linux-stable/sound/usb/mixer_s1810c.c
Alexander Tsoy 5ff40e6d0f ALSA: usb-audio: Fix some typos
Fix the following typos in comments and in the code:
 - KHz -> kHz
 - procssed -> processed

Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20200629032607.255419-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-06-30 19:48:18 +02:00

595 lines
15 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Presonus Studio 1810c driver for ALSA
* Copyright (C) 2019 Nick Kossifidis <mickflemm@gmail.com>
*
* Based on reverse engineering of the communication protocol
* between the windows driver / Univeral Control (UC) program
* and the device, through usbmon.
*
* For now this bypasses the mixer, with all channels split,
* so that the software can mix with greater flexibility.
* It also adds controls for the 4 buttons on the front of
* the device.
*/
#include <linux/usb.h>
#include <linux/usb/audio-v2.h>
#include <linux/slab.h>
#include <sound/core.h>
#include <sound/control.h>
#include "usbaudio.h"
#include "mixer.h"
#include "mixer_quirks.h"
#include "helper.h"
#include "mixer_s1810c.h"
#define SC1810C_CMD_REQ 160
#define SC1810C_CMD_REQTYPE \
(USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT)
#define SC1810C_CMD_F1 0x50617269
#define SC1810C_CMD_F2 0x14
/*
* DISCLAIMER: These are just guesses based on the
* dumps I got.
*
* It seems like a selects between
* device (0), mixer (0x64) and output (0x65)
*
* For mixer (0x64):
* * b selects an input channel (see below).
* * c selects an output channel pair (see below).
* * d selects left (0) or right (1) of that pair.
* * e 0-> disconnect, 0x01000000-> connect,
* 0x0109-> used for stereo-linking channels,
* e is also used for setting volume levels
* in which case b is also set so I guess
* this way it is possible to set the volume
* level from the specified input to the
* specified output.
*
* IN Channels:
* 0 - 7 Mic/Inst/Line (Analog inputs)
* 8 - 9 S/PDIF
* 10 - 17 ADAT
* 18 - 35 DAW (Inputs from the host)
*
* OUT Channels (pairs):
* 0 -> Main out
* 1 -> Line1/2
* 2 -> Line3/4
* 3 -> S/PDIF
* 4 -> ADAT?
*
* For device (0):
* * b and c are not used, at least not on the
* dumps I got.
* * d sets the control id to be modified
* (see below).
* * e sets the setting for that control.
* (so for the switches I was interested
* in it's 0/1)
*
* For output (0x65):
* * b is the output channel (see above).
* * c is zero.
* * e I guess the same as with mixer except 0x0109
* which I didn't see in my dumps.
*
* The two fixed fields have the same values for
* mixer and output but a different set for device.
*/
struct s1810c_ctl_packet {
u32 a;
u32 b;
u32 fixed1;
u32 fixed2;
u32 c;
u32 d;
u32 e;
};
#define SC1810C_CTL_LINE_SW 0
#define SC1810C_CTL_MUTE_SW 1
#define SC1810C_CTL_AB_SW 3
#define SC1810C_CTL_48V_SW 4
#define SC1810C_SET_STATE_REQ 161
#define SC1810C_SET_STATE_REQTYPE SC1810C_CMD_REQTYPE
#define SC1810C_SET_STATE_F1 0x64656D73
#define SC1810C_SET_STATE_F2 0xF4
#define SC1810C_GET_STATE_REQ 162
#define SC1810C_GET_STATE_REQTYPE \
(USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN)
#define SC1810C_GET_STATE_F1 SC1810C_SET_STATE_F1
#define SC1810C_GET_STATE_F2 SC1810C_SET_STATE_F2
#define SC1810C_STATE_F1_IDX 2
#define SC1810C_STATE_F2_IDX 3
/*
* This packet includes mixer volumes and
* various other fields, it's an extended
* version of ctl_packet, with a and b
* being zero and different f1/f2.
