linux-stable/fs/seq_file.c
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

1039 lines
23 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* linux/fs/seq_file.c
*
* helper functions for making synthetic files from sequences of records.
* initial implementation -- AV, Oct 2001.
*/
#include <linux/fs.h>
#include <linux/export.h>
#include <linux/seq_file.h>
#include <linux/vmalloc.h>
#include <linux/slab.h>
#include <linux/cred.h>
#include <linux/mm.h>
#include <linux/printk.h>
#include <linux/string_helpers.h>
#include <linux/uaccess.h>
#include <asm/page.h>
static void seq_set_overflow(struct seq_file *m)
{
m->count = m->size;
}
static void *seq_buf_alloc(unsigned long size)
{
return kvmalloc(size, GFP_KERNEL);
}
/**
* seq_open - initialize sequential file
* @file: file we initialize
* @op: method table describing the sequence
*
* seq_open() sets @file, associating it with a sequence described
* by @op. @op->start() sets the iterator up and returns the first
* element of sequence. @op->stop() shuts it down. @op->next()
* returns the next element of sequence. @op->show() prints element
* into the buffer. In case of error ->start() and ->next() return
* ERR_PTR(error). In the end of sequence they return %NULL. ->show()
* returns 0 in case of success and negative number in case of error.
* Returning SEQ_SKIP means "discard this element and move on".
* Note: seq_open() will allocate a struct seq_file and store its
* pointer in @file->private_data. This pointer should not be modified.
*/
int seq_open(struct file *file, const struct seq_operations *op)
{
struct seq_file *p;
WARN_ON(file->private_data);
p = kzalloc(sizeof(*p), GFP_KERNEL);
if (!p)
return -ENOMEM;
file->private_data = p;
mutex_init(&p->lock);
p->op = op;
// No refcounting: the lifetime of 'p' is constrained
// to the lifetime of the file.
p->file = file;
/*
* Wrappers around seq_open(e.g. swaps_open) need to be
* aware of this. If they set f_version themselves, they
* should call seq_open first and then set f_version.
*/
file->f_version = 0;
/*
* seq_files support lseek() and pread(). They do not implement
* write() at all, but we clear FMODE_PWRITE here for historical
* reasons.
*
* If a client of seq_files a) implements file.write() and b) wishes to
* support pwrite() then that client will need to implement its own
* file.open() which calls seq_open() and then sets FMODE_PWRITE.
*/
file->f_mode &= ~FMODE_PWRITE;
return 0;
}
EXPORT_SYMBOL(seq_open);
static int traverse(struct seq_file *m, loff_t offset)
{
loff_t pos = 0, index;
int error = 0;
void *p;
m->version = 0;
index = 0;
m->count = m->from = 0;
if (!offset) {
m->index = index;
return 0;
}
if (!m->buf) {
m->buf = seq_buf_alloc(m->size = PAGE_SIZE);
if (!m->buf)
return -ENOMEM;
}
p = m->op->start(m, &index);
while (p) {
error = PTR_ERR(p);
if (IS_ERR(p))
break;
error = m->op->show(m, p);
if (error < 0)
break;
if (unlikely(error)) {
error = 0;
m->count = 0;
}
if (seq_has_overflowed(m))
goto Eoverflow;
if (pos + m->count > offset) {
m->from = offset - pos;
m->count -= m->from;
m->index = index;
break;
}
pos += m->count;
m->count = 0;
if (pos == offset) {
index++;
m->index = index;
break;
}
p = m->op->next(m, p, &index);
}
m->op->stop(m, p);
m->index = index;
return error;
Eoverflow:
m->op->stop(m, p);
kvfree(m->buf);
m->count = 0;
m->buf = seq_buf_alloc(m->size <<= 1);
return !m->buf ? -ENOMEM : -EAGAIN;
}
/**
* seq_read - ->read() method for sequential files.
* @file: the file to read from
* @buf: the buffer to read to
* @size: the maximum number of bytes to read
* @ppos: the current position in the file
*
* Ready-made ->f_op->read()
*/
ssize_t seq_read(struct file *file, char __user *buf, size_t size, loff_t *ppos)
{
struct seq_file *m = file->private_data;
size_t copied = 0;
loff_t pos;
size_t n;
void *p;
int err = 0;
mutex_lock(&m->lock);
/*
* seq_file->op->..m_start/m_stop/m_next may do special actions
* or optimisations based on the file->f_version, so we want to
* pass the file->f_version to those methods.
