linux-stable/arch/arm/mach-omap2/gpmc-nand.c
Tony Lindgren e639cd5bfc ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header
We still need to support platform data for omap3 until it's booting
in device tree only mode. So let's add platform_data/omap-gpmc.h for
that, and a minimal linux/omap-gpmc.h for the save and restore used
by the PM code.

Let's also keep a minimal mach-omap2/gpmc.h still around to avoid
churn on the board-*.c files. Once omap3 boots in device tree only
mode, we can drop mach-omap2/gpmc.h and we can make the data
structures in platform_data/omap-gpmc.h private to the GPMC driver.

Note that we can now also remove gpmc-nand.h and gpmc-onenand.h.

Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-20 12:11:25 -08:00

157 lines
4 KiB
C

/*
* gpmc-nand.c
*
* Copyright (C) 2009 Texas Instruments
* Vimal Singh <vimalsingh@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/omap-gpmc.h>
#include <linux/mtd/nand.h>
#include <linux/platform_data/mtd-nand-omap2.h>
#include <asm/mach/flash.h>
#include "soc.h"
/* minimum size for IO mapping */
#define NAND_IO_SIZE 4
static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
{
/* platforms which support all ECC schemes */
if (soc_is_am33xx() || soc_is_am43xx() || cpu_is_omap44xx() ||
soc_is_omap54xx() || soc_is_dra7xx())
return 1;
if (ecc_opt == OMAP_ECC_BCH4_CODE_HW_DETECTION_SW ||
ecc_opt == OMAP_ECC_BCH8_CODE_HW_DETECTION_SW) {
if (cpu_is_omap24xx())
return 0;
else if (cpu_is_omap3630() && (GET_OMAP_REVISION() == 0))
return 0;
else
return 1;
}
/* OMAP3xxx do not have ELM engine, so cannot support ECC schemes
* which require H/W based ECC error detection */
if ((cpu_is_omap34xx() || cpu_is_omap3630()) &&
((ecc_opt == OMAP_ECC_BCH4_CODE_HW) ||
(ecc_opt == OMAP_ECC_BCH8_CODE_HW)))
return 0;
/* legacy platforms support only HAM1 (1-bit Hamming) ECC scheme */
if (ecc_opt == OMAP_ECC_HAM1_CODE_HW ||
ecc_opt == OMAP_ECC_HAM1_CODE_SW)
return 1;
else
return 0;
}
/* This function will go away once the device-tree convertion is complete */
static void gpmc_set_legacy(struct omap_nand_platform_data *gpmc_nand_data,
struct gpmc_settings *s)
{
/* Enable RD PIN Monitoring Reg */
if (gpmc_nand_data->dev_ready) {
s->wait_on_read = true;
s->wait_on_write = true;
}
if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16)
s->device_width = GPMC_DEVWIDTH_16BIT;
else
s->device_width = GPMC_DEVWIDTH_8BIT;
}
int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
struct gpmc_timings *gpmc_t)
{
int err = 0;
struct gpmc_settings s;
struct platform_device *pdev;
struct resource gpmc_nand_res[] = {
{ .flags = IORESOURCE_MEM, },
{ .flags = IORESOURCE_IRQ, },
{ .flags = IORESOURCE_IRQ, },
};
BUG_ON(gpmc_nand_data->cs >= GPMC_CS_NUM);
err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE,
(unsigned long *)&gpmc_nand_res[0].start);
if (err < 0) {
pr_err("omap2-gpmc: Cannot request GPMC CS %d, error %d\n",
gpmc_nand_data->cs, err);
return err;
}
gpmc_nand_res[0].end = gpmc_nand_res[0].start + NAND_IO_SIZE - 1;
gpmc_nand_res[1].start = gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE);
gpmc_nand_res[2].start = gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT);
if (gpmc_t) {
err = gpmc_cs_set_timings(gpmc_nand_data->cs, gpmc_t);
if (err < 0) {
pr_err("omap2-gpmc: Unable to set gpmc timings: %d\n", err);
return err;
}
}
memset(&s, 0, sizeof(struct gpmc_settings));
if (gpmc_nand_data->of_node)
gpmc_read_settings_dt(gpmc_nand_data->of_node, &s);
else
gpmc_set_legacy(gpmc_nand_data, &s);
s.device_nand = true;
err = gpmc_cs_program_settings(gpmc_nand_data->cs, &s);
if (err < 0)
goto out_free_cs;
err = gpmc_configure(GPMC_CONFIG_WP, 0);
if (err < 0)
goto out_free_cs;
gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs);
if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt)) {
pr_err("omap2-nand: Unsupported NAND ECC scheme selected\n");
err = -EINVAL;
goto out_free_cs;
}
pdev = platform_device_alloc("omap2-nand", gpmc_nand_data->cs);
if (pdev) {
err = platform_device_add_resources(pdev, gpmc_nand_res,
ARRAY_SIZE(gpmc_nand_res));
if (!err)
pdev->dev.platform_data = gpmc_nand_data;
} else {
err = -ENOMEM;
}
if (err)
goto out_free_pdev;
err = platform_device_add(pdev);
if (err) {
dev_err(&pdev->dev, "Unable to register NAND device\n");
goto out_free_pdev;
}
return 0;
out_free_pdev:
platform_device_put(pdev);
out_free_cs:
gpmc_cs_free(gpmc_nand_data->cs);
return err;
}