mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 10:49:33 +00:00
![Colin Ian King](/assets/img/avatar_default.png)
The variable len is assigned but never read, therefore it is redundant and can be removed. Cleans up clang warning: drivers/video/backlight/ili922x.c:276:2: warning: Value stored to 'len' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Jingoo Han <jingoohan1@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
549 lines
14 KiB
C
549 lines
14 KiB
C
/*
|
|
* (C) Copyright 2008
|
|
* Stefano Babic, DENX Software Engineering, sbabic@denx.de.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This driver implements a lcd device for the ILITEK 922x display
|
|
* controller. The interface to the display is SPI and the display's
|
|
* memory is cyclically updated over the RGB interface.
|
|
*/
|
|
|
|
#include <linux/fb.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/lcd.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/string.h>
|
|
|
|
/* Register offset, see manual section 8.2 */
|
|
#define REG_START_OSCILLATION 0x00
|
|
#define REG_DRIVER_CODE_READ 0x00
|
|
#define REG_DRIVER_OUTPUT_CONTROL 0x01
|
|
#define REG_LCD_AC_DRIVEING_CONTROL 0x02
|
|
#define REG_ENTRY_MODE 0x03
|
|
#define REG_COMPARE_1 0x04
|
|
#define REG_COMPARE_2 0x05
|
|
#define REG_DISPLAY_CONTROL_1 0x07
|
|
#define REG_DISPLAY_CONTROL_2 0x08
|
|
#define REG_DISPLAY_CONTROL_3 0x09
|
|
#define REG_FRAME_CYCLE_CONTROL 0x0B
|
|
#define REG_EXT_INTF_CONTROL 0x0C
|
|
#define REG_POWER_CONTROL_1 0x10
|
|
#define REG_POWER_CONTROL_2 0x11
|
|
#define REG_POWER_CONTROL_3 0x12
|
|
#define REG_POWER_CONTROL_4 0x13
|
|
#define REG_RAM_ADDRESS_SET 0x21
|
|
#define REG_WRITE_DATA_TO_GRAM 0x22
|
|
#define REG_RAM_WRITE_MASK1 0x23
|
|
#define REG_RAM_WRITE_MASK2 0x24
|
|
#define REG_GAMMA_CONTROL_1 0x30
|
|
#define REG_GAMMA_CONTROL_2 0x31
|
|
#define REG_GAMMA_CONTROL_3 0x32
|
|
#define REG_GAMMA_CONTROL_4 0x33
|
|
#define REG_GAMMA_CONTROL_5 0x34
|
|
#define REG_GAMMA_CONTROL_6 0x35
|
|
#define REG_GAMMA_CONTROL_7 0x36
|
|
#define REG_GAMMA_CONTROL_8 0x37
|
|
#define REG_GAMMA_CONTROL_9 0x38
|
|
#define REG_GAMMA_CONTROL_10 0x39
|
|
#define REG_GATE_SCAN_CONTROL 0x40
|
|
#define REG_VERT_SCROLL_CONTROL 0x41
|
|
#define REG_FIRST_SCREEN_DRIVE_POS 0x42
|
|
#define REG_SECOND_SCREEN_DRIVE_POS 0x43
|
|
#define REG_RAM_ADDR_POS_H 0x44
|
|
#define REG_RAM_ADDR_POS_V 0x45
|
|
#define REG_OSCILLATOR_CONTROL 0x4F
|
|
#define REG_GPIO 0x60
|
|
#define REG_OTP_VCM_PROGRAMMING 0x61
|
|
#define REG_OTP_VCM_STATUS_ENABLE 0x62
|
|
#define REG_OTP_PROGRAMMING_ID_KEY 0x65
|
|
|
|
/*
|
|
* maximum frequency for register access
|
|
* (not for the GRAM access)
|
|
*/
|
|
#define ILITEK_MAX_FREQ_REG 4000000
|
|
|
|
/*
|
|
* Device ID as found in the datasheet (supports 9221 and 9222)
|
|
*/
|
|
#define ILITEK_DEVICE_ID 0x9220
|
|
#define ILITEK_DEVICE_ID_MASK 0xFFF0
|
|
|
|
/* Last two bits in the START BYTE */
|
|
#define START_RS_INDEX 0
|
|
#define START_RS_REG 1
|
|
#define START_RW_WRITE 0
|
|
#define START_RW_READ 1
|
|
|
|
/**
|
|
* START_BYTE(id, rs, rw)
|
|
*
|
|
* Set the start byte according to the required operation.
