mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 10:49:33 +00:00
![Peter Rosin](/assets/img/avatar_default.png)
The i2c_lock_adapter name is ambiguous since it is unclear if it refers to the root adapter or the adapter you name in the argument. The natural interpretation is the adapter you name in the argument, but there are historical reasons for that not being the case; it in fact locks the root adapter. Just remove the function and force users to spell out the I2C_LOCK_ROOT_ADAPTER name to indicate what is really going on. Also remove i2c_unlock_adapter, of course. This patch was generated with git grep -l 'i2c_\(un\)\?lock_adapter' \ | xargs sed -i 's/i2c_\(un\)\?lock_adapter(\([^)]*\))/'\ 'i2c_\1lock_bus(\2, I2C_LOCK_ROOT_ADAPTER)/g' followed by white-space touch-up. Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com> Tested-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
661 lines
16 KiB
C
661 lines
16 KiB
C
/*
|
|
* Copyright (C) 2017 Spreadtrum Communications Inc.
|
|
*
|
|
* SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
|
|
#define I2C_CTL 0x00
|
|
#define I2C_ADDR_CFG 0x04
|
|
#define I2C_COUNT 0x08
|
|
#define I2C_RX 0x0c
|
|
#define I2C_TX 0x10
|
|
#define I2C_STATUS 0x14
|
|
#define I2C_HSMODE_CFG 0x18
|
|
#define I2C_VERSION 0x1c
|
|
#define ADDR_DVD0 0x20
|
|
#define ADDR_DVD1 0x24
|
|
#define ADDR_STA0_DVD 0x28
|
|
#define ADDR_RST 0x2c
|
|
|
|
/* I2C_CTL */
|
|
#define STP_EN BIT(20)
|
|
#define FIFO_AF_LVL_MASK GENMASK(19, 16)
|
|
#define FIFO_AF_LVL 16
|
|
#define FIFO_AE_LVL_MASK GENMASK(15, 12)
|
|
#define FIFO_AE_LVL 12
|
|
#define I2C_DMA_EN BIT(11)
|
|
#define FULL_INTEN BIT(10)
|
|
#define EMPTY_INTEN BIT(9)
|
|
#define I2C_DVD_OPT BIT(8)
|
|
#define I2C_OUT_OPT BIT(7)
|
|
#define I2C_TRIM_OPT BIT(6)
|
|
#define I2C_HS_MODE BIT(4)
|
|
#define I2C_MODE BIT(3)
|
|
#define I2C_EN BIT(2)
|
|
#define I2C_INT_EN BIT(1)
|
|
#define I2C_START BIT(0)
|
|
|
|
/* I2C_STATUS */
|
|
#define SDA_IN BIT(21)
|
|
#define SCL_IN BIT(20)
|
|
#define FIFO_FULL BIT(4)
|
|
#define FIFO_EMPTY BIT(3)
|
|
#define I2C_INT BIT(2)
|
|
#define I2C_RX_ACK BIT(1)
|
|
#define I2C_BUSY BIT(0)
|
|
|
|
/* ADDR_RST */
|
|
#define I2C_RST BIT(0)
|
|
|
|
#define I2C_FIFO_DEEP 12
|
|
#define I2C_FIFO_FULL_THLD 15
|
|
#define I2C_FIFO_EMPTY_THLD 4
|
|
#define I2C_DATA_STEP 8
|
|
#define I2C_ADDR_DVD0_CALC(high, low) \
|
|
((((high) & GENMASK(15, 0)) << 16) | ((low) & GENMASK(15, 0)))
|
|
#define I2C_ADDR_DVD1_CALC(high, low) \
|
|
(((high) & GENMASK(31, 16)) | (((low) & GENMASK(31, 16)) >> 16))
|
|
|
|
/* timeout (ms) for pm runtime autosuspend */
|
|
