mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-11-01 17:08:10 +00:00
babd658503
Fix the tab converting to space problem. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
835 lines
24 KiB
C
835 lines
24 KiB
C
/*
|
|
* NAU85L40 ALSA SoC audio driver
|
|
*
|
|
* Copyright 2016 Nuvoton Technology Corp.
|
|
* Author: John Hsu <KCHSU0@nuvoton.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/of_device.h>
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/soc-dapm.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/tlv.h>
|
|
#include "nau8540.h"
|
|
|
|
|
|
#define NAU_FREF_MAX 13500000
|
|
#define NAU_FVCO_MAX 100000000
|
|
#define NAU_FVCO_MIN 90000000
|
|
|
|
/* the maximum frequency of CLK_ADC */
|
|
#define CLK_ADC_MAX 6144000
|
|
|
|
/* scaling for mclk from sysclk_src output */
|
|
static const struct nau8540_fll_attr mclk_src_scaling[] = {
|
|
{ 1, 0x0 },
|
|
{ 2, 0x2 },
|
|
{ 4, 0x3 },
|
|
{ 8, 0x4 },
|
|
{ 16, 0x5 },
|
|
{ 32, 0x6 },
|
|
{ 3, 0x7 },
|
|
{ 6, 0xa },
|
|
{ 12, 0xb },
|
|
{ 24, 0xc },
|
|
};
|
|
|
|
/* ratio for input clk freq */
|
|
static const struct nau8540_fll_attr fll_ratio[] = {
|
|
{ 512000, 0x01 },
|
|
{ 256000, 0x02 },
|
|
{ 128000, 0x04 },
|
|
{ 64000, 0x08 },
|
|
{ 32000, 0x10 },
|
|
{ 8000, 0x20 },
|
|
{ 4000, 0x40 },
|
|
};
|
|
|
|
static const struct nau8540_fll_attr fll_pre_scalar[] = {
|
|
{ 1, 0x0 },
|
|
{ 2, 0x1 },
|
|
{ 4, 0x2 },
|
|
{ 8, 0x3 },
|
|
};
|
|
|
|
/* over sampling rate */
|
|
static const struct nau8540_osr_attr osr_adc_sel[] = {
|
|
{ 32, 3 }, /* OSR 32, SRC 1/8 */
|
|
{ 64, 2 }, /* OSR 64, SRC 1/4 */
|
|
{ 128, 1 }, /* OSR 128, SRC 1/2 */
|
|
{ 256, 0 }, /* OSR 256, SRC 1 */
|
|
};
|
|
|
|
static const struct reg_default nau8540_reg_defaults[] = {
|
|
{NAU8540_REG_POWER_MANAGEMENT, 0x0000},
|
|
{NAU8540_REG_CLOCK_CTRL, 0x0000},
|
|
{NAU8540_REG_CLOCK_SRC, 0x0000},
|
|
{NAU8540_REG_FLL1, 0x0001},
|
|
{NAU8540_REG_FLL2, 0x3126},
|
|
{NAU8540_REG_FLL3, 0x0008},
|
|
{NAU8540_REG_FLL4, 0x0010},
|
|
{NAU8540_REG_FLL5, 0xC000},
|
|
{NAU8540_REG_FLL6, 0x6000},
|
|
{NAU8540_REG_FLL_VCO_RSV, 0xF13C},
|
|
{NAU8540_REG_PCM_CTRL0, 0x000B},
|
|
{NAU8540_REG_PCM_CTRL1, 0x3010},
|
|
{NAU8540_REG_PCM_CTRL2, 0x0800},
|
|
{NAU8540_REG_PCM_CTRL3, 0x0000},
|
|
{NAU8540_REG_PCM_CTRL4, 0x000F},
|
|
{NAU8540_REG_ALC_CONTROL_1, 0x0000},
|
|
{NAU8540_REG_ALC_CONTROL_2, 0x700B},
|
|
{NAU8540_REG_ALC_CONTROL_3, 0x0022},
|
|
{NAU8540_REG_ALC_CONTROL_4, 0x1010},
|
|
{NAU8540_REG_ALC_CONTROL_5, 0x1010},
|
|
{NAU8540_REG_NOTCH_FIL1_CH1, 0x0000},
|
|
{NAU8540_REG_NOTCH_FIL2_CH1, 0x0000},
|
|
{NAU8540_REG_NOTCH_FIL1_CH2, 0x0000},
|
|
{NAU8540_REG_NOTCH_FIL2_CH2, 0x0000},
|
|
{NAU8540_REG_NOTCH_FIL1_CH3, 0x0000},
|
|
{NAU8540_REG_NOTCH_FIL2_CH3, 0x0000},
|
|
{NAU8540_REG_NOTCH_FIL1_CH4, 0x0000},
|
|
{NAU8540_REG_NOTCH_FIL2_CH4, 0x0000},
|
|
{NAU8540_REG_HPF_FILTER_CH12, 0x0000},
|
|
{NAU8540_REG_HPF_FILTER_CH34, 0x0000},
|
|
{NAU8540_REG_ADC_SAMPLE_RATE, 0x0002},
|
|
{NAU8540_REG_DIGITAL_GAIN_CH1, 0x0400},
|
|
{NAU8540_REG_DIGITAL_GAIN_CH2, 0x0400},
|
|
{NAU8540_REG_DIGITAL_GAIN_CH3, 0x0400},
|
|
{NAU8540_REG_DIGITAL_GAIN_CH4, 0x0400},
|
|
{NAU8540_REG_DIGITAL_MUX, 0x00E4},
|
|
{NAU8540_REG_GPIO_CTRL, 0x0000},
|
|
{NAU8540_REG_MISC_CTRL, 0x0000},
|
|
{NAU8540_REG_I2C_CTRL, 0xEFFF},
|
|
{NAU8540_REG_VMID_CTRL, 0x0000},
|
|
{NAU8540_REG_MUTE, 0x0000},
|
|
{NAU8540_REG_ANALOG_ADC1, 0x0011},
|
|
{NAU8540_REG_ANALOG_ADC2, 0x0020},
|
|
{NAU8540_REG_ANALOG_PWR, 0x0000},
|
|
