125 lines
2.8 KiB
YAML
125 lines
2.8 KiB
YAML
# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/net/qcom,ethqos.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Qualcomm Ethernet ETHQOS device
|
|
|
|
maintainers:
|
|
- Bhupesh Sharma <bhupesh.sharma@linaro.org>
|
|
|
|
description:
|
|
dwmmac based Qualcomm ethernet devices which support Gigabit
|
|
ethernet (version v2.3.0 and onwards).
|
|
|
|
allOf:
|
|
- $ref: snps,dwmac.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- qcom,qcs404-ethqos
|
|
- qcom,sa8775p-ethqos
|
|
- qcom,sc8280xp-ethqos
|
|
- qcom,sm8150-ethqos
|
|
|
|
reg:
|
|
maxItems: 2
|
|
|
|
reg-names:
|
|
items:
|
|
- const: stmmaceth
|
|
- const: rgmii
|
|
|
|
interrupts:
|
|
minItems: 1
|
|
items:
|
|
- description: Combined signal for various interrupt events
|
|
- description: The interrupt that occurs when Rx exits the LPI state
|
|
- description: The interrupt that occurs when HW safety error triggered
|
|
|
|
interrupt-names:
|
|
minItems: 1
|
|
items:
|
|
- const: macirq
|
|
- enum: [eth_lpi, sfty]
|
|
- const: sfty
|
|
|
|
clocks:
|
|
maxItems: 4
|
|
|
|
clock-names:
|
|
items:
|
|
- const: stmmaceth
|
|
- const: pclk
|
|
- const: ptp_ref
|
|
- enum:
|
|
- rgmii
|
|
- phyaux
|
|
|
|
iommus:
|
|
maxItems: 1
|
|
|
|
phys: true
|
|
|
|
phy-names:
|
|
const: serdes
|
|
|
|
required:
|
|
- compatible
|
|
- clocks
|
|
- clock-names
|
|
- reg-names
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/clock/qcom,gcc-qcs404.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
ethernet: ethernet@7a80000 {
|
|
compatible = "qcom,qcs404-ethqos";
|
|
reg = <0x07a80000 0x10000>,
|
|
<0x07a96000 0x100>;
|
|
reg-names = "stmmaceth", "rgmii";
|
|
clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
|
|
clocks = <&gcc GCC_ETH_AXI_CLK>,
|
|
<&gcc GCC_ETH_SLAVE_AHB_CLK>,
|
|
<&gcc GCC_ETH_PTP_CLK>,
|
|
<&gcc GCC_ETH_RGMII_CLK>;
|
|
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "macirq", "eth_lpi", "sfty";
|
|
|
|
rx-fifo-depth = <4096>;
|
|
tx-fifo-depth = <4096>;
|
|
|
|
snps,tso;
|
|
snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
|
|
snps,reset-active-low;
|
|
snps,reset-delays-us = <0 10000 10000>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <ðernet_defaults>;
|
|
|
|
phy-handle = <&phy1>;
|
|
phy-mode = "rgmii";
|
|
mdio {
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x0>;
|
|
|
|
compatible = "snps,dwmac-mdio";
|
|
phy1: phy@4 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
device_type = "ethernet-phy";
|
|
reg = <0x4>;
|
|
|
|
#phy-cells = <0>;
|
|
};
|
|
};
|
|
};
|