*/
struct s1810c_state_packet {
u32 fields[63];
};
#define SC1810C_STATE_48V_SW 58
#define SC1810C_STATE_LINE_SW 59
#define SC1810C_STATE_MUTE_SW 60
#define SC1810C_STATE_AB_SW 62
struct s1810_mixer_state {
uint16_t seqnum;
struct mutex usb_mutex;
struct mutex data_mutex;
};
static int
snd_s1810c_send_ctl_packet(struct usb_device *dev, u32 a,
u32 b, u32 c, u32 d, u32 e)
{
struct s1810c_ctl_packet pkt = { 0 };
int ret = 0;
pkt.fixed1 = SC1810C_CMD_F1;
pkt.fixed2 = SC1810C_CMD_F2;
pkt.a = a;
pkt.b = b;
pkt.c = c;
pkt.d = d;
/*
* Value for settings 0/1 for this
* output channel is always 0 (probably because
* there is no ADAT output on 1810c)
*/
pkt.e = (c == 4) ? 0 : e;
ret = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
SC1810C_CMD_REQ,
SC1810C_CMD_REQTYPE, 0, 0, &pkt, sizeof(pkt));
if (ret < 0) {
dev_warn(&dev->dev, "could not send ctl packet\n");
return ret;
}
return 0;
}
/*
* When opening Universal Control the program periodicaly
* sends and receives state packets for syncinc state between
* the device and the host.
*
* Note that if we send only the request to get data back we'll
* get an error, we need to first send an empty state packet and
* then ask to receive a filled. Their seqnumbers must also match.
*/
static int
snd_sc1810c_get_status_field(struct usb_device *dev,
u32 *field, int field_idx, uint16_t *seqnum)
{
struct s1810c_state_packet pkt_out = { { 0 } };
struct s1810c_state_packet pkt_in = { { 0 } };
int ret = 0;
pkt_out.fields[SC1810C_STATE_F1_IDX] = SC1810C_SET_STATE_F1;
pkt_out.fields[SC1810C_STATE_F2_IDX] = SC1810C_SET_STATE_F2;
ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
SC1810C_SET_STATE_REQ,
SC1810C_SET_STATE_REQTYPE,
(*seqnum), 0, &pkt_out, sizeof(pkt_out));
if (ret < 0) {
dev_warn(&dev->dev, "could not send state packet (%d)\n", ret);
return ret;
}
ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
SC1810C_GET_STATE_REQ,
SC1810C_GET_STATE_REQTYPE,
(*seqnum), 0, &pkt_in, sizeof(pkt_in));
if (ret < 0) {
dev_warn(&dev->dev, "could not get state field %u (%d)\n",
field_idx, ret);
return ret;
}
(*field) = pkt_in.fields[field_idx];
(*seqnum)++;
return 0;
}
/*
* This is what I got when bypassing the mixer with
* all channels split. I'm not 100% sure of what's going
* on, I could probably clean this up based on my observations
* but I prefer to keep the same behavior as the windows driver.
*/
static int snd_s1810c_init_mixer_maps(struct snd_usb_audio *chip)
{
u32 a, b, c, e, n, off;
struct usb_device *dev = chip->dev;
/* Set initial volume levels ? */
a = 0x64;
e = 0xbc;
for (n = 0; n < 2; n++) {
off = n * 18;
for (b = off, c = 0; b < 18 + off; b++) {
/* This channel to all outputs ? */
for (c = 0; c <= 8; c++) {
snd_s1810c_send_ctl_packet(dev, a, b, c, 0, e);
snd_s1810c_send_ctl_packet(dev, a, b, c, 1, e);
}
/* This channel to main output (again) */
snd_s1810c_send_ctl_packet(dev, a, b, 0, 0, e);
snd_s1810c_send_ctl_packet(dev, a, b, 0, 1, e);
}
/*
* I noticed on UC that DAW channels have different
* initial volumes, so this makes sense.