{NAU8540_REG_MIC_BIAS, 0x0004},
|
|
{NAU8540_REG_REFERENCE, 0x0000},
|
|
{NAU8540_REG_FEPGA1, 0x0000},
|
|
{NAU8540_REG_FEPGA2, 0x0000},
|
|
{NAU8540_REG_FEPGA3, 0x0101},
|
|
{NAU8540_REG_FEPGA4, 0x0101},
|
|
{NAU8540_REG_PWR, 0x0000},
|
|
};
|
|
|
|
static bool nau8540_readable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case NAU8540_REG_POWER_MANAGEMENT ... NAU8540_REG_FLL_VCO_RSV:
|
|
case NAU8540_REG_PCM_CTRL0 ... NAU8540_REG_PCM_CTRL4:
|
|
case NAU8540_REG_ALC_CONTROL_1 ... NAU8540_REG_ALC_CONTROL_5:
|
|
case NAU8540_REG_ALC_GAIN_CH12 ... NAU8540_REG_ADC_SAMPLE_RATE:
|
|
case NAU8540_REG_DIGITAL_GAIN_CH1 ... NAU8540_REG_DIGITAL_MUX:
|
|
case NAU8540_REG_P2P_CH1 ... NAU8540_REG_I2C_CTRL:
|
|
case NAU8540_REG_I2C_DEVICE_ID:
|
|
case NAU8540_REG_VMID_CTRL ... NAU8540_REG_MUTE:
|
|
case NAU8540_REG_ANALOG_ADC1 ... NAU8540_REG_PWR:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
|
|
}
|
|
|
|
static bool nau8540_writeable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case NAU8540_REG_SW_RESET ... NAU8540_REG_FLL_VCO_RSV:
|
|
case NAU8540_REG_PCM_CTRL0 ... NAU8540_REG_PCM_CTRL4:
|
|
case NAU8540_REG_ALC_CONTROL_1 ... NAU8540_REG_ALC_CONTROL_5:
|
|
case NAU8540_REG_NOTCH_FIL1_CH1 ... NAU8540_REG_ADC_SAMPLE_RATE:
|
|
case NAU8540_REG_DIGITAL_GAIN_CH1 ... NAU8540_REG_DIGITAL_MUX:
|
|
case NAU8540_REG_GPIO_CTRL ... NAU8540_REG_I2C_CTRL:
|
|
case NAU8540_REG_RST:
|
|
case NAU8540_REG_VMID_CTRL ... NAU8540_REG_MUTE:
|
|
case NAU8540_REG_ANALOG_ADC1 ... NAU8540_REG_PWR:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool nau8540_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case NAU8540_REG_SW_RESET:
|
|
case NAU8540_REG_ALC_GAIN_CH12 ... NAU8540_REG_ALC_STATUS:
|
|
case NAU8540_REG_P2P_CH1 ... NAU8540_REG_PEAK_CH4:
|
|
case NAU8540_REG_I2C_DEVICE_ID:
|
|
case NAU8540_REG_RST:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
|
|
static const DECLARE_TLV_DB_MINMAX(adc_vol_tlv, -12800, 3600);
|
|
static const DECLARE_TLV_DB_MINMAX(fepga_gain_tlv, -100, 3600);
|
|
|
|
static const struct snd_kcontrol_new nau8540_snd_controls[] = {
|
|
SOC_SINGLE_TLV("Mic1 Volume", NAU8540_REG_DIGITAL_GAIN_CH1,
|
|
0, 0x520, 0, adc_vol_tlv),
|
|
SOC_SINGLE_TLV("Mic2 Volume", NAU8540_REG_DIGITAL_GAIN_CH2,
|
|
0, 0x520, 0, adc_vol_tlv),
|
|
SOC_SINGLE_TLV("Mic3 Volume", NAU8540_REG_DIGITAL_GAIN_CH3,
|
|
0, 0x520, 0, adc_vol_tlv),
|
|
SOC_SINGLE_TLV("Mic4 Volume", NAU8540_REG_DIGITAL_GAIN_CH4,
|
|
0, 0x520, 0, adc_vol_tlv),
|
|
|
|
SOC_SINGLE_TLV("Frontend PGA1 Volume", NAU8540_REG_FEPGA3,
|
|
0, 0x25, 0, fepga_gain_tlv),
|
|
SOC_SINGLE_TLV("Frontend PGA2 Volume", NAU8540_REG_FEPGA3,
|
|
8, 0x25, 0, fepga_gain_tlv),
|
|
SOC_SINGLE_TLV("Frontend PGA3 Volume", NAU8540_REG_FEPGA4,
|
|
0, 0x25, 0, fepga_gain_tlv),
|
|
SOC_SINGLE_TLV("Frontend PGA4 Volume", NAU8540_REG_FEPGA4,
|
|
8, 0x25, 0, fepga_gain_tlv),
|
|
};
|
|
|
|
static const char * const adc_channel[] = {
|
|
"ADC channel 1", "ADC channel 2", "ADC channel 3", "ADC channel 4"
|
|
};
|
|
static SOC_ENUM_SINGLE_DECL(
|
|
digital_ch4_enum, NAU8540_REG_DIGITAL_MUX, 6, adc_channel);
|
|
|
|
static const struct snd_kcontrol_new digital_ch4_mux =
|
|
SOC_DAPM_ENUM("Digital CH4 Select", digital_ch4_enum);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(
|
|
digital_ch3_enum, NAU8540_REG_DIGITAL_MUX, 4, adc_channel);
|
|
|
|
static const struct snd_kcontrol_new digital_ch3_mux =
|
|
SOC_DAPM_ENUM("Digital CH3 Select", digital_ch3_enum);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(