#define SPRD_I2C_PM_TIMEOUT 1000
|
|
|
|
/* SPRD i2c data structure */
|
|
struct sprd_i2c {
|
|
struct i2c_adapter adap;
|
|
struct device *dev;
|
|
void __iomem *base;
|
|
struct i2c_msg *msg;
|
|
struct clk *clk;
|
|
u32 src_clk;
|
|
u32 bus_freq;
|
|
struct completion complete;
|
|
u8 *buf;
|
|
u32 count;
|
|
int irq;
|
|
int err;
|
|
bool is_suspended;
|
|
};
|
|
|
|
static void sprd_i2c_set_count(struct sprd_i2c *i2c_dev, u32 count)
|
|
{
|
|
writel(count, i2c_dev->base + I2C_COUNT);
|
|
}
|
|
|
|
static void sprd_i2c_send_stop(struct sprd_i2c *i2c_dev, int stop)
|
|
{
|
|
u32 tmp = readl(i2c_dev->base + I2C_CTL);
|
|
|
|
if (stop)
|
|
writel(tmp & ~STP_EN, i2c_dev->base + I2C_CTL);
|
|
else
|
|
writel(tmp | STP_EN, i2c_dev->base + I2C_CTL);
|
|
}
|
|
|
|
static void sprd_i2c_clear_start(struct sprd_i2c *i2c_dev)
|
|
{
|
|
u32 tmp = readl(i2c_dev->base + I2C_CTL);
|
|
|
|
writel(tmp & ~I2C_START, i2c_dev->base + I2C_CTL);
|
|
}
|
|
|
|
static void sprd_i2c_clear_ack(struct sprd_i2c *i2c_dev)
|
|
{
|
|
u32 tmp = readl(i2c_dev->base + I2C_STATUS);
|
|
|
|
writel(tmp & ~I2C_RX_ACK, i2c_dev->base + I2C_STATUS);
|
|
}
|
|
|
|
static void sprd_i2c_clear_irq(struct sprd_i2c *i2c_dev)
|
|
{
|
|
u32 tmp = readl(i2c_dev->base + I2C_STATUS);
|
|
|
|
writel(tmp & ~I2C_INT, i2c_dev->base + I2C_STATUS);
|
|
}
|
|
|
|
static void sprd_i2c_reset_fifo(struct sprd_i2c *i2c_dev)
|
|
{
|
|
writel(I2C_RST, i2c_dev->base + ADDR_RST);
|
|
}
|
|
|
|
static void sprd_i2c_set_devaddr(struct sprd_i2c *i2c_dev, struct i2c_msg *m)
|
|
{
|
|
writel(m->addr << 1, i2c_dev->base + I2C_ADDR_CFG);
|
|
}
|
|
|
|
static void sprd_i2c_write_bytes(struct sprd_i2c *i2c_dev, u8 *buf, u32 len)
|
|
{
|
|
u32 i;
|
|
|
|
for (i = 0; i < len; i++)
|
|
writeb(buf[i], i2c_dev->base + I2C_TX);
|
|
}
|
|
|
|
static void sprd_i2c_read_bytes(struct sprd_i2c *i2c_dev, u8 *buf, u32 len)
|
|
{
|
|
u32 i;
|
|
|
|
for (i = 0; i < len; i++)
|
|
buf[i] = readb(i2c_dev->base + I2C_RX);
|
|
}
|
|
|
|
static void sprd_i2c_set_full_thld(struct sprd_i2c *i2c_dev, u32 full_thld)
|
|
{
|
|
u32 tmp = readl(i2c_dev->base + I2C_CTL);
|
|
|
|
tmp &= ~FIFO_AF_LVL_MASK;
|
|
tmp |= full_thld << FIFO_AF_LVL;
|
|
writel(tmp, i2c_dev->base + I2C_CTL);
|
|
};
|
|
|
|
static void sprd_i2c_set_empty_thld(struct sprd_i2c *i2c_dev, u32 empty_thld)
|
|
{
|
|
u32 tmp = readl(i2c_dev->base + I2C_CTL);
|
|
|
|
tmp &= ~FIFO_AE_LVL_MASK;
|
|
tmp |= empty_thld << FIFO_AE_LVL;
|
|
writel(tmp, i2c_dev->base + I2C_CTL);
|
|
};
|
|
|
|
static void sprd_i2c_set_fifo_full_int(struct sprd_i2c *i2c_dev, int enable)
|
|
{
|
|
u32 tmp = readl(i2c_dev->base + I2C_CTL);