*/
e = 0xb53bf0;
}
/* Connect analog outputs ? */
a = 0x65;
e = 0x01000000;
for (b = 1; b < 3; b++) {
snd_s1810c_send_ctl_packet(dev, a, b, 0, 0, e);
snd_s1810c_send_ctl_packet(dev, a, b, 0, 1, e);
}
snd_s1810c_send_ctl_packet(dev, a, 0, 0, 0, e);
snd_s1810c_send_ctl_packet(dev, a, 0, 0, 1, e);
/* Set initial volume levels for S/PDIF mappings ? */
a = 0x64;
e = 0xbc;
c = 3;
for (n = 0; n < 2; n++) {
off = n * 18;
for (b = off; b < 18 + off; b++) {
snd_s1810c_send_ctl_packet(dev, a, b, c, 0, e);
snd_s1810c_send_ctl_packet(dev, a, b, c, 1, e);
}
e = 0xb53bf0;
}
/* Connect S/PDIF output ? */
a = 0x65;
e = 0x01000000;
snd_s1810c_send_ctl_packet(dev, a, 3, 0, 0, e);
snd_s1810c_send_ctl_packet(dev, a, 3, 0, 1, e);
/* Connect all outputs (again) ? */
a = 0x65;
e = 0x01000000;
for (b = 0; b < 4; b++) {
snd_s1810c_send_ctl_packet(dev, a, b, 0, 0, e);
snd_s1810c_send_ctl_packet(dev, a, b, 0, 1, e);
}
/* Basic routing to get sound out of the device */
a = 0x64;
e = 0x01000000;
for (c = 0; c < 4; c++) {
for (b = 0; b < 36; b++) {
if ((c == 0 && b == 18) || /* DAW1/2 -> Main */
(c == 1 && b == 20) || /* DAW3/4 -> Line3/4 */
(c == 2 && b == 22) || /* DAW4/5 -> Line5/6 */
(c == 3 && b == 24)) { /* DAW5/6 -> S/PDIF */
/* Left */
snd_s1810c_send_ctl_packet(dev, a, b, c, 0, e);
snd_s1810c_send_ctl_packet(dev, a, b, c, 1, 0);
b++;
/* Right */
snd_s1810c_send_ctl_packet(dev, a, b, c, 0, 0);
snd_s1810c_send_ctl_packet(dev, a, b, c, 1, e);
} else {
/* Leave the rest disconnected */
snd_s1810c_send_ctl_packet(dev, a, b, c, 0, 0);
snd_s1810c_send_ctl_packet(dev, a, b, c, 1, 0);
}
}
}
/* Set initial volume levels for S/PDIF (again) ? */
a = 0x64;
e = 0xbc;
c = 3;
for (n = 0; n < 2; n++) {
off = n * 18;
for (b = off; b < 18 + off; b++) {
snd_s1810c_send_ctl_packet(dev, a, b, c, 0, e);
snd_s1810c_send_ctl_packet(dev, a, b, c, 1, e);
}
e = 0xb53bf0;
}
/* Connect S/PDIF outputs (again) ? */
a = 0x65;
e = 0x01000000;
snd_s1810c_send_ctl_packet(dev, a, 3, 0, 0, e);
snd_s1810c_send_ctl_packet(dev, a, 3, 0, 1, e);
/* Again ? */
snd_s1810c_send_ctl_packet(dev, a, 3, 0, 0, e);
snd_s1810c_send_ctl_packet(dev, a, 3, 0, 1, e);
return 0;
}
/*
* Sync state with the device and retrieve the requested field,
* whose index is specified in (kctl->private_value & 0xFF),
* from the received fields array.
*/
static int
snd_s1810c_get_switch_state(struct usb_mixer_interface *mixer,
struct snd_kcontrol *kctl, u32 *state)
{
struct snd_usb_audio *chip = mixer->chip;
struct s1810_mixer_state *private = mixer->private_data;
u32 field = 0;
u32 ctl_idx = (u32) (kctl->private_value & 0xFF);
int ret = 0;
mutex_lock(&private->usb_mutex);
ret = snd_sc1810c_get_status_field(chip->dev, &field,
ctl_idx, &private->seqnum);
if (ret < 0)
goto unlock;
*state = field;
unlock:
mutex_unlock(&private->usb_mutex);
return ret ? ret : 0;
}
/*
* Send a control packet to the device for the control id
* specified in (kctl->private_value >> 8) with value
* specified in (kctl->private_value >> 16).