|
|
digital_ch2_enum, NAU8540_REG_DIGITAL_MUX, 2, adc_channel);
|
|
|
|
static const struct snd_kcontrol_new digital_ch2_mux =
|
|
SOC_DAPM_ENUM("Digital CH2 Select", digital_ch2_enum);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(
|
|
digital_ch1_enum, NAU8540_REG_DIGITAL_MUX, 0, adc_channel);
|
|
|
|
static const struct snd_kcontrol_new digital_ch1_mux =
|
|
SOC_DAPM_ENUM("Digital CH1 Select", digital_ch1_enum);
|
|
|
|
static const struct snd_soc_dapm_widget nau8540_dapm_widgets[] = {
|
|
SND_SOC_DAPM_SUPPLY("MICBIAS2", NAU8540_REG_MIC_BIAS, 11, 0, NULL, 0),
|
|
SND_SOC_DAPM_SUPPLY("MICBIAS1", NAU8540_REG_MIC_BIAS, 10, 0, NULL, 0),
|
|
|
|
SND_SOC_DAPM_INPUT("MIC1"),
|
|
SND_SOC_DAPM_INPUT("MIC2"),
|
|
SND_SOC_DAPM_INPUT("MIC3"),
|
|
SND_SOC_DAPM_INPUT("MIC4"),
|
|
|
|
SND_SOC_DAPM_PGA("Frontend PGA1", NAU8540_REG_PWR, 12, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("Frontend PGA2", NAU8540_REG_PWR, 13, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("Frontend PGA3", NAU8540_REG_PWR, 14, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("Frontend PGA4", NAU8540_REG_PWR, 15, 0, NULL, 0),
|
|
|
|
SND_SOC_DAPM_ADC("ADC1", NULL,
|
|
NAU8540_REG_POWER_MANAGEMENT, 0, 0),
|
|
SND_SOC_DAPM_ADC("ADC2", NULL,
|
|
NAU8540_REG_POWER_MANAGEMENT, 1, 0),
|
|
SND_SOC_DAPM_ADC("ADC3", NULL,
|
|
NAU8540_REG_POWER_MANAGEMENT, 2, 0),
|
|
SND_SOC_DAPM_ADC("ADC4", NULL,
|
|
NAU8540_REG_POWER_MANAGEMENT, 3, 0),
|
|
|
|
SND_SOC_DAPM_PGA("ADC CH1", NAU8540_REG_ANALOG_PWR, 0, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("ADC CH2", NAU8540_REG_ANALOG_PWR, 1, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("ADC CH3", NAU8540_REG_ANALOG_PWR, 2, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("ADC CH4", NAU8540_REG_ANALOG_PWR, 3, 0, NULL, 0),
|
|
|
|
SND_SOC_DAPM_MUX("Digital CH4 Mux",
|
|
SND_SOC_NOPM, 0, 0, &digital_ch4_mux),
|
|
SND_SOC_DAPM_MUX("Digital CH3 Mux",
|
|
SND_SOC_NOPM, 0, 0, &digital_ch3_mux),
|
|
SND_SOC_DAPM_MUX("Digital CH2 Mux",
|
|
SND_SOC_NOPM, 0, 0, &digital_ch2_mux),
|
|
SND_SOC_DAPM_MUX("Digital CH1 Mux",
|
|
SND_SOC_NOPM, 0, 0, &digital_ch1_mux),
|
|
|
|
SND_SOC_DAPM_AIF_OUT("AIFTX", "Capture", 0, SND_SOC_NOPM, 0, 0),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route nau8540_dapm_routes[] = {
|
|
{"Frontend PGA1", NULL, "MIC1"},
|
|
{"Frontend PGA2", NULL, "MIC2"},
|
|
{"Frontend PGA3", NULL, "MIC3"},
|
|
{"Frontend PGA4", NULL, "MIC4"},
|
|
|
|
{"ADC1", NULL, "Frontend PGA1"},
|
|
{"ADC2", NULL, "Frontend PGA2"},
|
|
{"ADC3", NULL, "Frontend PGA3"},
|
|
{"ADC4", NULL, "Frontend PGA4"},
|
|
|
|
{"ADC CH1", NULL, "ADC1"},
|
|
{"ADC CH2", NULL, "ADC2"},
|
|
{"ADC CH3", NULL, "ADC3"},
|
|
{"ADC CH4", NULL, "ADC4"},
|
|
|
|
{"ADC1", NULL, "MICBIAS1"},
|
|
{"ADC2", NULL, "MICBIAS1"},
|
|
{"ADC3", NULL, "MICBIAS2"},
|
|
{"ADC4", NULL, "MICBIAS2"},
|
|
|
|
{"Digital CH1 Mux", "ADC channel 1", "ADC CH1"},
|
|
{"Digital CH1 Mux", "ADC channel 2", "ADC CH2"},
|
|
{"Digital CH1 Mux", "ADC channel 3", "ADC CH3"},
|
|
{"Digital CH1 Mux", "ADC channel 4", "ADC CH4"},
|
|
|
|
{"Digital CH2 Mux", "ADC channel 1", "ADC CH1"},
|
|
{"Digital CH2 Mux", "ADC channel 2", "ADC CH2"},
|
|
{"Digital CH2 Mux", "ADC channel 3", "ADC CH3"},
|
|
{"Digital CH2 Mux", "ADC channel 4", "ADC CH4"},
|
|
|
|
{"Digital CH3 Mux", "ADC channel 1", "ADC CH1"},
|
|
{"Digital CH3 Mux", "ADC channel 2", "ADC CH2"},
|
|
{"Digital CH3 Mux", "ADC channel 3", "ADC CH3"},
|
