&s->scalar_attrs,
&sdesc->scalar_attrs);
dsize += sizeof(sdesc->scalar_attrs);
}
}
if (s->num_axis > 0)
ret = scmi_sensor_axis_description(ph, s, si->version);
st->priv = ((u8 *)sdesc + dsize);
return ret;
}
static int scmi_sensor_description_get(const struct scmi_protocol_handle *ph,
struct sensors_info *si)
{
void *iter;
struct scmi_iterator_ops ops = {
.prepare_message = iter_sens_descr_prepare_message,
.update_state = iter_sens_descr_update_state,
.process_response = iter_sens_descr_process_response,
};
iter = ph->hops->iter_response_init(ph, &ops, si->num_sensors,
SENSOR_DESCRIPTION_GET,
sizeof(__le32), si);
if (IS_ERR(iter))
return PTR_ERR(iter);
return ph->hops->iter_response_run(iter);
}
static inline int
scmi_sensor_request_notify(const struct scmi_protocol_handle *ph, u32 sensor_id,
u8 message_id, bool enable)
{
int ret;
u32 evt_cntl = enable ? SENSOR_NOTIFY_ALL : 0;
struct scmi_xfer *t;
struct scmi_msg_sensor_request_notify *cfg;
ret = ph->xops->xfer_get_init(ph, message_id, sizeof(*cfg), 0, &t);
if (ret)
return ret;
cfg = t->tx.buf;
cfg->id = cpu_to_le32(sensor_id);
cfg->event_control = cpu_to_le32(evt_cntl);
ret = ph->xops->do_xfer(ph, t);
ph->xops->xfer_put(ph, t);
return ret;
}
static int scmi_sensor_trip_point_notify(const struct scmi_protocol_handle *ph,
u32 sensor_id, bool enable)
{
return scmi_sensor_request_notify(ph, sensor_id,
SENSOR_TRIP_POINT_NOTIFY,
enable);
}
static int
scmi_sensor_continuous_update_notify(const struct scmi_protocol_handle *ph,
u32 sensor_id, bool enable)
{
return scmi_sensor_request_notify(ph, sensor_id,
SENSOR_CONTINUOUS_UPDATE_NOTIFY,
enable);
}
static int
scmi_sensor_trip_point_config(const struct scmi_protocol_handle *ph,
u32 sensor_id, u8 trip_id, u64 trip_value)
{
int ret;
u32 evt_cntl = SENSOR_TP_BOTH;
struct scmi_xfer *t;
struct scmi_msg_set_sensor_trip_point *trip;
ret = ph->xops->xfer_get_init(ph, SENSOR_TRIP_POINT_CONFIG,
sizeof(*trip), 0, &t);
if (ret)
return ret;
trip = t->tx.buf;
trip->id = cpu_to_le32(sensor_id);
trip->event_control = cpu_to_le32(evt_cntl | SENSOR_TP_ID(trip_id));
trip->value_low = cpu_to_le32(trip_value & 0xffffffff);
trip->value_high = cpu_to_le32(trip_value >> 32);
ret = ph->xops->do_xfer(ph, t);
ph->xops->xfer_put(ph, t);
return ret;
}
static int scmi_sensor_config_get(const struct scmi_protocol_handle *ph,
u32 sensor_id, u32 *sensor_config)
{
int ret;
struct scmi_xfer *t;
ret = ph->xops->xfer_get_init(ph, SENSOR_CONFIG_GET,
sizeof(__le32), sizeof(__le32), &t);
if (ret)
return ret;
put_unaligned_le32(sensor_id, t->tx.buf);
ret = ph->xops->do_xfer(ph, t);
if (!ret) {
struct sensors_info *si = ph->get_priv(ph);
struct scmi_sensor_info *s = si->sensors + sensor_id;
*sensor_config = get_unaligned_le64(t->rx.buf);
s->sensor_config = *sensor_config;
}
ph->xops->xfer_put(ph, t);
return ret;
}