*
* seq_file->version is just copy of f_version, and seq_file
* methods can treat it simply as file version.
* It is copied in first and copied out after all operations.
* It is convenient to have it as part of structure to avoid the
* need of passing another argument to all the seq_file methods.
*/
m->version = file->f_version;
/*
* if request is to read from zero offset, reset iterator to first
* record as it might have been already advanced by previous requests
*/
if (*ppos == 0)
m->index = 0;
/* Don't assume *ppos is where we left it */
if (unlikely(*ppos != m->read_pos)) {
while ((err = traverse(m, *ppos)) == -EAGAIN)
;
if (err) {
/* With prejudice... */
m->read_pos = 0;
m->version = 0;
m->index = 0;
m->count = 0;
goto Done;
} else {
m->read_pos = *ppos;
}
}
/* grab buffer if we didn't have one */
if (!m->buf) {
m->buf = seq_buf_alloc(m->size = PAGE_SIZE);
if (!m->buf)
goto Enomem;
}
/* if not empty - flush it first */
if (m->count) {
n = min(m->count, size);
err = copy_to_user(buf, m->buf + m->from, n);
if (err)
goto Efault;
m->count -= n;
m->from += n;
size -= n;
buf += n;
copied += n;
if (!m->count) {
m->from = 0;
m->index++;
}
if (!size)
goto Done;
}
/* we need at least one record in buffer */
pos = m->index;
p = m->op->start(m, &pos);
while (1) {
err = PTR_ERR(p);
if (!p || IS_ERR(p))
break;
err = m->op->show(m, p);
if (err < 0)
break;
if (unlikely(err))
m->count = 0;
if (unlikely(!m->count)) {
p = m->op->next(m, p, &pos);
m->index = pos;
continue;
}
if (m->count < m->size)
goto Fill;
m->op->stop(m, p);
kvfree(m->buf);
m->count = 0;
m->buf = seq_buf_alloc(m->size <<= 1);
if (!m->buf)
goto Enomem;
m->version = 0;
pos = m->index;
p = m->op->start(m, &pos);
}
m->op->stop(m, p);
m->count = 0;
goto Done;
Fill:
/* they want more? let's try to get some more */
while (m->count < size) {
size_t offs = m->count;
loff_t next = pos;
p = m->op->next(m, p, &next);
if (!p || IS_ERR(p)) {
err = PTR_ERR(p);
break;
}
err = m->op->show(m, p);
if (seq_has_overflowed(m) || err) {
m->count = offs;
if (likely(err <= 0))
break;
}
pos = next;
}
m->op->stop(m, p);
n = min(m->count, size);
err = copy_to_user(buf, m->buf, n);
if (err)
goto Efault;
copied += n;
m->count -= n;
if (m->count)
m->from = n;
else
pos++;
m->index = pos;
Done:
if (!copied)
copied = err;
else {
*ppos += copied;
m->read_pos += copied;
}
file->f_version = m->version;
mutex_unlock(&m->lock);
return copied;
Enomem:
err = -ENOMEM;
goto Done;
Efault:
err = -EFAULT;
goto Done;
}
EXPORT_SYMBOL(seq_read);
/**
* seq_lseek - ->llseek() method for sequential files.
* @file: the file in question
* @offset: new position
* @whence: 0 for absolute, 1 for relative position
*
* Ready-made ->f_op->llseek()
*/
loff_t seq_lseek(struct file *file, loff_t offset, int whence)
{
struct seq_file *m = file->private_data;
loff_t retval = -EINVAL;
mutex_lock(&m->lock);
m->version = file->f_version;
switch (whence) {
case SEEK_CUR:
offset += file->f_pos;
case SEEK_SET:
if (offset < 0)
break;
retval = offset;
if (offset != m->read_pos) {
while ((retval = traverse(m, offset)) == -EAGAIN)
;
if (retval) {
/* with extreme prejudice... */
file->f_pos = 0;
m->read_pos = 0;
m->version = 0;
m->index = 0;
m->count = 0;
} else {
m->read_pos = offset;
retval = file->f_pos = offset;
}
} else {
file->f_pos = offset;
}
}
file->f_version = m->version;
mutex_unlock(&m->lock);
return retval;
}
EXPORT_SYMBOL(seq_lseek);
/**
* seq_release - free the structures associated with sequential file.
