linux-stable/arch/x86/math-emu/errors.c
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

685 lines
18 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*---------------------------------------------------------------------------+
| errors.c |
| |
| The error handling functions for wm-FPU-emu |
| |
| Copyright (C) 1992,1993,1994,1996 |
| W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
| E-mail billm@jacobi.maths.monash.edu.au |
| |
| |
+---------------------------------------------------------------------------*/
/*---------------------------------------------------------------------------+
| Note: |
| The file contains code which accesses user memory. |
| Emulator static data may change when user memory is accessed, due to |
| other processes using the emulator while swapping is in progress. |
+---------------------------------------------------------------------------*/
#include <linux/signal.h>
#include <linux/uaccess.h>
#include "fpu_emu.h"
#include "fpu_system.h"
#include "exception.h"
#include "status_w.h"
#include "control_w.h"
#include "reg_constant.h"
#include "version.h"
/* */
#undef PRINT_MESSAGES
/* */
#if 0
void Un_impl(void)
{
u_char byte1, FPU_modrm;
unsigned long address = FPU_ORIG_EIP;
RE_ENTRANT_CHECK_OFF;
/* No need to check access_ok(), we have previously fetched these bytes. */
printk("Unimplemented FPU Opcode at eip=%p : ", (void __user *)address);
if (FPU_CS == __USER_CS) {
while (1) {
FPU_get_user(byte1, (u_char __user *) address);
if ((byte1 & 0xf8) == 0xd8)
break;
printk("[%02x]", byte1);
address++;
}
printk("%02x ", byte1);
FPU_get_user(FPU_modrm, 1 + (u_char __user *) address);
if (FPU_modrm >= 0300)
printk("%02x (%02x+%d)\n", FPU_modrm, FPU_modrm & 0xf8,
FPU_modrm & 7);
else
printk("/%d\n", (FPU_modrm >> 3) & 7);
} else {
printk("cs selector = %04x\n", FPU_CS);
}
RE_ENTRANT_CHECK_ON;
EXCEPTION(EX_Invalid);
}
#endif /* 0 */
/*
Called for opcodes which are illegal and which are known to result in a
SIGILL with a real 80486.
*/
void FPU_illegal(void)
{
math_abort(FPU_info, SIGILL);
}
void FPU_printall(void)
{
int i;
static const char *tag_desc[] = { "Valid", "Zero", "ERROR", "Empty",
"DeNorm", "Inf", "NaN"
};
u_char byte1, FPU_modrm;
unsigned long address = FPU_ORIG_EIP;
RE_ENTRANT_CHECK_OFF;
/* No need to check access_ok(), we have previously fetched these bytes. */
printk("At %p:", (void *)address);
if (FPU_CS == __USER_CS) {
#define MAX_PRINTED_BYTES 20
for (i = 0; i < MAX_PRINTED_BYTES; i++) {
FPU_get_user(byte1, (u_char __user *) address);
if ((byte1 & 0xf8) == 0xd8) {
printk(" %02x", byte1);
break;
}
printk(" [%02x]", byte1);
address++;
}
if (i == MAX_PRINTED_BYTES)
printk(" [more..]\n");
else {
FPU_get_user(FPU_modrm, 1 + (u_char __user *) address);
if (FPU_modrm >= 0300)
printk(" %02x (%02x+%d)\n", FPU_modrm,
FPU_modrm & 0xf8, FPU_modrm & 7);
else
printk(" /%d, mod=%d rm=%d\n",
(FPU_modrm >> 3) & 7,
(FPU_modrm >> 6) & 3, FPU_modrm & 7);
}
} else {
printk("%04x\n", FPU_CS);
}
partial_status = status_word();
#ifdef DEBUGGING