|
|
|
|
if (enable)
|
|
tmp |= FULL_INTEN;
|
|
else
|
|
tmp &= ~FULL_INTEN;
|
|
|
|
writel(tmp, i2c_dev->base + I2C_CTL);
|
|
};
|
|
|
|
static void sprd_i2c_set_fifo_empty_int(struct sprd_i2c *i2c_dev, int enable)
|
|
{
|
|
u32 tmp = readl(i2c_dev->base + I2C_CTL);
|
|
|
|
if (enable)
|
|
tmp |= EMPTY_INTEN;
|
|
else
|
|
tmp &= ~EMPTY_INTEN;
|
|
|
|
writel(tmp, i2c_dev->base + I2C_CTL);
|
|
};
|
|
|
|
static void sprd_i2c_opt_start(struct sprd_i2c *i2c_dev)
|
|
{
|
|
u32 tmp = readl(i2c_dev->base + I2C_CTL);
|
|
|
|
writel(tmp | I2C_START, i2c_dev->base + I2C_CTL);
|
|
}
|
|
|
|
static void sprd_i2c_opt_mode(struct sprd_i2c *i2c_dev, int rw)
|
|
{
|
|
u32 cmd = readl(i2c_dev->base + I2C_CTL) & ~I2C_MODE;
|
|
|
|
writel(cmd | rw << 3, i2c_dev->base + I2C_CTL);
|
|
}
|
|
|
|
static void sprd_i2c_data_transfer(struct sprd_i2c *i2c_dev)
|
|
{
|
|
u32 i2c_count = i2c_dev->count;
|
|
u32 need_tran = i2c_count <= I2C_FIFO_DEEP ? i2c_count : I2C_FIFO_DEEP;
|
|
struct i2c_msg *msg = i2c_dev->msg;
|
|
|
|
if (msg->flags & I2C_M_RD) {
|
|
sprd_i2c_read_bytes(i2c_dev, i2c_dev->buf, I2C_FIFO_FULL_THLD);
|
|
i2c_dev->count -= I2C_FIFO_FULL_THLD;
|
|
i2c_dev->buf += I2C_FIFO_FULL_THLD;
|
|
|
|
/*
|
|
* If the read data count is larger than rx fifo full threshold,
|
|
* we should enable the rx fifo full interrupt to read data
|
|
* again.
|
|
*/
|
|
if (i2c_dev->count >= I2C_FIFO_FULL_THLD)
|
|
sprd_i2c_set_fifo_full_int(i2c_dev, 1);
|
|
} else {
|
|
sprd_i2c_write_bytes(i2c_dev, i2c_dev->buf, need_tran);
|
|
i2c_dev->buf += need_tran;
|
|
i2c_dev->count -= need_tran;
|
|
|
|
/*
|
|
* If the write data count is arger than tx fifo depth which
|
|
* means we can not write all data in one time, then we should
|
|
* enable the tx fifo empty interrupt to write again.
|
|
*/
|
|
if (i2c_count > I2C_FIFO_DEEP)
|
|
sprd_i2c_set_fifo_empty_int(i2c_dev, 1);
|
|
}
|
|
}
|
|
|
|
static int sprd_i2c_handle_msg(struct i2c_adapter *i2c_adap,
|
|
struct i2c_msg *msg, bool is_last_msg)
|
|
{
|
|
struct sprd_i2c *i2c_dev = i2c_adap->algo_data;
|
|
|
|
i2c_dev->msg = msg;
|
|
i2c_dev->buf = msg->buf;
|
|
i2c_dev->count = msg->len;
|
|
|
|
reinit_completion(&i2c_dev->complete);
|
|
sprd_i2c_reset_fifo(i2c_dev);
|
|
sprd_i2c_set_devaddr(i2c_dev, msg);
|
|
sprd_i2c_set_count(i2c_dev, msg->len);
|
|
|
|
if (msg->flags & I2C_M_RD) {
|
|
sprd_i2c_opt_mode(i2c_dev, 1);
|
|
sprd_i2c_send_stop(i2c_dev, 1);
|
|
} else {
|
|
sprd_i2c_opt_mode(i2c_dev, 0);
|
|
sprd_i2c_send_stop(i2c_dev, !!is_last_msg);
|
|
}
|
|
|
|
/*
|
|
* We should enable rx fifo full interrupt to get data when receiving
|
|
* full data.