|
{"Digital CH3 Mux", "ADC channel 4", "ADC CH4"},
|
|
|
|
{"Digital CH4 Mux", "ADC channel 1", "ADC CH1"},
|
|
{"Digital CH4 Mux", "ADC channel 2", "ADC CH2"},
|
|
{"Digital CH4 Mux", "ADC channel 3", "ADC CH3"},
|
|
{"Digital CH4 Mux", "ADC channel 4", "ADC CH4"},
|
|
|
|
{"AIFTX", NULL, "Digital CH1 Mux"},
|
|
{"AIFTX", NULL, "Digital CH2 Mux"},
|
|
{"AIFTX", NULL, "Digital CH3 Mux"},
|
|
{"AIFTX", NULL, "Digital CH4 Mux"},
|
|
};
|
|
|
|
static int nau8540_clock_check(struct nau8540 *nau8540, int rate, int osr)
|
|
{
|
|
int osrate;
|
|
|
|
if (osr >= ARRAY_SIZE(osr_adc_sel))
|
|
return -EINVAL;
|
|
osrate = osr_adc_sel[osr].osr;
|
|
|
|
if (rate * osr > CLK_ADC_MAX) {
|
|
dev_err(nau8540->dev, "exceed the maximum frequency of CLK_ADC\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nau8540_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_codec *codec = dai->codec;
|
|
struct nau8540 *nau8540 = snd_soc_codec_get_drvdata(codec);
|
|
unsigned int val_len = 0, osr;
|
|
|
|
/* CLK_ADC = OSR * FS
|
|
* ADC clock frequency is defined as Over Sampling Rate (OSR)
|
|
* multiplied by the audio sample rate (Fs). Note that the OSR and Fs
|
|
* values must be selected such that the maximum frequency is less
|
|
* than 6.144 MHz.
|
|
*/
|
|
regmap_read(nau8540->regmap, NAU8540_REG_ADC_SAMPLE_RATE, &osr);
|
|
osr &= NAU8540_ADC_OSR_MASK;
|
|
if (nau8540_clock_check(nau8540, params_rate(params), osr))
|
|
return -EINVAL;
|
|
regmap_update_bits(nau8540->regmap, NAU8540_REG_CLOCK_SRC,
|
|
NAU8540_CLK_ADC_SRC_MASK,
|
|
osr_adc_sel[osr].clk_src << NAU8540_CLK_ADC_SRC_SFT);
|
|
|
|
switch (params_width(params)) {
|
|
case 16:
|
|
val_len |= NAU8540_I2S_DL_16;
|
|
break;
|
|
case 20:
|
|
val_len |= NAU8540_I2S_DL_20;
|
|
break;
|
|
case 24:
|
|
val_len |= NAU8540_I2S_DL_24;
|
|
break;
|
|
case 32:
|
|
val_len |= NAU8540_I2S_DL_32;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
regmap_update_bits(nau8540->regmap, NAU8540_REG_PCM_CTRL0,
|
|
NAU8540_I2S_DL_MASK, val_len);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nau8540_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
|
|
{
|
|
struct snd_soc_codec *codec = dai->codec;
|
|
struct nau8540 *nau8540 = snd_soc_codec_get_drvdata(codec);
|
|
unsigned int ctrl1_val = 0, ctrl2_val = 0;
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
ctrl2_val |= NAU8540_I2S_MS_MASTER;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
ctrl1_val |= NAU8540_I2S_BP_INV;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
ctrl1_val |= NAU8540_I2S_DF_I2S;
|
|
break;
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
ctrl1_val |= NAU8540_I2S_DF_LEFT;
|
|
break;
|
|
case SND_SOC_DAIFMT_RIGHT_J:
|
|
ctrl1_val |= NAU8540_I2S_DF_RIGTH;
|
|
break;
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
ctrl1_val |= NAU8540_I2S_DF_PCM_AB;
|
|
break;
|
|
case SND_SOC_DAIFMT_DSP_B:
|
|
ctrl1_val |= NAU8540_I2S_DF_PCM_AB;
|
|
ctrl1_val |= NAU8540_I2S_PCMB_EN;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
regmap_update_bits(nau8540->regmap, NAU8540_REG_PCM_CTRL0,
|
|
NAU8540_I2S_DL_MASK | NAU8540_I2S_DF_MASK |
|
|
NAU8540_I2S_BP_INV | NAU8540_I2S_PCMB_EN, ctrl1_val);
|
|
regmap_update_bits(nau8540->regmap, NAU8540_REG_PCM_CTRL1,
|
|
NAU8540_I2S_MS_MASK | NAU8540_I2S_DO12_OE, ctrl2_val);
|
|
regmap_update_bits(nau8540->regmap, NAU8540_REG_PCM_CTRL2,
|
|
NAU8540_I2S_DO34_OE, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* nau8540_set_tdm_slot - configure DAI TX TDM.