|
|
* The start byte is defined as:
|
|
* ----------------------------------
|
|
* | 0 | 1 | 1 | 1 | 0 | ID | RS | RW |
|
|
* ----------------------------------
|
|
* @id: display's id as set by the manufacturer
|
|
* @rs: operation type bit, one of:
|
|
* - START_RS_INDEX set the index register
|
|
* - START_RS_REG write/read registers/GRAM
|
|
* @rw: read/write operation
|
|
* - START_RW_WRITE write
|
|
* - START_RW_READ read
|
|
*/
|
|
#define START_BYTE(id, rs, rw) \
|
|
(0x70 | (((id) & 0x01) << 2) | (((rs) & 0x01) << 1) | ((rw) & 0x01))
|
|
|
|
/**
|
|
* CHECK_FREQ_REG(spi_device s, spi_transfer x) - Check the frequency
|
|
* for the SPI transfer. According to the datasheet, the controller
|
|
* accept higher frequency for the GRAM transfer, but it requires
|
|
* lower frequency when the registers are read/written.
|
|
* The macro sets the frequency in the spi_transfer structure if
|
|
* the frequency exceeds the maximum value.
|
|
*/
|
|
#define CHECK_FREQ_REG(s, x) \
|
|
do { \
|
|
if (s->max_speed_hz > ILITEK_MAX_FREQ_REG) \
|
|
((struct spi_transfer *)x)->speed_hz = \
|
|
ILITEK_MAX_FREQ_REG; \
|
|
} while (0)
|
|
|
|
#define CMD_BUFSIZE 16
|
|
|
|
#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
|
|
|
|
#define set_tx_byte(b) (tx_invert ? ~(b) : b)
|
|
|
|
/**
|
|
* ili922x_id - id as set by manufacturer
|
|
*/
|
|
static int ili922x_id = 1;
|
|
module_param(ili922x_id, int, 0);
|
|
|
|
static int tx_invert;
|
|
module_param(tx_invert, int, 0);
|
|
|
|
/**
|
|
* driver's private structure
|
|
*/
|
|
struct ili922x {
|
|
struct spi_device *spi;
|
|
struct lcd_device *ld;
|
|
int power;
|
|
};
|
|
|
|
/**
|
|
* ili922x_read_status - read status register from display
|
|
* @spi: spi device
|
|
* @rs: output value
|
|
*/
|
|
static int ili922x_read_status(struct spi_device *spi, u16 *rs)
|
|
{
|
|
struct spi_message msg;
|
|
struct spi_transfer xfer;
|
|
unsigned char tbuf[CMD_BUFSIZE];
|
|
unsigned char rbuf[CMD_BUFSIZE];
|
|
int ret, i;
|
|
|
|
memset(&xfer, 0, sizeof(struct spi_transfer));
|
|
spi_message_init(&msg);
|
|
xfer.tx_buf = tbuf;
|
|
xfer.rx_buf = rbuf;
|
|
xfer.cs_change = 1;
|
|
CHECK_FREQ_REG(spi, &xfer);
|
|
|
|
tbuf[0] = set_tx_byte(START_BYTE(ili922x_id, START_RS_INDEX,
|
|
START_RW_READ));
|
|
/*
|
|
* we need 4-byte xfer here due to invalid dummy byte
|
|
* received after start byte
|
|
*/
|
|
for (i = 1; i < 4; i++)
|
|
tbuf[i] = set_tx_byte(0); /* dummy */
|
|
|
|
xfer.bits_per_word = 8;
|
|