|
|
*/
|
|
if (msg->flags & I2C_M_RD)
|
|
sprd_i2c_set_fifo_full_int(i2c_dev, 1);
|
|
else
|
|
sprd_i2c_data_transfer(i2c_dev);
|
|
|
|
sprd_i2c_opt_start(i2c_dev);
|
|
|
|
wait_for_completion(&i2c_dev->complete);
|
|
|
|
return i2c_dev->err;
|
|
}
|
|
|
|
static int sprd_i2c_master_xfer(struct i2c_adapter *i2c_adap,
|
|
struct i2c_msg *msgs, int num)
|
|
{
|
|
struct sprd_i2c *i2c_dev = i2c_adap->algo_data;
|
|
int im, ret;
|
|
|
|
if (i2c_dev->is_suspended)
|
|
return -EBUSY;
|
|
|
|
ret = pm_runtime_get_sync(i2c_dev->dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
for (im = 0; im < num - 1; im++) {
|
|
ret = sprd_i2c_handle_msg(i2c_adap, &msgs[im], 0);
|
|
if (ret)
|
|
goto err_msg;
|
|
}
|
|
|
|
ret = sprd_i2c_handle_msg(i2c_adap, &msgs[im++], 1);
|
|
|
|
err_msg:
|
|
pm_runtime_mark_last_busy(i2c_dev->dev);
|
|
pm_runtime_put_autosuspend(i2c_dev->dev);
|
|
|
|
return ret < 0 ? ret : im;
|
|
}
|
|
|
|
static u32 sprd_i2c_func(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
|
|
}
|
|
|
|
static const struct i2c_algorithm sprd_i2c_algo = {
|
|
.master_xfer = sprd_i2c_master_xfer,
|
|
.functionality = sprd_i2c_func,
|
|
};
|
|
|
|
static void sprd_i2c_set_clk(struct sprd_i2c *i2c_dev, u32 freq)
|
|
{
|
|
u32 apb_clk = i2c_dev->src_clk;
|
|
/*
|
|
* From I2C databook, the prescale calculation formula:
|
|
* prescale = freq_i2c / (4 * freq_scl) - 1;
|
|
*/
|
|
u32 i2c_dvd = apb_clk / (4 * freq) - 1;
|
|
/*
|
|
* From I2C databook, the high period of SCL clock is recommended as
|
|
* 40% (2/5), and the low period of SCL clock is recommended as 60%
|
|
* (3/5), then the formula should be:
|
|
* high = (prescale * 2 * 2) / 5
|
|
* low = (prescale * 2 * 3) / 5
|
|
*/
|
|
u32 high = ((i2c_dvd << 1) * 2) / 5;
|
|
u32 low = ((i2c_dvd << 1) * 3) / 5;
|
|
u32 div0 = I2C_ADDR_DVD0_CALC(high, low);
|
|
u32 div1 = I2C_ADDR_DVD1_CALC(high, low);
|
|
|
|
writel(div0, i2c_dev->base + ADDR_DVD0);
|
|
writel(div1, i2c_dev->base + ADDR_DVD1);
|
|
|
|
/* Start hold timing = hold time(us) * source clock */
|
|
if (freq == 400000)
|
|
writel((6 * apb_clk) / 10000000, i2c_dev->base + ADDR_STA0_DVD);
|
|
else if (freq == 100000)
|
|
writel((4 * apb_clk) / 1000000, i2c_dev->base + ADDR_STA0_DVD);
|
|
}
|
|
|
|
static void sprd_i2c_enable(struct sprd_i2c *i2c_dev)
|
|
{
|
|
u32 tmp = I2C_DVD_OPT;
|
|
|
|
writel(tmp, i2c_dev->base + I2C_CTL);
|
|
|
|
sprd_i2c_set_full_thld(i2c_dev, I2C_FIFO_FULL_THLD);
