Claire Chang 9315ad99ed uart: mediatek: support Rx in-band wakeup ... In order to support Rx in-band wakeup, we need to enable irq wake on an edge sensitive interrupt of Rx pin before suspend and disable it when resuming. This interrupt is used only as wake source to resume the system when suspended. Note that the sent character will be lost as the controller is actually suspended. We use this to support wakeup on bluetooth. Bluetooth will repeatedly send 0xFD to wakeup host. Once host detects Rx falling, an interrupt is triggered, and the system leaves sleep state. Then, the bluetooth driver will send 0xFC to bluetooth and bluetooth can start to send normal HCI packets. Signed-off-by: Claire Chang <tientzu@chromium.org> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>		2019-06-10 19:10:27 +02:00
..
hvc	RISC-V Patches for the 5.2 Merge Window, Part 1 v3	2019-05-19 09:56:36 -07:00
ipwireless	tty: add SPDX identifiers to Kconfig and Makefiles	2019-04-04 18:48:43 +02:00
serdev	tty: add SPDX identifiers to Kconfig and Makefiles	2019-04-04 18:48:43 +02:00
serial	uart: mediatek: support Rx in-band wakeup	2019-06-10 19:10:27 +02:00
vt	Revert "consolemap: Fix a memory leaking bug in drivers/tty/vt/consolemap.c"	2019-06-04 21:01:58 +02:00
amiserial.c	kill TIOCSERGSTRUCT	2018-10-13 00:50:53 -04:00
cyclades.c	cyclades: switch to ->[sg]et_serial()	2018-10-13 00:50:30 -04:00
ehv_bytechan.c	tty: Convert to using %pOFn instead of device_node.name	2018-09-18 16:07:25 +02:00
goldfish.c
isicom.c	isicom: switch to ->[sg]et_serial()	2018-10-13 00:50:31 -04:00
Kconfig	docs: serial: convert docs to ReST and rename to *.rst	2019-04-25 11:37:42 +02:00
Makefile	tty: Add NULL TTY driver	2019-04-16 15:21:34 +02:00
mips_ejtag_fdc.c
moxa.c	moxa: switch to ->[sg]et_serial()	2018-10-13 00:50:32 -04:00
moxa.h
mxser.c	mxser: switch to ->[sg]et_serial()	2018-10-13 00:50:32 -04:00
mxser.h
n_gsm.c	tty: n_gsm: Mark expected switch fall-throughs	2019-02-26 12:30:44 +01:00
n_hdlc.c	tty/n_hdlc: mark expected switch fall-through	2019-02-14 10:49:19 +01:00
n_null.c
n_r3964.c	tty: Don't block on IO when ldisc change is pending	2018-12-05 12:16:33 +01:00
n_tracerouter.c
n_tracesink.c
n_tracesink.h
n_tty.c	n_tty: check for negative and zero space return from tty_write_room	2019-04-16 15:21:33 +02:00
nozomi.c	tty/nozomi: use pci_iomap instead of ioremap_nocache	2019-02-12 10:26:45 +01:00
pty.c	Revert "tty: pty: Fix race condition between release_one_tty and pty_write"	2019-03-29 15:47:40 +01:00
rocket.c	TTY/Serial patches for 5.2-rc1	2019-05-08 10:07:28 -07:00
rocket.h	tty: rocket: Remove RCPK_GET_STRUCT ioctl	2019-04-25 11:58:56 +02:00
rocket_int.h
synclink.c	tty/synclink: remove ISA support	2019-02-12 08:51:33 +01:00
synclink_gt.c	synclink_gt(): fix compat_ioctl()	2018-10-13 00:50:52 -04:00
synclinkmp.c	synclink: reduce pointless checks in ->ioctl()	2018-10-13 00:50:43 -04:00
sysrq.c	panic: avoid the extra noise dmesg	2019-05-14 19:52:51 -07:00
tty_audit.c	audit: join tty records to their syscall	2019-02-07 21:33:54 -05:00
tty_baudrate.c	termios, tty/tty_baudrate.c: fix buffer overrun	2018-11-08 03:36:45 -08:00
tty_buffer.c	tty: increase the default flip buffer limit to 2*640K	2019-01-30 12:03:58 +01:00
tty_io.c	tty: tty_io: fix driver refcount imbalance on error path	2019-05-24 10:09:12 +02:00
tty_ioctl.c	move compat handling of tty ioctls to tty_compat_ioctl()	2018-09-14 11:12:17 -04:00
tty_jobctrl.c	tty: fix read of tty->pgrp outside of ctrl_lock	2019-03-28 01:28:23 +09:00
tty_ldisc.c	tty: ldisc: add sysctl to prevent autoloading of ldiscs	2019-01-30 09:31:30 +01:00
tty_ldsem.c	tty/ldsem: Decrement wait_readers on timeouted down_read()	2018-12-05 12:16:33 +01:00
tty_mutex.c
tty_port.c	Revert "tty: fix NULL pointer issue when tty_port ops is not set"	2019-04-16 15:21:34 +02:00
ttynull.c	tty: Add NULL TTY driver	2019-04-16 15:21:34 +02:00
vcc.c	tty: fix up a few remaining files without SPDX identifiers	2019-04-04 18:48:43 +02:00