static int scmi_sensor_config_set(const struct scmi_protocol_handle *ph,
u32 sensor_id, u32 sensor_config)
{
int ret;
struct scmi_xfer *t;
struct scmi_msg_sensor_config_set *msg;
ret = ph->xops->xfer_get_init(ph, SENSOR_CONFIG_SET,
sizeof(*msg), 0, &t);
if (ret)
return ret;
msg = t->tx.buf;
msg->id = cpu_to_le32(sensor_id);
msg->sensor_config = cpu_to_le32(sensor_config);
ret = ph->xops->do_xfer(ph, t);
if (!ret) {
struct sensors_info *si = ph->get_priv(ph);
struct scmi_sensor_info *s = si->sensors + sensor_id;
s->sensor_config = sensor_config;
}
ph->xops->xfer_put(ph, t);
return ret;
}
/**
* scmi_sensor_reading_get - Read scalar sensor value
* @ph: Protocol handle
* @sensor_id: Sensor ID
* @value: The 64bit value sensor reading
*
* This function returns a single 64 bit reading value representing the sensor
* value; if the platform SCMI Protocol implementation and the sensor support
* multiple axis and timestamped-reads, this just returns the first axis while
* dropping the timestamp value.
* Use instead the @scmi_sensor_reading_get_timestamped to retrieve the array of
* timestamped multi-axis values.
*
* Return: 0 on Success
*/
static int scmi_sensor_reading_get(const struct scmi_protocol_handle *ph,
u32 sensor_id, u64 *value)
{
int ret;
struct scmi_xfer *t;
struct scmi_msg_sensor_reading_get *sensor;
struct sensors_info *si = ph->get_priv(ph);
struct scmi_sensor_info *s = si->sensors + sensor_id;
ret = ph->xops->xfer_get_init(ph, SENSOR_READING_GET,
sizeof(*sensor), 0, &t);
if (ret)
return ret;
sensor = t->tx.buf;
sensor->id = cpu_to_le32(sensor_id);
if (s->async) {
sensor->flags = cpu_to_le32(SENSOR_READ_ASYNC);
ret = ph->xops->do_xfer_with_response(ph, t);
if (!ret) {
struct scmi_resp_sensor_reading_complete *resp;
resp = t->rx.buf;
if (le32_to_cpu(resp->id) == sensor_id)
*value =
get_unaligned_le64(&resp->readings_low);
else
ret = -EPROTO;
}
} else {
sensor->flags = cpu_to_le32(0);
ret = ph->xops->do_xfer(ph, t);
if (!ret)
*value = get_unaligned_le64(t->rx.buf);
}
ph->xops->xfer_put(ph, t);
return ret;
}
static inline void
scmi_parse_sensor_readings(struct scmi_sensor_reading *out,
const struct scmi_sensor_reading_resp *in)
{
out->value = get_unaligned_le64((void *)&in->sensor_value_low);
out->timestamp = get_unaligned_le64((void *)&in->timestamp_low);
}
/**
* scmi_sensor_reading_get_timestamped - Read multiple-axis timestamped values
* @ph: Protocol handle
* @sensor_id: Sensor ID
* @count: The length of the provided @readings array
* @readings: An array of elements each representing a timestamped per-axis
* reading of type @struct scmi_sensor_reading.
* Returned readings are ordered as the @axis descriptors array
* included in @struct scmi_sensor_info and the max number of
* returned elements is min(@count, @num_axis); ideally the provided
* array should be of length @count equal to @num_axis.
