mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-09-14 06:35:12 +00:00
Code Issues Releases Wiki Activity
linux-stable/drivers/net/ethernet/microchip/enc28j60_hw.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

310 lines
8.7 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0 */
/*
* enc28j60_hw.h: EDTP FrameThrower style enc28j60 registers
*
* $Id: enc28j60_hw.h,v 1.9 2007/12/14 11:59:16 claudio Exp $
*/
#ifndef _ENC28J60_HW_H
#define _ENC28J60_HW_H
/*
* ENC28J60 Control Registers
* Control register definitions are a combination of address,
* bank number, and Ethernet/MAC/PHY indicator bits.
* - Register address (bits 0-4)
* - Bank number (bits 5-6)
* - MAC/MII indicator (bit 7)
*/
#define ADDR_MASK 0x1F
#define BANK_MASK 0x60
#define SPRD_MASK 0x80
/* All-bank registers */
#define EIE 0x1B
#define EIR 0x1C
#define ESTAT 0x1D
#define ECON2 0x1E
#define ECON1 0x1F
/* Bank 0 registers */
#define ERDPTL (0x00|0x00)
#define ERDPTH (0x01|0x00)
#define EWRPTL (0x02|0x00)
#define EWRPTH (0x03|0x00)
#define ETXSTL (0x04|0x00)
#define ETXSTH (0x05|0x00)
#define ETXNDL (0x06|0x00)
#define ETXNDH (0x07|0x00)
#define ERXSTL (0x08|0x00)
#define ERXSTH (0x09|0x00)
#define ERXNDL (0x0A|0x00)
#define ERXNDH (0x0B|0x00)
#define ERXRDPTL (0x0C|0x00)
#define ERXRDPTH (0x0D|0x00)
#define ERXWRPTL (0x0E|0x00)
#define ERXWRPTH (0x0F|0x00)
#define EDMASTL (0x10|0x00)
#define EDMASTH (0x11|0x00)
#define EDMANDL (0x12|0x00)
#define EDMANDH (0x13|0x00)
#define EDMADSTL (0x14|0x00)
#define EDMADSTH (0x15|0x00)
#define EDMACSL (0x16|0x00)
#define EDMACSH (0x17|0x00)
/* Bank 1 registers */
#define EHT0 (0x00|0x20)
#define EHT1 (0x01|0x20)
#define EHT2 (0x02|0x20)
#define EHT3 (0x03|0x20)
#define EHT4 (0x04|0x20)
#define EHT5 (0x05|0x20)
#define EHT6 (0x06|0x20)
#define EHT7 (0x07|0x20)
#define EPMM0 (0x08|0x20)
#define EPMM1 (0x09|0x20)
#define EPMM2 (0x0A|0x20)
#define EPMM3 (0x0B|0x20)
#define EPMM4 (0x0C|0x20)
#define EPMM5 (0x0D|0x20)
#define EPMM6 (0x0E|0x20)
#define EPMM7 (0x0F|0x20)
#define EPMCSL (0x10|0x20)
#define EPMCSH (0x11|0x20)
#define EPMOL (0x14|0x20)
#define EPMOH (0x15|0x20)
#define EWOLIE (0x16|0x20)
#define EWOLIR (0x17|0x20)
#define ERXFCON (0x18|0x20)
#define EPKTCNT (0x19|0x20)
/* Bank 2 registers */
#define MACON1 (0x00|0x40|SPRD_MASK)
/* #define MACON2 (0x01|0x40|SPRD_MASK) */
#define MACON3 (0x02|0x40|SPRD_MASK)
#define MACON4 (0x03|0x40|SPRD_MASK)
#define MABBIPG (0x04|0x40|SPRD_MASK)
#define MAIPGL (0x06|0x40|SPRD_MASK)
#define MAIPGH (0x07|0x40|SPRD_MASK)
#define MACLCON1 (0x08|0x40|SPRD_MASK)
#define MACLCON2 (0x09|0x40|SPRD_MASK)
#define MAMXFLL (0x0A|0x40|SPRD_MASK)
#define MAMXFLH (0x0B|0x40|SPRD_MASK)
#define MAPHSUP (0x0D|0x40|SPRD_MASK)
#define MICON (0x11|0x40|SPRD_MASK)
#define MICMD (0x12|0x40|SPRD_MASK)
#define MIREGADR (0x14|0x40|SPRD_MASK)
#define MIWRL (0x16|0x40|SPRD_MASK)
#define MIWRH (0x17|0x40|SPRD_MASK)
#define MIRDL (0x18|0x40|SPRD_MASK)
#define MIRDH (0x19|0x40|SPRD_MASK)
/* Bank 3 registers */
#define MAADR1 (0x00|0x60|SPRD_MASK)
