mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 19:00:25 +00:00
![Martin Blumenstingl](/assets/img/avatar_default.png)
The USB HCD core driver parses the device-tree node for "phys" and "usb-phys" properties. It also manages the power state of these PHYs automatically. However, drivers may opt-out of this behavior by setting "phy" or "usb_phy" in struct usb_hcd to a non-null value. An example where this is required is the "Qualcomm USB2 controller", implemented by the chipidea driver. The hardware requires that the PHY is only powered on after the "reset completed" event from the controller is received. A follow-up patch will allow the USB HCD core driver to manage more than one PHY. Add a new "skip_phy_initialization" bitflag to struct usb_hcd so drivers can opt-out of any PHY management provided by the USB HCD core driver. This also updates the existing drivers so they use the new flag if they want to opt out of the PHY management provided by the USB HCD core driver. This means that for these drivers the new "multiple PHY" handling (which will be added in a follow-up patch) will be disabled as well. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Peter Chen <peter.chen@nxp.com> Tested-by: Neil Armstrong <narmstrong@baylibre.con> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
707 lines
18 KiB
C
707 lines
18 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2005-2009 MontaVista Software, Inc.
|
|
* Copyright 2008,2012,2015 Freescale Semiconductor, Inc.
|
|
*
|
|
* Ported to 834x by Randy Vinson <rvinson@mvista.com> using code provided
|
|
* by Hunter Wu.
|
|
* Power Management support by Dave Liu <daveliu@freescale.com>,
|
|
* Jerry Huang <Chang-Ming.Huang@freescale.com> and
|
|
* Anton Vorontsov <avorontsov@ru.mvista.com>.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/err.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/ehci_def.h>
|
|
#include <linux/usb/hcd.h>
|
|
#include <linux/usb/otg.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/fsl_devices.h>
|
|
#include <linux/of_platform.h>
|
|
|
|
#include "ehci.h"
|
|
#include "ehci-fsl.h"
|
|
|
|
#define DRIVER_DESC "Freescale EHCI Host controller driver"
|
|
#define DRV_NAME "ehci-fsl"
|
|
|
|
static struct hc_driver __read_mostly fsl_ehci_hc_driver;
|
|
|
|
/* configure so an HC device and id are always provided */
|
|
/* always called with process context; sleeping is OK */
|
|
|
|
/*
|
|
* fsl_ehci_drv_probe - initialize FSL-based HCDs
|
|
* @pdev: USB Host Controller being probed
|
|
* Context: !in_interrupt()
|
|
*
|
|
* Allocates basic resources for this USB host controller.
|
|
*
|
|
*/
|
|
static int fsl_ehci_drv_probe(struct platform_device *pdev)
|
|
{
|
|
struct fsl_usb2_platform_data *pdata;
|
|
struct usb_hcd *hcd;
|
|
struct resource *res;
|
|
int irq;
|
|
int retval;
|
|
|
|
pr_debug("initializing FSL-SOC USB Controller\n");
|
|
|
|
/* Need platform data for setup */
|
|
pdata = dev_get_platdata(&pdev->dev);
|
|
if (!pdata) {
|
|
dev_err(&pdev->dev,
|
|
"No platform data for %s.\n", dev_name(&pdev->dev));
|
|
return -ENODEV;
|
|
}
|
|
|
|
/*
|
|
* This is a host mode driver, verify that we're supposed to be
|
|
* in host mode.