*
* Return: 0 on Success
*/
static int
scmi_sensor_reading_get_timestamped(const struct scmi_protocol_handle *ph,
u32 sensor_id, u8 count,
struct scmi_sensor_reading *readings)
{
int ret;
struct scmi_xfer *t;
struct scmi_msg_sensor_reading_get *sensor;
struct sensors_info *si = ph->get_priv(ph);
struct scmi_sensor_info *s = si->sensors + sensor_id;
if (!count || !readings ||
(!s->num_axis && count > 1) || (s->num_axis && count > s->num_axis))
return -EINVAL;
ret = ph->xops->xfer_get_init(ph, SENSOR_READING_GET,
sizeof(*sensor), 0, &t);
if (ret)
return ret;
sensor = t->tx.buf;
sensor->id = cpu_to_le32(sensor_id);
if (s->async) {
sensor->flags = cpu_to_le32(SENSOR_READ_ASYNC);
ret = ph->xops->do_xfer_with_response(ph, t);
if (!ret) {
int i;
struct scmi_resp_sensor_reading_complete_v3 *resp;
resp = t->rx.buf;
/* Retrieve only the number of requested axis anyway */
if (le32_to_cpu(resp->id) == sensor_id)
for (i = 0; i < count; i++)
scmi_parse_sensor_readings(&readings[i],
&resp->readings[i]);
else
ret = -EPROTO;
}
} else {
sensor->flags = cpu_to_le32(0);
ret = ph->xops->do_xfer(ph, t);
if (!ret) {
int i;
struct scmi_sensor_reading_resp *resp_readings;
resp_readings = t->rx.buf;
for (i = 0; i < count; i++)
scmi_parse_sensor_readings(&readings[i],
&resp_readings[i]);
}
}
ph->xops->xfer_put(ph, t);
return ret;
}
static const struct scmi_sensor_info *
scmi_sensor_info_get(const struct scmi_protocol_handle *ph, u32 sensor_id)
{
struct sensors_info *si = ph->get_priv(ph);
return si->sensors + sensor_id;
}
static int scmi_sensor_count_get(const struct scmi_protocol_handle *ph)
{
struct sensors_info *si = ph->get_priv(ph);
return si->num_sensors;
}
static const struct scmi_sensor_proto_ops sensor_proto_ops = {
.count_get = scmi_sensor_count_get,
.info_get = scmi_sensor_info_get,
.trip_point_config = scmi_sensor_trip_point_config,
.reading_get = scmi_sensor_reading_get,
.reading_get_timestamped = scmi_sensor_reading_get_timestamped,
.config_get = scmi_sensor_config_get,
.config_set = scmi_sensor_config_set,
};
static int scmi_sensor_set_notify_enabled(const struct scmi_protocol_handle *ph,
u8 evt_id, u32 src_id, bool enable)
{
int ret;
switch (evt_id) {
case SCMI_EVENT_SENSOR_TRIP_POINT_EVENT:
ret = scmi_sensor_trip_point_notify(ph, src_id, enable);
break;
case SCMI_EVENT_SENSOR_UPDATE:
ret = scmi_sensor_continuous_update_notify(ph, src_id, enable);
break;
default:
ret = -EINVAL;
break;
}
if (ret)
pr_debug("FAIL_ENABLED - evt[%X] dom[%d] - ret:%d\n",
evt_id, src_id, ret);
return ret;
}
static void *
scmi_sensor_fill_custom_report(const struct scmi_protocol_handle *ph,
u8 evt_id, ktime_t timestamp,
const void *payld, size_t payld_sz,
void *report, u32 *src_id)
{
void *rep = NULL;
switch (evt_id) {
case SCMI_EVENT_SENSOR_TRIP_POINT_EVENT:
{
const struct scmi_sensor_trip_notify_payld *p = payld;
struct scmi_sensor_trip_point_report *r = report;
if (sizeof(*p) != payld_sz)
break;
r->timestamp = timestamp;
r->agent_id = le32_to_cpu(p->agent_id);
r->sensor_id = le32_to_cpu(p->sensor_id);
r->trip_point_desc = le32_to_cpu(p->trip_point_desc);
*src_id = r->sensor_id;
rep = r;
break;
}
case SCMI_EVENT_SENSOR_UPDATE:
{
int i;
struct scmi_sensor_info *s;
const struct scmi_sensor_update_notify_payld *p = payld;
struct scmi_sensor_update_report *r = report;
struct sensors_info *sinfo = ph->get_priv(ph);
/* payld_sz is variable for this event */
r->sensor_id = le32_to_cpu(p->sensor_id);
if (r->sensor_id >= sinfo->num_sensors)
break;
r->timestamp = timestamp;
r->agent_id = le32_to_cpu(p->agent_id);
s = &sinfo->sensors[r->sensor_id];
/*
* The generated report r (@struct scmi_sensor_update_report)
* was pre-allocated to contain up to SCMI_MAX_NUM_SENSOR_AXIS
* readings: here it is filled with the effective @num_axis
* readings defined for this sensor or 1 for scalar sensors.