|
|
sprd_i2c_set_empty_thld(i2c_dev, I2C_FIFO_EMPTY_THLD);
|
|
|
|
sprd_i2c_set_clk(i2c_dev, i2c_dev->bus_freq);
|
|
sprd_i2c_reset_fifo(i2c_dev);
|
|
sprd_i2c_clear_irq(i2c_dev);
|
|
|
|
tmp = readl(i2c_dev->base + I2C_CTL);
|
|
writel(tmp | I2C_EN | I2C_INT_EN, i2c_dev->base + I2C_CTL);
|
|
}
|
|
|
|
static irqreturn_t sprd_i2c_isr_thread(int irq, void *dev_id)
|
|
{
|
|
struct sprd_i2c *i2c_dev = dev_id;
|
|
struct i2c_msg *msg = i2c_dev->msg;
|
|
bool ack = !(readl(i2c_dev->base + I2C_STATUS) & I2C_RX_ACK);
|
|
u32 i2c_tran;
|
|
|
|
if (msg->flags & I2C_M_RD)
|
|
i2c_tran = i2c_dev->count >= I2C_FIFO_FULL_THLD;
|
|
else
|
|
i2c_tran = i2c_dev->count;
|
|
|
|
/*
|
|
* If we got one ACK from slave when writing data, and we did not
|
|
* finish this transmission (i2c_tran is not zero), then we should
|
|
* continue to write data.
|
|
*
|
|
* For reading data, ack is always true, if i2c_tran is not 0 which
|
|
* means we still need to contine to read data from slave.
|
|
*/
|
|
if (i2c_tran && ack) {
|
|
sprd_i2c_data_transfer(i2c_dev);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
i2c_dev->err = 0;
|
|
|
|
/*
|
|
* If we did not get one ACK from slave when writing data, we should
|
|
* return -EIO to notify users.
|
|
*/
|
|
if (!ack)
|
|
i2c_dev->err = -EIO;
|
|
else if (msg->flags & I2C_M_RD && i2c_dev->count)
|
|
sprd_i2c_read_bytes(i2c_dev, i2c_dev->buf, i2c_dev->count);
|
|
|
|
/* Transmission is done and clear ack and start operation */
|
|
sprd_i2c_clear_ack(i2c_dev);
|
|
sprd_i2c_clear_start(i2c_dev);
|
|
complete(&i2c_dev->complete);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t sprd_i2c_isr(int irq, void *dev_id)
|
|
{
|
|
struct sprd_i2c *i2c_dev = dev_id;
|
|
struct i2c_msg *msg = i2c_dev->msg;
|
|
bool ack = !(readl(i2c_dev->base + I2C_STATUS) & I2C_RX_ACK);
|
|
u32 i2c_tran;
|
|
|
|
if (msg->flags & I2C_M_RD)
|
|
i2c_tran = i2c_dev->count >= I2C_FIFO_FULL_THLD;
|
|
else
|
|
i2c_tran = i2c_dev->count;
|
|
|
|
/*
|
|
* If we did not get one ACK from slave when writing data, then we
|
|
* should finish this transmission since we got some errors.
|
|
*
|
|
* When writing data, if i2c_tran == 0 which means we have writen
|
|
* done all data, then we can finish this transmission.
|
|
*
|
|
* When reading data, if conut < rx fifo full threshold, which
|
|
* means we can read all data in one time, then we can finish this
|
|
* transmission too.