|
|
*/
|
|
if (!((pdata->operating_mode == FSL_USB2_DR_HOST) ||
|
|
(pdata->operating_mode == FSL_USB2_MPH_HOST) ||
|
|
(pdata->operating_mode == FSL_USB2_DR_OTG))) {
|
|
dev_err(&pdev->dev,
|
|
"Non Host Mode configured for %s. Wrong driver linked.\n",
|
|
dev_name(&pdev->dev));
|
|
return -ENODEV;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
|
|
if (!res) {
|
|
dev_err(&pdev->dev,
|
|
"Found HC with no IRQ. Check %s setup!\n",
|
|
dev_name(&pdev->dev));
|
|
return -ENODEV;
|
|
}
|
|
irq = res->start;
|
|
|
|
hcd = __usb_create_hcd(&fsl_ehci_hc_driver, pdev->dev.parent,
|
|
&pdev->dev, dev_name(&pdev->dev), NULL);
|
|
if (!hcd) {
|
|
retval = -ENOMEM;
|
|
goto err1;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
hcd->regs = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(hcd->regs)) {
|
|
retval = PTR_ERR(hcd->regs);
|
|
goto err2;
|
|
}
|
|
|
|
hcd->rsrc_start = res->start;
|
|
hcd->rsrc_len = resource_size(res);
|
|
|
|
pdata->regs = hcd->regs;
|
|
|
|
if (pdata->power_budget)
|
|
hcd->power_budget = pdata->power_budget;
|
|
|
|
/*
|
|
* do platform specific init: check the clock, grab/config pins, etc.
|
|
*/
|
|
if (pdata->init && pdata->init(pdev)) {
|
|
retval = -ENODEV;
|
|
goto err2;
|
|
}
|
|
|
|
/* Enable USB controller, 83xx or 8536 */
|
|
if (pdata->have_sysif_regs && pdata->controller_ver < FSL_USB_VER_1_6)
|
|
clrsetbits_be32(hcd->regs + FSL_SOC_USB_CTRL,
|
|
CONTROL_REGISTER_W1C_MASK, 0x4);
|
|
|
|
/*
|
|
* Enable UTMI phy and program PTS field in UTMI mode before asserting
|
|
* controller reset for USB Controller version 2.5
|
|
*/
|
|
if (pdata->has_fsl_erratum_a007792) {
|
|
clrsetbits_be32(hcd->regs + FSL_SOC_USB_CTRL,
|
|
CONTROL_REGISTER_W1C_MASK, CTRL_UTMI_PHY_EN);
|
|
writel(PORT_PTS_UTMI, hcd->regs + FSL_SOC_USB_PORTSC1);
|
|
}
|
|
|
|
/* Don't need to set host mode here. It will be done by tdi_reset() */
|
|
|
|
retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
|
|
if (retval != 0)
|
|
goto err2;
|
|
device_wakeup_enable(hcd->self.controller);
|
|
|
|
#ifdef CONFIG_USB_OTG
|
|
if (pdata->operating_mode == FSL_USB2_DR_OTG) {
|
|
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
|
|
|
hcd->usb_phy = usb_get_phy(USB_PHY_TYPE_USB2);
|
|
dev_dbg(&pdev->dev, "hcd=0x%p ehci=0x%p, phy=0x%p\n",
|
|
hcd, ehci, hcd->usb_phy);
|
|
|
|
if (!IS_ERR_OR_NULL(hcd->usb_phy)) {
|
|
retval = otg_set_host(hcd->usb_phy->otg,
|
|
&ehci_to_hcd(ehci)->self);
|
|
if (retval) {
|
|
usb_put_phy(hcd->usb_phy);
|
|
goto err2;
|
|
}
|
|
} else {
|
|
dev_err(&pdev->dev, "can't find phy\n");
|
|
retval = -ENODEV;
|
|
goto err2;
|
|
}
|
|
|
|
hcd->skip_phy_initialization = 1;
|
|
}
|
|
#endif
|
|
return retval;
|
|
|
|
err2:
|
|
usb_put_hcd(hcd);
|
|
err1:
|
|
dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), retval);
|
|
if (pdata->exit)
|
|
pdata->exit(pdev);
|
|
return retval;
|
|
}
|
|
|
|
static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
|
|
enum fsl_usb2_phy_modes phy_mode,
|
|
unsigned int port_offset)
|
|
{
|
|
u32 portsc;
|
|
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
|
void __iomem *non_ehci = hcd->regs;
|
|
struct device *dev = hcd->self.controller;
|
|
struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev);
|
|
|
|
if (pdata->controller_ver < 0) {
|
|
