mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 10:49:33 +00:00
![Linus Torvalds](/assets/img/avatar_default.png)
Pull i2c updates from Wolfram Sang: - the core has now a lockless variant of i2c_smbus_xfer. Some open coded versions of this got removed in drivers. This also enables proper SCCB support in regmap. - locking got a more precise naming. i2c_{un}lock_adapter() had to go, and we know use i2c_lock_bus() consistently with flags like I2C_LOCK_ROOT_ADAPTER and I2C_LOCK_SEGMENT to avoid ambiguity. - the gpio fault injector got a new delicate testcase - the bus recovery procedure got fixed to handle the new testcase correctly - a new quirk flag for controllers not able to handle zero length messages together with driver updates to use it - new drivers: FSI bus attached I2C masters, GENI I2C controller, Owl family S900 - and a good set of driver improvements and bugfixes * 'i2c/for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (77 commits) i2c: rcar: implement STOP and REP_START according to docs i2c: rcar: refactor private flags i2c: core: ACPI: Make acpi_gsb_i2c_read_bytes() check i2c_transfer return value i2c: core: ACPI: Properly set status byte to 0 for multi-byte writes dt-bindings: i2c: rcar: Add r8a774a1 support dt-bindings: i2c: sh_mobile: Add r8a774a1 support i2c: imx: Simplify stopped state tracking i2c: imx: Fix race condition in dma read i2c: pasemi: remove hardcoded bus numbers on smbus i2c: designware: Add SPDX license tag i2c: designware: Convert to use struct i2c_timings i2c: core: Parse SDA hold time from firmware i2c: designware-pcidrv: Mark expected switch fall-through i2c: amd8111: Mark expected switch fall-through i2c: sh_mobile: use core to detect 'no zero length read' quirk i2c: xlr: use core to detect 'no zero length' quirk i2c: rcar: use core to detect 'no zero length' quirk i2c: stu300: use core to detect 'no zero length' quirk i2c: pmcmsp: use core to detect 'no zero length' quirk i2c: mxs: use core to detect 'no zero length' quirk ...
1270 lines
35 KiB
C
1270 lines
35 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2002 Motorola GSG-China
|
|
*
|
|
* Author:
|
|
* Darius Augulis, Teltonika Inc.
|
|
*
|
|
* Desc.:
|
|
* Implementation of I2C Adapter/Algorithm Driver
|
|
* for I2C Bus integrated in Freescale i.MX/MXC processors
|
|
*
|
|
* Derived from Motorola GSG China I2C example driver
|
|
*
|
|
* Copyright (C) 2005 Torsten Koschorrek <koschorrek at synertronixx.de
|
|
* Copyright (C) 2005 Matthias Blaschke <blaschke at synertronixx.de
|
|
* Copyright (C) 2007 RightHand Technologies, Inc.
|
|
* Copyright (C) 2008 Darius Augulis <darius.augulis at teltonika.lt>
|
|
*
|
|
* Copyright 2013 Freescale Semiconductor, Inc.
|
|
*
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/dmapool.h>
|
|
#include <linux/err.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_dma.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/platform_data/i2c-imx.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/slab.h>
|
|
|
|
/* This will be the driver name the kernel reports */
|
|
#define DRIVER_NAME "imx-i2c"
|
|
|
|
/* Default value */
|
|
#define IMX_I2C_BIT_RATE 100000 /* 100kHz */
|
|
|
|
/*
|
|
* Enable DMA if transfer byte size is bigger than this threshold.
|
|
* As the hardware request, it must bigger than 4 bytes.\
|
|
* I have set '16' here, maybe it's not the best but I think it's
|
|
* the appropriate.
|
|
*/
|
|
#define DMA_THRESHOLD 16
|
|
#define DMA_TIMEOUT 1000
|
|
|
|
/* IMX I2C registers:
|
|
* the I2C register offset is different between SoCs,
|
|
* to provid support for all these chips, split the
|
|
* register offset into a fixed base address and a
|
|
* variable shift value, then the full register offset
|
|
* will be calculated by
|
|
* reg_off = ( reg_base_addr << reg_shift)
|
|
*/
|
|
#define IMX_I2C_IADR 0x00 /* i2c slave address */
|
|
#define IMX_I2C_IFDR 0x01 /* i2c frequency divider */
|
|
#define IMX_I2C_I2CR 0x02 /* i2c control */
|
|
#define IMX_I2C_I2SR 0x03 /* i2c status */
|
|
#define IMX_I2C_I2DR 0x04 /* i2c transfer data */
|
|
|
|
#define IMX_I2C_REGSHIFT 2
|
|
#define VF610_I2C_REGSHIFT 0
|
|
|
|
/* Bits of IMX I2C registers */
|
|
#define I2SR_RXAK 0x01
|
|
#define I2SR_IIF 0x02
|
|
#define I2SR_SRW 0x04
|
|
#define I2SR_IAL 0x10
|
|
#define I2SR_IBB 0x20
|
|
#define I2SR_IAAS 0x40
|
|
#define I2SR_ICF 0x80
|
|
#define I2CR_DMAEN 0x02
|
|
#define I2CR_RSTA 0x04
|
|
#define I2CR_TXAK 0x08
|
|
#define I2CR_MTX 0x10
|
|
#define I2CR_MSTA 0x20
|
|
#define I2CR_IIEN 0x40
|
|
#define I2CR_IEN 0x80
|
|
|
|
/* register bits different operating codes definition:
|
|
* 1) I2SR: Interrupt flags clear operation differ between SoCs:
|
|
* - write zero to clear(w0c) INT flag on i.MX,
|
|
* - but write one to clear(w1c) INT flag on Vybrid.
|
|
* 2) I2CR: I2C module enable operation also differ between SoCs:
|
|
* - set I2CR_IEN bit enable the module on i.MX,
|
|
* - but clear I2CR_IEN bit enable the module on Vybrid.