*/
r->readings_count = s->num_axis ?: 1;
for (i = 0; i < r->readings_count; i++)
scmi_parse_sensor_readings(&r->readings[i],
&p->readings[i]);
*src_id = r->sensor_id;
rep = r;
break;
}
default:
break;
}
return rep;
}
static int scmi_sensor_get_num_sources(const struct scmi_protocol_handle *ph)
{
struct sensors_info *si = ph->get_priv(ph);
return si->num_sensors;
}
static const struct scmi_event sensor_events[] = {
{
.id = SCMI_EVENT_SENSOR_TRIP_POINT_EVENT,
.max_payld_sz = sizeof(struct scmi_sensor_trip_notify_payld),
.max_report_sz = sizeof(struct scmi_sensor_trip_point_report),
},
{
.id = SCMI_EVENT_SENSOR_UPDATE,
.max_payld_sz =
sizeof(struct scmi_sensor_update_notify_payld) +
SCMI_MAX_NUM_SENSOR_AXIS *
sizeof(struct scmi_sensor_reading_resp),
.max_report_sz = sizeof(struct scmi_sensor_update_report) +
SCMI_MAX_NUM_SENSOR_AXIS *
sizeof(struct scmi_sensor_reading),
},
};
static const struct scmi_event_ops sensor_event_ops = {
.get_num_sources = scmi_sensor_get_num_sources,
.set_notify_enabled = scmi_sensor_set_notify_enabled,
.fill_custom_report = scmi_sensor_fill_custom_report,
};
static const struct scmi_protocol_events sensor_protocol_events = {
.queue_sz = SCMI_PROTO_QUEUE_SZ,
.ops = &sensor_event_ops,
.evts = sensor_events,
.num_events = ARRAY_SIZE(sensor_events),
};
static int scmi_sensors_protocol_init(const struct scmi_protocol_handle *ph)
{
u32 version;
int ret;
struct sensors_info *sinfo;
ret = ph->xops->version_get(ph, &version);
if (ret)
return ret;
dev_dbg(ph->dev, "Sensor Version %d.%d\n",
PROTOCOL_REV_MAJOR(version), PROTOCOL_REV_MINOR(version));
sinfo = devm_kzalloc(ph->dev, sizeof(*sinfo), GFP_KERNEL);
if (!sinfo)
return -ENOMEM;
sinfo->version = version;
ret = scmi_sensor_attributes_get(ph, sinfo);
if (ret)
return ret;
sinfo->sensors = devm_kcalloc(ph->dev, sinfo->num_sensors,
sizeof(*sinfo->sensors), GFP_KERNEL);
if (!sinfo->sensors)
return -ENOMEM;
ret = scmi_sensor_description_get(ph, sinfo);
if (ret)
return ret;
return ph->set_priv(ph, sinfo);
}
static const struct scmi_protocol scmi_sensors = {
.id = SCMI_PROTOCOL_SENSOR,
.owner = THIS_MODULE,
.instance_init = &scmi_sensors_protocol_init,
.ops = &sensor_proto_ops,
.events = &sensor_protocol_events,
};
DEFINE_SCMI_PROTOCOL_REGISTER_UNREGISTER(sensors, scmi_sensors)