xfer.len = 4;
|
|
spi_message_add_tail(&xfer, &msg);
|
|
ret = spi_sync(spi, &msg);
|
|
if (ret < 0) {
|
|
dev_dbg(&spi->dev, "Error sending SPI message 0x%x", ret);
|
|
return ret;
|
|
}
|
|
|
|
*rs = (rbuf[2] << 8) + rbuf[3];
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ili922x_read - read register from display
|
|
* @spi: spi device
|
|
* @reg: offset of the register to be read
|
|
* @rx: output value
|
|
*/
|
|
static int ili922x_read(struct spi_device *spi, u8 reg, u16 *rx)
|
|
{
|
|
struct spi_message msg;
|
|
struct spi_transfer xfer_regindex, xfer_regvalue;
|
|
unsigned char tbuf[CMD_BUFSIZE];
|
|
unsigned char rbuf[CMD_BUFSIZE];
|
|
int ret, len = 0, send_bytes;
|
|
|
|
memset(&xfer_regindex, 0, sizeof(struct spi_transfer));
|
|
memset(&xfer_regvalue, 0, sizeof(struct spi_transfer));
|
|
spi_message_init(&msg);
|
|
xfer_regindex.tx_buf = tbuf;
|
|
xfer_regindex.rx_buf = rbuf;
|
|
xfer_regindex.cs_change = 1;
|
|
CHECK_FREQ_REG(spi, &xfer_regindex);
|
|
|
|
tbuf[0] = set_tx_byte(START_BYTE(ili922x_id, START_RS_INDEX,
|
|
START_RW_WRITE));
|
|
tbuf[1] = set_tx_byte(0);
|
|
tbuf[2] = set_tx_byte(reg);
|
|
xfer_regindex.bits_per_word = 8;
|
|
len = xfer_regindex.len = 3;
|
|
spi_message_add_tail(&xfer_regindex, &msg);
|
|
|
|
send_bytes = len;
|
|
|
|
tbuf[len++] = set_tx_byte(START_BYTE(ili922x_id, START_RS_REG,
|
|
START_RW_READ));
|
|
tbuf[len++] = set_tx_byte(0);
|
|
tbuf[len] = set_tx_byte(0);
|
|
|
|
xfer_regvalue.cs_change = 1;
|
|
xfer_regvalue.len = 3;
|
|
xfer_regvalue.tx_buf = &tbuf[send_bytes];
|
|
xfer_regvalue.rx_buf = &rbuf[send_bytes];
|
|
CHECK_FREQ_REG(spi, &xfer_regvalue);
|
|
|
|
spi_message_add_tail(&xfer_regvalue, &msg);
|
|
ret = spi_sync(spi, &msg);
|
|
if (ret < 0) {
|
|
dev_dbg(&spi->dev, "Error sending SPI message 0x%x", ret);
|
|
return ret;
|
|
}
|
|
|
|
*rx = (rbuf[1 + send_bytes] << 8) + rbuf[2 + send_bytes];
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ili922x_write - write a controller register
|
|
* @spi: struct spi_device *
|
|
* @reg: offset of the register to be written
|
|
* @value: value to be written
|
|
*/
|
|
static int ili922x_write(struct spi_device *spi, u8 reg, u16 value)
|
|
{
|
|
struct spi_message msg;
|
|
struct spi_transfer xfer_regindex, xfer_regvalue;
|
|
unsigned char tbuf[CMD_BUFSIZE];
|
|
unsigned char rbuf[CMD_BUFSIZE];
|
|
int ret;
|
|
|
|
memset(&xfer_regindex, 0, sizeof(struct spi_transfer));
|
|
memset(&xfer_regvalue, 0, sizeof(struct spi_transfer));
|
|
|