|
|
*/
|
|
#define I2SR_CLR_OPCODE_W0C 0x0
|
|
#define I2SR_CLR_OPCODE_W1C (I2SR_IAL | I2SR_IIF)
|
|
#define I2CR_IEN_OPCODE_0 0x0
|
|
#define I2CR_IEN_OPCODE_1 I2CR_IEN
|
|
|
|
#define I2C_PM_TIMEOUT 10 /* ms */
|
|
|
|
/*
|
|
* sorted list of clock divider, register value pairs
|
|
* taken from table 26-5, p.26-9, Freescale i.MX
|
|
* Integrated Portable System Processor Reference Manual
|
|
* Document Number: MC9328MXLRM, Rev. 5.1, 06/2007
|
|
*
|
|
* Duplicated divider values removed from list
|
|
*/
|
|
struct imx_i2c_clk_pair {
|
|
u16 div;
|
|
u16 val;
|
|
};
|
|
|
|
static struct imx_i2c_clk_pair imx_i2c_clk_div[] = {
|
|
{ 22, 0x20 }, { 24, 0x21 }, { 26, 0x22 }, { 28, 0x23 },
|
|
{ 30, 0x00 }, { 32, 0x24 }, { 36, 0x25 }, { 40, 0x26 },
|
|
{ 42, 0x03 }, { 44, 0x27 }, { 48, 0x28 }, { 52, 0x05 },
|
|
{ 56, 0x29 }, { 60, 0x06 }, { 64, 0x2A }, { 72, 0x2B },
|
|
{ 80, 0x2C }, { 88, 0x09 }, { 96, 0x2D }, { 104, 0x0A },
|
|
{ 112, 0x2E }, { 128, 0x2F }, { 144, 0x0C }, { 160, 0x30 },
|
|
{ 192, 0x31 }, { 224, 0x32 }, { 240, 0x0F }, { 256, 0x33 },
|
|
{ 288, 0x10 }, { 320, 0x34 }, { 384, 0x35 }, { 448, 0x36 },
|
|
{ 480, 0x13 }, { 512, 0x37 }, { 576, 0x14 }, { 640, 0x38 },
|
|
{ 768, 0x39 }, { 896, 0x3A }, { 960, 0x17 }, { 1024, 0x3B },
|
|
{ 1152, 0x18 }, { 1280, 0x3C }, { 1536, 0x3D }, { 1792, 0x3E },
|
|
{ 1920, 0x1B }, { 2048, 0x3F }, { 2304, 0x1C }, { 2560, 0x1D },
|
|
{ 3072, 0x1E }, { 3840, 0x1F }
|
|
};
|
|
|
|
/* Vybrid VF610 clock divider, register value pairs */
|
|
static struct imx_i2c_clk_pair vf610_i2c_clk_div[] = {
|
|
{ 20, 0x00 }, { 22, 0x01 }, { 24, 0x02 }, { 26, 0x03 },
|
|
{ 28, 0x04 }, { 30, 0x05 }, { 32, 0x09 }, { 34, 0x06 },
|
|
{ 36, 0x0A }, { 40, 0x07 }, { 44, 0x0C }, { 48, 0x0D },
|
|
{ 52, 0x43 }, { 56, 0x0E }, { 60, 0x45 }, { 64, 0x12 },
|
|
{ 68, 0x0F }, { 72, 0x13 }, { 80, 0x14 }, { 88, 0x15 },
|
|
{ 96, 0x19 }, { 104, 0x16 }, { 112, 0x1A }, { 128, 0x17 },
|
|
{ 136, 0x4F }, { 144, 0x1C }, { 160, 0x1D }, { 176, 0x55 },
|
|
{ 192, 0x1E }, { 208, 0x56 }, { 224, 0x22 }, { 228, 0x24 },
|
|
{ 240, 0x1F }, { 256, 0x23 }, { 288, 0x5C }, { 320, 0x25 },
|
|
{ 384, 0x26 }, { 448, 0x2A }, { 480, 0x27 }, { 512, 0x2B },
|
|
{ 576, 0x2C }, { 640, 0x2D }, { 768, 0x31 }, { 896, 0x32 },
|
|
{ 960, 0x2F }, { 1024, 0x33 }, { 1152, 0x34 }, { 1280, 0x35 },
|
|
{ 1536, 0x36 }, { 1792, 0x3A }, { 1920, 0x37 }, { 2048, 0x3B },
|
|
{ 2304, 0x3C }, { 2560, 0x3D }, { 3072, 0x3E }, { 3584, 0x7A },
|
|
{ 3840, 0x3F }, { 4096, 0x7B }, { 5120, 0x7D }, { 6144, 0x7E },
|
|
};
|
|
|
|
enum imx_i2c_type {
|
|
IMX1_I2C,
|
|
IMX21_I2C,
|
|
VF610_I2C,
|
|
};
|
|
|
|
struct imx_i2c_hwdata {
|
|
enum imx_i2c_type devtype;
|
|
unsigned regshift;
|
|
struct imx_i2c_clk_pair *clk_div;
|
|
unsigned ndivs;
|
|
unsigned i2sr_clr_opcode;
|
|
unsigned i2cr_ien_opcode;
|
|
};
|
|
|
|
struct imx_i2c_dma {
|
|
struct dma_chan *chan_tx;
|
|
struct dma_chan *chan_rx;
|
|
struct dma_chan *chan_using;
|
|
struct completion cmd_complete;
|
|
dma_addr_t dma_buf;
|
|
unsigned int dma_len;
|
|
enum dma_transfer_direction dma_transfer_dir;
|
|
enum dma_data_direction dma_data_dir;
|
|
};
|
|
|
|
struct imx_i2c_struct {
|
|
struct i2c_adapter adapter;
|
|
struct clk *clk;
|
|
struct notifier_block clk_change_nb;
|
|
void __iomem *base;
|
|
wait_queue_head_t queue;
|
|
unsigned long i2csr;
|
|
unsigned int disable_delay;
|
|
int stopped;
|
|
unsigned int ifdr; /* IMX_I2C_IFDR */
|
|
unsigned int cur_clk;
|
|
unsigned int bitrate;
|
|
const struct imx_i2c_hwdata *hwdata;
|
|
struct i2c_bus_recovery_info rinfo;
|
|
|
|
struct pinctrl *pinctrl;
|
|
struct pinctrl_state *pinctrl_pins_default;
|
|
struct pinctrl_state *pinctrl_pins_gpio;
|
|
|
|
struct imx_i2c_dma *dma;
|
|
};
|
|
|
|
static const struct imx_i2c_hwdata imx1_i2c_hwdata = {
|
|
.devtype = IMX1_I2C,
|
|
.regshift = IMX_I2C_REGSHIFT,
|
|
.clk_div = imx_i2c_clk_div,
|
|
.ndivs = ARRAY_SIZE(imx_i2c_clk_div),
|
|
.i2sr_clr_opcode = I2SR_CLR_OPCODE_W0C,
|
|
.i2cr_ien_opcode = I2CR_IEN_OPCODE_1,
|
|
|
|
};
|
|
|
|
static const struct imx_i2c_hwdata imx21_i2c_hwdata = {
|
|
.devtype = IMX21_I2C,
|
|
.regshift = IMX_I2C_REGSHIFT,
|
|
.clk_div = imx_i2c_clk_div,
|
|
.ndivs = ARRAY_SIZE(imx_i2c_clk_div),
|
|
.i2sr_clr_opcode = I2SR_CLR_OPCODE_W0C,
|
|
.i2cr_ien_opcode = I2CR_IEN_OPCODE_1,
|
|
|
|
};
|
|
|
|
static struct imx_i2c_hwdata vf610_i2c_hwdata = {
|
|
.devtype = VF610_I2C,
|
|
.regshift = VF610_I2C_REGSHIFT,
|
|
.clk_div = vf610_i2c_clk_div,
|
|
.ndivs = ARRAY_SIZE(vf610_i2c_clk_div),
|
|
.i2sr_clr_opcode = I2SR_CLR_OPCODE_W1C,
|
|
.i2cr_ien_opcode = I2CR_IEN_OPCODE_0,
|
|
|
|
};
|
|
|
|
static const struct platform_device_id imx_i2c_devtype[] = {
|
|
{
|
|
.name = "imx1-i2c",
|
|
.driver_data = (kernel_ulong_t)&imx1_i2c_hwdata,
|
|
}, {
|
|
.name = "imx21-i2c",
|
|