|
|
*/
|
|
if (!i2c_tran || !ack) {
|
|
sprd_i2c_clear_start(i2c_dev);
|
|
sprd_i2c_clear_irq(i2c_dev);
|
|
}
|
|
|
|
sprd_i2c_set_fifo_empty_int(i2c_dev, 0);
|
|
sprd_i2c_set_fifo_full_int(i2c_dev, 0);
|
|
|
|
return IRQ_WAKE_THREAD;
|
|
}
|
|
|
|
static int sprd_i2c_clk_init(struct sprd_i2c *i2c_dev)
|
|
{
|
|
struct clk *clk_i2c, *clk_parent;
|
|
|
|
clk_i2c = devm_clk_get(i2c_dev->dev, "i2c");
|
|
if (IS_ERR(clk_i2c)) {
|
|
dev_warn(i2c_dev->dev, "i2c%d can't get the i2c clock\n",
|
|
i2c_dev->adap.nr);
|
|
clk_i2c = NULL;
|
|
}
|
|
|
|
clk_parent = devm_clk_get(i2c_dev->dev, "source");
|
|
if (IS_ERR(clk_parent)) {
|
|
dev_warn(i2c_dev->dev, "i2c%d can't get the source clock\n",
|
|
i2c_dev->adap.nr);
|
|
clk_parent = NULL;
|
|
}
|
|
|
|
if (clk_set_parent(clk_i2c, clk_parent))
|
|
i2c_dev->src_clk = clk_get_rate(clk_i2c);
|
|
else
|
|
i2c_dev->src_clk = 26000000;
|
|
|
|
dev_dbg(i2c_dev->dev, "i2c%d set source clock is %d\n",
|
|
i2c_dev->adap.nr, i2c_dev->src_clk);
|
|
|
|
i2c_dev->clk = devm_clk_get(i2c_dev->dev, "enable");
|
|
if (IS_ERR(i2c_dev->clk)) {
|
|
dev_warn(i2c_dev->dev, "i2c%d can't get the enable clock\n",
|
|
i2c_dev->adap.nr);
|
|
i2c_dev->clk = NULL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sprd_i2c_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct sprd_i2c *i2c_dev;
|
|
struct resource *res;
|
|
u32 prop;
|
|
int ret;
|
|
|
|
pdev->id = of_alias_get_id(dev->of_node, "i2c");
|
|
|
|
i2c_dev = devm_kzalloc(dev, sizeof(struct sprd_i2c), GFP_KERNEL);
|
|
if (!i2c_dev)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
i2c_dev->base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(i2c_dev->base))
|
|
return PTR_ERR(i2c_dev->base);
|
|
|
|
i2c_dev->irq = platform_get_irq(pdev, 0);
|
|
if (i2c_dev->irq < 0) {
|
|
dev_err(&pdev->dev, "failed to get irq resource\n");
|
|
return i2c_dev->irq;
|
|
}
|
|
|
|
i2c_set_adapdata(&i2c_dev->adap, i2c_dev);
|
|
init_completion(&i2c_dev->complete);
|
|
snprintf(i2c_dev->adap.name, sizeof(i2c_dev->adap.name),
|
|
"%s", "sprd-i2c");
|
|
|
|
i2c_dev->bus_freq = 100000;
|
|
i2c_dev->adap.owner = THIS_MODULE;
|
|
i2c_dev->dev = dev;
|
|
i2c_dev->adap.retries = 3;
|
|
i2c_dev->adap.algo = &sprd_i2c_algo;
|
|
i2c_dev->adap.algo_data = i2c_dev;
|
|
i2c_dev->adap.dev.parent = dev;
|
|
i2c_dev->adap.nr = pdev->id;
|
|
i2c_dev->adap.dev.of_node = dev->of_node;
|
|
|
|
if (!of_property_read_u32(dev->of_node, "clock-frequency", &prop))
|
|
i2c_dev->bus_freq = prop;
|
|
|
|
/* We only support 100k and 400k now, otherwise will return error. */
|
|
if (i2c_dev->bus_freq != 100000 && i2c_dev->bus_freq != 400000)
|
|
return -EINVAL;
|
|
|
|
sprd_i2c_clk_init(i2c_dev);
|
|
platform_set_drvdata(pdev, i2c_dev);
|
|
|
|
ret = clk_prepare_enable(i2c_dev->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
sprd_i2c_enable(i2c_dev);
|
|
|
|
pm_runtime_set_autosuspend_delay(i2c_dev->dev, SPRD_I2C_PM_TIMEOUT);
|
|
pm_runtime_use_autosuspend(i2c_dev->dev);
|
|
pm_runtime_set_active(i2c_dev->dev);
|
|
pm_runtime_enable(i2c_dev->dev);
|
|
|
|
ret = pm_runtime_get_sync(i2c_dev->dev);
|
|
if (ret < 0)
|
|
