linux-stable/drivers/usb/musb/ux500_dma.c
Linus Torvalds 9cd11c0c47 ARM: soc: multiplatform enablement
This is a pretty significant branch. It's the introduction of the
 first multiplatform support on ARM, and with this (and the later
 branch) merged, it is now possible to build one kernel that contains
 support for highbank, vexpress, mvebu, socfpga, and picoxcell. More
 platforms will be convered over in the next few releases.
 
 Two critical last things had to be done for this to be practical and
 possible:
 * Today each platform has its own include directory under
   mach-<mach>/include/mach/*, and traditionally that is where a lot of
   driver/platform shared definitions have gone, such as platform data
   structures. They now need to move out to a common location instead,
   and this branch moves a large number of those out to
   include/linux/platform_data.
 * Each platform used to list the device trees to compile for its
   boards in mach-<mach>/Makefile.boot.
 
 Both of the above changes will mean that there are some merge
 conflicts to come (and some to resolve here). It's a one-time move and
 once it settles in, we should be good for quite a while. Sorry for the
 overhead.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQaO7aAAoJEIwa5zzehBx3bUIP/02U8PhkHJJrrowyIsWRBOql
 7LPJ53PRRgrpBdmEGzFD3TO3zaNyrjQRbYgNDvzHMO6NAMNvdRFouuWYjO11/tuB
 i32zssXCC+eUOEgbAo/U/lYq+UOvqw9gv6mU+3+i3OcGEhdKOaoT/DSLPQC4hoDm
 222TeLfFB3HJXu5n720dEQ9V3fO6TS1+bbh8TU3cjHqzceXsOrffZqOA5CQxUcRr
 KWwOjA0nALDwWcqgv45GJNwY3GTyAQ/hPMQavnuWK0voJ+qUYk5HftKocAK7C+py
 0T0OFOAHTwtyhvzJBxLC84M6Ox465BYXyeNjIB+2nG/Um9+mDoP0dnWpGy4c7DMU
 P5hyqbeLGeqjUXQuYtRmgMMc3UeHKoUGAfXW9eMsjLa6/M4NLGv//7E7LbZPpgMZ
 obkjwuesmcaYn/FRyj/yFmC35YlF4oCLziVzEtURZw3eKHHSUlhkTDSMNnkcZ0kZ
 Vv7kFxnD2Y46ixiwSJv30ErQnVkgI3MdqDlDxkE8r5+phYuK4gCrNaJtiwRh/oNw
 cFhpPxKuA0sJ9b6YRTzjC45eT/XZomEEr/uifCFeRNaCquyjYP00Mm8F0flSqwx9
 zi+emzPAwNmk1bvxMUM/idGnaj0V4p+BAYUAvkbSoqU1p1flzyhU88fGTSIyKOt6
 K5TCDS2v5hrVykK9TDwl
 =Tc6y
 -----END PGP SIGNATURE-----

Merge tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc multiplatform enablement from Olof Johansson:
 "This is a pretty significant branch.  It's the introduction of the
  first multiplatform support on ARM, and with this (and the later
  branch) merged, it is now possible to build one kernel that contains
  support for highbank, vexpress, mvebu, socfpga, and picoxcell.  More
  platforms will be convered over in the next few releases.

  Two critical last things had to be done for this to be practical and
  possible:
   * Today each platform has its own include directory under
     mach-<mach>/include/mach/*, and traditionally that is where a lot
     of driver/platform shared definitions have gone, such as platform
     data structures.  They now need to move out to a common location
     instead, and this branch moves a large number of those out to
     include/linux/platform_data.
   * Each platform used to list the device trees to compile for its
     boards in mach-<mach>/Makefile.boot.

  Both of the above changes will mean that there are some merge
  conflicts to come (and some to resolve here).  It's a one-time move
  and once it settles in, we should be good for quite a while.  Sorry
  for the overhead."

Fix conflicts as per Olof.

* tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits)
  ARM: add v7 multi-platform defconfig
  ARM: msm: Move core.h contents into common.h
  ARM: highbank: call highbank_pm_init from .init_machine
  ARM: dtb: move all dtb targets to common Makefile
  ARM: spear: move platform_data definitions
  ARM: samsung: move platform_data definitions
  ARM: orion: move platform_data definitions
  ARM: vexpress: convert to multi-platform
  ARM: initial multiplatform support
  ARM: mvebu: move armada-370-xp.h in mach dir
  ARM: vexpress: remove dependency on mach/* headers
  ARM: picoxcell: remove dependency on mach/* headers
  ARM: move all dtb targets out of Makefile.boot
  ARM: picoxcell: move debug macros to include/debug
  ARM: socfpga: move debug macros to include/debug
  ARM: mvebu: move debug macros to include/debug
  ARM: vexpress: move debug macros to include/debug
  ARM: highbank: move debug macros to include/debug
  ARM: move debug macros to common location
  ARM: make mach/gpio.h headers optional
  ...
2012-10-01 19:11:38 -07:00

393 lines
11 KiB
C

/*
* drivers/usb/musb/ux500_dma.c
*
* U8500 and U5500 DMA support code
*
* Copyright (C) 2009 STMicroelectronics
* Copyright (C) 2011 ST-Ericsson SA
* Authors:
* Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
* Praveena Nadahally <praveen.nadahally@stericsson.com>
* Rajaram Regupathy <ragupathy.rajaram@stericsson.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/pfn.h>
#include <linux/platform_data/usb-musb-ux500.h>
#include "musb_core.h"
struct ux500_dma_channel {
struct dma_channel channel;
struct ux500_dma_controller *controller;
struct musb_hw_ep *hw_ep;
struct dma_chan *dma_chan;
unsigned int cur_len;
dma_cookie_t cookie;
u8 ch_num;
u8 is_tx;
u8 is_allocated;
};
struct ux500_dma_controller {
struct dma_controller controller;
struct ux500_dma_channel rx_channel[UX500_MUSB_DMA_NUM_RX_CHANNELS];
struct ux500_dma_channel tx_channel[UX500_MUSB_DMA_NUM_TX_CHANNELS];
u32 num_rx_channels;
u32 num_tx_channels;
void *private_data;
dma_addr_t phy_base;
};
/* Work function invoked from DMA callback to handle rx transfers. */
void ux500_dma_callback(void *private_data)
{
struct dma_channel *channel = private_data;
struct ux500_dma_channel *ux500_channel = channel->private_data;
struct musb_hw_ep *hw_ep = ux500_channel->hw_ep;
struct musb *musb = hw_ep->musb;
unsigned long flags;
dev_dbg(musb->controller, "DMA rx transfer done on hw_ep=%d\n",
hw_ep->epnum);
spin_lock_irqsave(&musb->lock, flags);
ux500_channel->channel.actual_len = ux500_channel->cur_len;
ux500_channel->channel.status = MUSB_DMA_STATUS_FREE;
musb_dma_completion(musb, hw_ep->epnum,
ux500_channel->is_tx);
spin_unlock_irqrestore(&musb->lock, flags);
}
static bool ux500_configure_channel(struct dma_channel *channel,
u16 packet_sz, u8 mode,
dma_addr_t dma_addr, u32 len)
{
struct ux500_dma_channel *ux500_channel = channel->private_data;
struct musb_hw_ep *hw_ep = ux500_channel->hw_ep;
struct dma_chan *dma_chan = ux500_channel->dma_chan;
struct dma_async_tx_descriptor *dma_desc;
enum dma_transfer_direction direction;
struct scatterlist sg;
struct dma_slave_config slave_conf;
enum dma_slave_buswidth addr_width;
dma_addr_t usb_fifo_addr = (MUSB_FIFO_OFFSET(hw_ep->epnum) +
ux500_channel->controller->phy_base);
struct musb *musb = ux500_channel->controller->private_data;
dev_dbg(musb->controller,
"packet_sz=%d, mode=%d, dma_addr=0x%x, len=%d is_tx=%d\n",
packet_sz, mode, dma_addr, len, ux500_channel->is_tx);
ux500_channel->cur_len = len;
sg_init_table(&sg, 1);
sg_set_page(&sg, pfn_to_page(PFN_DOWN(dma_addr)), len,
offset_in_page(dma_addr));
sg_dma_address(&sg) = dma_addr;
sg_dma_len(&sg) = len;
direction = ux500_channel->is_tx ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM;
addr_width = (len & 0x3) ? DMA_SLAVE_BUSWIDTH_1_BYTE :