* @file: file in question
* @inode: its inode
*
* Frees the structures associated with sequential file; can be used
* as ->f_op->release() if you don't have private data to destroy.
*/
int seq_release(struct inode *inode, struct file *file)
{
struct seq_file *m = file->private_data;
kvfree(m->buf);
kfree(m);
return 0;
}
EXPORT_SYMBOL(seq_release);
/**
* seq_escape - print string into buffer, escaping some characters
* @m: target buffer
* @s: string
* @esc: set of characters that need escaping
*
* Puts string into buffer, replacing each occurrence of character from
* @esc with usual octal escape.
* Use seq_has_overflowed() to check for errors.
*/
void seq_escape(struct seq_file *m, const char *s, const char *esc)
{
char *buf;
size_t size = seq_get_buf(m, &buf);
int ret;
ret = string_escape_str(s, buf, size, ESCAPE_OCTAL, esc);
seq_commit(m, ret < size ? ret : -1);
}
EXPORT_SYMBOL(seq_escape);
void seq_vprintf(struct seq_file *m, const char *f, va_list args)
{
int len;
if (m->count < m->size) {
len = vsnprintf(m->buf + m->count, m->size - m->count, f, args);
if (m->count + len < m->size) {
m->count += len;
return;
}
}
seq_set_overflow(m);
}
EXPORT_SYMBOL(seq_vprintf);
void seq_printf(struct seq_file *m, const char *f, ...)
{
va_list args;
va_start(args, f);
seq_vprintf(m, f, args);
va_end(args);
}
EXPORT_SYMBOL(seq_printf);
/**
* mangle_path - mangle and copy path to buffer beginning
* @s: buffer start
* @p: beginning of path in above buffer
* @esc: set of characters that need escaping
*
* Copy the path from @p to @s, replacing each occurrence of character from
* @esc with usual octal escape.
* Returns pointer past last written character in @s, or NULL in case of
* failure.
*/
char *mangle_path(char *s, const char *p, const char *esc)
{
while (s <= p) {
char c = *p++;
if (!c) {
return s;
} else if (!strchr(esc, c)) {
*s++ = c;
} else if (s + 4 > p) {
break;
} else {
*s++ = '\\';
*s++ = '0' + ((c & 0300) >> 6);
*s++ = '0' + ((c & 070) >> 3);
*s++ = '0' + (c & 07);
}
}
return NULL;
}
EXPORT_SYMBOL(mangle_path);
/**
* seq_path - seq_file interface to print a pathname
* @m: the seq_file handle
* @path: the struct path to print
* @esc: set of characters to escape in the output
*
* return the absolute path of 'path', as represented by the
* dentry / mnt pair in the path parameter.
*/
int seq_path(struct seq_file *m, const struct path *path, const char *esc)
{
char *buf;
size_t size = seq_get_buf(m, &buf);
int res = -1;
if (size) {
char *p = d_path(path, buf, size);
if (!IS_ERR(p)) {
char *end = mangle_path(buf, p, esc);
if (end)
res = end - buf;
}
}
seq_commit(m, res);
return res;
}
EXPORT_SYMBOL(seq_path);
/**
* seq_file_path - seq_file interface to print a pathname of a file
* @m: the seq_file handle
* @file: the struct file to print
* @esc: set of characters to escape in the output
*
* return the absolute path to the file.
*/
int seq_file_path(struct seq_file *m, struct file *file, const char *esc)
{
return seq_path(m, &file->f_path, esc);
}
EXPORT_SYMBOL(seq_file_path);
/*
* Same as seq_path, but relative to supplied root.
*/
int seq_path_root(struct seq_file *m, const struct path *path,
const struct path *root, const char *esc)
{
char *buf;
size_t size = seq_get_buf(m, &buf);
int res = -ENAMETOOLONG;
if (size) {
char *p;
p = __d_path(path, root, buf, size);
if (!p)
return SEQ_SKIP;
res = PTR_ERR(p);
if (!IS_ERR(p)) {
char *end = mangle_path(buf, p, esc);
if (end)
res = end - buf;
else
res = -ENAMETOOLONG;
}
}
seq_commit(m, res);
return res < 0 && res != -ENAMETOOLONG ? res : 0;
}
/*
* returns the path of the 'dentry' from the root of its filesystem.