.driver_data = (kernel_ulong_t)&imx21_i2c_hwdata,
|
|
}, {
|
|
/* sentinel */
|
|
}
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, imx_i2c_devtype);
|
|
|
|
static const struct of_device_id i2c_imx_dt_ids[] = {
|
|
{ .compatible = "fsl,imx1-i2c", .data = &imx1_i2c_hwdata, },
|
|
{ .compatible = "fsl,imx21-i2c", .data = &imx21_i2c_hwdata, },
|
|
{ .compatible = "fsl,vf610-i2c", .data = &vf610_i2c_hwdata, },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, i2c_imx_dt_ids);
|
|
|
|
static inline int is_imx1_i2c(struct imx_i2c_struct *i2c_imx)
|
|
{
|
|
return i2c_imx->hwdata->devtype == IMX1_I2C;
|
|
}
|
|
|
|
static inline void imx_i2c_write_reg(unsigned int val,
|
|
struct imx_i2c_struct *i2c_imx, unsigned int reg)
|
|
{
|
|
writeb(val, i2c_imx->base + (reg << i2c_imx->hwdata->regshift));
|
|
}
|
|
|
|
static inline unsigned char imx_i2c_read_reg(struct imx_i2c_struct *i2c_imx,
|
|
unsigned int reg)
|
|
{
|
|
return readb(i2c_imx->base + (reg << i2c_imx->hwdata->regshift));
|
|
}
|
|
|
|
/* Functions for DMA support */
|
|
static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx,
|
|
dma_addr_t phy_addr)
|
|
{
|
|
struct imx_i2c_dma *dma;
|
|
struct dma_slave_config dma_sconfig;
|
|
struct device *dev = &i2c_imx->adapter.dev;
|
|
int ret;
|
|
|
|
dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL);
|
|
if (!dma)
|
|
return;
|
|
|
|
dma->chan_tx = dma_request_slave_channel(dev, "tx");
|
|
if (!dma->chan_tx) {
|
|
dev_dbg(dev, "can't request DMA tx channel\n");
|
|
goto fail_al;
|
|
}
|
|
|
|
dma_sconfig.dst_addr = phy_addr +
|
|
(IMX_I2C_I2DR << i2c_imx->hwdata->regshift);
|
|
dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
|
|
dma_sconfig.dst_maxburst = 1;
|
|
dma_sconfig.direction = DMA_MEM_TO_DEV;
|
|
ret = dmaengine_slave_config(dma->chan_tx, &dma_sconfig);
|
|
if (ret < 0) {
|
|
dev_dbg(dev, "can't configure tx channel\n");
|
|
goto fail_tx;
|
|
}
|
|
|
|
dma->chan_rx = dma_request_slave_channel(dev, "rx");
|
|
if (!dma->chan_rx) {
|
|
dev_dbg(dev, "can't request DMA rx channel\n");
|
|
goto fail_tx;
|
|
}
|
|
|
|
dma_sconfig.src_addr = phy_addr +
|
|
(IMX_I2C_I2DR << i2c_imx->hwdata->regshift);
|
|
dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
|
|
dma_sconfig.src_maxburst = 1;
|
|
dma_sconfig.direction = DMA_DEV_TO_MEM;
|
|
ret = dmaengine_slave_config(dma->chan_rx, &dma_sconfig);
|
|
if (ret < 0) {
|
|
dev_dbg(dev, "can't configure rx channel\n");
|
|
goto fail_rx;
|
|
}
|
|
|
|
i2c_imx->dma = dma;
|
|
init_completion(&dma->cmd_complete);
|
|
dev_info(dev, "using %s (tx) and %s (rx) for DMA transfers\n",
|
|
dma_chan_name(dma->chan_tx), dma_chan_name(dma->chan_rx));
|
|
|
|
return;
|
|
|
|
fail_rx:
|
|
dma_release_channel(dma->chan_rx);
|
|
fail_tx:
|
|
dma_release_channel(dma->chan_tx);
|
|
fail_al:
|
|
devm_kfree(dev, dma);
|
|
dev_info(dev, "can't use DMA, using PIO instead.\n");
|
|
}
|
|
|
|
static void i2c_imx_dma_callback(void *arg)
|
|
{
|
|
struct imx_i2c_struct *i2c_imx = (struct imx_i2c_struct *)arg;
|
|
struct imx_i2c_dma *dma = i2c_imx->dma;
|
|
|
|
dma_unmap_single(dma->chan_using->device->dev, dma->dma_buf,
|
|
dma->dma_len, dma->dma_data_dir);
|
|
complete(&dma->cmd_complete);
|
|
}
|
|
|
|
static int i2c_imx_dma_xfer(struct imx_i2c_struct *i2c_imx,
|
|
struct i2c_msg *msgs)
|
|
{
|
|
struct imx_i2c_dma *dma = i2c_imx->dma;
|
|
struct dma_async_tx_descriptor *txdesc;
|
|
struct device *dev = &i2c_imx->adapter.dev;
|
|
struct device *chan_dev = dma->chan_using->device->dev;
|
|
|
|
dma->dma_buf = dma_map_single(chan_dev, msgs->buf,
|
|
dma->dma_len, dma->dma_data_dir);
|
|
if (dma_mapping_error(chan_dev, dma->dma_buf)) {
|
|
dev_err(dev, "DMA mapping failed\n");
|
|
goto err_map;
|
|
}
|
|
|
|
txdesc = dmaengine_prep_slave_single(dma->chan_using, dma->dma_buf,
|
|
dma->dma_len, dma->dma_transfer_dir,
|
|
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
|
|
if (!txdesc) {
|
|
dev_err(dev, "Not able to get desc for DMA xfer\n");
|
|
goto err_desc;
|
|
}
|
|
|
|
reinit_completion(&dma->cmd_complete);
|
|
txdesc->callback = i2c_imx_dma_callback;
|
|
txdesc->callback_param = i2c_imx;
|
|
if (dma_submit_error(dmaengine_submit(txdesc))) {
|
|
dev_err(dev, "DMA submit failed\n");
|
|
goto err_submit;
|
|
}
|
|
|
|
dma_async_issue_pending(dma->chan_using);
|
|
return 0;
|
|
|
|
err_submit:
|
|
dmaengine_terminate_all(dma->chan_using);
|
|
err_desc:
|
|
dma_unmap_single(chan_dev, dma->dma_buf,
|
|
dma->dma_len, dma->dma_data_dir);
|
|
err_map:
|
|
return -EINVAL;
|
|
}
|
|
|
|
static void i2c_imx_dma_free(struct imx_i2c_struct *i2c_imx)
|
|
{
|
|
struct imx_i2c_dma *dma = i2c_imx->dma;
|
|
|
|
dma->dma_buf = 0;
|
|
dma->dma_len = 0;
|
|
|
|
dma_release_channel(dma->chan_tx);
|
|
dma->chan_tx = NULL;
|
|
|
|
dma_release_channel(dma->chan_rx);
|
|
dma->chan_rx = NULL;