*/
static int
snd_s1810c_set_switch_state(struct usb_mixer_interface *mixer,
struct snd_kcontrol *kctl)
{
struct snd_usb_audio *chip = mixer->chip;
struct s1810_mixer_state *private = mixer->private_data;
u32 pval = (u32) kctl->private_value;
u32 ctl_id = (pval >> 8) & 0xFF;
u32 ctl_val = (pval >> 16) & 0x1;
int ret = 0;
mutex_lock(&private->usb_mutex);
ret = snd_s1810c_send_ctl_packet(chip->dev, 0, 0, 0, ctl_id, ctl_val);
mutex_unlock(&private->usb_mutex);
return ret;
}
/* Generic get/set/init functions for switch controls */
static int
snd_s1810c_switch_get(struct snd_kcontrol *kctl,
struct snd_ctl_elem_value *ctl_elem)
{
struct usb_mixer_elem_list *list = snd_kcontrol_chip(kctl);
struct usb_mixer_interface *mixer = list->mixer;
struct s1810_mixer_state *private = mixer->private_data;
u32 pval = (u32) kctl->private_value;
u32 ctl_idx = pval & 0xFF;
u32 state = 0;
int ret = 0;
mutex_lock(&private->data_mutex);
ret = snd_s1810c_get_switch_state(mixer, kctl, &state);
if (ret < 0)
goto unlock;
switch (ctl_idx) {
case SC1810C_STATE_LINE_SW:
case SC1810C_STATE_AB_SW:
ctl_elem->value.enumerated.item[0] = (int)state;
break;
default:
ctl_elem->value.integer.value[0] = (long)state;
}
unlock:
mutex_unlock(&private->data_mutex);
return (ret < 0) ? ret : 0;
}
static int
snd_s1810c_switch_set(struct snd_kcontrol *kctl,
struct snd_ctl_elem_value *ctl_elem)
{
struct usb_mixer_elem_list *list = snd_kcontrol_chip(kctl);
struct usb_mixer_interface *mixer = list->mixer;
struct s1810_mixer_state *private = mixer->private_data;
u32 pval = (u32) kctl->private_value;
u32 ctl_idx = pval & 0xFF;
u32 curval = 0;
u32 newval = 0;
int ret = 0;
mutex_lock(&private->data_mutex);
ret = snd_s1810c_get_switch_state(mixer, kctl, &curval);
if (ret < 0)
goto unlock;
switch (ctl_idx) {
case SC1810C_STATE_LINE_SW:
case SC1810C_STATE_AB_SW:
newval = (u32) ctl_elem->value.enumerated.item[0];
break;
default:
newval = (u32) ctl_elem->value.integer.value[0];
}
if (curval == newval)
goto unlock;
kctl->private_value &= ~(0x1 << 16);
kctl->private_value |= (unsigned int)(newval & 0x1) << 16;
ret = snd_s1810c_set_switch_state(mixer, kctl);
unlock:
mutex_unlock(&private->data_mutex);
return (ret < 0) ? 0 : 1;
}
static int
snd_s1810c_switch_init(struct usb_mixer_interface *mixer,
const struct snd_kcontrol_new *new_kctl)
{
struct snd_kcontrol *kctl;
struct usb_mixer_elem_info *elem;
elem = kzalloc(sizeof(struct usb_mixer_elem_info), GFP_KERNEL);
if (!elem)
return -ENOMEM;
elem->head.mixer = mixer;
elem->control = 0;
elem->head.id = 0;
elem->channels = 1;
kctl = snd_ctl_new1(new_kctl, elem);
if (!kctl) {
kfree(elem);
return -ENOMEM;
}
kctl->private_free = snd_usb_mixer_elem_free;
return snd_usb_mixer_add_control(&elem->head, kctl);
}
static int
snd_s1810c_line_sw_info(struct snd_kcontrol *kctl,
struct snd_ctl_elem_info *uinfo)
{
static const char *const texts[2] = {
"Preamp On (Mic/Inst)",
"Preamp Off (Line in)"
};