if (partial_status & SW_Backward)
printk("SW: backward compatibility\n");
if (partial_status & SW_C3)
printk("SW: condition bit 3\n");
if (partial_status & SW_C2)
printk("SW: condition bit 2\n");
if (partial_status & SW_C1)
printk("SW: condition bit 1\n");
if (partial_status & SW_C0)
printk("SW: condition bit 0\n");
if (partial_status & SW_Summary)
printk("SW: exception summary\n");
if (partial_status & SW_Stack_Fault)
printk("SW: stack fault\n");
if (partial_status & SW_Precision)
printk("SW: loss of precision\n");
if (partial_status & SW_Underflow)
printk("SW: underflow\n");
if (partial_status & SW_Overflow)
printk("SW: overflow\n");
if (partial_status & SW_Zero_Div)
printk("SW: divide by zero\n");
if (partial_status & SW_Denorm_Op)
printk("SW: denormalized operand\n");
if (partial_status & SW_Invalid)
printk("SW: invalid operation\n");
#endif /* DEBUGGING */
printk(" SW: b=%d st=%d es=%d sf=%d cc=%d%d%d%d ef=%d%d%d%d%d%d\n", partial_status & 0x8000 ? 1 : 0, /* busy */
(partial_status & 0x3800) >> 11, /* stack top pointer */
partial_status & 0x80 ? 1 : 0, /* Error summary status */
partial_status & 0x40 ? 1 : 0, /* Stack flag */
partial_status & SW_C3 ? 1 : 0, partial_status & SW_C2 ? 1 : 0, /* cc */
partial_status & SW_C1 ? 1 : 0, partial_status & SW_C0 ? 1 : 0, /* cc */
partial_status & SW_Precision ? 1 : 0,
partial_status & SW_Underflow ? 1 : 0,
partial_status & SW_Overflow ? 1 : 0,
partial_status & SW_Zero_Div ? 1 : 0,
partial_status & SW_Denorm_Op ? 1 : 0,
partial_status & SW_Invalid ? 1 : 0);
printk(" CW: ic=%d rc=%d%d pc=%d%d iem=%d ef=%d%d%d%d%d%d\n",
control_word & 0x1000 ? 1 : 0,
(control_word & 0x800) >> 11, (control_word & 0x400) >> 10,
(control_word & 0x200) >> 9, (control_word & 0x100) >> 8,
control_word & 0x80 ? 1 : 0,
control_word & SW_Precision ? 1 : 0,
control_word & SW_Underflow ? 1 : 0,
control_word & SW_Overflow ? 1 : 0,
control_word & SW_Zero_Div ? 1 : 0,
control_word & SW_Denorm_Op ? 1 : 0,
control_word & SW_Invalid ? 1 : 0);
for (i = 0; i < 8; i++) {
FPU_REG *r = &st(i);
u_char tagi = FPU_gettagi(i);
switch (tagi) {
case TAG_Empty:
continue;
break;
case TAG_Zero:
case TAG_Special:
tagi = FPU_Special(r);
case TAG_Valid:
printk("st(%d) %c .%04lx %04lx %04lx %04lx e%+-6d ", i,
getsign(r) ? '-' : '+',
(long)(r->sigh >> 16),
(long)(r->sigh & 0xFFFF),
(long)(r->sigl >> 16),
(long)(r->sigl & 0xFFFF),
exponent(r) - EXP_BIAS + 1);
break;
default:
printk("Whoops! Error in errors.c: tag%d is %d ", i,
tagi);
continue;
break;
}
printk("%s\n", tag_desc[(int)(unsigned)tagi]);
}
RE_ENTRANT_CHECK_ON;
}
static struct {
int type;
const char *name;
} exception_names[] = {
{
EX_StackOver, "stack overflow"}, {
EX_StackUnder, "stack underflow"}, {
EX_Precision, "loss of precision"}, {
EX_Underflow, "underflow"}, {
EX_Overflow, "overflow"}, {
EX_ZeroDiv, "divide by zero"}, {
EX_Denormal, "denormalized operand"}, {
EX_Invalid, "invalid operation"}, {
EX_INTERNAL, "INTERNAL BUG in " FPU_VERSION}, {
0, NULL}
};
/*
EX_INTERNAL is always given with a code which indicates where the
error was detected.