|
|
|
|
dma->chan_using = NULL;
|
|
}
|
|
|
|
static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy)
|
|
{
|
|
unsigned long orig_jiffies = jiffies;
|
|
unsigned int temp;
|
|
|
|
dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
|
|
|
|
while (1) {
|
|
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
|
|
|
|
/* check for arbitration lost */
|
|
if (temp & I2SR_IAL) {
|
|
temp &= ~I2SR_IAL;
|
|
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
if (for_busy && (temp & I2SR_IBB)) {
|
|
i2c_imx->stopped = 0;
|
|
break;
|
|
}
|
|
if (!for_busy && !(temp & I2SR_IBB)) {
|
|
i2c_imx->stopped = 1;
|
|
break;
|
|
}
|
|
if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) {
|
|
dev_dbg(&i2c_imx->adapter.dev,
|
|
"<%s> I2C bus is busy\n", __func__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
schedule();
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_imx_trx_complete(struct imx_i2c_struct *i2c_imx)
|
|
{
|
|
wait_event_timeout(i2c_imx->queue, i2c_imx->i2csr & I2SR_IIF, HZ / 10);
|
|
|
|
if (unlikely(!(i2c_imx->i2csr & I2SR_IIF))) {
|
|
dev_dbg(&i2c_imx->adapter.dev, "<%s> Timeout\n", __func__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
dev_dbg(&i2c_imx->adapter.dev, "<%s> TRX complete\n", __func__);
|
|
i2c_imx->i2csr = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_imx_acked(struct imx_i2c_struct *i2c_imx)
|
|
{
|
|
if (imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR) & I2SR_RXAK) {
|
|
dev_dbg(&i2c_imx->adapter.dev, "<%s> No ACK\n", __func__);
|
|
return -ENXIO; /* No ACK */
|
|
}
|
|
|
|
dev_dbg(&i2c_imx->adapter.dev, "<%s> ACK received\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
static void i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
|
|
unsigned int i2c_clk_rate)
|
|
{
|
|
struct imx_i2c_clk_pair *i2c_clk_div = i2c_imx->hwdata->clk_div;
|
|
unsigned int div;
|
|
int i;
|
|
|
|
/* Divider value calculation */
|
|
if (i2c_imx->cur_clk == i2c_clk_rate)
|
|
return;
|
|
|
|
i2c_imx->cur_clk = i2c_clk_rate;
|
|
|
|
div = (i2c_clk_rate + i2c_imx->bitrate - 1) / i2c_imx->bitrate;
|
|
if (div < i2c_clk_div[0].div)
|
|
i = 0;
|
|
else if (div > i2c_clk_div[i2c_imx->hwdata->ndivs - 1].div)
|
|
i = i2c_imx->hwdata->ndivs - 1;
|
|
else
|
|
for (i = 0; i2c_clk_div[i].div < div; i++)
|
|
;
|
|
|
|
/* Store divider value */
|
|
i2c_imx->ifdr = i2c_clk_div[i].val;
|
|
|
|
/*
|
|
* There dummy delay is calculated.
|
|
* It should be about one I2C clock period long.
|
|
* This delay is used in I2C bus disable function
|
|
* to fix chip hardware bug.
|
|
*/
|
|
i2c_imx->disable_delay = (500000U * i2c_clk_div[i].div
|
|
+ (i2c_clk_rate / 2) - 1) / (i2c_clk_rate / 2);
|
|
|
|
#ifdef CONFIG_I2C_DEBUG_BUS
|
|
dev_dbg(&i2c_imx->adapter.dev, "I2C_CLK=%d, REQ DIV=%d\n",
|
|
i2c_clk_rate, div);
|
|
dev_dbg(&i2c_imx->adapter.dev, "IFDR[IC]=0x%x, REAL DIV=%d\n",
|
|
i2c_clk_div[i].val, i2c_clk_div[i].div);
|
|
#endif
|
|
}
|
|
|
|
static int i2c_imx_clk_notifier_call(struct notifier_block *nb,
|
|
unsigned long action, void *data)
|
|
{
|
|
struct clk_notifier_data *ndata = data;
|
|
struct imx_i2c_struct *i2c_imx = container_of(&ndata->clk,
|
|
struct imx_i2c_struct,
|
|
clk);
|
|
|
|
if (action & POST_RATE_CHANGE)
|
|
i2c_imx_set_clk(i2c_imx, ndata->new_rate);
|
|
|
|
return NOTIFY_OK;
|
|
}
|
|
|
|
static int i2c_imx_start(struct imx_i2c_struct *i2c_imx)
|
|
{
|
|
unsigned int temp = 0;
|
|
int result;
|
|
|
|
dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
|
|
|
|
imx_i2c_write_reg(i2c_imx->ifdr, i2c_imx, IMX_I2C_IFDR);
|
|
/* Enable I2C controller */
|
|
imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR);
|
|
imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode, i2c_imx, IMX_I2C_I2CR);
|
|
|
|
/* Wait controller to be stable */
|
|
usleep_range(50, 150);
|
|
|
|
/* Start I2C transaction */
|
|
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
|
|
temp |= I2CR_MSTA;
|
|
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
|
|
result = i2c_imx_bus_busy(i2c_imx, 1);
|
|
if (result)
|
|
return result;
|
|
|
|
temp |= I2CR_IIEN | I2CR_MTX | I2CR_TXAK;
|
|
temp &= ~I2CR_DMAEN;
|
|
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
|
|
return result;
|
|
}
|
|
|
|
static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx)
|
|
{
|
|
unsigned int temp = 0;
|
|
|
|
if (!i2c_imx->stopped) {
|
|
/* Stop I2C transaction */
|
|
dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
|
|
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
|
|
temp &= ~(I2CR_MSTA | I2CR_MTX);
|
|
if (i2c_imx->dma)
|
|
temp &= ~I2CR_DMAEN;
|
|
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
|
|
}
|
|
if (is_imx1_i2c(i2c_imx)) {
|
|
/*
|
|
* This delay caused by an i.MXL hardware bug.
|
|
* If no (or too short) delay, no "STOP" bit will be generated.