#define MAADR0 (0x01|0x60|SPRD_MASK)
#define MAADR3 (0x02|0x60|SPRD_MASK)
#define MAADR2 (0x03|0x60|SPRD_MASK)
#define MAADR5 (0x04|0x60|SPRD_MASK)
#define MAADR4 (0x05|0x60|SPRD_MASK)
#define EBSTSD (0x06|0x60)
#define EBSTCON (0x07|0x60)
#define EBSTCSL (0x08|0x60)
#define EBSTCSH (0x09|0x60)
#define MISTAT (0x0A|0x60|SPRD_MASK)
#define EREVID (0x12|0x60)
#define ECOCON (0x15|0x60)
#define EFLOCON (0x17|0x60)
#define EPAUSL (0x18|0x60)
#define EPAUSH (0x19|0x60)
/* PHY registers */
#define PHCON1 0x00
#define PHSTAT1 0x01
#define PHHID1 0x02
#define PHHID2 0x03
#define PHCON2 0x10
#define PHSTAT2 0x11
#define PHIE 0x12
#define PHIR 0x13
#define PHLCON 0x14
/* ENC28J60 EIE Register Bit Definitions */
#define EIE_INTIE 0x80
#define EIE_PKTIE 0x40
#define EIE_DMAIE 0x20
#define EIE_LINKIE 0x10
#define EIE_TXIE 0x08
/* #define EIE_WOLIE 0x04 (reserved) */
#define EIE_TXERIE 0x02
#define EIE_RXERIE 0x01
/* ENC28J60 EIR Register Bit Definitions */
#define EIR_PKTIF 0x40
#define EIR_DMAIF 0x20
#define EIR_LINKIF 0x10
#define EIR_TXIF 0x08
/* #define EIR_WOLIF 0x04 (reserved) */
#define EIR_TXERIF 0x02
#define EIR_RXERIF 0x01
/* ENC28J60 ESTAT Register Bit Definitions */
#define ESTAT_INT 0x80
#define ESTAT_LATECOL 0x10
#define ESTAT_RXBUSY 0x04
#define ESTAT_TXABRT 0x02
#define ESTAT_CLKRDY 0x01
/* ENC28J60 ECON2 Register Bit Definitions */
#define ECON2_AUTOINC 0x80
#define ECON2_PKTDEC 0x40
#define ECON2_PWRSV 0x20
#define ECON2_VRPS 0x08
/* ENC28J60 ECON1 Register Bit Definitions */
#define ECON1_TXRST 0x80
#define ECON1_RXRST 0x40
#define ECON1_DMAST 0x20
#define ECON1_CSUMEN 0x10
#define ECON1_TXRTS 0x08
#define ECON1_RXEN 0x04
#define ECON1_BSEL1 0x02
#define ECON1_BSEL0 0x01
/* ENC28J60 MACON1 Register Bit Definitions */
#define MACON1_LOOPBK 0x10
#define MACON1_TXPAUS 0x08
#define MACON1_RXPAUS 0x04
#define MACON1_PASSALL 0x02
#define MACON1_MARXEN 0x01
/* ENC28J60 MACON2 Register Bit Definitions */
#define MACON2_MARST 0x80
#define MACON2_RNDRST 0x40
#define MACON2_MARXRST 0x08
#define MACON2_RFUNRST 0x04
#define MACON2_MATXRST 0x02
#define MACON2_TFUNRST 0x01
/* ENC28J60 MACON3 Register Bit Definitions */
#define MACON3_PADCFG2 0x80
#define MACON3_PADCFG1 0x40
#define MACON3_PADCFG0 0x20
#define MACON3_TXCRCEN 0x10
#define MACON3_PHDRLEN 0x08
#define MACON3_HFRMLEN 0x04
#define MACON3_FRMLNEN 0x02
#define MACON3_FULDPX 0x01
/* ENC28J60 MICMD Register Bit Definitions */
#define MICMD_MIISCAN 0x02
#define MICMD_MIIRD 0x01
/* ENC28J60 MISTAT Register Bit Definitions */
#define MISTAT_NVALID 0x04
#define MISTAT_SCAN 0x02
#define MISTAT_BUSY 0x01
/* ENC28J60 ERXFCON Register Bit Definitions */
#define ERXFCON_UCEN 0x80
#define ERXFCON_ANDOR 0x40
#define ERXFCON_CRCEN 0x20
#define ERXFCON_PMEN 0x10
#define ERXFCON_MPEN 0x08
#define ERXFCON_HTEN 0x04
#define ERXFCON_MCEN 0x02
#define ERXFCON_BCEN 0x01
/* ENC28J60 PHY PHCON1 Register Bit Definitions */
#define PHCON1_PRST 0x8000
#define PHCON1_PLOOPBK 0x4000
#define PHCON1_PPWRSV 0x0800
#define PHCON1_PDPXMD 0x0100
/* ENC28J60 PHY PHSTAT1 Register Bit Definitions */