*/
int seq_dentry(struct seq_file *m, struct dentry *dentry, const char *esc)
{
char *buf;
size_t size = seq_get_buf(m, &buf);
int res = -1;
if (size) {
char *p = dentry_path(dentry, buf, size);
if (!IS_ERR(p)) {
char *end = mangle_path(buf, p, esc);
if (end)
res = end - buf;
}
}
seq_commit(m, res);
return res;
}
EXPORT_SYMBOL(seq_dentry);
static void *single_start(struct seq_file *p, loff_t *pos)
{
return NULL + (*pos == 0);
}
static void *single_next(struct seq_file *p, void *v, loff_t *pos)
{
++*pos;
return NULL;
}
static void single_stop(struct seq_file *p, void *v)
{
}
int single_open(struct file *file, int (*show)(struct seq_file *, void *),
void *data)
{
struct seq_operations *op = kmalloc(sizeof(*op), GFP_KERNEL);
int res = -ENOMEM;
if (op) {
op->start = single_start;
op->next = single_next;
op->stop = single_stop;
op->show = show;
res = seq_open(file, op);
if (!res)
((struct seq_file *)file->private_data)->private = data;
else
kfree(op);
}
return res;
}
EXPORT_SYMBOL(single_open);
int single_open_size(struct file *file, int (*show)(struct seq_file *, void *),
void *data, size_t size)
{
char *buf = seq_buf_alloc(size);
int ret;
if (!buf)
return -ENOMEM;
ret = single_open(file, show, data);
if (ret) {
kvfree(buf);
return ret;
}
((struct seq_file *)file->private_data)->buf = buf;
((struct seq_file *)file->private_data)->size = size;
return 0;
}
EXPORT_SYMBOL(single_open_size);
int single_release(struct inode *inode, struct file *file)
{
const struct seq_operations *op = ((struct seq_file *)file->private_data)->op;
int res = seq_release(inode, file);
kfree(op);
return res;
}
EXPORT_SYMBOL(single_release);
int seq_release_private(struct inode *inode, struct file *file)
{
struct seq_file *seq = file->private_data;
kfree(seq->private);
seq->private = NULL;
return seq_release(inode, file);
}
EXPORT_SYMBOL(seq_release_private);
void *__seq_open_private(struct file *f, const struct seq_operations *ops,
int psize)
{
int rc;
void *private;
struct seq_file *seq;
private = kzalloc(psize, GFP_KERNEL);
if (private == NULL)
goto out;
rc = seq_open(f, ops);
if (rc < 0)
goto out_free;
seq = f->private_data;
seq->private = private;
return private;
out_free:
kfree(private);
out:
return NULL;
}
EXPORT_SYMBOL(__seq_open_private);
int seq_open_private(struct file *filp, const struct seq_operations *ops,
int psize)
{
return __seq_open_private(filp, ops, psize) ? 0 : -ENOMEM;
}
EXPORT_SYMBOL(seq_open_private);
void seq_putc(struct seq_file *m, char c)
{
if (m->count >= m->size)
return;
m->buf[m->count++] = c;
}
EXPORT_SYMBOL(seq_putc);
void seq_puts(struct seq_file *m, const char *s)
{
int len = strlen(s);
if (m->count + len >= m->size) {
seq_set_overflow(m);
return;
}
memcpy(m->buf + m->count, s, len);
m->count += len;
}
EXPORT_SYMBOL(seq_puts);
/*
* A helper routine for putting decimal numbers without rich format of printf().
* only 'unsigned long long' is supported.
* This routine will put strlen(delimiter) + number into seq_file.
* This routine is very quick when you show lots of numbers.
* In usual cases, it will be better to use seq_printf(). It's easier to read.
*/
void seq_put_decimal_ull(struct seq_file *m, const char *delimiter,
unsigned long long num)
{
int len;
if (m->count + 2 >= m->size) /* we'll write 2 bytes at least */
goto overflow;
len = strlen(delimiter);
if (m->count + len >= m->size)
goto overflow;
memcpy(m->buf + m->count, delimiter, len);
m->count += len;
if (m->count + 1 >= m->size)
goto overflow;
if (num < 10) {
m->buf[m->count++] = num + '0';
return;
}
len = num_to_str(m->buf + m->count, m->size - m->count, num);
if (!len)
goto overflow;
m->count += len;
return;
overflow:
seq_set_overflow(m);
}
EXPORT_SYMBOL(seq_put_decimal_ull);
void seq_put_decimal_ll(struct seq_file *m, const char *delimiter, long long num)
{
int len;
if (m->count + 3 >= m->size) /* we'll write 2 bytes at least */
goto overflow;
len = strlen(delimiter);
if (m->count + len >= m->size)
goto overflow;
memcpy(m->buf + m->count, delimiter, len);
m->count += len;
if (m->count + 2 >= m->size)
goto overflow;
if (num < 0) {
m->buf[m->count++] = '-';
num = -num;
}
if (num < 10) {
m->buf[m->count++] = num + '0';
return;
}
len = num_to_str(m->buf + m->count, m->size - m->count, num);
if (!len)
goto overflow;
m->count += len;
return;
overflow:
seq_set_overflow(m);
}
EXPORT_SYMBOL(seq_put_decimal_ll);
/**
* seq_write - write arbitrary data to buffer
* @seq: seq_file identifying the buffer to which data should be written
* @data: data address
* @len: number of bytes
*
* Return 0 on success, non-zero otherwise.