Internal error types:
0x14 in fpu_etc.c
0x1nn in a *.c file:
0x101 in reg_add_sub.c
0x102 in reg_mul.c
0x104 in poly_atan.c
0x105 in reg_mul.c
0x107 in fpu_trig.c
0x108 in reg_compare.c
0x109 in reg_compare.c
0x110 in reg_add_sub.c
0x111 in fpe_entry.c
0x112 in fpu_trig.c
0x113 in errors.c
0x115 in fpu_trig.c
0x116 in fpu_trig.c
0x117 in fpu_trig.c
0x118 in fpu_trig.c
0x119 in fpu_trig.c
0x120 in poly_atan.c
0x121 in reg_compare.c
0x122 in reg_compare.c
0x123 in reg_compare.c
0x125 in fpu_trig.c
0x126 in fpu_entry.c
0x127 in poly_2xm1.c
0x128 in fpu_entry.c
0x129 in fpu_entry.c
0x130 in get_address.c
0x131 in get_address.c
0x132 in get_address.c
0x133 in get_address.c
0x140 in load_store.c
0x141 in load_store.c
0x150 in poly_sin.c
0x151 in poly_sin.c
0x160 in reg_ld_str.c
0x161 in reg_ld_str.c
0x162 in reg_ld_str.c
0x163 in reg_ld_str.c
0x164 in reg_ld_str.c
0x170 in fpu_tags.c
0x171 in fpu_tags.c
0x172 in fpu_tags.c
0x180 in reg_convert.c
0x2nn in an *.S file:
0x201 in reg_u_add.S
0x202 in reg_u_div.S
0x203 in reg_u_div.S
0x204 in reg_u_div.S
0x205 in reg_u_mul.S
0x206 in reg_u_sub.S
0x207 in wm_sqrt.S
0x208 in reg_div.S
0x209 in reg_u_sub.S
0x210 in reg_u_sub.S
0x211 in reg_u_sub.S
0x212 in reg_u_sub.S
0x213 in wm_sqrt.S
0x214 in wm_sqrt.S
0x215 in wm_sqrt.S
0x220 in reg_norm.S
0x221 in reg_norm.S
0x230 in reg_round.S
0x231 in reg_round.S
0x232 in reg_round.S
0x233 in reg_round.S
0x234 in reg_round.S
0x235 in reg_round.S
0x236 in reg_round.S
0x240 in div_Xsig.S
0x241 in div_Xsig.S
0x242 in div_Xsig.S
*/
asmlinkage __visible void FPU_exception(int n)
{
int i, int_type;
int_type = 0; /* Needed only to stop compiler warnings */
if (n & EX_INTERNAL) {
int_type = n - EX_INTERNAL;
n = EX_INTERNAL;
/* Set lots of exception bits! */
partial_status |= (SW_Exc_Mask | SW_Summary | SW_Backward);
} else {
/* Extract only the bits which we use to set the status word */
n &= (SW_Exc_Mask);
/* Set the corresponding exception bit */
partial_status |= n;
/* Set summary bits iff exception isn't masked */
if (partial_status & ~control_word & CW_Exceptions)
partial_status |= (SW_Summary | SW_Backward);
if (n & (SW_Stack_Fault | EX_Precision)) {
if (!(n & SW_C1))
/* This bit distinguishes over- from underflow for a stack fault,
and roundup from round-down for precision loss. */
partial_status &= ~SW_C1;
}
}
RE_ENTRANT_CHECK_OFF;
if ((~control_word & n & CW_Exceptions) || (n == EX_INTERNAL)) {
/* Get a name string for error reporting */
for (i = 0; exception_names[i].type; i++)
if ((exception_names[i].type & n) ==
exception_names[i].type)
break;
if (exception_names[i].type) {
#ifdef PRINT_MESSAGES
printk("FP Exception: %s!\n", exception_names[i].name);
#endif /* PRINT_MESSAGES */
} else
printk("FPU emulator: Unknown Exception: 0x%04x!\n", n);
if (n == EX_INTERNAL) {
printk("FPU emulator: Internal error type 0x%04x\n",
int_type);
FPU_printall();
}
#ifdef PRINT_MESSAGES
else
FPU_printall();
#endif /* PRINT_MESSAGES */
/*
* The 80486 generates an interrupt on the next non-control FPU
* instruction. So we need some means of flagging it.
* We use the ES (Error Summary) bit for this.