dev_warn(hcd->self.controller, "Could not get controller version\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]);
|
|
portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW);
|
|
|
|
switch (phy_mode) {
|
|
case FSL_USB2_PHY_ULPI:
|
|
if (pdata->have_sysif_regs && pdata->controller_ver) {
|
|
/* controller version 1.6 or above */
|
|
clrbits32(non_ehci + FSL_SOC_USB_CTRL,
|
|
CONTROL_REGISTER_W1C_MASK | UTMI_PHY_EN);
|
|
clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
|
|
CONTROL_REGISTER_W1C_MASK,
|
|
ULPI_PHY_CLK_SEL | USB_CTRL_USB_EN);
|
|
}
|
|
portsc |= PORT_PTS_ULPI;
|
|
break;
|
|
case FSL_USB2_PHY_SERIAL:
|
|
portsc |= PORT_PTS_SERIAL;
|
|
break;
|
|
case FSL_USB2_PHY_UTMI_WIDE:
|
|
portsc |= PORT_PTS_PTW;
|
|
/* fall through */
|
|
case FSL_USB2_PHY_UTMI:
|
|
case FSL_USB2_PHY_UTMI_DUAL:
|
|
if (pdata->have_sysif_regs && pdata->controller_ver) {
|
|
/* controller version 1.6 or above */
|
|
clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
|
|
CONTROL_REGISTER_W1C_MASK, UTMI_PHY_EN);
|
|
mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI PHY CLK to
|
|
become stable - 10ms*/
|
|
}
|
|
/* enable UTMI PHY */
|
|
if (pdata->have_sysif_regs)
|
|
clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
|
|
CONTROL_REGISTER_W1C_MASK,
|
|
CTRL_UTMI_PHY_EN);
|
|
portsc |= PORT_PTS_UTMI;
|
|
break;
|
|
case FSL_USB2_PHY_NONE:
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* check PHY_CLK_VALID to determine phy clock presence before writing
|
|
* to portsc
|
|
*/
|
|
if (pdata->check_phy_clk_valid) {
|
|
if (!(ioread32be(non_ehci + FSL_SOC_USB_CTRL) &
|
|
PHY_CLK_VALID)) {
|
|
dev_warn(hcd->self.controller,
|
|
"USB PHY clock invalid\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
|
|
|
|
if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs)
|
|
clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
|
|
CONTROL_REGISTER_W1C_MASK, USB_CTRL_USB_EN);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ehci_fsl_usb_setup(struct ehci_hcd *ehci)
|
|
{
|
|
struct usb_hcd *hcd = ehci_to_hcd(ehci);
|
|
struct fsl_usb2_platform_data *pdata;
|
|
void __iomem *non_ehci = hcd->regs;
|
|
|
|
pdata = dev_get_platdata(hcd->self.controller);
|
|
|
|
if (pdata->have_sysif_regs) {
|
|
/*
|
|
* Turn on cache snooping hardware, since some PowerPC platforms
|
|
* wholly rely on hardware to deal with cache coherent
|
|
*/
|
|
|
|
/* Setup Snooping for all the 4GB space */
|
|
/* SNOOP1 starts from 0x0, size 2G */
|
|
iowrite32be(0x0 | SNOOP_SIZE_2GB,
|
|
non_ehci + FSL_SOC_USB_SNOOP1);
|
|
/* SNOOP2 starts from 0x80000000, size 2G */
|
|
iowrite32be(0x80000000 | SNOOP_SIZE_2GB,
|
|
non_ehci + FSL_SOC_USB_SNOOP2);
|
|
}
|
|
|
|
/* Deal with USB erratum A-005275 */
|
|
if (pdata->has_fsl_erratum_a005275 == 1)
|
|
ehci->has_fsl_hs_errata = 1;
|
|
|
|
if (pdata->has_fsl_erratum_a005697 == 1)
|
|
ehci->has_fsl_susp_errata = 1;
|
|
|
|
if ((pdata->operating_mode == FSL_USB2_DR_HOST) ||
|
|
(pdata->operating_mode == FSL_USB2_DR_OTG))
|
|
if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0))
|
|
return -EINVAL;
|
|
|
|
if (pdata->operating_mode == FSL_USB2_MPH_HOST) {
|
|
unsigned int chip, rev, svr;
|
|
|
|
svr = mfspr(SPRN_SVR);
|
|
chip = svr >> 16;
|
|
rev = (svr >> 4) & 0xf;
|
|
|
|
/* Deal with USB Erratum #14 on MPC834x Rev 1.0 & 1.1 chips */
|
|