*/
int seq_write(struct seq_file *seq, const void *data, size_t len)
{
if (seq->count + len < seq->size) {
memcpy(seq->buf + seq->count, data, len);
seq->count += len;
return 0;
}
seq_set_overflow(seq);
return -1;
}
EXPORT_SYMBOL(seq_write);
/**
* seq_pad - write padding spaces to buffer
* @m: seq_file identifying the buffer to which data should be written
* @c: the byte to append after padding if non-zero
*/
void seq_pad(struct seq_file *m, char c)
{
int size = m->pad_until - m->count;
if (size > 0)
seq_printf(m, "%*s", size, "");
if (c)
seq_putc(m, c);
}
EXPORT_SYMBOL(seq_pad);
/* A complete analogue of print_hex_dump() */
void seq_hex_dump(struct seq_file *m, const char *prefix_str, int prefix_type,
int rowsize, int groupsize, const void *buf, size_t len,
bool ascii)
{
const u8 *ptr = buf;
int i, linelen, remaining = len;
char *buffer;
size_t size;
int ret;
if (rowsize != 16 && rowsize != 32)
rowsize = 16;
for (i = 0; i < len && !seq_has_overflowed(m); i += rowsize) {
linelen = min(remaining, rowsize);
remaining -= rowsize;
switch (prefix_type) {
case DUMP_PREFIX_ADDRESS:
seq_printf(m, "%s%p: ", prefix_str, ptr + i);
break;
case DUMP_PREFIX_OFFSET:
seq_printf(m, "%s%.8x: ", prefix_str, i);
break;
default:
seq_printf(m, "%s", prefix_str);
break;
}
size = seq_get_buf(m, &buffer);
ret = hex_dump_to_buffer(ptr + i, linelen, rowsize, groupsize,
buffer, size, ascii);
seq_commit(m, ret < size ? ret : -1);
seq_putc(m, '\n');
}
}
EXPORT_SYMBOL(seq_hex_dump);
struct list_head *seq_list_start(struct list_head *head, loff_t pos)
{
struct list_head *lh;
list_for_each(lh, head)
if (pos-- == 0)
return lh;
return NULL;
}
EXPORT_SYMBOL(seq_list_start);
struct list_head *seq_list_start_head(struct list_head *head, loff_t pos)
{
if (!pos)
return head;
return seq_list_start(head, pos - 1);
}
EXPORT_SYMBOL(seq_list_start_head);
struct list_head *seq_list_next(void *v, struct list_head *head, loff_t *ppos)
{
struct list_head *lh;
lh = ((struct list_head *)v)->next;
++*ppos;
return lh == head ? NULL : lh;
}
EXPORT_SYMBOL(seq_list_next);
/**
* seq_hlist_start - start an iteration of a hlist
* @head: the head of the hlist
* @pos: the start position of the sequence
*
* Called at seq_file->op->start().
*/
struct hlist_node *seq_hlist_start(struct hlist_head *head, loff_t pos)
{
struct hlist_node *node;
hlist_for_each(node, head)
if (pos-- == 0)
return node;
return NULL;
}
EXPORT_SYMBOL(seq_hlist_start);
/**
* seq_hlist_start_head - start an iteration of a hlist
* @head: the head of the hlist
* @pos: the start position of the sequence
*
* Called at seq_file->op->start(). Call this function if you want to
* print a header at the top of the output.