|
|
* @dai: DAI
|
|
* @tx_mask: bitmask representing active TX slots. Ex.
|
|
* 0xf for normal 4 channel TDM.
|
|
* 0xf0 for shifted 4 channel TDM
|
|
* @rx_mask: no used.
|
|
* @slots: Number of slots in use.
|
|
* @slot_width: Width in bits for each slot.
|
|
*
|
|
* Configures a DAI for TDM operation. Only support 4 slots TDM.
|
|
*/
|
|
static int nau8540_set_tdm_slot(struct snd_soc_dai *dai,
|
|
unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width)
|
|
{
|
|
struct snd_soc_codec *codec = dai->codec;
|
|
struct nau8540 *nau8540 = snd_soc_codec_get_drvdata(codec);
|
|
unsigned int ctrl2_val = 0, ctrl4_val = 0;
|
|
|
|
if (slots > 4 || ((tx_mask & 0xf0) && (tx_mask & 0xf)))
|
|
return -EINVAL;
|
|
|
|
ctrl4_val |= (NAU8540_TDM_MODE | NAU8540_TDM_OFFSET_EN);
|
|
if (tx_mask & 0xf0) {
|
|
ctrl2_val = 4 * slot_width;
|
|
ctrl4_val |= (tx_mask >> 4);
|
|
} else {
|
|
ctrl4_val |= tx_mask;
|
|
}
|
|
regmap_update_bits(nau8540->regmap, NAU8540_REG_PCM_CTRL4,
|
|
NAU8540_TDM_MODE | NAU8540_TDM_OFFSET_EN |
|
|
NAU8540_TDM_TX_MASK, ctrl4_val);
|
|
regmap_update_bits(nau8540->regmap, NAU8540_REG_PCM_CTRL1,
|
|
NAU8540_I2S_DO12_OE, NAU8540_I2S_DO12_OE);
|
|
regmap_update_bits(nau8540->regmap, NAU8540_REG_PCM_CTRL2,
|
|
NAU8540_I2S_DO34_OE | NAU8540_I2S_TSLOT_L_MASK,
|
|
NAU8540_I2S_DO34_OE | ctrl2_val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static const struct snd_soc_dai_ops nau8540_dai_ops = {
|
|
.hw_params = nau8540_hw_params,
|
|
.set_fmt = nau8540_set_fmt,
|
|
.set_tdm_slot = nau8540_set_tdm_slot,
|
|
};
|
|
|
|
#define NAU8540_RATES SNDRV_PCM_RATE_8000_48000
|
|
#define NAU8540_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE \
|
|
| SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE)
|
|
|
|
static struct snd_soc_dai_driver nau8540_dai = {
|
|
.name = "nau8540-hifi",
|
|
.capture = {
|
|
.stream_name = "Capture",
|
|
.channels_min = 1,
|
|
.channels_max = 4,
|
|
.rates = NAU8540_RATES,
|
|
.formats = NAU8540_FORMATS,
|
|
},
|
|
.ops = &nau8540_dai_ops,
|
|
};
|
|
|
|
/**
|
|
* nau8540_calc_fll_param - Calculate FLL parameters.
|
|
* @fll_in: external clock provided to codec.
|
|
* @fs: sampling rate.
|
|
* @fll_param: Pointer to structure of FLL parameters.
|
|
*
|
|
* Calculate FLL parameters to configure codec.
|
|
*
|
|
* Returns 0 for success or negative error code.
|
|
*/
|
|
static int nau8540_calc_fll_param(unsigned int fll_in,
|
|
unsigned int fs, struct nau8540_fll *fll_param)
|
|
{
|
|
u64 fvco, fvco_max;
|
|
unsigned int fref, i, fvco_sel;
|
|
|
|
/* Ensure the reference clock frequency (FREF) is <= 13.5MHz by dividing
|
|
* freq_in by 1, 2, 4, or 8 using FLL pre-scalar.