return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(texts), texts);
}
static const struct snd_kcontrol_new snd_s1810c_line_sw = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Line 1/2 Source Type",
.info = snd_s1810c_line_sw_info,
.get = snd_s1810c_switch_get,
.put = snd_s1810c_switch_set,
.private_value = (SC1810C_STATE_LINE_SW | SC1810C_CTL_LINE_SW << 8)
};
static const struct snd_kcontrol_new snd_s1810c_mute_sw = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Mute Main Out Switch",
.info = snd_ctl_boolean_mono_info,
.get = snd_s1810c_switch_get,
.put = snd_s1810c_switch_set,
.private_value = (SC1810C_STATE_MUTE_SW | SC1810C_CTL_MUTE_SW << 8)
};
static const struct snd_kcontrol_new snd_s1810c_48v_sw = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "48V Phantom Power On Mic Inputs Switch",
.info = snd_ctl_boolean_mono_info,
.get = snd_s1810c_switch_get,
.put = snd_s1810c_switch_set,
.private_value = (SC1810C_STATE_48V_SW | SC1810C_CTL_48V_SW << 8)
};
static int
snd_s1810c_ab_sw_info(struct snd_kcontrol *kctl,
struct snd_ctl_elem_info *uinfo)
{
static const char *const texts[2] = {
"1/2",
"3/4"
};
return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(texts), texts);
}
static const struct snd_kcontrol_new snd_s1810c_ab_sw = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Headphone 1 Source Route",
.info = snd_s1810c_ab_sw_info,
.get = snd_s1810c_switch_get,
.put = snd_s1810c_switch_set,
.private_value = (SC1810C_STATE_AB_SW | SC1810C_CTL_AB_SW << 8)
};
static void snd_sc1810_mixer_state_free(struct usb_mixer_interface *mixer)
{
struct s1810_mixer_state *private = mixer->private_data;
kfree(private);
mixer->private_data = NULL;
}
/* Entry point, called from mixer_quirks.c */
int snd_sc1810_init_mixer(struct usb_mixer_interface *mixer)
{
struct s1810_mixer_state *private = NULL;
struct snd_usb_audio *chip = mixer->chip;
struct usb_device *dev = chip->dev;
int ret = 0;
/* Run this only once */
if (!list_empty(&chip->mixer_list))
return 0;
dev_info(&dev->dev,
"Presonus Studio 1810c, device_setup: %u\n", chip->setup);
if (chip->setup == 1)
dev_info(&dev->dev, "(8out/18in @ 48kHz)\n");
else if (chip->setup == 2)
dev_info(&dev->dev, "(6out/8in @ 192kHz)\n");
else
dev_info(&dev->dev, "(8out/14in @ 96kHz)\n");
ret = snd_s1810c_init_mixer_maps(chip);
if (ret < 0)
return ret;
private = kzalloc(sizeof(struct s1810_mixer_state), GFP_KERNEL);
if (!private)
return -ENOMEM;
mutex_init(&private->usb_mutex);
mutex_init(&private->data_mutex);
mixer->private_data = private;
mixer->private_free = snd_sc1810_mixer_state_free;
private->seqnum = 1;
ret = snd_s1810c_switch_init(mixer, &snd_s1810c_line_sw);
if (ret < 0)
return ret;
ret = snd_s1810c_switch_init(mixer, &snd_s1810c_mute_sw);
if (ret < 0)
return ret;
ret = snd_s1810c_switch_init(mixer, &snd_s1810c_48v_sw);
if (ret < 0)
return ret;
ret = snd_s1810c_switch_init(mixer, &snd_s1810c_ab_sw);
if (ret < 0)
return ret;
return ret;
}