|
spi_message_init(&msg);
|
|
xfer_regindex.tx_buf = tbuf;
|
|
xfer_regindex.rx_buf = rbuf;
|
|
xfer_regindex.cs_change = 1;
|
|
CHECK_FREQ_REG(spi, &xfer_regindex);
|
|
|
|
tbuf[0] = set_tx_byte(START_BYTE(ili922x_id, START_RS_INDEX,
|
|
START_RW_WRITE));
|
|
tbuf[1] = set_tx_byte(0);
|
|
tbuf[2] = set_tx_byte(reg);
|
|
xfer_regindex.bits_per_word = 8;
|
|
xfer_regindex.len = 3;
|
|
spi_message_add_tail(&xfer_regindex, &msg);
|
|
|
|
ret = spi_sync(spi, &msg);
|
|
|
|
spi_message_init(&msg);
|
|
tbuf[0] = set_tx_byte(START_BYTE(ili922x_id, START_RS_REG,
|
|
START_RW_WRITE));
|
|
tbuf[1] = set_tx_byte((value & 0xFF00) >> 8);
|
|
tbuf[2] = set_tx_byte(value & 0x00FF);
|
|
|
|
xfer_regvalue.cs_change = 1;
|
|
xfer_regvalue.len = 3;
|
|
xfer_regvalue.tx_buf = tbuf;
|
|
xfer_regvalue.rx_buf = rbuf;
|
|
CHECK_FREQ_REG(spi, &xfer_regvalue);
|
|
|
|
spi_message_add_tail(&xfer_regvalue, &msg);
|
|
|
|
ret = spi_sync(spi, &msg);
|
|
if (ret < 0) {
|
|
dev_err(&spi->dev, "Error sending SPI message 0x%x", ret);
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#ifdef DEBUG
|
|
/**
|
|
* ili922x_reg_dump - dump all registers
|
|
*/
|
|
static void ili922x_reg_dump(struct spi_device *spi)
|
|
{
|
|
u8 reg;
|
|
u16 rx;
|
|
|
|
dev_dbg(&spi->dev, "ILI922x configuration registers:\n");
|
|
for (reg = REG_START_OSCILLATION;
|
|
reg <= REG_OTP_PROGRAMMING_ID_KEY; reg++) {
|
|
ili922x_read(spi, reg, &rx);
|
|
dev_dbg(&spi->dev, "reg @ 0x%02X: 0x%04X\n", reg, rx);
|
|
}
|
|
}
|
|
#else
|
|
static inline void ili922x_reg_dump(struct spi_device *spi) {}
|
|
#endif
|
|
|
|
/**
|
|
* set_write_to_gram_reg - initialize the display to write the GRAM
|
|
* @spi: spi device
|
|
*/
|
|
static void set_write_to_gram_reg(struct spi_device *spi)
|
|
{
|
|
struct spi_message msg;
|
|
struct spi_transfer xfer;
|
|
unsigned char tbuf[CMD_BUFSIZE];
|
|
|
|
memset(&xfer, 0, sizeof(struct spi_transfer));
|
|
|
|
spi_message_init(&msg);
|
|
xfer.tx_buf = tbuf;
|
|
xfer.rx_buf = NULL;
|
|
xfer.cs_change = 1;
|
|
|
|
tbuf[0] = START_BYTE(ili922x_id, START_RS_INDEX, START_RW_WRITE);
|
|
tbuf[1] = 0;
|
|
tbuf[2] = REG_WRITE_DATA_TO_GRAM;
|
|
|
|
xfer.bits_per_word = 8;
|
|
xfer.len = 3;
|
|
spi_message_add_tail(&xfer, &msg);
|
|
spi_sync(spi, &msg);
|
|
}
|
|
|
|
/**
|
|
* ili922x_poweron - turn the display on
|
|
* @spi: spi device
|
|
*
|
|
* The sequence to turn on the display is taken from
|
|
* the datasheet and/or the example code provided by the
|
|
* manufacturer.