|
|
* FREF = freq_in / NAU8540_FLL_REF_DIV_MASK
|
|
*/
|
|
for (i = 0; i < ARRAY_SIZE(fll_pre_scalar); i++) {
|
|
fref = fll_in / fll_pre_scalar[i].param;
|
|
if (fref <= NAU_FREF_MAX)
|
|
break;
|
|
}
|
|
if (i == ARRAY_SIZE(fll_pre_scalar))
|
|
return -EINVAL;
|
|
fll_param->clk_ref_div = fll_pre_scalar[i].val;
|
|
|
|
/* Choose the FLL ratio based on FREF */
|
|
for (i = 0; i < ARRAY_SIZE(fll_ratio); i++) {
|
|
if (fref >= fll_ratio[i].param)
|
|
break;
|
|
}
|
|
if (i == ARRAY_SIZE(fll_ratio))
|
|
return -EINVAL;
|
|
fll_param->ratio = fll_ratio[i].val;
|
|
|
|
/* Calculate the frequency of DCO (FDCO) given freq_out = 256 * Fs.
|
|
* FDCO must be within the 90MHz - 124MHz or the FFL cannot be
|
|
* guaranteed across the full range of operation.
|
|
* FDCO = freq_out * 2 * mclk_src_scaling
|
|
*/
|
|
fvco_max = 0;
|
|
fvco_sel = ARRAY_SIZE(mclk_src_scaling);
|
|
for (i = 0; i < ARRAY_SIZE(mclk_src_scaling); i++) {
|
|
fvco = 256 * fs * 2 * mclk_src_scaling[i].param;
|
|
if (fvco > NAU_FVCO_MIN && fvco < NAU_FVCO_MAX &&
|
|
fvco_max < fvco) {
|
|
fvco_max = fvco;
|
|
fvco_sel = i;
|
|
}
|
|
}
|
|
if (ARRAY_SIZE(mclk_src_scaling) == fvco_sel)
|
|
return -EINVAL;
|
|
fll_param->mclk_src = mclk_src_scaling[fvco_sel].val;
|
|
|
|
/* Calculate the FLL 10-bit integer input and the FLL 16-bit fractional
|
|
* input based on FDCO, FREF and FLL ratio.
|
|
*/
|
|
fvco = div_u64(fvco_max << 16, fref * fll_param->ratio);
|
|
fll_param->fll_int = (fvco >> 16) & 0x3FF;
|
|
fll_param->fll_frac = fvco & 0xFFFF;
|
|
return 0;
|
|
}
|
|
|
|
static void nau8540_fll_apply(struct regmap *regmap,
|
|
struct nau8540_fll *fll_param)
|
|
{
|
|
regmap_update_bits(regmap, NAU8540_REG_CLOCK_SRC,
|
|
NAU8540_CLK_SRC_MASK | NAU8540_CLK_MCLK_SRC_MASK,
|
|
NAU8540_CLK_SRC_MCLK | fll_param->mclk_src);
|
|
regmap_update_bits(regmap, NAU8540_REG_FLL1,
|
|
NAU8540_FLL_RATIO_MASK, fll_param->ratio);
|
|
/* FLL 16-bit fractional input */
|
|
regmap_write(regmap, NAU8540_REG_FLL2, fll_param->fll_frac);
|
|
/* FLL 10-bit integer input */
|
|
regmap_update_bits(regmap, NAU8540_REG_FLL3,
|
|
NAU8540_FLL_INTEGER_MASK, fll_param->fll_int);
|
|
/* FLL pre-scaler */
|
|
regmap_update_bits(regmap, NAU8540_REG_FLL4,
|
|
NAU8540_FLL_REF_DIV_MASK,
|
|
fll_param->clk_ref_div << NAU8540_FLL_REF_DIV_SFT);
|
|
regmap_update_bits(regmap, NAU8540_REG_FLL5,
|
|
NAU8540_FLL_CLK_SW_MASK, NAU8540_FLL_CLK_SW_REF);
|
|
regmap_update_bits(regmap,
|
|
NAU8540_REG_FLL6, NAU8540_DCO_EN, 0);
|
|
if (fll_param->fll_frac) {
|
|
regmap_update_bits(regmap, NAU8540_REG_FLL5,
|
|
NAU8540_FLL_PDB_DAC_EN | NAU8540_FLL_LOOP_FTR_EN |
|
|
NAU8540_FLL_FTR_SW_MASK,
|
|
NAU8540_FLL_PDB_DAC_EN | NAU8540_FLL_LOOP_FTR_EN |
|
|
NAU8540_FLL_FTR_SW_FILTER);
|
|
regmap_update_bits(regmap, NAU8540_REG_FLL6,
|
|
NAU8540_SDM_EN, NAU8540_SDM_EN);
|
|
} else {
|
|
regmap_update_bits(regmap, NAU8540_REG_FLL5,
|
|
NAU8540_FLL_PDB_DAC_EN | NAU8540_FLL_LOOP_FTR_EN |
|
|
NAU8540_FLL_FTR_SW_MASK, NAU8540_FLL_FTR_SW_ACCU);
|
|
regmap_update_bits(regmap,
|
|
NAU8540_REG_FLL6, NAU8540_SDM_EN, 0);
|
|
}
|
|
}
|
|
|
|
/* freq_out must be 256*Fs in order to achieve the best performance */
|
|
static int nau8540_set_pll(struct snd_soc_codec *codec, int pll_id, int source,
|
|
unsigned int freq_in, unsigned int freq_out)
|
|
{
|
|
struct nau8540 *nau8540 = snd_soc_codec_get_drvdata(codec);
|
|
struct nau8540_fll fll_param;