*/
}
RE_ENTRANT_CHECK_ON;
#ifdef __DEBUG__
math_abort(FPU_info, SIGFPE);
#endif /* __DEBUG__ */
}
/* Real operation attempted on a NaN. */
/* Returns < 0 if the exception is unmasked */
int real_1op_NaN(FPU_REG *a)
{
int signalling, isNaN;
isNaN = (exponent(a) == EXP_OVER) && (a->sigh & 0x80000000);
/* The default result for the case of two "equal" NaNs (signs may
differ) is chosen to reproduce 80486 behaviour */
signalling = isNaN && !(a->sigh & 0x40000000);
if (!signalling) {
if (!isNaN) { /* pseudo-NaN, or other unsupported? */
if (control_word & CW_Invalid) {
/* Masked response */
reg_copy(&CONST_QNaN, a);
}
EXCEPTION(EX_Invalid);
return (!(control_word & CW_Invalid) ? FPU_Exception :
0) | TAG_Special;
}
return TAG_Special;
}
if (control_word & CW_Invalid) {
/* The masked response */
if (!(a->sigh & 0x80000000)) { /* pseudo-NaN ? */
reg_copy(&CONST_QNaN, a);
}
/* ensure a Quiet NaN */
a->sigh |= 0x40000000;
}
EXCEPTION(EX_Invalid);
return (!(control_word & CW_Invalid) ? FPU_Exception : 0) | TAG_Special;
}
/* Real operation attempted on two operands, one a NaN. */
/* Returns < 0 if the exception is unmasked */
int real_2op_NaN(FPU_REG const *b, u_char tagb,
int deststnr, FPU_REG const *defaultNaN)
{
FPU_REG *dest = &st(deststnr);
FPU_REG const *a = dest;
u_char taga = FPU_gettagi(deststnr);
FPU_REG const *x;
int signalling, unsupported;
if (taga == TAG_Special)
taga = FPU_Special(a);
if (tagb == TAG_Special)
tagb = FPU_Special(b);
/* TW_NaN is also used for unsupported data types. */
unsupported = ((taga == TW_NaN)
&& !((exponent(a) == EXP_OVER)
&& (a->sigh & 0x80000000)))
|| ((tagb == TW_NaN)
&& !((exponent(b) == EXP_OVER) && (b->sigh & 0x80000000)));
if (unsupported) {
if (control_word & CW_Invalid) {
/* Masked response */
FPU_copy_to_regi(&CONST_QNaN, TAG_Special, deststnr);
}
EXCEPTION(EX_Invalid);
return (!(control_word & CW_Invalid) ? FPU_Exception : 0) |
TAG_Special;
}
if (taga == TW_NaN) {
x = a;
if (tagb == TW_NaN) {
signalling = !(a->sigh & b->sigh & 0x40000000);
if (significand(b) > significand(a))
x = b;
else if (significand(b) == significand(a)) {
/* The default result for the case of two "equal" NaNs (signs may
differ) is chosen to reproduce 80486 behaviour */
x = defaultNaN;
}
} else {
/* return the quiet version of the NaN in a */
signalling = !(a->sigh & 0x40000000);
}
} else
#ifdef PARANOID
if (tagb == TW_NaN)
#endif /* PARANOID */
{
signalling = !(b->sigh & 0x40000000);
x = b;
}
#ifdef PARANOID
else {
signalling = 0;
EXCEPTION(EX_INTERNAL | 0x113);
x = &CONST_QNaN;
}
#endif /* PARANOID */
if ((!signalling) || (control_word & CW_Invalid)) {
if (!x)
x = b;
if (!(x->sigh & 0x80000000)) /* pseudo-NaN ? */
x = &CONST_QNaN;
FPU_copy_to_regi(x, TAG_Special, deststnr);
if (!signalling)
return TAG_Special;
/* ensure a Quiet NaN */
dest->sigh |= 0x40000000;
}
EXCEPTION(EX_Invalid);
return (!(control_word & CW_Invalid) ? FPU_Exception : 0) | TAG_Special;
}
/* Invalid arith operation on Valid registers */
/* Returns < 0 if the exception is unmasked */
asmlinkage __visible int arith_invalid(int deststnr)
{
EXCEPTION(EX_Invalid);
if (control_word & CW_Invalid) {
/* The masked response */
FPU_copy_to_regi(&CONST_QNaN, TAG_Special, deststnr);
}
return (!(control_word & CW_Invalid) ? FPU_Exception : 0) | TAG_Valid;
}