|
|
*/
|
|
udelay(i2c_imx->disable_delay);
|
|
}
|
|
|
|
if (!i2c_imx->stopped)
|
|
i2c_imx_bus_busy(i2c_imx, 0);
|
|
|
|
/* Disable I2C controller */
|
|
temp = i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN,
|
|
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
|
|
}
|
|
|
|
static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
|
|
{
|
|
struct imx_i2c_struct *i2c_imx = dev_id;
|
|
unsigned int temp;
|
|
|
|
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
|
|
if (temp & I2SR_IIF) {
|
|
/* save status register */
|
|
i2c_imx->i2csr = temp;
|
|
temp &= ~I2SR_IIF;
|
|
temp |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IIF);
|
|
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
|
|
wake_up(&i2c_imx->queue);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
static int i2c_imx_dma_write(struct imx_i2c_struct *i2c_imx,
|
|
struct i2c_msg *msgs)
|
|
{
|
|
int result;
|
|
unsigned long time_left;
|
|
unsigned int temp = 0;
|
|
unsigned long orig_jiffies = jiffies;
|
|
struct imx_i2c_dma *dma = i2c_imx->dma;
|
|
struct device *dev = &i2c_imx->adapter.dev;
|
|
|
|
dma->chan_using = dma->chan_tx;
|
|
dma->dma_transfer_dir = DMA_MEM_TO_DEV;
|
|
dma->dma_data_dir = DMA_TO_DEVICE;
|
|
dma->dma_len = msgs->len - 1;
|
|
result = i2c_imx_dma_xfer(i2c_imx, msgs);
|
|
if (result)
|
|
return result;
|
|
|
|
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
|
|
temp |= I2CR_DMAEN;
|
|
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
|
|
|
|
/*
|
|
* Write slave address.
|
|
* The first byte must be transmitted by the CPU.
|
|
*/
|
|
imx_i2c_write_reg(i2c_8bit_addr_from_msg(msgs), i2c_imx, IMX_I2C_I2DR);
|
|
time_left = wait_for_completion_timeout(
|
|
&i2c_imx->dma->cmd_complete,
|
|
msecs_to_jiffies(DMA_TIMEOUT));
|
|
if (time_left == 0) {
|
|
dmaengine_terminate_all(dma->chan_using);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/* Waiting for transfer complete. */
|
|
while (1) {
|
|
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
|
|
if (temp & I2SR_ICF)
|
|
break;
|
|
if (time_after(jiffies, orig_jiffies +
|
|
msecs_to_jiffies(DMA_TIMEOUT))) {
|
|
dev_dbg(dev, "<%s> Timeout\n", __func__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
schedule();
|
|
}
|
|
|
|
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
|
|
temp &= ~I2CR_DMAEN;
|
|
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
|
|
|
|
/* The last data byte must be transferred by the CPU. */
|
|
imx_i2c_write_reg(msgs->buf[msgs->len-1],
|
|
i2c_imx, IMX_I2C_I2DR);
|
|
result = i2c_imx_trx_complete(i2c_imx);
|
|
if (result)
|
|
return result;
|
|
|
|
return i2c_imx_acked(i2c_imx);
|
|
}
|
|
|
|
static int i2c_imx_dma_read(struct imx_i2c_struct *i2c_imx,
|
|
struct i2c_msg *msgs, bool is_lastmsg)
|
|
{
|
|
int result;
|
|
unsigned long time_left;
|
|
unsigned int temp;
|
|
unsigned long orig_jiffies = jiffies;
|
|
struct imx_i2c_dma *dma = i2c_imx->dma;
|
|
struct device *dev = &i2c_imx->adapter.dev;
|
|
|
|
|
|
dma->chan_using = dma->chan_rx;
|
|
dma->dma_transfer_dir = DMA_DEV_TO_MEM;
|
|
dma->dma_data_dir = DMA_FROM_DEVICE;
|
|
/* The last two data bytes must be transferred by the CPU. */
|
|
dma->dma_len = msgs->len - 2;
|
|
result = i2c_imx_dma_xfer(i2c_imx, msgs);
|
|
if (result)
|
|
return result;
|
|
|
|
time_left = wait_for_completion_timeout(
|
|
&i2c_imx->dma->cmd_complete,
|
|
msecs_to_jiffies(DMA_TIMEOUT));
|
|
if (time_left == 0) {
|
|
dmaengine_terminate_all(dma->chan_using);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/* waiting for transfer complete. */
|
|
while (1) {
|
|
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
|
|
if (temp & I2SR_ICF)
|
|
break;
|
|
if (time_after(jiffies, orig_jiffies +
|
|
msecs_to_jiffies(DMA_TIMEOUT))) {
|
|
dev_dbg(dev, "<%s> Timeout\n", __func__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
schedule();
|
|
}
|
|
|
|
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
|
|
temp &= ~I2CR_DMAEN;
|
|
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
|
|
|
|
/* read n-1 byte data */
|
|
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
|
|
temp |= I2CR_TXAK;
|
|
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
|
|
|
|
msgs->buf[msgs->len-2] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
|
|
/* read n byte data */
|
|
result = i2c_imx_trx_complete(i2c_imx);
|
|
if (result)
|
|
return result;
|
|
|
|
if (is_lastmsg) {
|
|
/*
|
|
* It must generate STOP before read I2DR to prevent
|
|
* controller from generating another clock cycle
|
|
*/
|
|
dev_dbg(dev, "<%s> clear MSTA\n", __func__);
|
|
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
|
|
temp &= ~(I2CR_MSTA | I2CR_MTX);
|
|
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
|
|
i2c_imx_bus_busy(i2c_imx, 0);
|
|
} else {
|
|
/*
|
|
* For i2c master receiver repeat restart operation like:
|
|
* read -> repeat MSTA -> read/write
|
|
* The controller must set MTX before read the last byte in
|
|
* the first read operation, otherwise the first read cost
|
|
* one extra clock cycle.