if ((rev == 1) && (chip >= 0x8050) && (chip <= 0x8055))
|
|
ehci->has_fsl_port_bug = 1;
|
|
|
|
if (pdata->port_enables & FSL_USB2_PORT0_ENABLED)
|
|
if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0))
|
|
return -EINVAL;
|
|
|
|
if (pdata->port_enables & FSL_USB2_PORT1_ENABLED)
|
|
if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 1))
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (pdata->have_sysif_regs) {
|
|
#ifdef CONFIG_FSL_SOC_BOOKE
|
|
iowrite32be(0x00000008, non_ehci + FSL_SOC_USB_PRICTRL);
|
|
iowrite32be(0x00000080, non_ehci + FSL_SOC_USB_AGECNTTHRSH);
|
|
#else
|
|
iowrite32be(0x0000000c, non_ehci + FSL_SOC_USB_PRICTRL);
|
|
iowrite32be(0x00000040, non_ehci + FSL_SOC_USB_AGECNTTHRSH);
|
|
#endif
|
|
iowrite32be(0x00000001, non_ehci + FSL_SOC_USB_SICTRL);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* called after powerup, by probe or system-pm "wakeup" */
|
|
static int ehci_fsl_reinit(struct ehci_hcd *ehci)
|
|
{
|
|
if (ehci_fsl_usb_setup(ehci))
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* called during probe() after chip reset completes */
|
|
static int ehci_fsl_setup(struct usb_hcd *hcd)
|
|
{
|
|
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
|
int retval;
|
|
struct fsl_usb2_platform_data *pdata;
|
|
struct device *dev;
|
|
|
|
dev = hcd->self.controller;
|
|
pdata = dev_get_platdata(hcd->self.controller);
|
|
ehci->big_endian_desc = pdata->big_endian_desc;
|
|
ehci->big_endian_mmio = pdata->big_endian_mmio;
|
|
|
|
/* EHCI registers start at offset 0x100 */
|
|
ehci->caps = hcd->regs + 0x100;
|
|
|
|
#ifdef CONFIG_PPC_83xx
|
|
/*
|
|
* Deal with MPC834X that need port power to be cycled after the power
|
|
* fault condition is removed. Otherwise the state machine does not
|
|
* reflect PORTSC[CSC] correctly.
|
|
*/
|
|
ehci->need_oc_pp_cycle = 1;
|
|
#endif
|
|
|
|
hcd->has_tt = 1;
|
|
|
|
retval = ehci_setup(hcd);
|
|
if (retval)
|
|
return retval;
|
|
|
|
if (of_device_is_compatible(dev->parent->of_node,
|
|
"fsl,mpc5121-usb2-dr")) {
|
|
/*
|
|
* set SBUSCFG:AHBBRST so that control msgs don't
|
|
* fail when doing heavy PATA writes.
|
|
*/
|
|
ehci_writel(ehci, SBUSCFG_INCR8,
|
|
hcd->regs + FSL_SOC_USB_SBUSCFG);
|
|
}
|
|
|
|
retval = ehci_fsl_reinit(ehci);
|
|
return retval;
|
|
}
|
|
|
|
struct ehci_fsl {
|
|
struct ehci_hcd ehci;
|
|
|
|
#ifdef CONFIG_PM
|
|
/* Saved USB PHY settings, need to restore after deep sleep. */
|
|
u32 usb_ctrl;
|
|
#endif
|
|
};
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
#ifdef CONFIG_PPC_MPC512x
|
|
static int ehci_fsl_mpc512x_drv_suspend(struct device *dev)
|
|
{
|
|
struct usb_hcd *hcd = dev_get_drvdata(dev);
|
|
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
|
struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev);
|
|
u32 tmp;
|
|
|
|
#ifdef CONFIG_DYNAMIC_DEBUG
|
|
u32 mode = ehci_readl(ehci, hcd->regs + FSL_SOC_USB_USBMODE);
|
|
mode &= USBMODE_CM_MASK;
|
|
tmp = ehci_readl(ehci, hcd->regs + 0x140); /* usbcmd */
|
|
|
|
dev_dbg(dev, "suspend=%d already_suspended=%d "
|
|
"mode=%d usbcmd %08x\n", pdata->suspended,
|
|
pdata->already_suspended, mode, tmp);
|
|
#endif
|
|
|
|
/*
|
|
* If the controller is already suspended, then this must be a
|
|
* PM suspend. Remember this fact, so that we will leave the
|
|
* controller suspended at PM resume time.