|
|
int ret, fs;
|
|
|
|
switch (pll_id) {
|
|
case NAU8540_CLK_FLL_MCLK:
|
|
regmap_update_bits(nau8540->regmap, NAU8540_REG_FLL3,
|
|
NAU8540_FLL_CLK_SRC_MASK, NAU8540_FLL_CLK_SRC_MCLK);
|
|
break;
|
|
|
|
case NAU8540_CLK_FLL_BLK:
|
|
regmap_update_bits(nau8540->regmap, NAU8540_REG_FLL3,
|
|
NAU8540_FLL_CLK_SRC_MASK, NAU8540_FLL_CLK_SRC_BLK);
|
|
break;
|
|
|
|
case NAU8540_CLK_FLL_FS:
|
|
regmap_update_bits(nau8540->regmap, NAU8540_REG_FLL3,
|
|
NAU8540_FLL_CLK_SRC_MASK, NAU8540_FLL_CLK_SRC_FS);
|
|
break;
|
|
|
|
default:
|
|
dev_err(nau8540->dev, "Invalid clock id (%d)\n", pll_id);
|
|
return -EINVAL;
|
|
}
|
|
dev_dbg(nau8540->dev, "Sysclk is %dHz and clock id is %d\n",
|
|
freq_out, pll_id);
|
|
|
|
fs = freq_out / 256;
|
|
ret = nau8540_calc_fll_param(freq_in, fs, &fll_param);
|
|
if (ret < 0) {
|
|
dev_err(nau8540->dev, "Unsupported input clock %d\n", freq_in);
|
|
return ret;
|
|
}
|
|
dev_dbg(nau8540->dev, "mclk_src=%x ratio=%x fll_frac=%x fll_int=%x clk_ref_div=%x\n",
|
|
fll_param.mclk_src, fll_param.ratio, fll_param.fll_frac,
|
|
fll_param.fll_int, fll_param.clk_ref_div);
|
|
|
|
nau8540_fll_apply(nau8540->regmap, &fll_param);
|
|
mdelay(2);
|
|
regmap_update_bits(nau8540->regmap, NAU8540_REG_CLOCK_SRC,
|
|
NAU8540_CLK_SRC_MASK, NAU8540_CLK_SRC_VCO);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nau8540_set_sysclk(struct snd_soc_codec *codec,
|
|
int clk_id, int source, unsigned int freq, int dir)
|
|
{
|
|
struct nau8540 *nau8540 = snd_soc_codec_get_drvdata(codec);
|
|
|
|
switch (clk_id) {
|
|
case NAU8540_CLK_DIS:
|
|
case NAU8540_CLK_MCLK:
|
|
regmap_update_bits(nau8540->regmap, NAU8540_REG_CLOCK_SRC,
|
|
NAU8540_CLK_SRC_MASK, NAU8540_CLK_SRC_MCLK);
|
|
regmap_update_bits(nau8540->regmap, NAU8540_REG_FLL6,
|
|
NAU8540_DCO_EN, 0);
|
|
break;
|
|
|
|
case NAU8540_CLK_INTERNAL:
|
|
regmap_update_bits(nau8540->regmap, NAU8540_REG_FLL6,
|
|
NAU8540_DCO_EN, NAU8540_DCO_EN);
|
|
regmap_update_bits(nau8540->regmap, NAU8540_REG_CLOCK_SRC,
|
|
NAU8540_CLK_SRC_MASK, NAU8540_CLK_SRC_VCO);
|
|
break;
|
|
|
|
default:
|
|
dev_err(nau8540->dev, "Invalid clock id (%d)\n", clk_id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
dev_dbg(nau8540->dev, "Sysclk is %dHz and clock id is %d\n",
|
|
freq, clk_id);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void nau8540_reset_chip(struct regmap *regmap)
|
|
{
|
|
regmap_write(regmap, NAU8540_REG_SW_RESET, 0x00);
|
|
regmap_write(regmap, NAU8540_REG_SW_RESET, 0x00);
|
|
}
|
|
|
|
static void nau8540_init_regs(struct nau8540 *nau8540)
|
|
{
|
|
struct regmap *regmap = nau8540->regmap;
|
|
|
|
/* Enable Bias/VMID/VMID Tieoff */
|
|
regmap_update_bits(regmap, NAU8540_REG_VMID_CTRL,
|
|
NAU8540_VMID_EN | NAU8540_VMID_SEL_MASK,
|
|
NAU8540_VMID_EN | (0x2 << NAU8540_VMID_SEL_SFT));
|
|
regmap_update_bits(regmap, NAU8540_REG_REFERENCE,
|
|
NAU8540_PRECHARGE_DIS | NAU8540_GLOBAL_BIAS_EN,
|
|
NAU8540_PRECHARGE_DIS | NAU8540_GLOBAL_BIAS_EN);
|
|
mdelay(2);
|
|
regmap_update_bits(regmap, NAU8540_REG_MIC_BIAS,
|
|
NAU8540_PU_PRE, NAU8540_PU_PRE);
|
|
regmap_update_bits(regmap, NAU8540_REG_CLOCK_CTRL,
|
|
NAU8540_CLK_ADC_EN | NAU8540_CLK_I2S_EN,
|
|
NAU8540_CLK_ADC_EN | NAU8540_CLK_I2S_EN);
|
|
/* ADC OSR selection, CLK_ADC = Fs * OSR */
|
|
regmap_update_bits(regmap, NAU8540_REG_ADC_SAMPLE_RATE,
|
|
NAU8540_ADC_OSR_MASK, NAU8540_ADC_OSR_64);
|
|
}
|
|
|
|