|
|
*/
|
|
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
|
|
temp |= I2CR_MTX;
|
|
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
|
|
}
|
|
msgs->buf[msgs->len-1] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
|
|
{
|
|
int i, result;
|
|
|
|
dev_dbg(&i2c_imx->adapter.dev, "<%s> write slave address: addr=0x%x\n",
|
|
__func__, i2c_8bit_addr_from_msg(msgs));
|
|
|
|
/* write slave address */
|
|
imx_i2c_write_reg(i2c_8bit_addr_from_msg(msgs), i2c_imx, IMX_I2C_I2DR);
|
|
result = i2c_imx_trx_complete(i2c_imx);
|
|
if (result)
|
|
return result;
|
|
result = i2c_imx_acked(i2c_imx);
|
|
if (result)
|
|
return result;
|
|
dev_dbg(&i2c_imx->adapter.dev, "<%s> write data\n", __func__);
|
|
|
|
/* write data */
|
|
for (i = 0; i < msgs->len; i++) {
|
|
dev_dbg(&i2c_imx->adapter.dev,
|
|
"<%s> write byte: B%d=0x%X\n",
|
|
__func__, i, msgs->buf[i]);
|
|
imx_i2c_write_reg(msgs->buf[i], i2c_imx, IMX_I2C_I2DR);
|
|
result = i2c_imx_trx_complete(i2c_imx);
|
|
if (result)
|
|
return result;
|
|
result = i2c_imx_acked(i2c_imx);
|
|
if (result)
|
|
return result;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, bool is_lastmsg)
|
|
{
|
|
int i, result;
|
|
unsigned int temp;
|
|
int block_data = msgs->flags & I2C_M_RECV_LEN;
|
|
int use_dma = i2c_imx->dma && msgs->len >= DMA_THRESHOLD && !block_data;
|
|
|
|
dev_dbg(&i2c_imx->adapter.dev,
|
|
"<%s> write slave address: addr=0x%x\n",
|
|
__func__, i2c_8bit_addr_from_msg(msgs));
|
|
|
|
/* write slave address */
|
|
imx_i2c_write_reg(i2c_8bit_addr_from_msg(msgs), i2c_imx, IMX_I2C_I2DR);
|
|
result = i2c_imx_trx_complete(i2c_imx);
|
|
if (result)
|
|
return result;
|
|
result = i2c_imx_acked(i2c_imx);
|
|
if (result)
|
|
return result;
|
|
|
|
dev_dbg(&i2c_imx->adapter.dev, "<%s> setup bus\n", __func__);
|
|
|
|
/* setup bus to read data */
|
|
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
|
|
temp &= ~I2CR_MTX;
|
|
|
|
/*
|
|
* Reset the I2CR_TXAK flag initially for SMBus block read since the
|
|
* length is unknown
|
|
*/
|
|
if ((msgs->len - 1) || block_data)
|
|
temp &= ~I2CR_TXAK;
|
|
if (use_dma)
|
|
temp |= I2CR_DMAEN;
|
|
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
|
|
imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR); /* dummy read */
|
|
|
|
dev_dbg(&i2c_imx->adapter.dev, "<%s> read data\n", __func__);
|
|
|
|
if (use_dma)
|
|
return i2c_imx_dma_read(i2c_imx, msgs, is_lastmsg);
|
|
|
|
/* read data */
|
|
for (i = 0; i < msgs->len; i++) {
|
|
u8 len = 0;
|
|
|
|
result = i2c_imx_trx_complete(i2c_imx);
|
|
if (result)
|
|
return result;
|
|
/*
|
|
* First byte is the length of remaining packet
|
|
* in the SMBus block data read. Add it to
|
|
* msgs->len.
|
|
*/
|
|
if ((!i) && block_data) {
|
|
len = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
|
|
if ((len == 0) || (len > I2C_SMBUS_BLOCK_MAX))
|
|
return -EPROTO;
|
|
dev_dbg(&i2c_imx->adapter.dev,
|
|
"<%s> read length: 0x%X\n",
|
|
__func__, len);
|
|
msgs->len += len;
|
|
}
|
|
if (i == (msgs->len - 1)) {
|
|
if (is_lastmsg) {
|
|
/*
|
|
* It must generate STOP before read I2DR to prevent
|
|
* controller from generating another clock cycle
|
|
*/
|
|
dev_dbg(&i2c_imx->adapter.dev,
|
|
"<%s> clear MSTA\n", __func__);
|
|
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
|
|
temp &= ~(I2CR_MSTA | I2CR_MTX);
|
|
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
|
|
i2c_imx_bus_busy(i2c_imx, 0);
|
|
} else {
|
|
/*
|
|
* For i2c master receiver repeat restart operation like:
|
|
* read -> repeat MSTA -> read/write
|
|
* The controller must set MTX before read the last byte in
|
|
* the first read operation, otherwise the first read cost
|
|
* one extra clock cycle.
|
|
*/
|
|
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
|
|
temp |= I2CR_MTX;
|
|
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
|
|
}
|
|
} else if (i == (msgs->len - 2)) {
|
|
dev_dbg(&i2c_imx->adapter.dev,
|
|
"<%s> set TXAK\n", __func__);
|
|
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
|
|
temp |= I2CR_TXAK;
|
|
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
|
|
}
|
|
if ((!i) && block_data)
|
|
msgs->buf[0] = len;
|
|
else
|
|
msgs->buf[i] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
|
|
dev_dbg(&i2c_imx->adapter.dev,
|
|
"<%s> read byte: B%d=0x%X\n",
|
|
__func__, i, msgs->buf[i]);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_imx_xfer(struct i2c_adapter *adapter,
|
|
struct i2c_msg *msgs, int num)
|
|
{
|
|
unsigned int i, temp;
|
|
int result;
|
|
bool is_lastmsg = false;
|
|
struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(adapter);
|
|
|
|
dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
|
|
|
|
result = pm_runtime_get_sync(i2c_imx->adapter.dev.parent);
|
|
if (result < 0)
|
|
goto out;
|
|
|
|
/* Start I2C transfer */
|
|
result = i2c_imx_start(i2c_imx);
|
|
if (result) {
|
|
if (i2c_imx->adapter.bus_recovery_info) {
|
|
i2c_recover_bus(&i2c_imx->adapter);
|
|
result = i2c_imx_start(i2c_imx);
|
|
}
|
|
}
|
|
|
|
if (result)
|
|
goto fail0;
|
|
|
|
/* read/write data */
|
|
for (i = 0; i < num; i++) {
|
|
if (i == num - 1)
|
|
is_lastmsg = true;
|
|
|
|
if (i) {
|
|
dev_dbg(&i2c_imx->adapter.dev,
|
|
"<%s> repeated start\n", __func__);
|
|
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
|
|
temp |= I2CR_RSTA;
|
|
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
|
|
result = i2c_imx_bus_busy(i2c_imx, 1);
|
|
if (result)
|
|
goto fail0;
|
|
}
|
|
dev_dbg(&i2c_imx->adapter.dev,