*/
struct hlist_node *seq_hlist_start_head(struct hlist_head *head, loff_t pos)
{
if (!pos)
return SEQ_START_TOKEN;
return seq_hlist_start(head, pos - 1);
}
EXPORT_SYMBOL(seq_hlist_start_head);
/**
* seq_hlist_next - move to the next position of the hlist
* @v: the current iterator
* @head: the head of the hlist
* @ppos: the current position
*
* Called at seq_file->op->next().
*/
struct hlist_node *seq_hlist_next(void *v, struct hlist_head *head,
loff_t *ppos)
{
struct hlist_node *node = v;
++*ppos;
if (v == SEQ_START_TOKEN)
return head->first;
else
return node->next;
}
EXPORT_SYMBOL(seq_hlist_next);
/**
* seq_hlist_start_rcu - start an iteration of a hlist protected by RCU
* @head: the head of the hlist
* @pos: the start position of the sequence
*
* Called at seq_file->op->start().
*
* This list-traversal primitive may safely run concurrently with
* the _rcu list-mutation primitives such as hlist_add_head_rcu()
* as long as the traversal is guarded by rcu_read_lock().
*/
struct hlist_node *seq_hlist_start_rcu(struct hlist_head *head,
loff_t pos)
{
struct hlist_node *node;
__hlist_for_each_rcu(node, head)
if (pos-- == 0)
return node;
return NULL;
}
EXPORT_SYMBOL(seq_hlist_start_rcu);
/**
* seq_hlist_start_head_rcu - start an iteration of a hlist protected by RCU
* @head: the head of the hlist
* @pos: the start position of the sequence
*
* Called at seq_file->op->start(). Call this function if you want to
* print a header at the top of the output.
*
* This list-traversal primitive may safely run concurrently with
* the _rcu list-mutation primitives such as hlist_add_head_rcu()
* as long as the traversal is guarded by rcu_read_lock().
*/
struct hlist_node *seq_hlist_start_head_rcu(struct hlist_head *head,
loff_t pos)
{
if (!pos)
return SEQ_START_TOKEN;
return seq_hlist_start_rcu(head, pos - 1);
}
EXPORT_SYMBOL(seq_hlist_start_head_rcu);
/**
* seq_hlist_next_rcu - move to the next position of the hlist protected by RCU
* @v: the current iterator
* @head: the head of the hlist
* @ppos: the current position
*
* Called at seq_file->op->next().
*
* This list-traversal primitive may safely run concurrently with
* the _rcu list-mutation primitives such as hlist_add_head_rcu()
* as long as the traversal is guarded by rcu_read_lock().
*/
struct hlist_node *seq_hlist_next_rcu(void *v,
struct hlist_head *head,
loff_t *ppos)
{
struct hlist_node *node = v;
++*ppos;
if (v == SEQ_START_TOKEN)
return rcu_dereference(head->first);
else
return rcu_dereference(node->next);
}
EXPORT_SYMBOL(seq_hlist_next_rcu);
/**
* seq_hlist_start_precpu - start an iteration of a percpu hlist array
* @head: pointer to percpu array of struct hlist_heads
* @cpu: pointer to cpu "cursor"
* @pos: start position of sequence
*
* Called at seq_file->op->start().
*/
struct hlist_node *
seq_hlist_start_percpu(struct hlist_head __percpu *head, int *cpu, loff_t pos)
{
struct hlist_node *node;
for_each_possible_cpu(*cpu) {
hlist_for_each(node, per_cpu_ptr(head, *cpu)) {
if (pos-- == 0)
return node;
}
}
return NULL;
}
EXPORT_SYMBOL(seq_hlist_start_percpu);
/**
* seq_hlist_next_percpu - move to the next position of the percpu hlist array
* @v: pointer to current hlist_node
* @head: pointer to percpu array of struct hlist_heads
* @cpu: pointer to cpu "cursor"
* @pos: start position of sequence
*
* Called at seq_file->op->next().
*/
struct hlist_node *
seq_hlist_next_percpu(void *v, struct hlist_head __percpu *head,
int *cpu, loff_t *pos)
{
struct hlist_node *node = v;
++*pos;
if (node->next)
return node->next;
for (*cpu = cpumask_next(*cpu, cpu_possible_mask); *cpu < nr_cpu_ids;
*cpu = cpumask_next(*cpu, cpu_possible_mask)) {
struct hlist_head *bucket = per_cpu_ptr(head, *cpu);
if (!hlist_empty(bucket))
return bucket->first;
}
return NULL;
}
EXPORT_SYMBOL(seq_hlist_next_percpu);