static int __maybe_unused nau8540_suspend(struct snd_soc_codec *codec)
|
|
{
|
|
struct nau8540 *nau8540 = snd_soc_codec_get_drvdata(codec);
|
|
|
|
regcache_cache_only(nau8540->regmap, true);
|
|
regcache_mark_dirty(nau8540->regmap);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused nau8540_resume(struct snd_soc_codec *codec)
|
|
{
|
|
struct nau8540 *nau8540 = snd_soc_codec_get_drvdata(codec);
|
|
|
|
regcache_cache_only(nau8540->regmap, false);
|
|
regcache_sync(nau8540->regmap);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct snd_soc_codec_driver nau8540_codec_driver = {
|
|
.set_sysclk = nau8540_set_sysclk,
|
|
.set_pll = nau8540_set_pll,
|
|
.suspend = nau8540_suspend,
|
|
.resume = nau8540_resume,
|
|
.suspend_bias_off = true,
|
|
|
|
.component_driver = {
|
|
.controls = nau8540_snd_controls,
|
|
.num_controls = ARRAY_SIZE(nau8540_snd_controls),
|
|
.dapm_widgets = nau8540_dapm_widgets,
|
|
.num_dapm_widgets = ARRAY_SIZE(nau8540_dapm_widgets),
|
|
.dapm_routes = nau8540_dapm_routes,
|
|
.num_dapm_routes = ARRAY_SIZE(nau8540_dapm_routes),
|
|
},
|
|
};
|
|
|
|
static const struct regmap_config nau8540_regmap_config = {
|
|
.val_bits = 16,
|
|
.reg_bits = 16,
|
|
|
|
.max_register = NAU8540_REG_MAX,
|
|
.readable_reg = nau8540_readable_reg,
|
|
.writeable_reg = nau8540_writeable_reg,
|
|
.volatile_reg = nau8540_volatile_reg,
|
|
|
|
.cache_type = REGCACHE_RBTREE,
|
|
.reg_defaults = nau8540_reg_defaults,
|
|
.num_reg_defaults = ARRAY_SIZE(nau8540_reg_defaults),
|
|
};
|
|
|
|
static int nau8540_i2c_probe(struct i2c_client *i2c,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct device *dev = &i2c->dev;
|
|
struct nau8540 *nau8540 = dev_get_platdata(dev);
|
|
int ret, value;
|
|
|
|
if (!nau8540) {
|
|
nau8540 = devm_kzalloc(dev, sizeof(*nau8540), GFP_KERNEL);
|
|
if (!nau8540)
|
|
return -ENOMEM;
|
|
}
|
|
i2c_set_clientdata(i2c, nau8540);
|
|
|
|
nau8540->regmap = devm_regmap_init_i2c(i2c, &nau8540_regmap_config);
|
|
if (IS_ERR(nau8540->regmap))
|
|
return PTR_ERR(nau8540->regmap);
|
|
ret = regmap_read(nau8540->regmap, NAU8540_REG_I2C_DEVICE_ID, &value);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to read device id from the NAU85L40: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
nau8540->dev = dev;
|
|
nau8540_reset_chip(nau8540->regmap);
|
|
nau8540_init_regs(nau8540);
|
|
|
|
return snd_soc_register_codec(dev,
|
|
&nau8540_codec_driver, &nau8540_dai, 1);
|
|
}
|
|
|
|
static int nau8540_i2c_remove(struct i2c_client *client)
|
|
{
|
|
snd_soc_unregister_codec(&client->dev);
|
|
return 0;
|
|
}
|
|
|
|
|
|
static const struct i2c_device_id nau8540_i2c_ids[] = {
|
|
{ "nau8540", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, nau8540_i2c_ids);
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id nau8540_of_ids[] = {
|
|
{ .compatible = "nuvoton,nau8540", },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, nau8540_of_ids);
|
|
#endif
|
|
|
|
static struct i2c_driver nau8540_i2c_driver = {
|
|
.driver = {
|
|
.name = "nau8540",
|
|
.of_match_table = of_match_ptr(nau8540_of_ids),
|
|
},
|
|
.probe = nau8540_i2c_probe,
|
|
.remove = nau8540_i2c_remove,
|
|
.id_table = nau8540_i2c_ids,
|
|
};
|
|
module_i2c_driver(nau8540_i2c_driver);
|
|
|
|
MODULE_DESCRIPTION("ASoC NAU85L40 driver");
|
|
MODULE_AUTHOR("John Hsu <KCHSU0@nuvoton.com>");
|
|
MODULE_LICENSE("GPL v2");
|