|
|
"<%s> transfer message: %d\n", __func__, i);
|
|
/* write/read data */
|
|
#ifdef CONFIG_I2C_DEBUG_BUS
|
|
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
|
|
dev_dbg(&i2c_imx->adapter.dev,
|
|
"<%s> CONTROL: IEN=%d, IIEN=%d, MSTA=%d, MTX=%d, TXAK=%d, RSTA=%d\n",
|
|
__func__,
|
|
(temp & I2CR_IEN ? 1 : 0), (temp & I2CR_IIEN ? 1 : 0),
|
|
(temp & I2CR_MSTA ? 1 : 0), (temp & I2CR_MTX ? 1 : 0),
|
|
(temp & I2CR_TXAK ? 1 : 0), (temp & I2CR_RSTA ? 1 : 0));
|
|
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
|
|
dev_dbg(&i2c_imx->adapter.dev,
|
|
"<%s> STATUS: ICF=%d, IAAS=%d, IBB=%d, IAL=%d, SRW=%d, IIF=%d, RXAK=%d\n",
|
|
__func__,
|
|
(temp & I2SR_ICF ? 1 : 0), (temp & I2SR_IAAS ? 1 : 0),
|
|
(temp & I2SR_IBB ? 1 : 0), (temp & I2SR_IAL ? 1 : 0),
|
|
(temp & I2SR_SRW ? 1 : 0), (temp & I2SR_IIF ? 1 : 0),
|
|
(temp & I2SR_RXAK ? 1 : 0));
|
|
#endif
|
|
if (msgs[i].flags & I2C_M_RD)
|
|
result = i2c_imx_read(i2c_imx, &msgs[i], is_lastmsg);
|
|
else {
|
|
if (i2c_imx->dma && msgs[i].len >= DMA_THRESHOLD)
|
|
result = i2c_imx_dma_write(i2c_imx, &msgs[i]);
|
|
else
|
|
result = i2c_imx_write(i2c_imx, &msgs[i]);
|
|
}
|
|
if (result)
|
|
goto fail0;
|
|
}
|
|
|
|
fail0:
|
|
/* Stop I2C transfer */
|
|
i2c_imx_stop(i2c_imx);
|
|
|
|
pm_runtime_mark_last_busy(i2c_imx->adapter.dev.parent);
|
|
pm_runtime_put_autosuspend(i2c_imx->adapter.dev.parent);
|
|
|
|
out:
|
|
dev_dbg(&i2c_imx->adapter.dev, "<%s> exit with: %s: %d\n", __func__,
|
|
(result < 0) ? "error" : "success msg",
|
|
(result < 0) ? result : num);
|
|
return (result < 0) ? result : num;
|
|
}
|
|
|
|
static void i2c_imx_prepare_recovery(struct i2c_adapter *adap)
|
|
{
|
|
struct imx_i2c_struct *i2c_imx;
|
|
|
|
i2c_imx = container_of(adap, struct imx_i2c_struct, adapter);
|
|
|
|
pinctrl_select_state(i2c_imx->pinctrl, i2c_imx->pinctrl_pins_gpio);
|
|
}
|
|
|
|
static void i2c_imx_unprepare_recovery(struct i2c_adapter *adap)
|
|
{
|
|
struct imx_i2c_struct *i2c_imx;
|
|
|
|
i2c_imx = container_of(adap, struct imx_i2c_struct, adapter);
|
|
|
|
pinctrl_select_state(i2c_imx->pinctrl, i2c_imx->pinctrl_pins_default);
|
|
}
|
|
|
|
/*
|
|
* We switch SCL and SDA to their GPIO function and do some bitbanging
|
|
* for bus recovery. These alternative pinmux settings can be
|
|
* described in the device tree by a separate pinctrl state "gpio". If
|
|
* this is missing this is not a big problem, the only implication is
|
|
* that we can't do bus recovery.
|
|
*/
|
|
static int i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx,
|
|
struct platform_device *pdev)
|
|
{
|
|
struct i2c_bus_recovery_info *rinfo = &i2c_imx->rinfo;
|
|
|
|
i2c_imx->pinctrl = devm_pinctrl_get(&pdev->dev);
|
|
if (!i2c_imx->pinctrl || IS_ERR(i2c_imx->pinctrl)) {
|
|
dev_info(&pdev->dev, "can't get pinctrl, bus recovery not supported\n");
|
|
return PTR_ERR(i2c_imx->pinctrl);
|
|
}
|
|
|
|
i2c_imx->pinctrl_pins_default = pinctrl_lookup_state(i2c_imx->pinctrl,
|
|
PINCTRL_STATE_DEFAULT);
|
|
i2c_imx->pinctrl_pins_gpio = pinctrl_lookup_state(i2c_imx->pinctrl,
|
|
"gpio");
|
|
rinfo->sda_gpiod = devm_gpiod_get(&pdev->dev, "sda", GPIOD_IN);
|
|
rinfo->scl_gpiod = devm_gpiod_get(&pdev->dev, "scl", GPIOD_OUT_HIGH_OPEN_DRAIN);
|
|
|
|
if (PTR_ERR(rinfo->sda_gpiod) == -EPROBE_DEFER ||
|
|
PTR_ERR(rinfo->scl_gpiod) == -EPROBE_DEFER) {
|
|
return -EPROBE_DEFER;
|
|
} else if (IS_ERR(rinfo->sda_gpiod) ||
|
|
IS_ERR(rinfo->scl_gpiod) ||
|
|
IS_ERR(i2c_imx->pinctrl_pins_default) ||
|
|
IS_ERR(i2c_imx->pinctrl_pins_gpio)) {
|
|
dev_dbg(&pdev->dev, "recovery information incomplete\n");
|
|
return 0;
|
|
}
|
|
|
|
dev_dbg(&pdev->dev, "using scl%s for recovery\n",
|
|
rinfo->sda_gpiod ? ",sda" : "");
|
|
|
|
rinfo->prepare_recovery = i2c_imx_prepare_recovery;
|
|
rinfo->unprepare_recovery = i2c_imx_unprepare_recovery;
|
|
rinfo->recover_bus = i2c_generic_scl_recovery;
|
|
i2c_imx->adapter.bus_recovery_info = rinfo;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u32 i2c_imx_func(struct i2c_adapter *adapter)
|
|
{
|
|
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL
|
|
| I2C_FUNC_SMBUS_READ_BLOCK_DATA;
|
|
}
|
|
|
|
static const struct i2c_algorithm i2c_imx_algo = {
|
|
.master_xfer = i2c_imx_xfer,
|
|
.functionality = i2c_imx_func,
|
|
};
|
|
|
|
static int i2c_imx_probe(struct platform_device *pdev)
|
|
{
|
|
const struct of_device_id *of_id = of_match_device(i2c_imx_dt_ids,
|
|
&pdev->dev);
|
|
struct imx_i2c_struct *i2c_imx;
|
|
struct resource *res;
|
|
struct imxi2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
|
|
void __iomem *base;
|
|
int irq, ret;
|
|
dma_addr_t phy_addr;
|
|
|
|
dev_dbg(&pdev->dev, "<%s>\n", __func__);
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
dev_err(&pdev->dev, "can't get irq number\n");
|
|
return irq;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(base))
|
|
return PTR_ERR(base);
|
|
|
|
phy_addr = (dma_addr_t)res->start;
|
|
i2c_imx = devm_kzalloc(&pdev->dev, sizeof(*i2c_imx), GFP_KERNEL);
|
|
if (!i2c_imx)
|
|
return -ENOMEM;
|
|
|
|
if (of_id)
|
|
i2c_imx->hwdata = of_id->data;
|
|
else
|
|
i2c_imx->hwdata = (struct imx_i2c_hwdata *)
|
|
platform_get_device_id(pdev)->driver_data;
|
|
|
|
/* Setup i2c_imx driver structure */
|
|
strlcpy(i2c_imx->adapter.name, pdev->name, sizeof(i2c_imx->adapter.name));
|
|
i2c_imx->adapter.owner = THIS_MODULE;
|
|
i2c_imx->adapter.algo = &i2c_imx_algo;
|
|
i2c_imx->adapter.dev.parent = &pdev->dev;
|
|
i2c_imx->adapter.nr = pdev->id;
|
|