/* Divide a finite number by zero */
asmlinkage __visible int FPU_divide_by_zero(int deststnr, u_char sign)
{
FPU_REG *dest = &st(deststnr);
int tag = TAG_Valid;
if (control_word & CW_ZeroDiv) {
/* The masked response */
FPU_copy_to_regi(&CONST_INF, TAG_Special, deststnr);
setsign(dest, sign);
tag = TAG_Special;
}
EXCEPTION(EX_ZeroDiv);
return (!(control_word & CW_ZeroDiv) ? FPU_Exception : 0) | tag;
}
/* This may be called often, so keep it lean */
int set_precision_flag(int flags)
{
if (control_word & CW_Precision) {
partial_status &= ~(SW_C1 & flags);
partial_status |= flags; /* The masked response */
return 0;
} else {
EXCEPTION(flags);
return 1;
}
}
/* This may be called often, so keep it lean */
asmlinkage __visible void set_precision_flag_up(void)
{
if (control_word & CW_Precision)
partial_status |= (SW_Precision | SW_C1); /* The masked response */
else
EXCEPTION(EX_Precision | SW_C1);
}
/* This may be called often, so keep it lean */
asmlinkage __visible void set_precision_flag_down(void)
{
if (control_word & CW_Precision) { /* The masked response */
partial_status &= ~SW_C1;
partial_status |= SW_Precision;
} else
EXCEPTION(EX_Precision);
}
asmlinkage __visible int denormal_operand(void)
{
if (control_word & CW_Denormal) { /* The masked response */
partial_status |= SW_Denorm_Op;
return TAG_Special;
} else {
EXCEPTION(EX_Denormal);
return TAG_Special | FPU_Exception;
}
}
asmlinkage __visible int arith_overflow(FPU_REG *dest)
{
int tag = TAG_Valid;
if (control_word & CW_Overflow) {
/* The masked response */
/* ###### The response here depends upon the rounding mode */
reg_copy(&CONST_INF, dest);
tag = TAG_Special;
} else {
/* Subtract the magic number from the exponent */
addexponent(dest, (-3 * (1 << 13)));
}
EXCEPTION(EX_Overflow);
if (control_word & CW_Overflow) {
/* The overflow exception is masked. */
/* By definition, precision is lost.
The roundup bit (C1) is also set because we have
"rounded" upwards to Infinity. */
EXCEPTION(EX_Precision | SW_C1);
return tag;
}
return tag;
}
asmlinkage __visible int arith_underflow(FPU_REG *dest)
{
int tag = TAG_Valid;
if (control_word & CW_Underflow) {
/* The masked response */
if (exponent16(dest) <= EXP_UNDER - 63) {
reg_copy(&CONST_Z, dest);
partial_status &= ~SW_C1; /* Round down. */
tag = TAG_Zero;
} else {
stdexp(dest);
}
} else {
/* Add the magic number to the exponent. */
addexponent(dest, (3 * (1 << 13)) + EXTENDED_Ebias);
}
EXCEPTION(EX_Underflow);
if (control_word & CW_Underflow) {
/* The underflow exception is masked. */
EXCEPTION(EX_Precision);
return tag;
}
return tag;
}
void FPU_stack_overflow(void)
{
if (control_word & CW_Invalid) {
/* The masked response */
top--;
FPU_copy_to_reg0(&CONST_QNaN, TAG_Special);
}
EXCEPTION(EX_StackOver);
return;
}
void FPU_stack_underflow(void)
{
if (control_word & CW_Invalid) {
/* The masked response */
FPU_copy_to_reg0(&CONST_QNaN, TAG_Special);
}
EXCEPTION(EX_StackUnder);
return;
}
void FPU_stack_underflow_i(int i)
{
if (control_word & CW_Invalid) {
/* The masked response */
FPU_copy_to_regi(&CONST_QNaN, TAG_Special, i);
}
EXCEPTION(EX_StackUnder);
return;
}
void FPU_stack_underflow_pop(int i)
{
if (control_word & CW_Invalid) {
/* The masked response */
FPU_copy_to_regi(&CONST_QNaN, TAG_Special, i);
FPU_pop();
}
EXCEPTION(EX_StackUnder);
return;
}