DMA_SLAVE_BUSWIDTH_4_BYTES;
slave_conf.direction = direction;
slave_conf.src_addr = usb_fifo_addr;
slave_conf.src_addr_width = addr_width;
slave_conf.src_maxburst = 16;
slave_conf.dst_addr = usb_fifo_addr;
slave_conf.dst_addr_width = addr_width;
slave_conf.dst_maxburst = 16;
slave_conf.device_fc = false;
dma_chan->device->device_control(dma_chan, DMA_SLAVE_CONFIG,
(unsigned long) &slave_conf);
dma_desc = dmaengine_prep_slave_sg(dma_chan, &sg, 1, direction,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!dma_desc)
return false;
dma_desc->callback = ux500_dma_callback;
dma_desc->callback_param = channel;
ux500_channel->cookie = dma_desc->tx_submit(dma_desc);
dma_async_issue_pending(dma_chan);
return true;
}
static struct dma_channel *ux500_dma_channel_allocate(struct dma_controller *c,
struct musb_hw_ep *hw_ep, u8 is_tx)
{
struct ux500_dma_controller *controller = container_of(c,
struct ux500_dma_controller, controller);
struct ux500_dma_channel *ux500_channel = NULL;
struct musb *musb = controller->private_data;
u8 ch_num = hw_ep->epnum - 1;
u32 max_ch;
/* Max 8 DMA channels (0 - 7). Each DMA channel can only be allocated
* to specified hw_ep. For example DMA channel 0 can only be allocated
* to hw_ep 1 and 9.
*/
if (ch_num > 7)
ch_num -= 8;
max_ch = is_tx ? controller->num_tx_channels :
controller->num_rx_channels;
if (ch_num >= max_ch)
return NULL;
ux500_channel = is_tx ? &(controller->tx_channel[ch_num]) :
&(controller->rx_channel[ch_num]) ;
/* Check if channel is already used. */
if (ux500_channel->is_allocated)
return NULL;
ux500_channel->hw_ep = hw_ep;
ux500_channel->is_allocated = 1;
dev_dbg(musb->controller, "hw_ep=%d, is_tx=0x%x, channel=%d\n",
hw_ep->epnum, is_tx, ch_num);
return &(ux500_channel->channel);
}
static void ux500_dma_channel_release(struct dma_channel *channel)
{
struct ux500_dma_channel *ux500_channel = channel->private_data;
struct musb *musb = ux500_channel->controller->private_data;
dev_dbg(musb->controller, "channel=%d\n", ux500_channel->ch_num);
if (ux500_channel->is_allocated) {
ux500_channel->is_allocated = 0;
channel->status = MUSB_DMA_STATUS_FREE;
channel->actual_len = 0;
}
}
static int ux500_dma_is_compatible(struct dma_channel *channel,
u16 maxpacket, void *buf, u32 length)
{
if ((maxpacket & 0x3) ||
((int)buf & 0x3) ||
(length < 512) ||
(length & 0x3))
return false;
else
return true;
}
static int ux500_dma_channel_program(struct dma_channel *channel,
u16 packet_sz, u8 mode,
dma_addr_t dma_addr, u32 len)
{
int ret;
BUG_ON(channel->status == MUSB_DMA_STATUS_UNKNOWN ||
channel->status == MUSB_DMA_STATUS_BUSY);
if (!ux500_dma_is_compatible(channel, packet_sz, (void *)dma_addr, len))
return false;
channel->status = MUSB_DMA_STATUS_BUSY;
channel->actual_len = 0;
ret = ux500_configure_channel(channel, packet_sz, mode, dma_addr, len);
if (!ret)
channel->status = MUSB_DMA_STATUS_FREE;
return ret;
}
static int ux500_dma_channel_abort(struct dma_channel *channel)
{
struct ux500_dma_channel *ux500_channel = channel->private_data;
struct ux500_dma_controller *controller = ux500_channel->controller;
struct musb *musb = controller->private_data;
void __iomem *epio = musb->endpoints[ux500_channel->hw_ep->epnum].regs;
u16 csr;
dev_dbg(musb->controller, "channel=%d, is_tx=%d\n",
ux500_channel->ch_num, ux500_channel->is_tx);
if (channel->status == MUSB_DMA_STATUS_BUSY) {
if (ux500_channel->is_tx) {
csr = musb_readw(epio, MUSB_TXCSR);
csr &= ~(MUSB_TXCSR_AUTOSET |
MUSB_TXCSR_DMAENAB |
MUSB_TXCSR_DMAMODE);
musb_writew(epio, MUSB_TXCSR, csr);
} else {
csr = musb_readw(epio, MUSB_RXCSR);
csr &= ~(MUSB_RXCSR_AUTOCLEAR |
MUSB_RXCSR_DMAENAB |
MUSB_RXCSR_DMAMODE);
musb_writew(epio, MUSB_RXCSR, csr);
}
ux500_channel->dma_chan->device->
device_control(ux500_channel->dma_chan,
DMA_TERMINATE_ALL, 0);
channel->status = MUSB_DMA_STATUS_FREE;
}
return 0;
}