i2c_imx->adapter.dev.of_node = pdev->dev.of_node;
|
|
i2c_imx->base = base;
|
|
|
|
/* Get I2C clock */
|
|
i2c_imx->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(i2c_imx->clk)) {
|
|
dev_err(&pdev->dev, "can't get I2C clock\n");
|
|
return PTR_ERR(i2c_imx->clk);
|
|
}
|
|
|
|
ret = clk_prepare_enable(i2c_imx->clk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "can't enable I2C clock, ret=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Request IRQ */
|
|
ret = devm_request_irq(&pdev->dev, irq, i2c_imx_isr, IRQF_SHARED,
|
|
pdev->name, i2c_imx);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "can't claim irq %d\n", irq);
|
|
goto clk_disable;
|
|
}
|
|
|
|
/* Init queue */
|
|
init_waitqueue_head(&i2c_imx->queue);
|
|
|
|
/* Set up adapter data */
|
|
i2c_set_adapdata(&i2c_imx->adapter, i2c_imx);
|
|
|
|
/* Set up platform driver data */
|
|
platform_set_drvdata(pdev, i2c_imx);
|
|
|
|
pm_runtime_set_autosuspend_delay(&pdev->dev, I2C_PM_TIMEOUT);
|
|
pm_runtime_use_autosuspend(&pdev->dev);
|
|
pm_runtime_set_active(&pdev->dev);
|
|
pm_runtime_enable(&pdev->dev);
|
|
|
|
ret = pm_runtime_get_sync(&pdev->dev);
|
|
if (ret < 0)
|
|
goto rpm_disable;
|
|
|
|
/* Set up clock divider */
|
|
i2c_imx->bitrate = IMX_I2C_BIT_RATE;
|
|
ret = of_property_read_u32(pdev->dev.of_node,
|
|
"clock-frequency", &i2c_imx->bitrate);
|
|
if (ret < 0 && pdata && pdata->bitrate)
|
|
i2c_imx->bitrate = pdata->bitrate;
|
|
i2c_imx->clk_change_nb.notifier_call = i2c_imx_clk_notifier_call;
|
|
clk_notifier_register(i2c_imx->clk, &i2c_imx->clk_change_nb);
|
|
i2c_imx_set_clk(i2c_imx, clk_get_rate(i2c_imx->clk));
|
|
|
|
/* Set up chip registers to defaults */
|
|
imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN,
|
|
i2c_imx, IMX_I2C_I2CR);
|
|
imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR);
|
|
|
|
/* Init optional bus recovery function */
|
|
ret = i2c_imx_init_recovery_info(i2c_imx, pdev);
|
|
/* Give it another chance if pinctrl used is not ready yet */
|
|
if (ret == -EPROBE_DEFER)
|
|
goto clk_notifier_unregister;
|
|
|
|
/* Add I2C adapter */
|
|
ret = i2c_add_numbered_adapter(&i2c_imx->adapter);
|
|
if (ret < 0)
|
|
goto clk_notifier_unregister;
|
|
|
|
pm_runtime_mark_last_busy(&pdev->dev);
|
|
pm_runtime_put_autosuspend(&pdev->dev);
|
|
|
|
dev_dbg(&i2c_imx->adapter.dev, "claimed irq %d\n", irq);
|
|
dev_dbg(&i2c_imx->adapter.dev, "device resources: %pR\n", res);
|
|
dev_dbg(&i2c_imx->adapter.dev, "adapter name: \"%s\"\n",
|
|
i2c_imx->adapter.name);
|
|
dev_info(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n");
|
|
|
|
/* Init DMA config if supported */
|
|
i2c_imx_dma_request(i2c_imx, phy_addr);
|
|
|
|
return 0; /* Return OK */
|
|
|
|
clk_notifier_unregister:
|
|
clk_notifier_unregister(i2c_imx->clk, &i2c_imx->clk_change_nb);
|
|
rpm_disable:
|
|
pm_runtime_put_noidle(&pdev->dev);
|
|
pm_runtime_disable(&pdev->dev);
|
|
pm_runtime_set_suspended(&pdev->dev);
|
|
pm_runtime_dont_use_autosuspend(&pdev->dev);
|
|
|
|
clk_disable:
|
|
clk_disable_unprepare(i2c_imx->clk);
|
|
return ret;
|
|
}
|
|
|
|
static int i2c_imx_remove(struct platform_device *pdev)
|
|
{
|
|
struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev);
|
|
int ret;
|
|
|
|
ret = pm_runtime_get_sync(&pdev->dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* remove adapter */
|
|
dev_dbg(&i2c_imx->adapter.dev, "adapter removed\n");
|
|
i2c_del_adapter(&i2c_imx->adapter);
|
|
|
|
if (i2c_imx->dma)
|
|
i2c_imx_dma_free(i2c_imx);
|
|
|
|
/* setup chip registers to defaults */
|
|
imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IADR);
|
|
imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IFDR);
|
|
imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2CR);
|
|
imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2SR);
|
|
|
|
clk_notifier_unregister(i2c_imx->clk, &i2c_imx->clk_change_nb);
|
|
clk_disable_unprepare(i2c_imx->clk);
|
|
|
|
pm_runtime_put_noidle(&pdev->dev);
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int i2c_imx_runtime_suspend(struct device *dev)
|
|
{
|
|
struct imx_i2c_struct *i2c_imx = dev_get_drvdata(dev);
|
|
|
|
clk_disable(i2c_imx->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_imx_runtime_resume(struct device *dev)
|
|
{
|
|
struct imx_i2c_struct *i2c_imx = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = clk_enable(i2c_imx->clk);
|
|
if (ret)
|
|
dev_err(dev, "can't enable I2C clock, ret=%d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct dev_pm_ops i2c_imx_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(i2c_imx_runtime_suspend,
|
|
i2c_imx_runtime_resume, NULL)
|
|
};
|
|
#define I2C_IMX_PM_OPS (&i2c_imx_pm_ops)
|
|
#else
|
|
#define I2C_IMX_PM_OPS NULL
|
|
#endif /* CONFIG_PM */
|
|
|
|
static struct platform_driver i2c_imx_driver = {
|
|
.probe = i2c_imx_probe,
|
|
.remove = i2c_imx_remove,
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.pm = I2C_IMX_PM_OPS,
|
|
.of_match_table = i2c_imx_dt_ids,
|
|
},
|
|
.id_table = imx_i2c_devtype,
|
|
};
|
|
|
|
static int __init i2c_adap_imx_init(void)
|
|
{
|
|
return platform_driver_register(&i2c_imx_driver);
|
|
}
|
|
subsys_initcall(i2c_adap_imx_init);
|
|
|
|
static void __exit i2c_adap_imx_exit(void)
|
|
{
|
|
platform_driver_unregister(&i2c_imx_driver);
|
|
}
|
|
module_exit(i2c_adap_imx_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Darius Augulis");
|
|
MODULE_DESCRIPTION("I2C adapter driver for IMX I2C bus");
|
|
MODULE_ALIAS("platform:" DRIVER_NAME);
|