|
|
*/
|
|
static int ili922x_poweron(struct spi_device *spi)
|
|
{
|
|
int ret;
|
|
|
|
/* Power on */
|
|
ret = ili922x_write(spi, REG_POWER_CONTROL_1, 0x0000);
|
|
usleep_range(10000, 10500);
|
|
ret += ili922x_write(spi, REG_POWER_CONTROL_2, 0x0000);
|
|
ret += ili922x_write(spi, REG_POWER_CONTROL_3, 0x0000);
|
|
msleep(40);
|
|
ret += ili922x_write(spi, REG_POWER_CONTROL_4, 0x0000);
|
|
msleep(40);
|
|
/* register 0x56 is not documented in the datasheet */
|
|
ret += ili922x_write(spi, 0x56, 0x080F);
|
|
ret += ili922x_write(spi, REG_POWER_CONTROL_1, 0x4240);
|
|
usleep_range(10000, 10500);
|
|
ret += ili922x_write(spi, REG_POWER_CONTROL_2, 0x0000);
|
|
ret += ili922x_write(spi, REG_POWER_CONTROL_3, 0x0014);
|
|
msleep(40);
|
|
ret += ili922x_write(spi, REG_POWER_CONTROL_4, 0x1319);
|
|
msleep(40);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* ili922x_poweroff - turn the display off
|
|
* @spi: spi device
|
|
*/
|
|
static int ili922x_poweroff(struct spi_device *spi)
|
|
{
|
|
int ret;
|
|
|
|
/* Power off */
|
|
ret = ili922x_write(spi, REG_POWER_CONTROL_1, 0x0000);
|
|
usleep_range(10000, 10500);
|
|
ret += ili922x_write(spi, REG_POWER_CONTROL_2, 0x0000);
|
|
ret += ili922x_write(spi, REG_POWER_CONTROL_3, 0x0000);
|
|
msleep(40);
|
|
ret += ili922x_write(spi, REG_POWER_CONTROL_4, 0x0000);
|
|
msleep(40);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* ili922x_display_init - initialize the display by setting
|
|
* the configuration registers
|
|
* @spi: spi device
|
|
*/
|
|
static void ili922x_display_init(struct spi_device *spi)
|
|
{
|
|
ili922x_write(spi, REG_START_OSCILLATION, 1);
|
|
usleep_range(10000, 10500);
|
|
ili922x_write(spi, REG_DRIVER_OUTPUT_CONTROL, 0x691B);
|
|
ili922x_write(spi, REG_LCD_AC_DRIVEING_CONTROL, 0x0700);
|
|
ili922x_write(spi, REG_ENTRY_MODE, 0x1030);
|
|
ili922x_write(spi, REG_COMPARE_1, 0x0000);
|
|
ili922x_write(spi, REG_COMPARE_2, 0x0000);
|
|
ili922x_write(spi, REG_DISPLAY_CONTROL_1, 0x0037);
|
|
ili922x_write(spi, REG_DISPLAY_CONTROL_2, 0x0202);
|
|
ili922x_write(spi, REG_DISPLAY_CONTROL_3, 0x0000);
|
|
ili922x_write(spi, REG_FRAME_CYCLE_CONTROL, 0x0000);
|
|
|
|
/* Set RGB interface */
|
|
ili922x_write(spi, REG_EXT_INTF_CONTROL, 0x0110);
|
|
|
|
ili922x_poweron(spi);
|
|
|
|
ili922x_write(spi, REG_GAMMA_CONTROL_1, 0x0302);
|
|
ili922x_write(spi, REG_GAMMA_CONTROL_2, 0x0407);
|
|
ili922x_write(spi, REG_GAMMA_CONTROL_3, 0x0304);
|
|
ili922x_write(spi, REG_GAMMA_CONTROL_4, 0x0203);
|
|
ili922x_write(spi, REG_GAMMA_CONTROL_5, 0x0706);
|
|
ili922x_write(spi, REG_GAMMA_CONTROL_6, 0x0407);
|
|
ili922x_write(spi, REG_GAMMA_CONTROL_7, 0x0706);
|
|
ili922x_write(spi, REG_GAMMA_CONTROL_8, 0x0000);
|
|
ili922x_write(spi, REG_GAMMA_CONTROL_9, 0x0C06);
|
|
ili922x_write(spi, REG_GAMMA_CONTROL_10, 0x0F00);
|
|
ili922x_write(spi, REG_RAM_ADDRESS_SET, 0x0000);
|
|
ili922x_write(spi, REG_GATE_SCAN_CONTROL, 0x0000);
|
|
ili922x_write(spi, REG_VERT_SCROLL_CONTROL, 0x0000);
