309 lines
8.8 KiB
YAML
309 lines
8.8 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/display/msm/qcom,sc7180-mdss.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Qualcomm SC7180 Display MDSS
|
|
|
|
maintainers:
|
|
- Krishna Manikandan <quic_mkrishn@quicinc.com>
|
|
|
|
description:
|
|
Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
|
|
sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
|
|
bindings of MDSS are mentioned for SC7180 target.
|
|
|
|
$ref: /schemas/display/msm/mdss-common.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
const: qcom,sc7180-mdss
|
|
|
|
clocks:
|
|
items:
|
|
- description: Display AHB clock from gcc
|
|
- description: Display AHB clock from dispcc
|
|
- description: Display core clock
|
|
|
|
clock-names:
|
|
items:
|
|
- const: iface
|
|
- const: ahb
|
|
- const: core
|
|
|
|
iommus:
|
|
maxItems: 1
|
|
|
|
interconnects:
|
|
maxItems: 1
|
|
|
|
interconnect-names:
|
|
maxItems: 1
|
|
|
|
patternProperties:
|
|
"^display-controller@[0-9a-f]+$":
|
|
type: object
|
|
properties:
|
|
compatible:
|
|
const: qcom,sc7180-dpu
|
|
|
|
"^displayport-controller@[0-9a-f]+$":
|
|
type: object
|
|
properties:
|
|
compatible:
|
|
const: qcom,sc7180-dp
|
|
|
|
"^dsi@[0-9a-f]+$":
|
|
type: object
|
|
properties:
|
|
compatible:
|
|
items:
|
|
- const: qcom,sc7180-dsi-ctrl
|
|
- const: qcom,mdss-dsi-ctrl
|
|
|
|
"^phy@[0-9a-f]+$":
|
|
type: object
|
|
properties:
|
|
compatible:
|
|
const: qcom,dsi-phy-10nm
|
|
|
|
required:
|
|
- compatible
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/clock/qcom,dispcc-sc7180.h>
|
|
#include <dt-bindings/clock/qcom,gcc-sc7180.h>
|
|
#include <dt-bindings/clock/qcom,rpmh.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/interconnect/qcom,sdm845.h>
|
|
#include <dt-bindings/power/qcom-rpmpd.h>
|
|
|
|
display-subsystem@ae00000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "qcom,sc7180-mdss";
|
|
reg = <0xae00000 0x1000>;
|
|
reg-names = "mdss";
|
|
power-domains = <&dispcc MDSS_GDSC>;
|
|
clocks = <&gcc GCC_DISP_AHB_CLK>,
|
|
<&dispcc DISP_CC_MDSS_AHB_CLK>,
|
|
<&dispcc DISP_CC_MDSS_MDP_CLK>;
|
|
clock-names = "iface", "ahb", "core";
|
|
|
|
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
|
|
interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
|
|
interconnect-names = "mdp0-mem";
|
|
|
|
iommus = <&apps_smmu 0x800 0x2>;
|
|
ranges;
|
|
|
|
display-controller@ae01000 {
|
|
compatible = "qcom,sc7180-dpu";
|
|
reg = <0x0ae01000 0x8f000>,
|
|
<0x0aeb0000 0x2008>;
|
|
|
|
reg-names = "mdp", "vbif";
|
|
|
|
clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
|
|
<&dispcc DISP_CC_MDSS_AHB_CLK>,
|
|
<&dispcc DISP_CC_MDSS_ROT_CLK>,
|
|
<&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
|
|
<&dispcc DISP_CC_MDSS_MDP_CLK>,
|
|
<&dispcc DISP_CC_MDSS_VSYNC_CLK>;
|
|
clock-names = "bus", "iface", "rot", "lut", "core",
|
|
"vsync";
|
|
|
|
interrupt-parent = <&mdss>;
|
|
interrupts = <0>;
|
|
power-domains = <&rpmhpd SC7180_CX>;
|
|
operating-points-v2 = <&mdp_opp_table>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
dpu_intf1_out: endpoint {
|
|
remote-endpoint = <&dsi0_in>;
|
|
};
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
dpu_intf0_out: endpoint {
|
|
remote-endpoint = <&dp_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
dsi@ae94000 {
|
|
compatible = "qcom,sc7180-dsi-ctrl", "qcom,mdss-dsi-ctrl";
|
|
reg = <0x0ae94000 0x400>;
|
|
reg-names = "dsi_ctrl";
|
|
|
|
interrupt-parent = <&mdss>;
|
|