#define PHSTAT1_PFDPX 0x1000
#define PHSTAT1_PHDPX 0x0800
#define PHSTAT1_LLSTAT 0x0004
#define PHSTAT1_JBSTAT 0x0002
/* ENC28J60 PHY PHSTAT2 Register Bit Definitions */
#define PHSTAT2_TXSTAT (1 << 13)
#define PHSTAT2_RXSTAT (1 << 12)
#define PHSTAT2_COLSTAT (1 << 11)
#define PHSTAT2_LSTAT (1 << 10)
#define PHSTAT2_DPXSTAT (1 << 9)
#define PHSTAT2_PLRITY (1 << 5)
/* ENC28J60 PHY PHCON2 Register Bit Definitions */
#define PHCON2_FRCLINK 0x4000
#define PHCON2_TXDIS 0x2000
#define PHCON2_JABBER 0x0400
#define PHCON2_HDLDIS 0x0100
/* ENC28J60 PHY PHIE Register Bit Definitions */
#define PHIE_PLNKIE (1 << 4)
#define PHIE_PGEIE (1 << 1)
/* ENC28J60 PHY PHIR Register Bit Definitions */
#define PHIR_PLNKIF (1 << 4)
#define PHIR_PGEIF (1 << 1)
/* ENC28J60 Packet Control Byte Bit Definitions */
#define PKTCTRL_PHUGEEN 0x08
#define PKTCTRL_PPADEN 0x04
#define PKTCTRL_PCRCEN 0x02
#define PKTCTRL_POVERRIDE 0x01
/* ENC28J60 Transmit Status Vector */
#define TSV_TXBYTECNT 0
#define TSV_TXCOLLISIONCNT 16
#define TSV_TXCRCERROR 20
#define TSV_TXLENCHKERROR 21
#define TSV_TXLENOUTOFRANGE 22
#define TSV_TXDONE 23
#define TSV_TXMULTICAST 24
#define TSV_TXBROADCAST 25
#define TSV_TXPACKETDEFER 26
#define TSV_TXEXDEFER 27
#define TSV_TXEXCOLLISION 28
#define TSV_TXLATECOLLISION 29
#define TSV_TXGIANT 30
#define TSV_TXUNDERRUN 31
#define TSV_TOTBYTETXONWIRE 32
#define TSV_TXCONTROLFRAME 48
#define TSV_TXPAUSEFRAME 49
#define TSV_BACKPRESSUREAPP 50
#define TSV_TXVLANTAGFRAME 51
#define TSV_SIZE 7
#define TSV_BYTEOF(x) ((x) / 8)
#define TSV_BITMASK(x) (1 << ((x) % 8))
#define TSV_GETBIT(x, y) (((x)[TSV_BYTEOF(y)] & TSV_BITMASK(y)) ? 1 : 0)
/* ENC28J60 Receive Status Vector */
#define RSV_RXLONGEVDROPEV 16
#define RSV_CARRIEREV 18
#define RSV_CRCERROR 20
#define RSV_LENCHECKERR 21
#define RSV_LENOUTOFRANGE 22
#define RSV_RXOK 23
#define RSV_RXMULTICAST 24
#define RSV_RXBROADCAST 25
#define RSV_DRIBBLENIBBLE 26
#define RSV_RXCONTROLFRAME 27
#define RSV_RXPAUSEFRAME 28
#define RSV_RXUNKNOWNOPCODE 29
#define RSV_RXTYPEVLAN 30
#define RSV_SIZE 6
#define RSV_BITMASK(x) (1 << ((x) - 16))
#define RSV_GETBIT(x, y) (((x) & RSV_BITMASK(y)) ? 1 : 0)
/* SPI operation codes */
#define ENC28J60_READ_CTRL_REG 0x00
#define ENC28J60_READ_BUF_MEM 0x3A
#define ENC28J60_WRITE_CTRL_REG 0x40
#define ENC28J60_WRITE_BUF_MEM 0x7A
#define ENC28J60_BIT_FIELD_SET 0x80
#define ENC28J60_BIT_FIELD_CLR 0xA0
#define ENC28J60_SOFT_RESET 0xFF
/* buffer boundaries applied to internal 8K ram
* entire available packet buffer space is allocated.
* Give TX buffer space for one full ethernet frame (~1500 bytes)
* receive buffer gets the rest */
#define TXSTART_INIT 0x1A00
#define TXEND_INIT 0x1FFF
/* Put RX buffer at 0 as suggested by the Errata datasheet */
#define RXSTART_INIT 0x0000
#define RXEND_INIT 0x19FF
/* maximum ethernet frame length */
#define MAX_FRAMELEN 1518
/* Preferred half duplex: LEDA: Link status LEDB: Rx/Tx activity */
#define ENC28J60_LAMPS_MODE 0x3476
#endif
Reference in a new issue View git blame Copy permalink