|
|
*/
|
|
if (pdata->suspended) {
|
|
dev_dbg(dev, "already suspended, leaving early\n");
|
|
pdata->already_suspended = 1;
|
|
return 0;
|
|
}
|
|
|
|
dev_dbg(dev, "suspending...\n");
|
|
|
|
ehci->rh_state = EHCI_RH_SUSPENDED;
|
|
dev->power.power_state = PMSG_SUSPEND;
|
|
|
|
/* ignore non-host interrupts */
|
|
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
|
|
|
|
/* stop the controller */
|
|
tmp = ehci_readl(ehci, &ehci->regs->command);
|
|
tmp &= ~CMD_RUN;
|
|
ehci_writel(ehci, tmp, &ehci->regs->command);
|
|
|
|
/* save EHCI registers */
|
|
pdata->pm_command = ehci_readl(ehci, &ehci->regs->command);
|
|
pdata->pm_command &= ~CMD_RUN;
|
|
pdata->pm_status = ehci_readl(ehci, &ehci->regs->status);
|
|
pdata->pm_intr_enable = ehci_readl(ehci, &ehci->regs->intr_enable);
|
|
pdata->pm_frame_index = ehci_readl(ehci, &ehci->regs->frame_index);
|
|
pdata->pm_segment = ehci_readl(ehci, &ehci->regs->segment);
|
|
pdata->pm_frame_list = ehci_readl(ehci, &ehci->regs->frame_list);
|
|
pdata->pm_async_next = ehci_readl(ehci, &ehci->regs->async_next);
|
|
pdata->pm_configured_flag =
|
|
ehci_readl(ehci, &ehci->regs->configured_flag);
|
|
pdata->pm_portsc = ehci_readl(ehci, &ehci->regs->port_status[0]);
|
|
pdata->pm_usbgenctrl = ehci_readl(ehci,
|
|
hcd->regs + FSL_SOC_USB_USBGENCTRL);
|
|
|
|
/* clear the W1C bits */
|
|
pdata->pm_portsc &= cpu_to_hc32(ehci, ~PORT_RWC_BITS);
|
|
|
|
pdata->suspended = 1;
|
|
|
|
/* clear PP to cut power to the port */
|
|
tmp = ehci_readl(ehci, &ehci->regs->port_status[0]);
|
|
tmp &= ~PORT_POWER;
|
|
ehci_writel(ehci, tmp, &ehci->regs->port_status[0]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ehci_fsl_mpc512x_drv_resume(struct device *dev)
|
|
{
|
|
struct usb_hcd *hcd = dev_get_drvdata(dev);
|
|
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
|
struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev);
|
|
u32 tmp;
|
|
|
|
dev_dbg(dev, "suspend=%d already_suspended=%d\n",
|
|
pdata->suspended, pdata->already_suspended);
|
|
|
|
/*
|
|
* If the controller was already suspended at suspend time,
|
|
* then don't resume it now.