interrupts = <4>;
|
|
|
|
clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
|
|
<&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
|
|
<&dispcc DISP_CC_MDSS_PCLK0_CLK>,
|
|
<&dispcc DISP_CC_MDSS_ESC0_CLK>,
|
|
<&dispcc DISP_CC_MDSS_AHB_CLK>,
|
|
<&gcc GCC_DISP_HF_AXI_CLK>;
|
|
clock-names = "byte",
|
|
"byte_intf",
|
|
"pixel",
|
|
"core",
|
|
"iface",
|
|
"bus";
|
|
|
|
assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
|
|
assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>;
|
|
|
|
operating-points-v2 = <&dsi_opp_table>;
|
|
power-domains = <&rpmhpd SC7180_CX>;
|
|
|
|
phys = <&dsi_phy>;
|
|
phy-names = "dsi";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
dsi0_in: endpoint {
|
|
remote-endpoint = <&dpu_intf1_out>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
dsi0_out: endpoint {
|
|
};
|
|
};
|
|
};
|
|
|
|
dsi_opp_table: opp-table {
|
|
compatible = "operating-points-v2";
|
|
|
|
opp-187500000 {
|
|
opp-hz = /bits/ 64 <187500000>;
|
|
required-opps = <&rpmhpd_opp_low_svs>;
|
|
};
|
|
|
|
opp-300000000 {
|
|
opp-hz = /bits/ 64 <300000000>;
|
|
required-opps = <&rpmhpd_opp_svs>;
|
|
};
|
|
|
|
opp-358000000 {
|
|
opp-hz = /bits/ 64 <358000000>;
|
|
required-opps = <&rpmhpd_opp_svs_l1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
dsi_phy: phy@ae94400 {
|
|
compatible = "qcom,dsi-phy-10nm";
|
|
reg = <0x0ae94400 0x200>,
|
|
<0x0ae94600 0x280>,
|
|
<0x0ae94a00 0x1e0>;
|
|
reg-names = "dsi_phy",
|
|
"dsi_phy_lane",
|
|
"dsi_pll";
|
|
|
|
#clock-cells = <1>;
|
|
#phy-cells = <0>;
|
|
|
|
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
|
|
<&rpmhcc RPMH_CXO_CLK>;
|
|
clock-names = "iface", "ref";
|
|
vdds-supply = <&vreg_dsi_phy>;
|
|
};
|
|
|
|
displayport-controller@ae90000 {
|
|
compatible = "qcom,sc7180-dp";
|
|
|
|
reg = <0xae90000 0x200>,
|
|
<0xae90200 0x200>,
|
|
<0xae90400 0xc00>,
|
|
<0xae91000 0x400>,
|
|
<0xae91400 0x400>;
|
|
|
|
interrupt-parent = <&mdss>;
|
|
interrupts = <12>;
|
|
|
|
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
|
|
<&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
|
|
<&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
|
|
<&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
|
|
<&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
|
|
clock-names = "core_iface", "core_aux", "ctrl_link",
|
|
"ctrl_link_iface", "stream_pixel";
|
|
assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
|
|
<&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
|
|
assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
|
|
phys = <&dp_phy>;
|
|
phy-names = "dp";
|
|
|
|
operating-points-v2 = <&dp_opp_table>;
|
|
power-domains = <&rpmhpd SC7180_CX>;
|
|
|
|
#sound-dai-cells = <0>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
port@0 {
|
|
reg = <0>;
|
|
dp_in: endpoint {
|
|
remote-endpoint = <&dpu_intf0_out>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
dp_out: endpoint { };
|
|
};
|
|
};
|
|
|
|
dp_opp_table: opp-table {
|
|
compatible = "operating-points-v2";
|
|
|
|
opp-160000000 {
|
|
opp-hz = /bits/ 64 <160000000>;
|
|
required-opps = <&rpmhpd_opp_low_svs>;
|
|
};
|
|
|
|
opp-270000000 {
|
|
opp-hz = /bits/ 64 <270000000>;
|
|
required-opps = <&rpmhpd_opp_svs>;
|
|
};
|
|
|
|
opp-540000000 {
|
|
opp-hz = /bits/ 64 <540000000>;
|
|
required-opps = <&rpmhpd_opp_svs_l1>;
|
|
};
|
|
|
|
opp-810000000 {
|
|
opp-hz = /bits/ 64 <810000000>;
|
|
required-opps = <&rpmhpd_opp_nom>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
...
|