static int ux500_dma_controller_stop(struct dma_controller *c)
{
struct ux500_dma_controller *controller = container_of(c,
struct ux500_dma_controller, controller);
struct ux500_dma_channel *ux500_channel;
struct dma_channel *channel;
u8 ch_num;
for (ch_num = 0; ch_num < controller->num_rx_channels; ch_num++) {
channel = &controller->rx_channel[ch_num].channel;
ux500_channel = channel->private_data;
ux500_dma_channel_release(channel);
if (ux500_channel->dma_chan)
dma_release_channel(ux500_channel->dma_chan);
}
for (ch_num = 0; ch_num < controller->num_tx_channels; ch_num++) {
channel = &controller->tx_channel[ch_num].channel;
ux500_channel = channel->private_data;
ux500_dma_channel_release(channel);
if (ux500_channel->dma_chan)
dma_release_channel(ux500_channel->dma_chan);
}
return 0;
}
static int ux500_dma_controller_start(struct dma_controller *c)
{
struct ux500_dma_controller *controller = container_of(c,
struct ux500_dma_controller, controller);
struct ux500_dma_channel *ux500_channel = NULL;
struct musb *musb = controller->private_data;
struct device *dev = musb->controller;
struct musb_hdrc_platform_data *plat = dev->platform_data;
struct ux500_musb_board_data *data = plat->board_data;
struct dma_channel *dma_channel = NULL;
u32 ch_num;
u8 dir;
u8 is_tx = 0;
void **param_array;
struct ux500_dma_channel *channel_array;
u32 ch_count;
dma_cap_mask_t mask;
if ((data->num_rx_channels > UX500_MUSB_DMA_NUM_RX_CHANNELS) ||
(data->num_tx_channels > UX500_MUSB_DMA_NUM_TX_CHANNELS))
return -EINVAL;
controller->num_rx_channels = data->num_rx_channels;
controller->num_tx_channels = data->num_tx_channels;
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
/* Prepare the loop for RX channels */
channel_array = controller->rx_channel;
ch_count = data->num_rx_channels;
param_array = data->dma_rx_param_array;
for (dir = 0; dir < 2; dir++) {
for (ch_num = 0; ch_num < ch_count; ch_num++) {
ux500_channel = &channel_array[ch_num];
ux500_channel->controller = controller;
ux500_channel->ch_num = ch_num;
ux500_channel->is_tx = is_tx;
dma_channel = &(ux500_channel->channel);
dma_channel->private_data = ux500_channel;
dma_channel->status = MUSB_DMA_STATUS_FREE;
dma_channel->max_len = SZ_16M;
ux500_channel->dma_chan = dma_request_channel(mask,
data->dma_filter,
param_array[ch_num]);
if (!ux500_channel->dma_chan) {
ERR("Dma pipe allocation error dir=%d ch=%d\n",
dir, ch_num);
/* Release already allocated channels */
ux500_dma_controller_stop(c);
return -EBUSY;
}
}
/* Prepare the loop for TX channels */
channel_array = controller->tx_channel;
ch_count = data->num_tx_channels;
param_array = data->dma_tx_param_array;
is_tx = 1;
}
return 0;
}
void dma_controller_destroy(struct dma_controller *c)
{
struct ux500_dma_controller *controller = container_of(c,
struct ux500_dma_controller, controller);
kfree(controller);
}
struct dma_controller *__devinit
dma_controller_create(struct musb *musb, void __iomem *base)
{
struct ux500_dma_controller *controller;
struct platform_device *pdev = to_platform_device(musb->controller);
struct resource *iomem;
controller = kzalloc(sizeof(*controller), GFP_KERNEL);
if (!controller)
return NULL;
controller->private_data = musb;
/* Save physical address for DMA controller. */
iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
controller->phy_base = (dma_addr_t) iomem->start;
controller->controller.start = ux500_dma_controller_start;
controller->controller.stop = ux500_dma_controller_stop;
controller->controller.channel_alloc = ux500_dma_channel_allocate;
controller->controller.channel_release = ux500_dma_channel_release;
controller->controller.channel_program = ux500_dma_channel_program;
controller->controller.channel_abort = ux500_dma_channel_abort;
controller->controller.is_compatible = ux500_dma_is_compatible;
return &controller->controller;
}