|
|
ili922x_write(spi, REG_FIRST_SCREEN_DRIVE_POS, 0xDB00);
|
|
ili922x_write(spi, REG_SECOND_SCREEN_DRIVE_POS, 0xDB00);
|
|
ili922x_write(spi, REG_RAM_ADDR_POS_H, 0xAF00);
|
|
ili922x_write(spi, REG_RAM_ADDR_POS_V, 0xDB00);
|
|
ili922x_reg_dump(spi);
|
|
set_write_to_gram_reg(spi);
|
|
}
|
|
|
|
static int ili922x_lcd_power(struct ili922x *lcd, int power)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
|
|
ret = ili922x_poweron(lcd->spi);
|
|
else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
|
|
ret = ili922x_poweroff(lcd->spi);
|
|
|
|
if (!ret)
|
|
lcd->power = power;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ili922x_set_power(struct lcd_device *ld, int power)
|
|
{
|
|
struct ili922x *ili = lcd_get_data(ld);
|
|
|
|
return ili922x_lcd_power(ili, power);
|
|
}
|
|
|
|
static int ili922x_get_power(struct lcd_device *ld)
|
|
{
|
|
struct ili922x *ili = lcd_get_data(ld);
|
|
|
|
return ili->power;
|
|
}
|
|
|
|
static struct lcd_ops ili922x_ops = {
|
|
.get_power = ili922x_get_power,
|
|
.set_power = ili922x_set_power,
|
|
};
|
|
|
|
static int ili922x_probe(struct spi_device *spi)
|
|
{
|
|
struct ili922x *ili;
|
|
struct lcd_device *lcd;
|
|
int ret;
|
|
u16 reg = 0;
|
|
|
|
ili = devm_kzalloc(&spi->dev, sizeof(*ili), GFP_KERNEL);
|
|
if (!ili)
|
|
return -ENOMEM;
|
|
|
|
ili->spi = spi;
|
|
spi_set_drvdata(spi, ili);
|
|
|
|
/* check if the device is connected */
|
|
ret = ili922x_read(spi, REG_DRIVER_CODE_READ, ®);
|
|
if (ret || ((reg & ILITEK_DEVICE_ID_MASK) != ILITEK_DEVICE_ID)) {
|
|
dev_err(&spi->dev,
|
|
"no LCD found: Chip ID 0x%x, ret %d\n",
|
|
reg, ret);
|
|
return -ENODEV;
|
|
}
|
|
|
|
dev_info(&spi->dev, "ILI%x found, SPI freq %d, mode %d\n",
|
|
reg, spi->max_speed_hz, spi->mode);
|
|
|
|
ret = ili922x_read_status(spi, ®);
|
|
if (ret) {
|
|
dev_err(&spi->dev, "reading RS failed...\n");
|
|
return ret;
|
|
}
|
|
|
|
dev_dbg(&spi->dev, "status: 0x%x\n", reg);
|
|
|
|
ili922x_display_init(spi);
|
|
|
|
ili->power = FB_BLANK_POWERDOWN;
|
|
|
|
lcd = devm_lcd_device_register(&spi->dev, "ili922xlcd", &spi->dev, ili,
|
|
&ili922x_ops);
|
|
if (IS_ERR(lcd)) {
|
|
dev_err(&spi->dev, "cannot register LCD\n");
|
|
return PTR_ERR(lcd);
|
|
}
|
|
|
|
ili->ld = lcd;
|
|
spi_set_drvdata(spi, ili);
|
|
|
|
ili922x_lcd_power(ili, FB_BLANK_UNBLANK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ili922x_remove(struct spi_device *spi)
|
|
{
|
|
ili922x_poweroff(spi);
|
|
return 0;
|
|
}
|
|
|
|
static struct spi_driver ili922x_driver = {
|
|
.driver = {
|
|
.name = "ili922x",
|
|
},
|
|
.probe = ili922x_probe,
|
|
.remove = ili922x_remove,
|
|
};
|
|
|
|
module_spi_driver(ili922x_driver);
|
|
|
|
MODULE_AUTHOR("Stefano Babic <sbabic@denx.de>");
|
|
MODULE_DESCRIPTION("ILI9221/9222 LCD driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_PARM_DESC(ili922x_id, "set controller identifier (default=1)");
|
|
MODULE_PARM_DESC(tx_invert, "invert bytes before sending");
|