goto err_rpm_put;
|
|
|
|
ret = devm_request_threaded_irq(dev, i2c_dev->irq,
|
|
sprd_i2c_isr, sprd_i2c_isr_thread,
|
|
IRQF_NO_SUSPEND | IRQF_ONESHOT,
|
|
pdev->name, i2c_dev);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to request irq %d\n", i2c_dev->irq);
|
|
goto err_rpm_put;
|
|
}
|
|
|
|
ret = i2c_add_numbered_adapter(&i2c_dev->adap);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "add adapter failed\n");
|
|
goto err_rpm_put;
|
|
}
|
|
|
|
pm_runtime_mark_last_busy(i2c_dev->dev);
|
|
pm_runtime_put_autosuspend(i2c_dev->dev);
|
|
return 0;
|
|
|
|
err_rpm_put:
|
|
pm_runtime_put_noidle(i2c_dev->dev);
|
|
pm_runtime_disable(i2c_dev->dev);
|
|
clk_disable_unprepare(i2c_dev->clk);
|
|
return ret;
|
|
}
|
|
|
|
static int sprd_i2c_remove(struct platform_device *pdev)
|
|
{
|
|
struct sprd_i2c *i2c_dev = platform_get_drvdata(pdev);
|
|
int ret;
|
|
|
|
ret = pm_runtime_get_sync(i2c_dev->dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
i2c_del_adapter(&i2c_dev->adap);
|
|
clk_disable_unprepare(i2c_dev->clk);
|
|
|
|
pm_runtime_put_noidle(i2c_dev->dev);
|
|
pm_runtime_disable(i2c_dev->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused sprd_i2c_suspend_noirq(struct device *pdev)
|
|
{
|
|
struct sprd_i2c *i2c_dev = dev_get_drvdata(pdev);
|
|
|
|
i2c_lock_bus(&i2c_dev->adap, I2C_LOCK_ROOT_ADAPTER);
|
|
i2c_dev->is_suspended = true;
|
|
i2c_unlock_bus(&i2c_dev->adap, I2C_LOCK_ROOT_ADAPTER);
|
|
|
|
return pm_runtime_force_suspend(pdev);
|
|
}
|
|
|
|
static int __maybe_unused sprd_i2c_resume_noirq(struct device *pdev)
|
|
{
|
|
struct sprd_i2c *i2c_dev = dev_get_drvdata(pdev);
|
|
|
|
i2c_lock_bus(&i2c_dev->adap, I2C_LOCK_ROOT_ADAPTER);
|
|
i2c_dev->is_suspended = false;
|
|
i2c_unlock_bus(&i2c_dev->adap, I2C_LOCK_ROOT_ADAPTER);
|
|
|
|
return pm_runtime_force_resume(pdev);
|
|
}
|
|
|
|
static int __maybe_unused sprd_i2c_runtime_suspend(struct device *pdev)
|
|
{
|
|
struct sprd_i2c *i2c_dev = dev_get_drvdata(pdev);
|
|
|
|
clk_disable_unprepare(i2c_dev->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused sprd_i2c_runtime_resume(struct device *pdev)
|
|
{
|
|
struct sprd_i2c *i2c_dev = dev_get_drvdata(pdev);
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(i2c_dev->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
sprd_i2c_enable(i2c_dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops sprd_i2c_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(sprd_i2c_runtime_suspend,
|
|
sprd_i2c_runtime_resume, NULL)
|
|
|
|
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(sprd_i2c_suspend_noirq,
|
|
sprd_i2c_resume_noirq)
|
|
};
|
|
|
|
static const struct of_device_id sprd_i2c_of_match[] = {
|
|
{ .compatible = "sprd,sc9860-i2c", },
|
|
{},
|
|
};
|
|
|
|
static struct platform_driver sprd_i2c_driver = {
|
|
.probe = sprd_i2c_probe,
|
|
.remove = sprd_i2c_remove,
|
|
.driver = {
|
|
.name = "sprd-i2c",
|
|
.of_match_table = sprd_i2c_of_match,
|
|
.pm = &sprd_i2c_pm_ops,
|
|
},
|
|
};
|
|
|
|
static int sprd_i2c_init(void)
|
|
{
|
|
return platform_driver_register(&sprd_i2c_driver);
|
|
}
|
|
arch_initcall_sync(sprd_i2c_init);
|