|
|
*/
|
|
if (pdata->already_suspended) {
|
|
dev_dbg(dev, "already suspended, leaving early\n");
|
|
pdata->already_suspended = 0;
|
|
return 0;
|
|
}
|
|
|
|
if (!pdata->suspended) {
|
|
dev_dbg(dev, "not suspended, leaving early\n");
|
|
return 0;
|
|
}
|
|
|
|
pdata->suspended = 0;
|
|
|
|
dev_dbg(dev, "resuming...\n");
|
|
|
|
/* set host mode */
|
|
tmp = USBMODE_CM_HOST | (pdata->es ? USBMODE_ES : 0);
|
|
ehci_writel(ehci, tmp, hcd->regs + FSL_SOC_USB_USBMODE);
|
|
|
|
ehci_writel(ehci, pdata->pm_usbgenctrl,
|
|
hcd->regs + FSL_SOC_USB_USBGENCTRL);
|
|
ehci_writel(ehci, ISIPHYCTRL_PXE | ISIPHYCTRL_PHYE,
|
|
hcd->regs + FSL_SOC_USB_ISIPHYCTRL);
|
|
|
|
ehci_writel(ehci, SBUSCFG_INCR8, hcd->regs + FSL_SOC_USB_SBUSCFG);
|
|
|
|
/* restore EHCI registers */
|
|
ehci_writel(ehci, pdata->pm_command, &ehci->regs->command);
|
|
ehci_writel(ehci, pdata->pm_intr_enable, &ehci->regs->intr_enable);
|
|
ehci_writel(ehci, pdata->pm_frame_index, &ehci->regs->frame_index);
|
|
ehci_writel(ehci, pdata->pm_segment, &ehci->regs->segment);
|
|
ehci_writel(ehci, pdata->pm_frame_list, &ehci->regs->frame_list);
|
|
ehci_writel(ehci, pdata->pm_async_next, &ehci->regs->async_next);
|
|
ehci_writel(ehci, pdata->pm_configured_flag,
|
|
&ehci->regs->configured_flag);
|
|
ehci_writel(ehci, pdata->pm_portsc, &ehci->regs->port_status[0]);
|
|
|
|
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
|
|
ehci->rh_state = EHCI_RH_RUNNING;
|
|
dev->power.power_state = PMSG_ON;
|
|
|
|
tmp = ehci_readl(ehci, &ehci->regs->command);
|
|
tmp |= CMD_RUN;
|
|
ehci_writel(ehci, tmp, &ehci->regs->command);
|
|
|
|
usb_hcd_resume_root_hub(hcd);
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static inline int ehci_fsl_mpc512x_drv_suspend(struct device *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int ehci_fsl_mpc512x_drv_resume(struct device *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PPC_MPC512x */
|
|
|
|
static struct ehci_fsl *hcd_to_ehci_fsl(struct usb_hcd *hcd)
|
|
{
|
|
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
|
|
|
return container_of(ehci, struct ehci_fsl, ehci);
|
|
}
|
|
|
|
static int ehci_fsl_drv_suspend(struct device *dev)
|
|
{
|
|
struct usb_hcd *hcd = dev_get_drvdata(dev);
|
|
struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
|
|
void __iomem *non_ehci = hcd->regs;
|
|
|
|
if (of_device_is_compatible(dev->parent->of_node,
|
|
"fsl,mpc5121-usb2-dr")) {
|
|
return ehci_fsl_mpc512x_drv_suspend(dev);
|
|
}
|
|
|
|
ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd),
|
|
device_may_wakeup(dev));
|
|
if (!fsl_deep_sleep())
|
|
return 0;
|
|
|
|
ehci_fsl->usb_ctrl = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
|
|
return 0;
|
|
}
|
|
|
|
static int ehci_fsl_drv_resume(struct device *dev)
|
|
{
|
|
struct usb_hcd *hcd = dev_get_drvdata(dev);
|
|
struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
|
|
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
|
void __iomem *non_ehci = hcd->regs;
|
|
|
|
if (of_device_is_compatible(dev->parent->of_node,
|
|
"fsl,mpc5121-usb2-dr")) {
|
|
return ehci_fsl_mpc512x_drv_resume(dev);
|
|
}
|
|
|
|
ehci_prepare_ports_for_controller_resume(ehci);
|
|
if (!fsl_deep_sleep())
|
|
return 0;
|
|
|
|
usb_root_hub_lost_power(hcd->self.root_hub);
|
|
|
|
/* Restore USB PHY settings and enable the controller. */
|
|
iowrite32be(ehci_fsl->usb_ctrl, non_ehci + FSL_SOC_USB_CTRL);
|
|
|
|
ehci_reset(ehci);
|
|
ehci_fsl_reinit(ehci);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ehci_fsl_drv_restore(struct device *dev)
|
|
{
|
|
struct usb_hcd *hcd = dev_get_drvdata(dev);
|
|
|
|
usb_root_hub_lost_power(hcd->self.root_hub);
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops ehci_fsl_pm_ops = {
|
|
.suspend = ehci_fsl_drv_suspend,
|
|
.resume = ehci_fsl_drv_resume,
|
|
.restore = ehci_fsl_drv_restore,
|
|
};
|
|
|
|
#define EHCI_FSL_PM_OPS (&ehci_fsl_pm_ops)
|
|
#else
|
|
#define EHCI_FSL_PM_OPS NULL
|
|
#endif /* CONFIG_PM */
|
|
|
|
#ifdef CONFIG_USB_OTG
|
|
static int ehci_start_port_reset(struct usb_hcd *hcd, unsigned port)
|
|
{
|
|
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
|
u32 status;
|
|
|
|
if (!port)
|
|
return -EINVAL;
|
|
|
|
port--;
|
|
|
|
/* start port reset before HNP protocol time out */
|
|
status = readl(&ehci->regs->port_status[port]);
|
|
if (!(status & PORT_CONNECT))
|
|
return -ENODEV;
|
|
|
|
/* hub_wq will finish the reset later */
|
|
if (ehci_is_TDI(ehci)) {
|
|
writel(PORT_RESET |
|
|
(status & ~(PORT_CSC | PORT_PEC | PORT_OCC)),
|
|
&ehci->regs->port_status[port]);
|
|
} else {
|
|
writel(PORT_RESET, &ehci->regs->port_status[port]);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
#define ehci_start_port_reset NULL
|
|
#endif /* CONFIG_USB_OTG */
|
|
|
|
static const struct ehci_driver_overrides ehci_fsl_overrides __initconst = {
|
|
.extra_priv_size = sizeof(struct ehci_fsl),
|
|
.reset = ehci_fsl_setup,
|
|
};
|
|
|
|
/**
|
|
* fsl_ehci_drv_remove - shutdown processing for FSL-based HCDs
|
|
* @dev: USB Host Controller being removed
|
|
* Context: !in_interrupt()
|
|
*
|
|
* Reverses the effect of usb_hcd_fsl_probe().
|
|
*
|
|
*/
|
|
|
|
static int fsl_ehci_drv_remove(struct platform_device *pdev)
|
|
{
|
|
struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
|
|
struct usb_hcd *hcd = platform_get_drvdata(pdev);
|
|
|
|
if (!IS_ERR_OR_NULL(hcd->usb_phy)) {
|
|
otg_set_host(hcd->usb_phy->otg, NULL);
|
|
usb_put_phy(hcd->usb_phy);
|
|
}
|
|
|
|
usb_remove_hcd(hcd);
|
|
|
|
/*
|
|
* do platform specific un-initialization:
|
|
* release iomux pins, disable clock, etc.
|
|
*/
|
|
if (pdata->exit)
|
|
pdata->exit(pdev);
|
|
usb_put_hcd(hcd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver ehci_fsl_driver = {
|
|
.probe = fsl_ehci_drv_probe,
|
|
.remove = fsl_ehci_drv_remove,
|
|
.shutdown = usb_hcd_platform_shutdown,
|
|
.driver = {
|
|
.name = "fsl-ehci",
|
|
.pm = EHCI_FSL_PM_OPS,
|
|
},
|
|
};
|
|
|
|
static int __init ehci_fsl_init(void)
|
|
{
|
|
if (usb_disabled())
|
|
return -ENODEV;
|
|
|
|
pr_info(DRV_NAME ": " DRIVER_DESC "\n");
|
|
|
|
ehci_init_driver(&fsl_ehci_hc_driver, &ehci_fsl_overrides);
|
|
|
|
fsl_ehci_hc_driver.product_desc =
|
|
"Freescale On-Chip EHCI Host Controller";
|
|
fsl_ehci_hc_driver.start_port_reset = ehci_start_port_reset;
|
|
|
|
|
|
return platform_driver_register(&ehci_fsl_driver);
|
|
}
|
|
module_init(ehci_fsl_init);
|
|
|
|
static void __exit ehci_fsl_cleanup(void)
|
|
{
|
|
platform_driver_unregister(&ehci_fsl_driver);
|
|
}
|
|
module_exit(ehci_fsl_cleanup);
|
|
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:" DRV_NAME);
|